Mineralogy of Antimony Ores and Antimony Production: Comparison
View Latest Version
Please note this is a comparison between Version 4 by Conner Chen and Version 5 by Conner Chen.

Antimony is a metalloid element having common oxidation states of 5+ and 3+. It is a lustrous silvery-white solid, which is quite brittle and exhibits a flaky texture.  Antimony is classified as a critical/strategic metal. SItibnite, jamesonite, and antimony-gold ores are the most common sources of antimonys primary production is predominated by China.

  • antimony
  • critical metals
  • extractive metallurgy

1. Introduction

Antimony is one of the medieval metals, and antimony-containing castings were found from 4000 BC in China. Metallic antimony was mistaken for stibnite until the early 17th century (1604) when Basilius Valentinus published a book titled “The Triumphal Chariot of Antimony” explaining antimony properties, applications, and winning methods. This is renowned as the beginning of human knowledge about antimony. Later in 1707, the French chemist Lémery published his “Traité de l’Antimoine”, which led to considerable acclaim for antimony.
The English word “antimony” is derived from the Greek words: anti [opposed] and monos [solitude], which means a metal that rarely occurs alone [1]. Native antimony has a strong affinity for sulfur and other metals such as copper, lead, and gold [2][3]. As a result, the development of extraction methods was very slow until the Japanese war in 1905. Its ability as an alloying element for lead, which could be used in the production of ammunitions that can penetrate armor plates, resulted in its wide usage during World Wars I and II, at which time China was the major producer by 30,000 to 40,000 tons of antimony per year [1]. Antimony use in military applications led to its classification as an important member of the “Strategic Metals” [4].
Antimony is a metalloid element having common oxidation states of 5+ and 3+. It is a lustrous silvery-white solid, which is quite brittle and exhibits a flaky texture. Natural antimony consists of a mixture of two stable isotopes that have atomic weights of 121 (57.25 wt%) and 123 (42.75 wt%); more than thirty radioactive isotopes of antimony are also known [3]. Table 1 summarizes the important physicochemical and mechanical properties of antimony.
Table 1. Physicochemical and mechanical properties of antimony.
Properties/Characteristics Value Unit
As
Atomic number 51 N/A
Atomic weight 121.76 u
Melting point 630.5 °C
Boiling point (at 101.3 kPa) 1325
.
Antimony trioxide (ATO or antimony white) is now the most important antimony compound. Commercial grade is typically a fine and white powder, containing between 99.2% and 99.5% Sb2O3 and varying levels of other impurities (such as arsenic, lead, and iron) depending on the targeted application [4]. International Antimony Association provides the specifications required for the antimony trioxide products [8], provided in Table 2.
Table 2. Specifications of antimony trioxide products (adapted [8][9]).
Physical Form Powder
Particle size (µm) 0.2–44
Constituents Low PbO Medium PbO High PbO
Sb2O3 (wt%) >98 >97.1 and ≤99.6 >97 and ≤99.6
PbO (wt%) <0.25 >0.25 and <0.3 ≥0.3 and <2.5
2O3 (wt%) <0.1 <0.1 <0.1
Other impurities (wt%) <1.75 ≤2.6 ≤0.4
ATO is mainly used in flame-retardants, in conjunction with halogens for sealants, plastics, paints, rubber, fiberglass, aircraft, and automotive seat covers, children’s clothing, textile goods, and electronic equipment [6]. Antimony trioxide is also used as a catalyst for polyethylene terephthalate (PET) production, polyester resins, phosphorescent agent in fluorescent light bulbs, and as an opacifier for porcelain [10].
Antimony pentoxide (Sb2O5) and sodium antimonate (NaSb(OH)6) are also used in flame retardants. Another application for sodium antimonate is in decolorizing and refining agents for optical and cathode ray tube glasses. Antimony trisulfide (Sb2S3) is used in the liners of automobile brakes and safety match compositions. Antimony pentasulfide (Sb2S5) is used as a vulcanizing agent in the production of red rubber [11][12]. The intermetallic compounds AsSb, GaSb, and InSb have found some applications in electronics as semiconductors [5][13][14].

3. Mineralogy of Antimony Ores

Antimony is not an abundant element, averaging ~0.2 g/tonne in the earth’s crust, but it can be found in more than 100 different minerals [15]. Anderson [4] and Habashi [16] have provided detailed information on the occurrence, geology, and mineralogy of the antimony ores. Therefore, only antimony-containing minerals that are of higher industrial significance are listed in Table 3. These minerals have been categorized into three major groups, sulfides, oxides, and mixed minerals.
Table 3. Minerals of antimony with industrial significance.
Mineral Chemical Formula Sb (wt%)
. Antimony-gold ores mostly consist of gold and antimony sulfide intergrowth and aurostibite (AuSb2) [18]. Russia, Bolivia, Australia, and China have gold-antimony ore deposits [19]. Copper-rich sulfidic ores (e.g., tetrahedrite) have also received significant attention in recent years due to the depletion of richer ore bodies.
The most significant antimony-containing components that are present in different ore bodies, and intermediate or final products of the antimony production are listed in Table 4.
Table 4. Major antimony-containing compounds.
Element/

Compound		 Sb Sb2S3 Sb2O3 Sb2S5 Sb2O5 Sb2O4
.
In addition to Europe and USA, Canada, Japan, and Australia also called antimony a critical metal due to its importance for transition to green energies (e.g., solar panels, windmills, and batteries), and the advance of the semiconductor industry and electronics [22][23][24].
Table 5. Main producers of antimony in the world.
Country Mine

Product. (t) [21]		 Reserves (×1000 t) [21] Main Producers [4] Product [4] Total Production Capacity (×1000 t/y Sb) [4]
Sulfides Stibnite Sb2S
  • Antimony trisulfide (Rhombic)
3
  • Antimony Glance
71.7
  • Stibnite (mineral)
  • Crudum (in molten form)
  • Needle Antimony (crystals after liquation)
  • Antimony Grey
  • Antimony trioxide (ATO)
  • Valentinite (Cubic structure, chain allotrope mineral, stable <570 °C)
  • Senarmontite (Rhombic, cage allotrope mineral, stable >570 °C)
  • Antimony white (powder product)
  • Antimony pentasulfide
  • Golden Antimony
  • Antimony pentoxide
USA NA 60 Amspec Chemical Corporation

Laurel Industries Inc.

Great Lakes Chemical (Anzon)

United States Antimony Corporation



Sunshine Mining and Refining		 Trioxide

Trioxide

Trioxide

Metal, Trioxide, Na-antimonate

Metal, Na-antimonate		 15

12.5

6

1.5



1.5
Tetrahedrite Cu6Sb2S6 29.8
Jamesonite Pb
Senarmontite (cubic)
Sb2O3 83.5
Valentinite (rhombohedral) Sb2O3 83.5
Cervantite (orthorhombic)
Name(s)
  • Antimony (Stibium)
  • Regulus (in product form)
  • Antimony Black (finely ground metal)
  • Antimony tetroxide
  • Carvantite (mineral)
Melting point 630 °C 546–548 °C 656 °C 120–170 °C (decomposes to Sb2S3 and S) 380 °C (decomposes) 930 °C

(decomposes to ATO and oxygen)
4FeSb6S
Boiling point14 1635 °C35.4 1000–1150 °C 1425 °C (sublimes) °C
N/A N/A N/A Zinckenite PbSb2S4 42.1 Density (at 20 °C) 6.688 g/cm3

4. Antimony Production

In the ’70s and ’80s, Canada, Malaysia, Thailand, Japan, Italy, Spain, former Yugoslavia, and Czechoslovakia were among the main producers of antimony, but their production was ceased completely or reduced significantly. Canada, for example, was used to produce ~3000 tonnes/year of antimony in the late ’70s, mainly using ores extracted from Consolidated Durham Mines and Resources Ltd., in New Brunswick, Canada. However, the mine operation was stopped in 1981. Teck’s lead-smelter in Trail, British Columbia, was also used to produce antimony as a by-product, in small quantities [2], but the antimony metal is no longer among product lists of the operation [20].
According to U.S. Geological Survey 2022, almost 90% of the antimony mine production currently comes from three countries of China, Russia, and Tajikistan. The remaining 10% comes from other countries [21], shown in Table 5.
Secondary production accounts for ~20% of the total antimony production, and mainly originates from the recycling of lead-acid batteries and antimony-containing residues from lead-, copper- and gold-smelting processes [4].
China dominates mining of the raw materials and production of major antimony-bearing products (trioxide and metal). Antimony production in China is mainly concentrated in Hunan, Guangxi, Guizhou, Yunnan, and Gansu provinces [19]. China strictly controls the export rates and can put pressure on the market, which has led to an uncertain situation regarding the antimony price and availability for the demand of the western countries. Binz and Friedrich [9] highlighted that this has been the main reason why the European Commission considered high supply risk and economic importance for antimony and listed it as one of the critical raw materials for the period 2015–2020. To manage the risk of dependence on foreign sources of antimony, the USA Government has stockpiled antimony for national defence purposes for several decades [3]
Australia 3400 100      
Bolivia 2700 310 Enal Trioxide 9.3
Burma 2000 140      
Oxides
Canada 2 78       Tensile strength 10.8 N/mm2
China 60,000 480 Hsikwangshan Mining Administration



Dachang Mining Administration

Guzhou Dushan Dongfeng

Hubei Chongyang

Hunan Chenzhou Mining Co, Ltd.,

Guangxi China Tin Group Limited

Yunnan Muli antimony industry Co., Ltd.

Xikuangshan Flash-Antimony Industry Limited		 Metal, Oxides, Na-antimonate

Metal

Metal, Trioxide

Metal, Trioxide

N/A

N/A

N/A



Metal [25]		 30

N/A

10

4

4

N/A

N/A

N/A



40		 Mohs hardness 3.0-3.5 N/A
Sb2O4/Sb2O3⋅Sb2O5 79.2
Guatemala 80 NA     Modulus of elasticity 566
Stibiconite (antimony hydroxides) Sb2ON/mm2
  4⋅H2O 74.8
Iran 400 NA    Surface tension of solid (at 432 °C) 317.2 mN/m
  Mixed Kermesite 2Sb2S3
Kazakhstan⋅Sb2 100O NA       Surface tension of liquid (at 1200 °C) 255 mN/m
Kyrgyzstan NA 260 Kadamjaisk Antimony Combine Metal, Trioxide 20 Crystal structure Rhombohedral N/A
Lattice constant
Mexico 700 18       a = 0.437, c = 1.1273
Pakistannm
20 26     Latent heat of fusion 10.49 kJ/mol
 
Russia (Recoverable) 25,000 350       Latent heat of evaporation 195.10 kJ/mol
Tajikistan 13,000 50 Coefficient of linear expansion (at 20 °C) 8-11 µm/m-°C
     
Turkey 1300 100       Electrical resistivity (at 0 °C) 37 µΩ.cm
Vietnam 400 NA       Molar heat capacity of solid (at 630.5 °C) 30.446 J/mol-K
France NA   Société Industrielle et Chimique de L’Aisne

Mines de la Lucette

AMG antimony [26]		 Metal, Trioxide



Metal

Trioxide		 12



9.5

10		 Molar heat capacity of liquid (at 630.5 °C) 31.401 J/mol-K
Thermal conductivity (at 0 °C) 25.9 W/m-K

2. Applications

Metallic antimony is brittle and has limited workability, but when alloyed in small amounts with other metals, it typically increases the hardness, resistance to wear, and improves castability. Historical applications of antimony included medicine and cosmetics (in powder form), battery grids, anti-friction bearing metals based on lead and tin, sheets and pipes [2], and type metals (60% Pb, ~25% Sb, and ~15% Sn), which is no longer the case because of off-set printing processes [5].
In World War II, antimony trichloride (SbCl3) was widely used in tents and vehicle covers. In a fire, antimony and chlorine recombine to form unstable compounds that consume oxygen in the environment, leading to the flame suffocation. Later, antimony was significantly used in lead-acid batteries in automobiles to harden the lead from which the electrodes (grids) are made of. The hard lead contains 15–25% antimony [4]. Lead-antimony alloys are used in starting-lighting-ignition batteries, ammunition, corrosion-resistant pumps and pipes, tank linings, and antifriction bearings [6]. High-purity antimony is used in semi-conductors, infrared detectors, and diodes. Antimony is also used in nuclear reactors together with beryllium [7] and pharmaceutical industry. Organic antimony compounds, such as antiprotozoal drugs, are used for certain parasitic diseases [6]
3
83.5
Stibnite, jamesonite, and antimony-gold ores are the most common sources of antimony. The two formers are typically found with lead ores in nature [17]
Belgium
NA
 
Campine


Union Minière/Umicore
[
5
]
Trioxide


Na-antimonate
10

6
Oman     Strategic and Precious Metals Processing (SPMP) Metal, Trioxide 20 [27]
World Total (Rounded) 110,000 >2000      
It has been projected that extractable global resources of antimony will be exhausted by 2050, assuming an increase in the extraction rate by 3% per year [10][28]. Therefore, significant research effort has been devoted to developing methods for recovery of antimony from secondary raw materials [13][29], but these contents only focuses on primary pyrometallurgical production routes.
Generally, the production of antimony can be via pyro- or hydro-metallurgical processes. More recently, bio-hydrometallurgical processes have also been proposed, but still at lab-scale [30][31]. Similar to lead, copper, and tin production, antimony is mainly extracted by pyrometallurgical methods. Hydrometallurgical routes, which are typically used for low-grade ores (<5% Sb) [32][33] and to minimize losses of precious metals (PMs), can be classified into two groups of alkaline leaching and acid leaching, followed by the electrodeposition of metallic antimony at the cathode or hydrolysis with NaOH or NaH4OH to produce Sb2O3 [32][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48]. An example is a process used at Sunshine Mining Co (between Kellogg and Wallace, ID, USA) [49]. Furthermore, the production of antimony based on electrolysis of Sb2S3 [50] have been recently developed in a lab scale to mitigate SO2 pollution and CO2 emissions. More specifically, molten salt electrolysis of antimony smelting is a new development in the direction of antimony clean production [51][52].

References

  1. Stanley, G. Metals and metallurgy in the twentieth century. J. S. Afr. Inst. Min. Metall. 1946, 46, 235–267.
  2. Tian-Cong, Z. The Metallurgy of Antimony; Central South University of Technology Press: Changsha, China, 1988; p. 731.
  3. United States Geological Survey. Publications of the U.S. Geological Survey, 2000; United States Geological Survey: Washington, DC, USA, 2001.
  4. Anderson, C. Antimony production and commodities. SME Mineral Processing & Extractive Metallurgy Handbook; Society for Mining, Metallurgy, and Exploration: Englewood, CO, USA, 2019.
  5. Umicore Antimony. Available online: https://www.umicore.com/en/about/our-metals/antimony/ (accessed on 30 April 2022).
  6. Umicore Antimony. Available online: https://www.usantimony.com/ (accessed on 3 May 2022).
  7. Keny, S.J.; Gokhale, B.K.; Kumbhar, A.G.; Bera, S.; Velmurugan, S.; Basu, S.; Suvarna, S.; Kiran, K. Antimony (Sb) Sorption at High Temperature and Pressure on Zircaloy, Carbon Steel (CS) and Magnetite Coated CS (MCS) Surfaces; Bhabha Atomic Research Centre Facilities: Kalpakkam, India, 2015.
  8. Antimony Substances. Available online: https://www.antimony.com/antimony/ (accessed on 30 April 2022).
  9. Binz, F.; Friedrich, B. Recovery of antimony trioxide flame retardants from lead refining residues by slag conditioning and fuming. Chem. Ing. Tech. 2015, 87, 1569–1579.
  10. Henckens, M.L.C.M.; Driessen, P.P.J.; Worrell, E. How can we adapt to geological scarcity of antimony? Investigation of antimony’s substitutability and of other measures to achieve a sustainable use. Resour. Conserv. Recycl. 2016, 108, 54–62.
  11. Claude, F. Non-ferrous metal: From Ag to Zn. Lannoo. Tielt 2002.
  12. Schmidt, M.L.M.; Domer, U. Rohstoffrisikobewertung—Antimon; Deutsche Rohstoffagentur (DERA) in der Bundesanstalt für Geowissenschaften und Rohstoffe (BGR): Berlin, Germany, 2015.
  13. Dupont, D.; Arnout, S.; Jones, P.T.; Binnemans, K. Antimony Recovery from End-of-Life Products and Industrial Process Residues: A Critical Review. J. Sustain. Metall. 2016, 2, 79–103.
  14. Multani, R.S.; Feldmann, T.; Demopoulos, G.P. Antimony in the metallurgical industry: A review of its chemistry and environmental stabilization options. Hydrometallurgy 2016, 164, 141–153.
  15. Schulz, K.J.; DeYoung, J.H., Jr.; Seal Ii, R.R.; Bradley, D.C. Critical Mineral Resources of the United States—An Introduction; 1802A; U.S. Geological Survey: Reston, VA, USA, 2017; p. 22.
  16. Habashi, F. Antimony. Handbook of Extractive Metallurgy; Habashi, F., Ed.; Wiley-VCH: Weinheim, Germany, 1997; Volume 2, pp. 822–844.
  17. Štrbac, N.; Mihajlović, I.; Minić, D.; Živković, Ž. Characterization of the natural mineral form from the PbS-Sb2S3 system. J. Min. Metall. B Metall. 2010, 46, 75–86.
  18. Kovalev, K.R.; Kalinin, Y.A.; Naumov, E.A.; Myagkaya, M.K. Relationship of antimony with gold mineralization in the ore districts of Eastern Kazakhstan. Russ. Geol. Geophys. 2014, 55, 1170–1182.
  19. Liu, W.-F.; Yang, T.-Z.; Chen, L.; Bin, S.; Bin, W.-D. Development of Antimony Smelting Technology in China. In 4th International Symposium on High-Temperature Metallurgical Processing; Springer: Berlin/Heidelberg, Germany, 2013; pp. 341–351.
  20. Other Metals. Available online: https://www.teck.com/products/other-metals/ (accessed on 30 April 2022).
  21. Mineral Commodity Summaries 2022; U.S. Geological Survey: Reston, VA, USA, 2022; p. 202.
  22. Englman, T.; Terkieltaub, E.; Etgar, L. High Open Circuit Voltage in Sb2S3/Metal Oxide-Based Solar Cells. J. Phys. Chem. C 2015, 119, 12904–12909.
  23. Itzhaik, Y.; Bendikov, T.; Hines, D.; Kamat, P.V.; Cohen, H.; Hodes, G. Band Diagram and Effects of the KSCN Treatment in TiO2/Sb2S3/CuSCN ETA Cells. J. Phys. Chem. C 2016, 120, 31–41.
  24. Perpetua Resources Could Help Secure U.S. Production of Critical Mineral Antimony. Available online: https://perpetuaresources.com/news/american-antimony-production/ (accessed on 30 April 2022).
  25. Guo, X.; Wang, K.; He, M.; Liu, Z.; Yang, H.; Li, S. Antimony smelting process generating solid wastes and dust: Characterization and leaching behaviors. J. Environ. Sci. 2014, 26, 1549–1556.
  26. Antimony Trioxide. Available online: https://www.sica-chauny.com/en/products/antimony (accessed on 3 May 2022).
  27. SPMP. Available online: https://www.spmp.co.om/who-we-are (accessed on 3 May 2022).
  28. Henckens, M.L.C.M.; Driessen, P.P.J.; Worrell, E. Metal scarcity and sustainability, analyzing the necessity to reduce the extraction of scarce metals. Resour. Conserv. Recycl. 2014, 93, 1–8.
  29. Juan Cancio, J.-L.; Ricardo Gerardo, S.-A.; Alejandro, C.-R.; José Antonio, R.-S.; Aurelio, H.-R.; Jorge Enrique, R.-S. Antimony recovery from recycled terminals of lead-acid batteries with Na2CO3 and SiC after the formation of Sb2O3. J. Min. Metall. Sect. B Metall. 2022, 58, 97–108.
  30. Ubaldini, S.; Veglio, F.; Toro, L.; Abbruzzese, C. Combined bio-hydrometallurgical process for gold recovery from refractory stibnite. Miner. Eng. 2000, 13, 1641–1646.
  31. de Carvalho, L.C.; da Silva, S.R.; Giardini, R.M.N.; de Souza, L.F.C.; Leão, V.A. Bio-oxidation of refractory gold ores containing stibnite and gudmundite. Environ. Technol. Innov. 2019, 15, 100390.
  32. Dembele, S.; Akcil, A.; Panda, S. Technological trends, emerging applications and metallurgical strategies in antimony recovery from stibnite. Miner. Eng. 2022, 175, 107304.
  33. Panda, S.; Sarangi, C.K.; Pradhan, N.; Subbaiah, T.; Sukla, L.B.; Mishra, B.K.; Bhatoa, G.L.; Prasad, M.; Ray, S.K. Bio-hydrometallurgical processing of low grade chalcopyrite for the recovery of copper metal. Korean J. Chem. Eng. 2012, 29, 781–785.
  34. Akcil, A.; Vegliò, F.; Ferella, F.; Okudan, M.D.; Tuncuk, A. A review of metal recovery from spent petroleum catalysts and ash. Waste Manag. 2015, 45, 420–433.
  35. Anderson, C. Hydrometallurgically treating antimony-bearing industrial wastes. JoM 2001, 53, 18–20.
  36. Anderson, C.; Twidwell, L. The alkaline sulfide hydrometallurgical separation, recovery and fixation of tin, arsenic, antimony, mercury and gold. Lead Zinc 2008, 2008, 121–132.
  37. Awe, S.A.; Sundkvist, J.-E.; Bolin, N.-J.; Sandström, Å. Process flowsheet development for recovering antimony from Sb-bearing copper concentrates. Miner. Eng. 2013, 49, 45–53.
  38. Baláž, P.; Briančin, J.; Šepelák, V.; Havlik, T.; Škrobian, M. Non-oxidative leaching of mechanically activated stibnite. Hydrometallurgy 1992, 31, 201–212.
  39. Garboś, S.; Bulska, E.; Hulanicki, A.; Fijałek, Z.; Sołtyk, K. Determination of total antimony and antimony(V) by inductively coupled plasma mass spectrometry after selective separation of antimony(III) by solvent extraction with N-benzoyl-N-phenylhydroxylamine. Spectrochim. Acta Part B At. Spectrosc. 2000, 55, 795–802.
  40. Kyle, J.H.; Breuer, P.L.; Bunney, K.G.; Pleysier, R.; May, P.M. Review of trace toxic elements (Pb, Cd, Hg, As, Sb, Bi, Se, Te) and their deportment in gold processing. Part 1: Mineralogy, aqueous chemistry and toxicity. Hydrometallurgy 2011, 107, 91–100.
  41. Lin, H.K. Extraction of antimony by a copper chloride extractant. Hydrometallurgy 2004, 73, 283–291.
  42. Nordwick, S.; Anderson, C. Advances in antimony electrowinning at the Sunshine mine. In Proceedings of the Fourth International Symposium on Hydrometallurgy Fundamentals, Technology and Innovations, Salt Lake City, UT, USA, 13 August 1993; pp. 1107–1128.
  43. Solozhenkin, P.M.; Alekseev, A.N. Innovative processing and hydrometallurgical treatment methods for complex antimony ores and concentrates. Part I. J. Min. Sci. 2010, 46, 203–209.
  44. Solozhenkin, P.M.; Alekseev, A.N. Innovative Processing and Hydrometallurgical Treatment Methods for Complex Antimony Ores and Concentrates. Part II: Hydrometallurgy of Complex Antimony Ores. J. Min. Sci. 2010, 46, 446–452.
  45. Thibault, J.D.; MacDonald, M.D.; Stevens, D.A. Process for producing antimony trioxide. US Patent Patent no. 5,783,166, 1998.
  46. Vigdorovitch, V.N.; Ivleva, V.S.; Krol, L.I. Purification of antimony by zone recrystallization. Izvestia Akademii Nauk SSSR Metally Topi. 1960, 44, 29–35.
  47. Xu, Y.; Feng, P.; Yu, X.; Li, Y.; Yu, S.; Xie, G. Study on the Separation of Antimony by Hydrometallurgy with Typical Material Containing Sb. Multipurp. Util. Miner. Resour. 2017, 6, 31–35.
  48. Yang, J.-G.; Wu, Y.-T. A hydrometallurgical process for the separation and recovery of antimony. Hydrometallurgy 2014, 143, 68–74.
  49. Anderson, C.; Nordwick, S.; Krys, L. Processing of antimony at the Sunshine mine. Residues Effl. Process. Environ. Consid. 1992, 349–366.
  50. Wang, Z.; Ru, J.; Bu, J.; Hua, Y.; Zhang, Y.; Xu, C. Direct Electrochemical Desulfurization of Solid Sb2S3 to Antimony Powders in Deep Eutectic Solvent. J. Electrochem. Soc. 2019, 166, D747–D754.
  51. Zhu, Q.; Yang, J.; Tang, C.; Nan, T.; Ding, R.; Liu, J. Electroreduction of Antimony Sulfide Enhanced by Nitrogen Bottom Blowing in Molten NaCl-KCl-Na2S. JOM 2022, 74, 1889–1899.
  52. Yin, H.; Chung, B.; Sadoway, D.R. Electrolysis of a molten semiconductor. Nat. Commun. 2016, 7, 12584.
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/)
Video Production Service
Feedback