1000/1000

Hot
Most Recent

Submitted Successfully!

To reward your contribution, here is a gift for you: A free trial for our video production service.

Thank you for your contribution! You can also upload a video entry or images related to this topic.

Do you have a full video?

Are you sure to Delete?

Cite

If you have any further questions, please contact Encyclopedia Editorial Office.

Morozov, O.; Sakhabutdinov, A.; Anfinogentov, V.; Misbakhov, R.; Kuznetsov, A.; Agliullin, T. Multi-Addressed Fiber Bragg Structures. Encyclopedia. Available online: https://encyclopedia.pub/entry/1054 (accessed on 08 August 2024).

Morozov O, Sakhabutdinov A, Anfinogentov V, Misbakhov R, Kuznetsov A, Agliullin T. Multi-Addressed Fiber Bragg Structures. Encyclopedia. Available at: https://encyclopedia.pub/entry/1054. Accessed August 08, 2024.

Morozov, Oleg, Airat Sakhabutdinov, Vladimir Anfinogentov, Rinat Misbakhov, Artem Kuznetsov, Timur Agliullin. "Multi-Addressed Fiber Bragg Structures" *Encyclopedia*, https://encyclopedia.pub/entry/1054 (accessed August 08, 2024).

Morozov, O., Sakhabutdinov, A., Anfinogentov, V., Misbakhov, R., Kuznetsov, A., & Agliullin, T. (2020, June 11). Multi-Addressed Fiber Bragg Structures. In *Encyclopedia*. https://encyclopedia.pub/entry/1054

Morozov, Oleg, et al. "Multi-Addressed Fiber Bragg Structures." *Encyclopedia*. Web. 11 June, 2020.

Copy Citation

The entry presents the concept of Multi-Addressed Fiber Bragg Structures (MAFBS) and their usage in Microwave Photonic Sensor Systems (MPSS). The theory of MAFBS is the logical evolution of the theory of Addressed Fiber Bragg Structures (AFBS), which implement a microwave-photonic tecnique for their interrogation. The MAFBS is a special type of Fiber Bragg Grating (FBG), the reflection spectrum of which has three (or more) narrow notches. The frequencies of narrow notches are located in infrared range of electromagnetic spectrum, while differences between them – in microwave frequency range. All cross-differences between optical frequencies of single MAFBS are called address frequencies set. When the additive optical response from a single MAFBS, passing through optical filter with oblique frequency response, is received by a photodetector, the complex electrical signal, which consists of all cross-frequency beatings of all optical frequencies, is taken at its output. This complex electrical signal at the photodetector’s output contains enough information to determine the central frequency shift of the MAFBS.

fiber Bagg grating
microwave-photonic sensor system
addressed fiber Bragg structures
multi-addressed fiber Bragg structures
fiber-optic sensor

Common problems of Fiber Bragg Gratings (FBG) array interrogation in sensor systems are the complexity and the high cost of interrogators due to the technique of interrogation and FBG multiplexing ^{[1]}^{[2]}^{[3]}^{[4]}^{[5]}. Wavelength^{[1]}, time^{[2]}, frequency^{[3]}, polarizing^{[4]}, and spatial^{[5]} division multiplexing requires using complex devices, such as spectrum analyzers, spectrometers with tunable Fabry–Perot interferometers, diffraction gratings, etc. All of them use the technique of optic signal receiving on charge-coupled devices with its further complex analysis. The complexity is also caused by the fact that these sensors are not addressable per se, and therefore, any spectrum overlapping leads to interrogation errors^{[6]}^{[7]}^{[8]}.

In parallel with multiplexing methods and microwave-photonic methods, the optical pulse-coding, phase-coding, low coherent interferometer with the cascaded FBGs methods have been developed. The coding methods allow to recognize two or more FBGs with the same spectral range^{[9]}^{[10]}^{[11]}^{[12]}. Spectral-coding sensors are based on code-multiplexing technology^{[11]}^{[12]}, where the interrogation is conducted in real time according to autocorrelation between sensor spectra and its code signature. A number of works demonstrated that the spectral-amplitude-coding method with super-structured FBG sensors based on discrete prolate spheroidal sequences can be useful even in the case of their optical ranges overlapping^{[13]}^{[14]}^{[15]}^{[16]}.

An easier solution was found in the Addressed Fiber Bragg Structure (AFBS) usage with the microwave photonics interrogation method^{[17]}. An AFBS is a special type of FBG, the reflection spectrum of which has two narrow notches. The light passing through AFBS has two narrow optical frequencies, the difference between which is much less than an optical frequency (THz) and is located in microwave range (GHz). The difference frequency is called the address frequency of an AFBS. The address frequency is invariant to strain or temperature fields; moreover, it is invariant to AFBS central frequency shifting. The AFBS in sensor systems is used both as a two-frequency source (due to the fact that it has two narrow optical frequencies with the difference between them being in the microwave range) and as a sensor of measurement system (due to the fact that its address frequency is invariant to measurable fields) simultaneously. It allows to design a microwave-photonic sensor system based on arrays of AFBSs, on condition that the set of address frequencies in the array is orthogonal^{[17]}^{[18]}.

A multi-addressed fiber Bragg structure (MAFBS) is a special type of FBG, similar to AFBS, the reflection spectrum of which has three (or more) narrow notches. The light, having passed through a MAFBS, has three (or more) narrow optical frequencies, the difference between which is much less than an optical frequency (THz), and it is located in microwave range (GHz). The set of all differential frequencies is called the address frequencies set of a MAFBS. The address frequencies set is invariant to strain or temperature fields, and it is also invariant to central frequency shifting^{[17]}^{[18]}^{[19]}^{[20]}. The MAFBS serves both a multi-frequency source and a sensor of measurement system at the same time. It is necessary to require the additional conditions to use a MAFBS as a sensor in a sensor system, namely: the light only from MAFBS’s narrow band frequencies must trap into the light analysis area for the whole MAFBS central frequency shift range, which corresponds to the measurement range^{[17]}^{[18]}^{[19]}^{[20]}.

There are at least two approaches to the MAFBS (as well as AFBS) forming: the first of them is the introduction of phase π‑shifts into the classic FBG periodic structure^{[21]} (Figure 1,a), and the second one is the MAFBS forming as a set of ultra-narrowband FBGs^{[17]} (Figure 1,b).

**(a)** **(b)**

**Figure 1.** Amplitude-frequency diagrams: (**a**) transmitted through MAFBS, formed using FBG with π-shifts; (**b**) reflected from MAFBS, formed as a set of ultra-narrowband FBGs.

An example of the optoelectronic scheme for MAFBS interrogation is presented in Figure 2. The optic source – **1** forms finite band light (**a**), which passes through MAFBS – **2** and forms multi-frequency (in this case three-frequency) signal (**c**); the three-frequency optic signal, passing through optic filter with oblique amplitude-frequency characteristic – **3**, forms asymmetric three-frequency optic signal (**d**), which is received on a photodetector – **4**; after the photodetector, signal is received by an analog-to-digital converter – **5**, and its subsequent analysis is performed. The system also includes the reference channel, in which the optic signal is received on a photodetector – **7** directly after the MAFBS without its asymmetrical deformation in the filter, and then the signal is processed using the analog-to-digital converter – **8**. All subsequent calculations are carried out with the ratios of values in the measuring and reference channels. It allows to eliminate the influence of light power fluctuation that is not caused by the MAFBS central frequency shifting.

**Figure 2.** An interrogation scheme of a single MAFBS.

The shape of a MAFBS spectral response at the output end of the optic filter with oblique amplitude-frequency characteristic is shown in Figure 3, where the following notation is used: ω_{1}, ω_{2} and ω_{3} are the frequencies of optical carriers; Ω_{21} and Ω_{32} are the address frequencies; *k* and *b* are the predefined parameters of the optic filter with an oblique amplitude-frequency characteristic.

**Figure 3.** A spectral response of Multi-Addressed Fiber Bragg Structure.

The central frequency shift of the MAFBS leads to a change of the mutual relation of the optical carriers’ amplitudes, which causes a change of the beating parameters at the address frequencies Ω_{21}, Ω_{32} and their sum Ω_{31} = Ω_{21} + Ω_{32}. The task of interrogation is to determine the MAFBS central frequency (or any of the frequencies ω_{1}, ω_{2}, or ω_{3}), using the known parameters of the beating at the address frequencies set.

The light response from the MAFBS, which passes through the filter with oblique frequency response, can be written as:

where *A*_{1}, *A*_{2}, *A*_{3} are the amplitudes, , , are the initial phases of the signal at the optical frequencies ω_{1}, ω_{2 }and ω_{3}. The output current of the photodetector *F*(*t*) is proportional to the square of the optic response:

in which the oscillations at optical (terahertz) frequencies are excluded^{[17]}^{[18]}. The known values in (2) are the address frequencies Ω_{21}, Ω_{32}. The constant signal level in (2), the amplitudes at the address frequencies Ω_{21}, Ω_{32}, and their sum Ω_{31} give four independent equations for three unknown amplitudes *A*_{1}, *A*_{2} and *A*_{3} determination:

where *D*_{0}, *D*_{21}, *D*_{32} and *D*_{31 }are the measured values of constant signal level, amplitudes of the address frequencies Ω_{21}, Ω_{32}, and their sum Ω_{31}, respectively.

The resulting system of four equations is overdetermined, since the number of equations exceeds the number of unknowns. Moreover, equations system (3) must be supplemented by the requirements that the points (ω_{1}, *A*_{1}), (ω_{2}, *A*_{2}), (ω_{3}, *A*_{3}) belong to the same line:

Equation (4) describes the filter with an oblique amplitude-frequency characteristic. Moreover, it is necessary to require that the differences ω_{2} – ω_{1}, ω_{3} – ω_{2} are equal to the address frequencies Ω_{21}, Ω_{32}, respectively, and the condition ω_{3} – ω_{1} = Ω_{32 }+Ω_{21} would also be automatically satisfied. Thereby, it is necessary to include the additional relation to the equations system (3):

which binds the task parameters, imposing restrictions of finding a solution, while simultaneously describing the mutual relations between the frequencies. Having the amplitudes *A*_{1}, *A*_{2} and *A*_{3} from the equations system (3), supplemented by the relation (5), and using the known values of the parameters *k* and *b* of the filter with an oblique linear amplitude-frequency characteristic, one can calculate the MAFBS frequencies ω_{1}, ω_{2} and ω_{3}.

There are different ways to define the MAFBS central frequency, since MAFBS has three narrow resonances in addition to its main Bragg resonance. We used the definition of the central frequency of MAFBS as an average according to the formula:

which explicitly determines the position of the MAFBS.

The overdetermined equations system can be solved by searching the conditional extremum of the function:

relatively to the restriction:

requiring a minimum of the Lagrange function expressed in the form:

where λ is the Lagrange multiplier.

The expression (9) is equivalent to the requirement that all partial derivatives with respect to the variables *A*_{1}, *A*_{2}, *A*_{3} and λ are equal to zero, which leads to a set of four nonlinear equations:

where the partial derivatives ∂Φ/∂*A _{i}* are not expressed due to their obvious simplicity.

Nonlinear equations system (10) (due to the nonlinearity of the partial derivatives ∂Φ/∂*A _{i }*,

After that, the equations system (10), supplemented by the initial values (11), is solved by any well-converging iterative method, for example, the Levenberg-Marquardt^{[22]}^{[23]} or Newton-Raphson^{[24]} methods.

The equations system (10) solution gives the values of the amplitudes *A*_{1}, *A*_{2}, *A*_{3}, each of them can be used to determine the MAFBS central frequency position relative to the filter with an oblique amplitude-frequency characteristic. Substituting the found values of the amplitudes *A*_{1}, *A*_{2}, *A*_{3} in (4), and combining them in (6), we obtain the expression for the central frequency of the MAFBS:

which is a function of the measured values of *D*_{0}, *D*_{21}, *D*_{32} and *D*_{31 }– a constant signal level, amplitudes at address frequencies Ω_{21}, Ω_{32}, and their sum Ω_{31}, respectively.

A concept of multi-addressed fiber Bragg structures and mathematical formulation of its interrogation principle is presented. The optoelectronic interrogation system is significantly simplified in comparison with other approaches. The original article includes the simulation results, which clearly demonstrate that the proposed method of the MAFBS central frequency determination is two orders of magnitude more precise than the method based on the generalized modulation factor. It was shown that the suggested method of MAFBS usage in MPSS satisfies accuracy requirements, has potential for further development and allows to move to an experimental research step.

- R M Measures; S Melle; K Liu; Wavelength demodulated Bragg grating fiber optic sensing systems for addressing smart structure critical issues.
*Smart Materials and Structures***1992**,*1*, 36-44, 10.1088/0964-1726/1/1/006. - Michael A. Davis; David G. Bellemore; Alan D. Kersey; Structural strain mapping using a wavelength/time division addressed fiber Bragg grating array.
*Smart Structures and Materials: Second European Conference***1994**,*2361*, 342-346, 10.1117/12.184861. - V.P. Matveenko; Igor Shardakov; A. A. Voronkov; Natalia Kosheleva; D.S. Lobanov; Grigorii Serovaev; E.M. Spaskova; G. S. Shipunov; Measurement of strains by optical fiber Bragg grating sensors embedded into polymer composite material.
*Structural Control and Health Monitoring***2017**,*25*, e2118, 10.1002/stc.2118. - Xueguang Qiao; Zhihua Shao; Weijia Bao; Qiangzhou Rong; Fiber Bragg Grating Sensors for the Oil Industry.
*Sensors***2017**,*17*, 429, 10.3390/s17030429. - Zhen Ma; Xiyuan Chen; Fiber Bragg Gratings Sensors for Aircraft Wing Shape Measurement: Recent Applications and Technical Analysis.
*Sensors***2018**,*19*, 55, 10.3390/s19010055. - Karim, F. . Full Matlab code for synthesis and optimization of Bragg gratings ; Cambridge Scholars Publishing: Newcastle upon Tyne, 2019; pp. 24.
- Gabriel Cormier; Roger Boudreau; Sylvain Thériault; Real-coded genetic algorithm for Bragg grating parameter synthesis.
*Journal of the Optical Society of America B***2001**,*18*, 1771, 10.1364/josab.18.001771. - Kuo Li; Review of the Strain Modulation Methods Used in Fiber Bragg Grating Sensors.
*Journal of Sensors***2016**,*2016*, 1-8, 10.1155/2016/1284520. - K.P. Koo; M. Leblanc; T.E. Tsai; S.T. Vohra; Fiber-chirped grating Fabry-Perot sensor with multiple-wavelength-addressable free-spectral ranges.
*IEEE Photonics Technology Letters***1998**,*10*, 1006-1008, 10.1109/68.681299. - Zou Wei; H. Ghafouri-Shiraz; Hossam M. H. Shalaby; New code families for fiber-Bragg-grating-based spectral-amplitude-coding optical CDMA systems.
*IEEE Photonics Technology Letters***2001**,*13*, 890-892, 10.1109/68.935838. - Kataoka, Nobuyuki; Wada, Naoya; Terada, Yoshihiro; Sakamoto, Akira; Nishiwaki, Kenji; Nishide, Kenji; Phase-shifted superstructured fiber Bragg grating .
*Fujikura Technical Review***2011**,*40*, 6 - 11. - C. A. Triana; D. Pastor; M. Varon; Optical code division multiplexing in the design of encoded fiber Bragg grating sensors.
*Optica Pura y Aplicada***2016**,*49*, 17-28, 10.7149/opa.49.1.17. - A. Triana; D. Pastor; Interrogation of super-structured FBG sensors based on discrete prolate spheroidal sequences.
*Optical Sensors 2017***2017**,*10231*, 102310, 10.1117/12.2267238. - Ivan B. Djordjevic; Alaa H. Saleh; Franko Kueppers; Design of DPSS based fiber bragg gratings and their application in all-optical encryption, OCDMA, optical steganography, and orthogonal-division multiplexing..
*Optics Express***2014**,*22*, 10882-10897, 10.1364/oe.22.010882. - Youngbok Kim; Sie-Wook Jeon; Won-Bae Kwon; Chang-Soo Park; A Wide Dynamics and Fast Scan Interrogating Method for a Fiber Bragg Grating Sensor Network Implemented Using Code Division Multiple Access.
*Sensors***2012**,*12*, 5888-5895, 10.3390/s120505888. - Andrés Triana; Daniel Pastor; Margarita Varón; A Code Division Design Strategy for Multiplexing Fiber Bragg Grating Sensing Networks.
*Sensors***2017**,*17*, 2508, 10.3390/s17112508. - Sakhabutdinov A.J. Microwave-Photonic Sensor Systems Based on Address Fiber Bragg Structures and their Application for Solving Practical Problems. D.Sc. Thesis. Kazan: Kazan National Research Technical University named after A.N. Tupolev-KAI Publ., 2018. (in Russian)
- O.G. Morozov; A. Zh. Sakhabutdinov; Addressed fiber Bragg structures in quasi-distributed microwave-photonic sensor systems.
*Computer Optics***2019**,*43*, 535-543, 10.18287/2412-6179-2019-43-4-535-543. - O G Morozov; A Zh Sakhabutdinov; I I Nureev; R Sh Misbakhov; Modelling and record technologies of address fibre Bragg structures based on two identical ultra-narrow gratings with different central wavelengths.
*Journal of Physics: Conference Series***2019**,*1368*, 022049, 10.1088/1742-6596/1368/2/022049. - O G Morozov; Airat Zhavdatovich Sakhabutdinov; I I Nureev; R Sh Misbakhov; Modelling and record technologies of address fiber Bragg structures based on gratings with two symmetrical pi-phase shifts.
*Journal of Physics: Conference Series***2019**,*1368*, 022048, 10.1088/1742-6596/1368/2/022048. - Novikova V.A., Konnov K.A., Gribaev A.I., Vargel S.V. The Method of Forming a Fiber Bragg Grating with a Phase Shift. Patent RF, no. 2676191, 24.01.2018 (in Russ.)
- Kenneth Levenberg; A method for the solution of certain non-linear problems in least squares.
*Quarterly of Applied Mathematics***1944**,*2*, 164-168, 10.1090/qam/10666. - Donald W. Marquardt; An Algorithm for Least-Squares Estimation of Nonlinear Parameters.
*Journal of the Society for Industrial and Applied Mathematics***1963**,*11*, 431-441, 10.1137/0111030. - Tjalling J. Ypma; Historical Development of the Newton–Raphson Method.
*SIAM Review***1995**,*37*, 531-551, 10.1137/1037125.

More

Information

Subjects:
Engineering, Electrical & Electronic

Contributors
MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register
:

View Times:
718

Update Date:
29 Oct 2020