Biodegradable Film Materials for Packaging: Comparison
View Latest Version
Please note this is a comparison between Version 2 by Vivi Li and Version 1 by Hongge Guo.

当今世界，In today’s world, the problem of “白色污染”问题越来越严重，许多国家都特别关注这个问题，减少聚合物废物和保护环境已成为最重要的任务之一。由于可生物降解包装膜材料的降解性、安全性、经济性和实用性，生物降解包装膜材料已成为包装行业取代传统包装膜材料的主要趋势，前提是满足包装性能要求。white pollution” is becoming more and more serious, and many countries have paid special attention to this problem, and it has become one of the most important tasks to reduce polymer waste and to protect the environment. Due to the degradability, safety, economy and practicality of biodegradable packaging film materials, biodegradable packaging film materials have become a major trend in the packaging industry to replace traditional packaging film materials, provided that the packaging performance requirements are met. Degraded plastics are plastics that have been subjected to defined environmental conditions for a period of time and contain one or more steps that result in significant changes in the chemical structure of the material resulting in loss of certain properties (such as integrity, molecular mass, structure or mechanical strength) and/or fragmentation.

  • degradable
  • packaging film materials
  • degradation mechanism
  • modified

1. Introduction

Plastic was once hailed as one of the greatest inventions of the 20th century, because of its light weight, good processing performance, low price and many other advantages that make the global plastic industry has been rapid development [1]. According to statistics, the total global production of plastic products exceeds 300 million tons [2[2][3][4],3,4], with 13 million tons entering the water [5]. However, only 6–26% of plastic products are recycled, which means that at least 74% of plastic waste ends up in landfills or enters the environment every year [3,6][3][6], of which about 46% comes from the packaging industry, especially food packaging films, which are largely non-recyclable [7]. Since most plastics are now made from non-biodegradable materials, it often takes one to two hundred years to degrade these plastic products [8,9,10,11,12,13][8][9][10][11][12][13].
Plastic is the most commonly used packaging material [14[14][15],15], especially packaging film material. However, the packaging industry generates about 141 million tons of plastic waste each year [16], and most of the packaging film materials are composed of non-degradable materials, which obviously leads to many environmental problems, such as “white pollution” [17,18,19][17][18][19]. General purpose plastic packaging films such as polyethylene (PE), polypropylene (PP), polystyrene (PS) and polyvinyl chloride (PVC) [20,21][20][21] film materials undergo a long period of aging under the current common waste disposal method of sanitary landfill conditions. Under the action of abiotic factors (such as solar radiation, high temperature, wave impact, gravel abrasion) or biotic factors (such as ingestion, colonization, degradation) [22[22][23],23], physical or chemical property changes, molecular weight reduction and molecular weight distribution changes, but its decomposition is not complete, the majority of decomposition into microplastics (particle size < 5 mm) or nanosized-plastics (particle size < 0.1 μm) [24,25][24][25]. At present, microplastics have been widely detected in oceans [24[24][26],26], sediments [27], rivers [28[28][29][30],29,30], lakes [20], atmosphere [31[31][32][33],32,33], soil [34,35][34][35] and organisms [36], disrupting the normal metabolism and energy balance in organisms, thus affecting the normal growth and reproduction of organisms and causing potential harm to human health [37,38][37][38].
To solve these problems, it has become important for biodegradable packaging film materials to replace traditional packaging film materials [39,40][39][40]. However, biodegradable plastics currently account for less than 1% of total plastics production [41]. Compared with traditional packaging film materials, biodegradable packaging film materials are more expensive to produce and have poor mechanical properties and their barrier properties, which are the main reasons for their limited applications [42].

2. Degradation Mechanism of Degradable Packaging Film Materials

Degraded plastics are plastics that have been subjected to defined environmental conditions for a period of time and contain one or more steps that result in significant changes in the chemical structure of the material resulting in loss of certain properties (such as integrity, molecular mass, structure or mechanical strength) and/or fragmentation [43,44][43][44]. As shown in Table 1, the degradation degree can be divided into complete and incomplete degradation, and different degradation mechanisms can be divided into photodegradation, water degradation, thermal oxidative degradation and biodegradation [45].
Table 1.
 The classification and characteristic of degradable plastics.
Classification Category Features
By degradation principle Biodegradable plastics Similar performance to traditional plastics, good degradability, high safety
Photodegradable plastics Simple and low cost production process
Gaurav et al. [69] prepared two high-density polyethylene/polylactic acid blends with and without the addition of a compatibilizer and a pro-oxidant using a melt blending technique. The results showed that the addition of the compatibilizer led to a significant improvement in the mechanical properties of the blends and the addition of the pro-oxidant led to an improvement in their oxidative degradation properties.

2.4. Biodegradable

2.4. Biodegradable

Biodegradable plastics are those degraded by naturally occurring microorganisms under natural conditions such as soil and/or sand, and/or specific conditions such as composting or anaerobic digestion or aqueous cultures, and ultimately degrade to environmentally benign biomass, CO2, CH4 and H2O [70,71,72][70][71][72]. Figure 3 shows the biodegradation mechanism. Biodegradable plastics have stable performance and can be completely degraded and returned to nature in a short period of time under composting conditions [73].
图Figure 3.生物降解的机制。
 The mechanism of biodegradation.
目前的研究表明，动物、植物、微生物和酶都具有降解塑料的能力[74，75]。表 Current research shows that animals, plants, microorganisms and enzymes all have some ability to degrade plastics [74][75]. Table 3显示了普通塑料的生物降解。在改变塑料性能的众多途径中，塑料的生物降解是塑料进入环境不可避免的环境过程之一，也是一种原位、绿色、相对低成本、低技术的塑料垃圾处理方式。 shows the biodegradation of common plastics. Among the many ways to change the properties of plastics, biodegradation of plastics is one of the inevitable environmental processes for plastics to enter the environment, and it is also an in situ, green, relatively low-cost and low-technology way to treat plastic waste.
表Table 3.普通塑料的生物降解。
 Biodegradation of common plastics.
材料Material 条件Conditions 退化的结果The Result of Degradation 引用References
聚乙烯Polyethylene 黄曲霉Degradation of high-density polyethylene with Aspergillus flavus PEDX3菌株降解高密度聚乙烯 strain for 28天 days 降低分子量Molecular weight reduction [76]
聚丙烯Polypropylene 用微藻螺旋藻属降解聚丙烯
Thermal oxidative degradation plastics Requires oxygen and heat
Hydrodegradable plastics Short degradation time, no trace, no pollution, low cost
By degradation characteristics Fully degradable plastics Completely disintegrates and leaves no trace
Incomplete degradable plastics Partial degradation

2.1. Photodegradation

Photodegradable materials are degraded to low molecular weight compounds that are relatively safe for the environment by photo-initiated fracture and free radical oxidative fracture reactions under the action of sunlight (mainly UV light) [46]. Photodegradable film materials can be mainly divided into photodegradable materials obtained by copolymerization and photodegradable materials with composite photosensitizers [47].
In sunlight, UV light with a wavelength of 290 nm–400 nm only accounts for about 5%, and it is the UV light that causes photodegradation of the film. Figure 1 shows the photodegradation mechanism. The molecular chains react under certain conditions of oxygen, temperature and humidity, and the long molecular chains are decomposed into peroxides and eventually achieve photodegradation [48].
Figure 1.
 The mechanism of photodegradation.
Christensen et al. [49] investigated the photodegradation properties of polymers with a 1:1 mass ratio of polycaprolactone to polyvinyl chloride by monitoring CO2 emissions during UV exposure. The results showed that the interaction of the two components in the polymer reduced the photodegradability. Najaf et al. [50] used polyaniline modified TiO2 as a photocatalyst and then combined it with polyvinyl chloride to make photodegradable films. The results showed that the quality of polyaniline decreased by 67% when the molar ratio of polyaniline to TiO2 was 10:1 under the condition of 30W UV lamp irradiation for 720 h, decreased by 12% compared with the pure polyvinyl chloride (PVC) film, and its photodegradation performance was greatly improved.
Photodegradable materials must be exposed to light and have a long degradation period, while most film materials are not exposed to natural light for a long time after disposal and it is difficult to ensure the degradation conditions required for photodegradable film materials, which greatly limits the large-scale application of photodegradable film materials.

2.2. Hydrodegradation

Hydrodegradable plastic is a kind of plastic that can self-degrade by hydrolysis. The essence is the presence of hydrolyzable covalent bonds in degradable plastics, such as esters, ethers, anhydrides, amides, carbamides or ester-amide groups [45], which can achieve dissolution when the plastic encounters water [51,52][51][52]. Water activity, temperature, pH and time are the key factors affecting the efficiency of hydrolysis [53].
Polyvinyl alcohol (PVA) is a water-soluble polymer with a carbon chain as the main chain and a large number of hydroxyl groups on the side chain [54,55][54][55]. It is non-toxic, easily processed, biodegradable, has good mechanical properties [56,57][56][57], and can be mixed with natural polymeric materials such as polysaccharides and proteins to improve its properties [58,59,60][58][59][60]. Mainly used in the packaging of water-soluble products, the buyer can do not touch the product in the process of using the product, safe and at the same time make the use of the product more convenient. However, the resistance of PVA film to water is very low, usually in a very short period of time can be completely dissolved [61]; therefore, if it is widely used in the field of packaging needs, it needs to be modified for water resistance.
Lv et al. [62] investigated the time-dependent hydrolysis behavior of polylactic acid (PLA) and starch/PLA composites. The results showed that the presence of starch may induce hydrolysis to occur at the interface between starch and PLA. In addition, starch can slightly slow down PLA hydrolysis without affecting the degree of PLA hydrolysis. Table 2 shows the water degradation of several common biodegradable polyesters in different water environments.
Table 2.
 Hydrologic degradation of several typical biodegradable polyesters in different water environments. Data from [63].
Material Conditions Weight Loss % Number-Average Molecular Weight (Mn) Mechanical Properties
Polylactic acid (PLA) Seawater <2 96.60 × 103 to 83.85 × 103 No significant change
Germicidal water <2 Degradation of polypropylene with microalgae Spirulina sp. for 112天 days96.60 × 103 to 67.98 × 103
机械强度和相对分子量下降Decrease in mechanical strength and relative molecular weight [77] Poly (butyleneadipate-co-terephthalate) (PBAT) Seawater
聚苯乙烯Polystyrene 聚苯乙烯与阿查替纳黄腐<2 降解Degradation of polystyrene with Achatina fulica for 4周 weeks 质量损失平均为The mass loss was 30.7%，形成氧化中间体官能团46.67 × 103 to 20.31 × 103 Total loss
on average, forming a functional group of oxidation intermediates [78] Germicidal water <2
聚对苯二甲酸乙二醇酯Polyethylene terephthalate 聚对苯二甲酸乙二醇酯与微藻螺旋藻属的降解Degradation of polyethylene terephthalate with microalgae Spirulina sp. for 112天 days46.67 × 103 to 16.02 × 103
机械强度下降Decrease in mechanical strength [77] Poly (butylene succinate) (PBS) Seawater <2 41.56 × 103 to 30.11 × 103 Total loss
聚乳酸Polylactic acid 降解符合Degradation in accordance with ISO 17556 标准 15%的聚乳酸被降解 of Polylactic acid is degraded [79] Germicidal water <2 41.56 × 103 to 18.63 × 103
Polycaprolactone (PCL) Seawater 32 77.79 × 103 to 77.09 × 103 Total loss
Germicidal water <2 77.79 × 103 to 14.82 × 103

2.3. Thermal Oxidative Degradation

Thermally oxygen degraded plastic is that subjected to heat and/or oxidation over a period of time and contains one or more steps that result in significant changes in the chemical structure of the material, resulting in loss of certain properties (such as integrity, molecular mass, structure or mechanical strength) and/or fragmentation [64,65][64][65]. Heat can change the oxidation mechanism of plastics, and higher temperatures can improve the degradation of plastics [66,67][66][67]. Figure 2 shows the mechanism of thermal oxidative degradation. Thermally oxygen degraded plastic is also very difficult to degrade completely in most cases due to the conditions.
Figure 2.
 Auto-oxidation scheme of polymer. Reprinted from Ref. [68]. Copyright (2016), with permission from Elsevier.
在各种可降解机理中，生物降解比其他降解机理更完整、更快速，降解产物无害。可生物降解的塑料可以与有机废物一起堆肥，从而与一般塑料废物相比，消除了人工分拣步骤，大大方便了废物的收集和处置，从而使堆肥和有机废物的无害化处置成为现实[80]。与传统薄膜材料相比，生物降解包装膜材料具有绿色、环保、资源节约等特点，从而逐渐成为包装行业的研究热点，发展可生物降解包装膜是从根本上解决 Among various degradable mechanisms, biodegradation is more complete and faster than other degradation mechanisms, and the degradation products are harmless. Biodegradable plastics can be composted together with organic waste, thus eliminating the manual sorting step compared to general plastic waste, greatly facilitating waste collection and disposal, thus making composting and harmless disposal of organic waste into reality [80]. Biodegradable packaging film materials are green, environment-friendly and resource-saving compared with traditional film materials, thus gradually becoming a research hotspot in the packaging industry, the development of biodegradable packaging film is an effective way to fundamentally solve “白色污染white pollution”的有效途径。.

References

  1. Geyer, R.; Jambeck, J.R.; Law, K.L. Production, Use, and Fate of All Plastics Ever Made. Sci. Adv. 2017, 3, e1700782.
  2. Lin, Z.; Jin, T.; Zou, T.; Xu, L.; Xi, B.; Xu, D.; He, J.; Xiong, L.; Tang, C.; Peng, J.; et al. Current Progress on Plastic/Microplastic Degradation: Fact Influences and Mechanism. Environ. Pollut. 2022, 304, 119159.
  3. Ouyang, Z.; Li, S.; Zhao, M.; Wangmu, Q.; Ding, R.; Xiao, C.; Guo, X. The Aging Behavior of Polyvinyl Chloride Microplastics Promoted by UV-Activated Persulfate Process. J. Hazard. Mater. 2022, 424, 127461.
  4. Paletta, A.; Filho, W.L.; Balogun, A.L.; Foschi, E.; Bonoli, A. Barriers and Challenges to Plastics Valorisation in the Context of a Circular Economy: Case Studies from Italy. J. Clean. Prod. 2019, 241, 118149.
  5. Enfrin, M.; Dumée, L.F.; Lee, J. Nano/Microplastics in Water and Wastewater Treatment Processes—Origin, Impact and Potential Solutions. Water Res. 2019, 161, 621–638.
  6. Alimi, O.S.; Farner Budarz, J.; Hernandez, L.M.; Tufenkji, N. Microplastics and Nanoplastics in Aquatic Environments: Aggregation, Deposition, and Enhanced Contaminant Transport. Environ. Sci. Technol. 2018, 52, 1704–1724.
  7. Wu, F.; Misra, M.; Mohanty, A.K. Challenges and New Opportunities on Barrier Performance of Biodegradable Polymers for Sustainable Packaging. Prog. Polym. Sci. 2021, 117, 101395.
  8. Andrady, A.L.; Pegram, J.E.; Nakatsuka, S. Studies on Enhanced Degradable Plastics: 1. The Geographic Variability in Outdoor Lifetimes of Enhanced Photodegradable Polyethylenes. J. Environ. Polym. Degrad. 1993, 1, 31–43.
  9. Abu-Hilal, A.H.; Al-Najjar, T. Litter Pollution on the Jordanian Shores of the Gulf of Aqaba (Red Sea). Mar. Environ. Res. 2004, 58, 39–63.
  10. Lohr, A.; Savelli, H.; Beunen, R.; Kalz, M.; Ragas, A.; Belleghem, F.V. Solutions for Global Marine Litter Pollution. Curr. Opin. Environ. Sustain. 2017, 28, 90–99.
  11. Bano, K.; Kuddus, M.; RZaheer, M.; Zia, Q.; FKhan, M.; Gupta, A.; Aliev, G. Microbial Enzymatic Degradation of Biodegradable Plastics. Curr. Pharm. Biotechnol. 2017, 18, 429–440.
  12. Ward, C.P.; Armstrong, C.J.; Walsh, A.N.; Jackson, J.H.; Reddy, C.M. Sunlight Converts Polystyrene to Carbon Dioxide and Dissolved Organic Carbon. Environ. Sci. Technol. Lett. 2019, 6, 669–674.
  13. Dharma, H.N.C.; Jaafar, J.; Widiastuti, N.; Matsuyama, H.; Rajabsadeh, S.; Othman, M.H.D.; Rahman, M.A.; Jafri, N.N.M.; Suhaimin, N.S.; Nasir, A.M.; et al. A Review of Titanium Dioxide (TiO2)-Based Photocatalyst for Oilfield-Produced Water Treatment. Membranes 2022, 12, 345.
  14. Prabhakar, P.; Sen, R.K.; Mayandi, V.; Patel, M.; Swathi, B.; Vishwakarma, J.; Gowri, V.S.; Lakshminarayanan, R.; Mondal, D.P.; Srivastava, A.K.; et al. Mussel-Inspired Chemistry to Design Biodegradable Food Packaging Films with Antimicrobial Properties. Process Saf. Environ. Prot. 2022, 162, 17–29.
  15. Jing, X.; Wen, H.; Gong, X.; Xu, Z.; Kajetanowicz, A. Recycling Waste Plastics Packaging to Value-Added Products by Two-Step Microwave Cracking with Different Heating Strategies. Fuel Process. Technol. 2020, 201, 106346.
  16. Ncube, L.K.; Ude, A.U.; Ogunmuyiwa, E.N.; Zulkifli, R.; Beas, I.N. An Overview of Plasticwaste Generation and Management in Food Packaging Industries. Recycling 2021, 6, 12.
  17. Webb, H.K.; Arnott, J.; Crawford, R.J.; Ivanova, E.P. Plastic Degradation and Its Environmental Implications with Special Reference to Poly(Ethylene Terephthalate). Polymers 2013, 5, 1–18.
  18. Rhim, J.-W.; Park, H.-M.; Ha, C.-S. Bio-Nanocomposites for Food Packaging Applications. Prog. Polym. Sci. 2013, 38, 1629–1652.
  19. Al-Thawadi, S. Microplastics and Nanoplastics in Aquatic Environments: Challenges and Threats to Aquatic Organisms. Arab. J. Sci. Eng. 2020, 45, 4419–4440.
  20. Mao, R.; Hu, Y.; Zhang, S.; Wu, R.; Guo, X. Microplastics in the Surface Water of Wuliangsuhai Lake, Northern China. Sci. Total Environ. 2020, 723, 137820.
  21. Ngo, P.L.; Pramanik, B.K.; Shah, K.; Roychand, R. Pathway, Classification and Removal Efficiency of Microplastics in Wastewater Treatment Plants. Environ. Pollut. 2019, 255, 113326.
  22. Galloway, T.S.; Cole, M.; Lewis, C. Interactions of Microplastic Debris throughout the Marine Ecosystem. Nat. Ecol. Evol. 2017, 1, 116.
  23. Song, Y.K.; Hong, S.H.; Jang, M.; Han, G.M.; Jung, S.W.; Shim, W.J. Combined Effects of UV Exposure Duration and Mechanical Abrasion on Microplastic Fragmentation by Polymer Type. Environ. Sci. Technol. 2017, 51, 4368–4376.
  24. Wang, S.; Chen, H.; Zhou, X.; Tian, Y.; Lin, H. Microplastic Abundance, Distribution and Composition in the Mid-West Pacific Ocean. Environ. Pollut. 2020, 264, 114125.
  25. Zhang, L.; Xie, Y.; Zhong, S.; Liu, J.; Qin, Y.; Gao, P. Microplastics in Freshwater and Wild Fishes from Lijiang River in Guangxi, Southwest China. Sci. Total Environ. 2021, 755, 142428.
  26. Cutroneo, L.; Reboa, A.; Besio, G.; Borgogno, F.; Canesi, L.; Canuto, S.; Dara, M.; Enrile, F.; Forioso, I.; Greco, G.; et al. Microplastics in Seawater: Sampling Strategies, Laboratory Methodologies, and Identification Techniques Applied to Port Environment. Environ. Sci. Pollut. Res. 2020, 27, 8938–8952.
  27. Vaughan, R.; Turner, S.D.; Rose, N.L. Microplastics in the Sediments of a UK Urban Lake. Environ. Pollut. 2017, 229, 10–18.
  28. Tibbetts, J.; Krause, S.; Lynch, I.; Smith, G.H.S. Abundance, Distribution, and Drivers of Microplastic Contamination in Urban River Environments. Water Switz. 2018, 10, 1597.
  29. Ding, L.; Mao, R.F.; Guo, X.; Yang, X.; Zhang, Q.; Yang, C. Microplastics in Surface Waters and Sediments of the Wei River, in the Northwest of China. Sci. Total Environ. 2019, 667, 427–434.
  30. Wang, G.; Lu, J.; Tong, Y.; Liu, Z.; Zhou, H.; Xiayihazi, N. Occurrence and Pollution Characteristics of Microplastics in Surface Water of the Manas River Basin, China. Sci. Total Environ. 2020, 710, 136099.
  31. Wright, S.L.; Ulke, J.; Font, A.; Chan, K.; Kelly, F.J. Atmospheric Microplastic Deposition in an Urban Environment and an Evaluation of Transport. Environ. Int. 2019, 136, 105411.
  32. Prata, J.C.; Castro, J.L.; da Costa, J.P.; Duarte, A.C.; Cerqueira, M.; Rocha-Santos, T. An Easy Method for Processing and Identification of Natural and Synthetic Microfibers and Microplastics in Indoor and Outdoor Air. MethodsX 2020, 7, 100762.
  33. Zhang, Q.; Zhao, Y.; Du, F.; Cai, H.; Wang, G.; Shi, H. Microplastic Fallout in Different Indoor Environments. Environ. Sci. Technol. 2020, 54, 6530–6539.
  34. Liu, M.; Lu, S.; Yang, S.; Lei, L.; Hu, J.; Lv, W.; Zhou, W.; Cao, C.; Shi, H.; Yang, X. Microplastic and Mesoplastic Pollution in Farmland Soils in Suburbs of Shanghai, China. Environ. Pollut. 2018, 242, 855–862.
  35. Ding, L.; Zhang, S.; Wang, X.; Yang, X.; Guo, X. The Occurrence and Distribution Characteristics of Microplastics in the Agricultural Soils of Shaanxi Province, in North-Western China. Sci. Total Environ. 2020, 720, 137525.
  36. Payton, T.G.; Beckingham, B.A.; Dustan, P. Microplastic Exposure to Zooplankton at Tidal Fronts in Charleston Harbor, SC USA. Estuar. Coast. Shelf Sci. 2019, 232, 106510.
  37. Wang, F.; Wong, C.S.; Chen, D.; Lu, X.; Wang, F.; Zeng, E.Y. Interaction of Toxic Chemicals with Microplastics: A Critical Review. Water Res. 2018, 139, 208–219.
  38. Zhang, Y.; Liao, A. The Impact of Microplastics on Human Health:A Review. J. Nanjing Univ. Sci. 2020, 56, 8.
  39. Lamberti, F.M.; Román-Ramírez, L.A.; Wood, J. Recycling of Bioplastics: Routes and Benefits. J. Polym. Environ. 2020, 28, 2551–2571.
  40. Panchal, S.S.; Vasava, D.V. Biodegradable Polymeric Materials: Synthetic Approach. ACS Omega 2020, 5, 4370–4379.
  41. Niaounakis, M. Recycling of Biopolymers—The Patent Perspective. Eur. Polym. J. 2019, 114, 464–475.
  42. Dilkes-Hoffman, L.S.; Pratt, S.; Lant, P.A.; Laycock, B. 19—The Role of Biodegradable Plastic in Solving Plastic Solid Waste Accumulation. In Plastics to Energy; Al-Salem, S.M., Ed.; Plastics Design Library; William Andrew Publishing: Norwich, NY, USA, 2019; pp. 469–505. ISBN 978-0-12-813140-4.
  43. Qin, Z.-H.; Mou, J.-H.; Chao, C.Y.H.; Chopra, S.S.; Daoud, W.; Leu, S.; Ning, Z.; Tso, C.Y.; Chan, C.K.; Tang, S.; et al. Biotechnology of Plastic Waste Degradation, Recycling, and Valorization: Current Advances and Future Perspectives. ChemSusChem 2021, 14, 4103–4114.
  44. Zaaba, N.F.; Jaafar, M. A Review on Degradation Mechanisms of Polylactic Acid: Hydrolytic, Photodegradative, Microbial, and Enzymatic Degradation. Polym. Eng. Sci. 2020, 60, 2061–2075.
  45. Liu, L.; Xu, M.; Ye, Y.; Zhang, B. On the Degradation of (Micro)Plastics: Degradation Methods, Influencing Factors, Environmental Impacts. Sci. Total Environ. 2022, 806, 151312.
  46. Bakbolat, B.; Daulbayev, C.; Sultanov, F.; Beissenov, R.; Umirzakov, A.; Mereke, A.; Bekbaev, A.; Chuprakov, I. Recent Developments of TiO2-Based Photocatalysis in the Hydrogen Evolution and Photodegradation: A Review. Nanomaterials 2020, 10, 1790.
  47. Jin, L.; He, S.; Li, D.; Zhang, C. Status of Degradable Materials and Their Progress in Marine Research. Packag. Eng. 2020, 41, 108–115.
  48. Li, J.; Deng, J.; Liang, L. Application Progress of Degradable Plastics in Packaging Products. Plast. Sci. Technol. 2021, 49, 94–98.
  49. Christensen, P.A.; Egerton, T.A.; Martins-Franchetti, S.M.; Jin, C.; White, J.R. Photodegradation of Polycaprolactone/Poly(Vinyl Chloride) Blend. Polym. Degrad. Stab. 2008, 93, 305–309.
  50. Najafi, V.; Ahmadi, E.; Ziaee, F.; Omidian, H.; Sedaghat, H. Polyaniline-Modified TiO2, a Highly Effective Photo-Catalyst for Solid-Phase Photocatalytic Degradation of PVC. J. Polym. Environ. 2019, 27, 784–793.
  51. Krzan, A.; Hemjinda, S.; Miertus, S.; Corti, A.; Chiellini, E. Standardization and Certification in the Area of Environmentally Degradable Plastics. Polym. Degrad. Stab. 2006, 91, 2819–2833.
  52. Solaro, R.; Corti, A.; Chiellini, E. Biodegradation of poly(vinyl alcohol) with different molecular weights and degree of hydrolysis. Polym. Adv. Technol. 2000, 11, 873–878.
  53. Lucas, N.; Bienaime, C.; Belloy, C.; Queneudec, M.; Silvestre, F.; Nava-Saucedo, J.-E. Polymer Biodegradation: Mechanisms and Estimation Techniques—A Review. Chemosphere 2008, 73, 429–442.
  54. Liu, B.; Zhang, J.; Guo, H. Research Progress of Polyvinyl Alcohol Water-Resistant Film Materials. Membranes 2022, 12, 347.
  55. Saini, I.; Sharma, A.; Dhiman, R.; Aggarwal, S.; Ram, S.; Sharma, P.K. Grafted SiC Nanocrystals: For Enhanced Optical, Electrical and Mechanical Properties of Polyvinyl Alcohol. J. Alloys Compd. 2017, 714, 172–180.
  56. Panda, P.K.; Yang, J.-M.; Chang, Y.-H. Water-Induced Shape Memory Behavior of Poly (Vinyl Alcohol) and p-Coumaric Acid-Modified Water-Soluble Chitosan Blended Membrane. Carbohydr. Polym. 2021, 257, 117633.
  57. Yang, J.; Panda, P.K.; Jie, C.J.; Dash, P.; Chang, Y. Poly (Vinyl Alcohol)/Chitosan/Sodium Alginate Composite Blended Membrane: Preparation, Characterization, and Water-induced Shape Memory Phenomenon. Polym. Eng. Sci. 2022, 62, 1526–1537.
  58. Moulay, S. Review: Poly(Vinyl Alcohol) Functionalizations and Applications. Polym.-Plast. Technol. Eng. 2015, 54, 1289–1319.
  59. Abdullah, Z.W.; Dong, Y.; Davies, I.J.; Barbhuiya, S. PVA, PVA Blends, and Their Nanocomposites for Biodegradable Packaging Application. Polym.-Plast. Technol. Eng. 2017, 56, 1307–1344.
  60. Teodorescu, M.; Bercea, M.; Morariu, S. Biomaterials of Poly(Vinyl Alcohol) and Natural Polymers. Polym. Rev. 2018, 58, 247–287.
  61. Liu, B.; Huang, X.; Wang, S.; Wang, D.; Guo, H. Performance of Polyvinyl Alcohol/Bagasse Fibre Foamed Composites as Cushion Packaging Materials. Coatings 2021, 11, 1094.
  62. Lv, S.; Liu, C.; Li, H.; Zhang, Y. Assessment of Structural Modification and Time-Dependent Behavior of Poly (Lactic Acid) Based Composites upon Hydrolytic Degradation. Eur. Polym. J. 2022, 166, 111058.
  63. Wang, G.; Huang, D.; Zhang, W.; Ji, J. Degradation Performance of Typical Biodegradable Polyesters in Seawater. J. Funct. Polym. 2020, 33, 492–499.
  64. Shi, L.; Zhu, J.; Shi, J.; Zhao, X. Classification and Identification of Degradable Plastic Products: Current Situation and Prospect. Plast. Addit. 2021, 3, 1–5.
  65. Chen, Z.; Zhao, W.; Xing, R.; Xie, S.; Yang, X.; Cui, P.; Lü, J.; Liao, H.; Yu, Z.; Wang, S.; et al. Enhanced in Situ Biodegradation of Microplastics in Sewage Sludge Using Hyperthermophilic Composting Technology. J. Hazard. Mater. 2020, 384, 121271.
  66. Ammala, A.; Bateman, S.; Dean, K.; Petinakis, E.; Sangwan, P.; Wong, S.; Yuan, Q.; Yu, L.; Patrick, C.; Leong, K.H. An Overview of Degradable and Biodegradable Polyolefins. Prog. Polym. Sci. 2011, 36, 1015–1049.
  67. Chiellini, E.; Corti, A.; D’Antone, S.; Baciu, R. Oxo-Biodegradable Carbon Backbone Polymers—Oxidative Degradation of Polyethylene under Accelerated Test Conditions. Polym. Degrad. Stab. 2006, 91, 2739–2747.
  68. Chen, L.; Yamane, S.; Sago, T.; Hagihara, H.; Kutsuna, S.; Uchimaru, T.; Suda, H.; Sato, H.; Mizukado, J. Experimental and Modeling Approaches for the Formation of Hydroperoxide during the Auto-Oxidation of Polymers: Thermal-Oxidative Degradation of Polyethylene Oxide. Chem. Phys. Lett. 2016, 657, 83–89.
  69. Madhu, G.; Bhunia, H.; Bajpai, P.K.; Nando, G.B. Physico-Mechanical Properties and Biodegradation of Oxo-Degradable HDPE/PLA Blends. Polym. Sci. Ser. A 2016, 58, 57–75.
  70. Amaral-Zettler, L.A.; Zettler, E.R.; Mincer, T.J. Ecology of the Plastisphere. Nat. Rev. Microbiol. 2020, 18, 139–151.
  71. Elahi, A.; Bukhari, D.A.; Shamim, S.; Rehman, A. Plastics Degradation by Microbes: A Sustainable Approach. J. King Saud Univ.-Sci. 2021, 33, 101538.
  72. Kyrikou, I.; Briassoulis, D. Biodegradation of Agricultural Plastic Films: A Critical Review. J. Polym. Environ. 2007, 15, 125–150.
  73. Reddy, R.L.; Reddy, V.S.; Gupta, G.A. Study of Bio-Plastics as Green & Sustainable Alternative to Plastics. Int. J. Emerg. Technol. Adv. Eng. 2013, 3, 82–89.
  74. Qin, M.; Chen, C.; Song, B.; Shen, M.; Gong, J. A Review of Biodegradable Plastics to Biodegradable Microplastics: Another Ecological Threat to Soil Environments? J. Clean. Prod. 2021, 312, 127816.
  75. Liwarska-Bizukojc, E. Effect of (Bio)Plastics on Soil Environment: A Review. Sci. Total Environ. 2021, 795, 148889.
  76. Zhang, J.; Gao, D.; Li, Q.; Zhao, Y.; Li, L.; Lin, H.; Bi, Q.; Zhao, Y. Biodegradation of Polyethylene Microplastic Particles by the Fungus Aspergillus flavus from the Guts of Wax Moth Galleria mellonella. Sci. Total Environ. 2020, 704, 135931.
  77. Khoironi, A.; Anggoro, S.; Sudarno, S. Evaluation of the Interaction Among Microalgae Spirulina sp., Plastics Polyethylene Terephthalate and Polypropylene in Freshwater Environment. J. Ecol. Eng. 2019, 20, 161–173.
  78. Song, Y.; Qiu, R.; Hu, J.; Li, X.; He, D. Biodegradation and Disintegration of Expanded Polystyrene by Land Snails Achatina fulica. Sci. Total Environ. 2020, 746, 141289.
  79. Cucina, M.; De Nisi, P.; Trombino, L.; Tambone, F.; Adani, F. Degradation of Bioplastics in Organic Waste by Mesophilic Anaerobic Digestion, Composting and Soil Incubation. Waste Manag. 2021, 134, 67–77.
  80. Edaes, F.S.; De Souza, C.B. Conventional Plastics’ Harmful Effects and Biological and Molecular Strategies for Biodegradable Plastics’ Production. Curr. Biotechnol. 2020, 9, 242–254.
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/)
ScholarVision Creations
Feedback