This entry aimed to morphologically characterize and determine the aflatoxigenic and non-aflatoxigenic Aspergillus flavus isolates. Macromorphological characteristics were determined by observing the colony color and texture, while the micromorphological characteristics were determined by examining the spore color, size, structure, conidiophore structure, and vesicle shape. The production of aflatoxin was determined by direct visualization of the UV fluorescence of A. flavus colonies on CCA. Aflatoxin was qualitatively detected in 18 (45%) isolates of A. flavus using UV fluorescence screening while the remaining 22 (55%) isolates did not exhibit any aflatoxin production.
AFs are extremely potent carcinogens, predominantly found in cereal crops, like corn, rice, nuts, and sorghum [1]. Currently, several AFs have been discovered; however, the most significant AF are AFB
1
, AFB
2
, AFG
1
, and AFG
2
[2]. Food contamination with aflatoxigenic
Aspergillus spp. and the subsequent production of AF could take place during, pre-and post-harvest stages [3,4,5,6,7]. Food contamination by AFs depends on vulnerability, environmental factors, fungal community, and their capacity to penetrate the food. Humans could be exposed to AF through sporadic intake of adulterated foodstuff, causing nutritional deficiencies, immunosuppression, and hepatocellular carcinoma [8].
and the subsequent production of AF could take place during, pre-and post-harvest stages [3][4][5][6][7]. Food contamination by AFs depends on vulnerability, environmental factors, fungal community, and their capacity to penetrate the food. Humans could be exposed to AF through sporadic intake of adulterated foodstuff, causing nutritional deficiencies, immunosuppression, and hepatocellular carcinoma [8].
Owing to the tropical climate of Malaysia, the temperature remains around 28°C to 31°C [9], and humidity ranges from 60% to 80% [10] throughout the year, which provides a suitable environment for
A. flavus
to contaminate the food and food products, and produce AF. To the best of our knowledge, no work has been documented thus far on the prevalence of aflatoxigenic and non-aflatoxigenic strains of
A. flavus
isolated from sweet corn kernels and soil samples collected from the Cameron Highlands region.
Forty isolates of
A. flavus
were detected from the sweet corn and soil samples (
). The
A. flavus
isolates were identified through the observation of their morphological characteristics as per the key descriptions by Klich [11] and Clayton [12].
Figure 1.
Prevalence of
A. flavus
isolates in Kampong Raja, Rose Valley, Kea, and Klebang farms; black bars = soil samples; grey bars = maize samples.
The morphology of
A. flavus
colonies on PDA is presented in
. In the beginning, the mycelial color of
A. flavus
was white. Following 3 d of incubation, the
A. flavus
colony formed olive-green conidia that dominated the colony’s appearance. Generally, the colonies were flat at their borders while raised in the middle. On PDA, all the
A. flavus
isolates produced exudates (droplets) that are brown in color or colorless.
Figure 2.
Colony morphology of
A. flavus
on the potato dextrose agar (PDA); (
A
) = obverse, (
B
) = reverse.
On DRBC (
), the
A. flavus
isolates initially produced white mycelia that were smooth and upraised. Following 3 d of incubation, they produced dark yellow conidia, which transformed into olive green after 6 d. No sclerotia were produced by
A. flavus
isolates on DRBC. The exudates (liquid droplets) produced were colorless and embedded in the mycelia. The
A. flavus
isolates did not yield any soluble pigments on DRBC. The reverse sides of
A. flavus
colonies were colorless. Light purple is the original color of DRBC. The colonies’ diameter of
A. flavus
ranged from 50 to 70 mm.
Figure 3.
Colony morphology of
A. flavus
on dichloran rose bengal chloramphenicol (DRBC); (
A
) = obverse, (
B
) = reverse.
The inoculation of
A. flavus
on AFPA resulted in the colonies having various profiles and dimensions (
). The colonies’ color of
A. flavus
on AFPA was whitish brown with dispersed conidia. On AFPA, the isolates of
A. flavus
did not produce exudates or soluble pigments.
A. flavus
produced a bright orange or golden color on the reverse due to the reaction between aspergillic acid with ferric ammonium citrate contained in the medium.
Figure 4.
Colony morphology of
A. flavus
on
Aspergillus flavus
and
parasiticus
agar (AFPA); (
A
) = obverse, (
B
) = reverse.
The microscopic characteristics of
A. flavus
are shown in
. Under the microscope, the conidiophores of
A. flavus
isolates were colorless, thick-walled, roughed, and bearing vesicles. The diameter of the conidiophores ranged from 800 to 1200 µm. The vesicle shape of
A. flavus
isolates was globose to sub-globose. The diameter of the vesicles ranged from 1800 to 2000 µm. The cells were uniseriate or biseriate. In the biseriate cells, the phialides grew on the metulae whereas, in uniseriate cells, they grew on the vesicles. The metulae enclosed the vesicles’ surface and emitted in all directions. The conidia were globose, thin-walled, slightly roughed, and ranged from 250 to 450 µm in diameter.
Figure 5.
Microscopic characteristics of
A. flavus
; (
A
) = conidiophores and conidia under 10× objective; (
B
) = conidiophore and conidia under the 100× objective; (
C
) = conidia under the 100× objective of the stereo–binocular microscope (Magnus M24).
represents the findings obtained from the UV light screening of
A. flavus
, displaying the fluorescent and non-fluorescent isolates of
A. flavus
on CCA. It was found that 18 (45%) out of 40 isolates fluoresced blue on CCA once they were exposed to UV light (365 nm), thus indicating the ability of aflatoxin production (
). On the other hand, the remaining 22 (55%) isolates did not exhibit blue fluorescence in UV light, thus classified as non-aflatoxigenic isolates of
A. flavus
. The distribution of the aflatoxigenic and non-aflatoxigenic isolates of
A. flavus
in four different farms is presented in
.
Figure 6.
Colonies of the aflatoxigenic and non-aflatoxigenic isolates of
A. flavus
observed under UV light (365 nm); (
A
) = aflatoxigenic obverse, (
B
) = aflatoxigenic reverse, (
C
) = non-aflatoxigenic obverse, (
D
) = non-aflatoxigenic reverse.
Figure 7.
The distribution of the aflatoxigenic and the non-aflatoxigenic
A. flavus
isolates in four sweet corn-growing farms in Malaysia. Black bars = number of
A. flavus
isolates and their respective percentage figure.
Overall, the
A. flavus
had olive-green, yellowish-green, or dark green colonies surrounded by a white circle that was eventually covered by conidia. The colonies’ textures were usually velvety or woolly with a floccose center. The
A. flavus
colonies produced exudates on two of the four culture media utilized in this study. Similarly, sclerotia were detected in the majority of
A. flavus
isolates, as it is a specific characteristic of aflatoxigenic
A. flavus
. In the interpretation of the taxonomic descriptions by Klich [11], the isolates’ colony morphology in this study bore a resemblance to
A. flavus
as shown in
and
. On the other hand, some other
Aspergillus
species have the same phenotypical characteristics and which makes it difficult to differentiate them from
A. flavus
. It is known to have the same colony color as
A. oryzae
. This renders the need for comprehensive scrutiny using microscopic and macroscopic characteristics for accurate identification and classification. However, there is a consensus that, even microscopically, some characteristics are common among
Aspergillus
isolates [12]. The microscopic features of
A. flavus
such as conidiophore, vesicles, sterigmata and conidia were examined in this study.
The screening of
A. flavus
isolates, based on their fluorescence characteristics under UV light at 365 nm was carried out. Once the aflatoxigenic isolates of
A. flavus
were exposed to UV light, they showed a blue fluorescence on the reverse of the colonies, while the non-aflatoxigenic
A. flavus
did not show any fluorescence (
). Although the culture-based techniques are comparatively simple and economical, for aflatoxin detection, however, these techniques are usually employed in combination with chromatographic methods [13]. For the precise quantification of aflatoxin, a more advanced method such as high-performance liquid chromatography equipped with fluorescence detection (HPLC-FLD) would be useful. Similarly, it has been reported that strains of
A. flavus
could produce B and G aflatoxins [14], a recent classification of
Aspergillus
section
Flavi
noted that such strains, though morphologically similar to
A. flavus, were completely novel species [15,16,17]. These outcomes pointed out the fact that modern molecular approaches are mandatory to be used for
, were completely novel species [15][16][17]. These outcomes pointed out the fact that modern molecular approaches are mandatory to be used for
A. flavus
isolates’ characterization.
In conclusion, both aflatoxigenic and non-aflatoxigenic strains of
A. flavus
were present in the sweet corn kernels and soil of Cameron Highlands, Malaysia. Cameron Highlands being a primary source of agricultural produce could take measures to ensure that aflatoxin contamination is minimized. Non-aflatoxigenic strains indigenously present could be further harnessed into a biological control agent that can reduce the dependency on chemically synthesized pesticides. Culture media and morphology are rapid tools for the characterization of
A. flavus
. The morphological characteristics of these isolates were similar to those explained in the published identification manuals. The screening of
A. flavus isolates for aflatoxin detection under UV light (365 nm) is a fast and reliable method to distinguish the aflatoxigenic and non-aflatoxigenic isolates. Although the culture-based techniques are comparatively simple and economical, however, for the precise quantification of aflatoxin, a more advanced method such as high-performance liquid chromatography equipped with fluorescence detection (HPLC-FLD) would be useful. This further reinforces the need for measures to prevent the fungal contamination of sweet corn and emphasizes the importance of field interventions aimed at curbing agricultural soil contamination by these fungi.
References
isolates for aflatoxin detection under UV light (365 nm) is a fast and reliable method to distinguish the aflatoxigenic and non-aflatoxigenic isolates. Although the culture-based techniques are comparatively simple and economical, however, for the precise quantification of aflatoxin, a more advanced method such as high-performance liquid chromatography equipped with fluorescence detection (HPLC-FLD) would be useful. This further reinforces the need for measures to prevent the fungal contamination of sweet corn and emphasizes the importance of field interventions aimed at curbing agricultural soil contamination by these fungi.