The rapidly increasing concerns regarding exhaustion of fossil fuel and environmental deterioration have gathered global awareness for renewable energy production to develop sustainable society. Recently, various electrochemical technologies are being adopted to execute the reduction of climate change, and environmental pollution. For example, fuel cells (FC), metal-air batteries (MABs), water electrolyzers, etc., have been regarded as dependable as well as clean, eco-friendly, and affordable energy storage/conversion devices ^[1]. The performance and efficiency of many energy conversions and storage systems are mainly governed by oxygen reduction reaction (ORR) which was firstly reported by Jasinski in 1964 using co-phthalocyanine as a precursor ^[2]. However, the ORR process is kinetically sluggish requiring high overpotential and hence, robust electrocatalysts are often required to trigger the ORR process. Until now, Pt-based materials are considered as the benchmark electrocatalysts for ORR in terms of achieving high positive onset potential, half-wave potential, and high limiting current density. Nonetheless, high cost, scarcity, and poor durability are the main constraints from make them industrially viable.

Recently, the main aim of the researchers is to substitute Pt-based materials with cost-effective, efficient, and stable non-precious metal-based/metal-free materials. To achieve this goal, a library of platinum group metal (PGM) free electrocatalysts have been developed which can be divided into two branches: non-precious transition metal-based electrocatalysts including metal-coordinated nitrogen-doped carbon (M−N−C) ^[3][4][5], transition metal-based oxides ^[6], transition metal nitrides ^[7], phosphides ^[8], perovskites ^[9], transition metal chalcogenides ^[10], and heteroatom or multi atom doped carbon-based materials ^[11]. Although many electrocatalysts showed promising electrocatalytic activity toward ORR rivaling state-of-the-art Pt/C but there is plenty of room to improve the stability of these transition metal-based electrocatalysts to be considered for commercial uses.

Metal-free carbon-based materials have become a promising alternative to transition metals due to their organized electrical conductivity, durability, stability, tunable surface morphology, and adjustable (micro, meso, macro) porous structure. Moreover, the doping of heteroatom (N, P, S, B, etc.) in the sp² carbon template can alter the electronic distribution over carbon owing to the generated electronegativity difference ^[3]. As a consequence, this will help to facilitate oxygen adsorption as well as the breaking of O-O bond rather than pristine carbon. It is important to mention that the advent of carbon nanotubes (CNTs) and graphene have profoundly encouraged the development of carbon-based electrodes for ORR. In spite of the promising performance of CNT or graphene-based materials in ORR, their utilization on a large scale is hindered by the high synthetic costs. Hence, highly earth-abundant biomass resources have garnered attention as sustainable and alternative option to design carbon-based materials for green energy storage devices due to their low cost, and inherent presence of heteroatoms.

The main resources of biomass are carbohydrates, polysaccharides, lignocellulose biomass, animal-based biomass, human waste-based biomass, etc. which are globally produced as waste in tons every single day ^[12]. These wastes pose a great challenge to waste management and this can be regarded as a potential option to convert the waste to novel carbon-based materials for versatile electrochemical applications. Indeed, the conversion of biomass to electrode materials for energy and environmental applications gained huge attention and has been highlighted recently ^[13][14][15]. Cellulose, hemicellulose, and lignin’s are the primary configurational components of biomass ^[12].

2. Fundamentals of ORR

ORR has been the subject of huge investigation over the decades (Figure 1a) since it is at the heart of various energy conversion and storage systems such as fuel cells, metal-air batteries, and so on ^[16][17]. Among all the studied catalysts, Pt is the state-of-the-art catalyst for ORR due to its moderate affinity to the reactive intermediate species formed on the surface of an electrode during the course of the reaction. Moreover, Pt possesses the highest electrochemical activity towards ORR owing to its appropriate d–band vacancy (0.6 per atom), and reasonable oxygen adsorption capability ^[18]. Until now, various mechanism for ORR has been put forward, however; it can follow either dissociative or associative one (Figure 1b). The mechanistic pathway is governed not only by the oxygen adsorption mode, but it also depends on the dissociation barrier of the catalyst surface ^[19]. The adsorption of O₂ over the active site of the catalyst is mainly of two types: bidentate O₂ adsorption (Yeager model) and end-on or monodentate O₂ adsorption (Figure 2) ^[20]. The first one leads to the direct four-electron pathway resulting in H₂O as the product whereas the second one follows a two-electron pathway with peroxide formation, respectively ^[21][22]. Figure 2. The schematic illustration of various modes of O₂ adsorption on catalyst surfaces: (a) on top end-on; (b) bridge end-on; (c) bridge side-on one site; and d, bridge side-on two sites, adapted from ^[23]. It is noteworthy to mention that for practical applications like fuel cells, metal-air batteries, etc., the four-electron pathway is a more desired one since the formation of peroxide species can be avoided which caters to the degradation of the catalyst. The formation of highly reactive oxygen intermediates in ORR such as OOH*, OH*, O* (* denotes a site on the catalyst surface) is associated with the involvement of a complicated multi-step electron transfer process. The electrocatalytic activity is largely determined by the binding energies of the reactive oxygen species to the catalyst surface. Hence, to design highly active materials it is a prerequisite to have knowledge of how to control the binding energies of reactive intermediates on a catalyst surface. On the basis of density functional theory calculations, Nørskov and his group have calculated the free energies of the surface intermediates for a series of metals ^[19]. This group has also established a trend in thermodynamic limitations for the metals and constructed a volcano-shaped plot that relates the theoretical ORR activity and oxygen adsorption energy. The model indicates that Pt sits near the top and explains why Pt is regarded as the best cathode material. However, it is important to note that Pt is not situated at the “summit of the volcano” (Figure 3) and hence alloying with 3d transition metals can be used to improve its performance ^[24].

2.1. Basic Parameters to Evaluate ORR Catalysts

After Levich’s seminal discovery of the rotating disk electrode (RDE) in 1944, it is widely used to study the ORR kinetics from the polarization curve ^[26]. The polarization curve is generally divided into three well-defined regions namely kinetic, mixed (kinetic + diffusion), and diffusion-limited zone and in each part, the ORR kinetics are controlled in different ways. Apart from that, some widely accepted parameters such as the onset potential (E_onset), half-wave potential (E_1/2), and diffusion-limited current density (J_L) can be deduced from the polarization curve for apprising the electrochemical activity of the investigated electrocatalyst. These parameters will be defined later but it is necessary to highlight that the more positive the E_onset, E_1/2, and high J_L values, the more active the electrocatalyst for ORR. In the kinetic-controlled area, the ORR reaction is sluggish, and the current density increases to some extent as the potential decreases (Figure 4). In a mixed (kinetic and diffusion-controlled zone) region, the reaction accelerates as the potential drops and a remarkable increase in the current density can be observed. In this particular region, the current density is inversely proportional to the applied potential. In the diffusion-controlled zone (plateau region of the curve), the current density can be precisely determined by convection, and it reaches a platform at a certain rotating speed.

2.1.1. Onset Potential and Half-Wave Potential

The definitions of the E_onset vary a lot in literature and the experimental determination is also quite arbitrary. However, onset potential usually refers to the potential when the current diverges from the baseline and the most common approach is to find the intersection of the tangents between the baseline and the increasing current in the polarization curve (Figure 4Figure S3). Apart from that, the potential corresponding to 5% of the J_L and the potential at which the ORR current density does not exceed a value of 0.1 mA cm⁻² were also proposed to define the onset potential ^[27]. E_1/2 is another basic parameter, and it is directly calculated from the midpoint of obtained LSV curve at 1600 rpm. It is basically the potential corresponding to half of the diffusion limiting current density.

2.1.2. Kinetic Current Density

Kinetic current density (J_k) is one of the important parameters to determine the catalytic activity of an ORR catalyst. Mass transport corrected polarization curve predicts the value of J_k and can be obtained with the help of Koutecky-Levich (K-L) equation: To minimize the error in mass transport correction, different catalysts are compared with respect to kinetic current density at a higher potential region.

2.1.3. Electron Transfer Number and HO₂⁻ Percentage

The number of electron transfer (n) and the percentage of HO₂⁻ intermediate are also basic parameters to understand ORR kinetics. These parameters can be determined from RDE or RRDE (rotating ring disk electrode) techniques which are effective for investigating the kinetics of multistep charge transfer reactions. K-L equation is generally utilized to calculate the “n” value and obtained by plotting (1/J_L) against the square root of rotation rate (ω^−1/2), which is widely known as the K-L plot. For where where, ω is the electrode rotating rate (rad s⁻¹), n is the number of electrons, F is the Faraday constant (F = 96485 C mol⁻¹), C₀ (C₀ = 1.2 × 10⁻⁶ mol cm⁻³) and D₀ (D₀ = 1.9 × 10⁻⁵ cm² s⁻¹) denotes the concentration and diffusion coefficients of O₂ in 0.1 M KOH, respectively, υ is the kinematic viscosity of the electrolyte (0.01 cm² s⁻¹), and k is the electron transfer rate constant ^[28]. The “n” value can also be calculated from the RRDE technique by using the following equation: where J_D is the disc current density, J_R is the ring current density, and N is the RRDE collection efficiency, n is the number of electron transfers during the reaction. The percentage of intermediate species for ORR is calculated by the equation given below: