Submitted Successfully!
To reward your contribution, here is a gift for you: A free trial for our video production service.
Thank you for your contribution! You can also upload a video entry or images related to this topic.
Version Summary Created by Modification Content Size Created at Operation
1
Lilia Sabantina
 + 1324 word(s) 1324 2021-04-29 09:03:00 |
2 update layout and reference
Rita Xu
 Meta information modification 1324 2021-05-07 10:04:16 |

Video Upload Options

We provide professional Video Production Services to translate complex research into visually appealing presentations. Would you like to try it?
No, upload directly Yes

Confirm

Are you sure to Delete?
Yes No
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Sabantina, L.; Blachowicz, T. Electrospun Nanofiber Mats. Encyclopedia. Available online: https://encyclopedia.pub/entry/9264 (accessed on 16 November 2024).
Sabantina L, Blachowicz T. Electrospun Nanofiber Mats. Encyclopedia. Available at: https://encyclopedia.pub/entry/9264. Accessed November 16, 2024.
Sabantina, Lilia, Tomasz Blachowicz. "Electrospun Nanofiber Mats" Encyclopedia, https://encyclopedia.pub/entry/9264 (accessed November 16, 2024).
Sabantina, L., & Blachowicz, T. (2021, May 02). Electrospun Nanofiber Mats. In Encyclopedia. https://encyclopedia.pub/entry/9264
Sabantina, Lilia and Tomasz Blachowicz. "Electrospun Nanofiber Mats." Encyclopedia. Web. 02 May, 2021.
Electrospun Nanofiber Mats
Edit
This entry is adapted from the peer-reviewed paper 10.3390/polym13091368

Air pollution is one of the biggest health and environmental problems in the world and a huge threat to human health on a global scale. Due to the great impact of respiratory viral infections, chronic obstructive pulmonary disease, asthma, emphysema, lung disease, and heart disease, respiratory allergies are increasing significantly every year. Because of the special properties of electrospun nanofiber mats, e.g., large surface-to-volume ratio and low basis weight, uniform size, and nanoporous structure, nanofiber mats are the preferred choice for use in large-scale air filtration applications. 

air filtration electrospinning nanofibers mats nanofibers

1. Introduction

The atmosphere contains toxic particulate matter (PM) pollutants that are a mixture of particles, microorganisms, spores, toxic gases, heavy metal dusts, and organic pollutants, such as polycyclic aromatic hydrocarbons, benzene, and aerosol particles. In particular, small particles with a diameter of less than 2.5 μm pose a risk of penetrating deep into the bronchioles and human lungs and directly affecting lung breathing. Inhalation of these particles increases teratogenic, mutagenic and carcinogenic risk and leads to lung diseases, such as asthma, stroke, lung cancer, and heart disease [1][2][3][4][5][6][7]. Moreover, air pollutants greatly affect global health, and particulate matter (PM) plays a crucial role among these contaminants [8]. In many areas where air filtration is important, cleaning air and filtering out small air pollutants are very relevant approaches. In biotechnological field, the main requirements are the control of air pollutants, hazardous biological resources and aerosol particles. The automotive and aerospace industries are still looking for the quality and safety of a product aspect to minimize the amount of pollutants. However, the semiconductor industry has already adopted clean room technology to control and reduce product contamination [9][10][11]. In order to achieve high performance air filtration, different materials, including foams, carbon fibers, carbon nanotubes, and different types of fiber filters, such as standard glass, melt blown, cellulose and spunbond fibers, and the mixture of different materials were investigated aiming various air filtration applications [12][13][14][15][16]. Among them, fiber materials have become an important branch of filter materials due to the simplicity of processing and their porous structure. Technically, conventional filtration media like melt-blown and glass fiber cannot capture aerosol fine dust because the pore size of microfibers is relatively large and bacterial filtration is still limited [17]. Hence, these fibrous materials have limited efficiency in filtering the finest particles and are not suitable for all applications because of their large pore size structure and micro-scale fiber diameter [18][19]. Recently, some technologies have been developed to produce nanofibers, such as drawing process, sea-island spinning, and electrospinning, which are more successful in terms of filtering performances and capturing small particles [20][21].

Along with the development of nanofiber production technology, electrospinning is one of the most common and cost effective technologies due to the exceptional properties of nanofibers. The simplicity of use and versatility of using different bio-based and synthetic polymers, as well as blends, offers many advantages over conventional nonwoven manufacturing methods [22][23][24][25]. In addition, the uniformity of nanofibers and nanofiber mat structure with small fiber diameters and the associated ratio of large specific surface area to volume offer further advantages. The nanofiber mats include physical properties, such as high porosity and ultra-thin fiber diameters, as well as advanced chemical properties, such as permeability and porosity, associated with the geometric structure of the fibers [26][27]. Furthermore, it is possible to selectively produce and control the pore size between the nanofibers according to the application definition. In addition, by introducing the antimicrobial agents and particles and changing the morphology of the nanofiber mats into the nanoscale, well-cross-linked pore structure, all the conditions required for trapping fine particles can be met [28][29][30][31][32].

Furthermore, mechanical stability can be enhanced by embedding them in composites or adding more stable layers using 3D printing [33][34]. Other benefits include higher air permeability due to the slip-flow effect of nanofiber mats, which exhibit small pore size and high porosity, and good electrostatic effect, making it very suitable for air filtration applications. Nanofiber mats offer many advantages and have emerged as ideal candidates for suitable and efficient air filtration materials to purify the air. Since they can be effectively and inexpensively manufactured by electrospinning, they offer a promising strategy for efficient air filter materials [35][36][37]. According to the results of several research groups, nanofibers can easily be produced by electrospinning process from natural materials, such as polysaccharides, collagen, silk, cellulose, or synthetic polymers, such as polyacrylonitrile (PAN), poly(lactic acid) (PLA), acrylonitrile butadiene styrene (ABS), polyurethane (PU), polyvinyl alcohol (PVA), poly(ethylene glycol) (PEG), polystyrene (PS), polypropylene (PP), polyethylene terephthalate (PET), polyamide-6 (PA-6), etc. These and many other polymers are well known in the field of filter materials and are applied in air filter applications [38][39][40]. Many different nanofibers with defined properties can also be produced by adding particles and admixtures, and the number of variations is quite impressive. Despite that, many research studies have been committed to improve the air filter materials with high-performance air filters with high filtration efficiency to protect the environment.

2. Production Methods of Nanofibers Mats

Interest in electrospinning and nanofiber mats is increasing year by year, and various methods for fabricating nanofibers are described in the literature, including melt electrospinning, coaxial electrospinning, multi-jet electrospinning, needleless electrospinning, bubble electrospinning, electro-blowing, cylindrical porous hollow tube electrospinning, self-bundling electrospinning, and charge injection electrospinning [41]. Among all of these techniques, electrospinning is the most widely used and represents the simplest method for producing nanofibers with a large number of different polymers and admixtures [42][43]. Electrospinning is a simple technology used to produce continuous fine fibers or fiber mats with diameters in the nanometer range. The ultrathin fibers can be made from a variety of materials, such as polymer composites or melts, inorganic or inorganic/organic materials, possibly including ceramics, metallic nanoparticles, particulates, carbon nanotubes, etc., for defined applications [44][45][46][47][48]. Figure 1 shows the production process of nanofibers with particles by simply adding the particles to the electrospinning solution, mixing and producing nanofiber mats with embedded particles.

Polymers 13 01368 g001 550

Figure 1. Simple production of nanofibers with particles by adding particles to electrospinning solution.

All electrospinning techniques, such as the needle-based and the needle-free, are based on the same principle (Figure 2). These involve a high electric field applied to a polymer solution, which allows the fibers to form a Taylor cone at the electrode.

Polymers 13 01368 g002 550

Figure 2. Basic set-up for (a) needle based and (b) needleless electrospinning (Nanospider).

The standard needle-based electrospinning systems can be set up in two ways with vertical and horizontal orientation. Due to the working conditions, needleless electrospinning is divided into two types as rotating or stationary spinnerets. The spinnerets connected to a high voltage supply and a dosing unit for the spinning solution play the most important role for fiber quality and productivity. Nanofibers can easily be produced by adjustable control and a polymer solution reservoir (e.g., a syringe with a small diameter). The main parameters for both methods are the solution, the operating and the environmental parameters [49].

Needleless electrospinning is a self-organized process that allows electrospinning of nanofibers directly from an open liquid surface. During the whole process, a thin layer of a polymer solution is built up and rotated on the spinneret surface. This rotation produces conical peaks on the surface of the solution. At the same time, the electrical forces create Taylor cones and create nanofibers.

When preparing the electrospinning solution, the polymers become inserted into a solvent for dissolving and forming polymer electrospinning solution. Most of the polymers used to make nanofibers are dissolved in harmful to highly hazardous organic solvents. Some of them are highly flammable, toxic, harmful to the environment, need special waste disposal, and can cause harm to people, and pose high health and safety requirements [50]. Therefore, there is more demand and interest in “green electrospinning” and low-toxic solvents, such as dimethyl sulfoxide (DMSO), because it is easier to handle and does not cause any problem with disposal. This is why research groups use it. Especially, many researchers are interested in environmentally friendly electrospinning, in which low-toxic solvents and biopolymers are used to produce nanofibers [51][52].

References

  1. Neira, M.P. Air Pollution and Human Health: A Comment from the World Health Organization. Ann. Glob. Health 2019, 85, 141.
  2. Yang, X.; Zhang, L.; Chen, X.; Liu, F.; Shan, A.; Liang, F.; Li, X.; Wu, H.; Yan, M.; Ma, Z.; et al. Long-term exposure to ambient PM2.5 and stroke mortality among urban residents in northern China. Ecotoxicol. Environ. Saf. 2021, 213, 112063.
  3. Lin, H.; Tao, J.; Du, Y.; Liu, T.; Qian, Z.; Tian, L.; Di, Q.; Zeng, W.; Xiao, J.; Guo, L.; et al. Differentiating the effects of characteristics of PM pollution on mortality from ischemic and hemorrhagic strokes. Int. J. Hyg. Environ. Health 2016, 219, 204–211.
  4. Van Gemert, F.; De Jong, C.; Kirenga, B.; Musinguzi, P.; Buteme, S.; Sooronbaev, T.; Tabyshova, A.; Emilov, B.; Mademilov, M.; Le An, P.; et al. Effects and acceptability of implementing improved cookstoves and heaters to reduce household air pollution: A FRESH AIR study. NPJ Prim. Care Respir. Med. 2019, 29, 32.
  5. Mbandi, A.M. Air Pollution in Africa in the time of COVID-19: The air we breathe indoors and outdoors. Clean Air J. 2020, 30, 1–3.
  6. Karliansyah, M.R. Air pollution impacts on human health and policies to reduce air pollution. Med. J. Indones. 2020, 29, 6–7.
  7. Brauer, M.; Casadei, B.; Harrington, R.A.; Kovacs, R.; Sliwa, K. Taking a Stand Against Air Pollution—The Impact on Cardiovascular Disease: A Joint Opinion from the World Heart Federation, American College of Cardiology, American Heart Association, and the European Society of Cardiology. J. Am. Coll. Cardiol. 2021, 77, 1684–1688.
  8. Setti, L.; Passarini, F.; De Gennaro, G.; Barbieri, P.; Perrone, M.G.; Borelli, M.; Palmisani, J.; Di Gilio, A.; Torboli, V.; Fontana, F.; et al. SARS-Cov-2RNA found on particulate matter of Bergamo in Northern Italy: First evidence. Environ. Res. 2020, 188, 109754.
  9. Mirzaei-Alavijeh, M.; Jalilian, F.; Dragoi, E.N.; Pirouzeh, R.; Solaimanizadeh, L.; Khashij, S. Self-care behaviors related to air pollution protection questionnaire: A psychometric analysis. Arch. Public Health 2020, 78, 1–8.
  10. Sandle, T. Chapter 5—Cleanrooms and Environmental Monitoring. In Biocontamination Control for Pharmaceuticals and Healthcare; Sandle, T., Ed.; Academic Press: San Diego, CA, USA, 2019; pp. 65–82.
  11. Khumpuang, S.; Imura, F.; Hara, S. Analyses on Cleanroom-Free Performance and Transistor Manufacturing Cycle Time of Minimal Fab. IEEE Trans. Semicond. Manuf. 2015, 28, 551–556.
  12. Hu, S.C.; Wu, J.S.; Chan, D.Y.L.; Hsu, R.T.C.; Lee, J.C.C. Power consumption benchmark for a semiconductor cleanroom facility system. Energy Build. 2008, 40, 1765–1770.
  13. Lee, T.; Ku, B.K.; Walker, R.; Kulkarni, P.; Barone, T.; Mischler, S. Aerodynamic size separation of glass fiber aerosols. J. Occup. Environ. Hyg. 2020, 17, 301–311.
  14. Zhang, H.; Liu, J.; Zhang, X.; Huang, C.; Jin, X. Design of electret polypropylene melt blown air filtration material containing nucleating agent for effective PM2.5 capture. RSC Adv. 2018, 8, 7932–7941.
  15. Liu, C.; Dai, Z.; Zhou, R.; Ke, Q.; Huang, C. Fabrication of Polypropylene-g-(Diallylamino Triazine) Bifunctional Nonwovens with Antibacterial and Air Filtration Activities by Reactive Extrusion and Melt-Blown Technology. J. Chem. 2019, 2019, 3435095.
  16. Zhu, M.; Cao, Q.; Liu, B.; Guo, H.; Wang, X.; Han, Y.; Sun, G.; Li, Y.; Zhou, J. A novel cellulose acetate/poly (ionic liquid) composite air filter. Cellulose 2020, 27, 3889–3902.
  17. Hwang, S.; Roh, J.; Park, W.M. Comparison of the relative performance efficiencies of melt-blown and glass fiber filter media for managing fine particles. Aerosol Sci. Technol. 2018, 52, 451–458.
  18. Appert-Collin, J.-C.; Thomas, D. 2—Fibrous Media. In Aerosol Filtration; Thomas, D., Charvet, A., Bardin-Monnier, N., Appert-Collin, J.-C., Eds.; Elsevier: Amsterdam, The Netherlands, 2017; pp. 31–47.
  19. Zhao, X.; Wang, S.; Yin, X.; Yu, J.; Ding, B. Slip-Effect Functional Air Filter for Efficient Purification of PM2.5. Sci. Rep. 2016, 6, 35472.
  20. Zhang, Z.; Tu, W.; Peijs, T.; Bastiaansen, C.W.M. Fabrication and properties of poly(tetrafluoroethylene) nanofibres via sea-island spinning. Polymer 2017, 109, 321–331.
  21. Suzuki, A.; Arino, K. Polypropylene nanofiber sheets prepared by CO2 laser supersonic multi-drawing. Eur. Polym. J. 2012, 48, 1169–1176.
  22. Wortmann, M.; Frese, N.; Mamun, A.; Trabelsi, M.; Keil, W.; Büker, B.; Javed, A.; Tiemann, M.; Moritzer, E.; Ehrmann, A.; et al. Chemical and morphological transition of poly(Acrylonitrile)/poly(vinylidene fluoride) blend nanofibers during oxidative stabilization and incipient carbonization. Nanomaterials 2020, 10, 1210.
  23. Sabantina, L.; Mirasol, J.R.; Cordero, T.; Finsterbusch, K.; Ehrmann, A. Investigation of needleless electrospun PAN nanofiber mats. AIP Conf. Proc. 2018, 1952, 020085.
  24. Grothe, T.; Wehlage, D.; Böhm, T.; Remche, A.; Ehrmann, A. Needleless electrospinning of PAN nanofiber mats. Tekstilec 2017, 60, 290–295.
  25. Cho, C.J.; Chang, Y.S.; Lin, Y.Z.; Jiang, D.H.; Chen, W.H.; Lin, W.Y.; Chen, C.W.; Rwei, S.P.; Kuo, C.C. Green electrospun nanofiber membranes filter prepared from novel biomass thermoplastic copolyester: Morphologies and filtration properties. J. Taiwan Inst. Chem. Eng. 2020, 106, 206–214.
  26. Xiao, B.; Huang, Q.; Chen, H.; Chen, X.; Long, G. A fractal model for capillary flow through a single tortuous capillary with roughened surfaces in fibrous porous media. Fractals 2021, 29, 2150017.
  27. Xiao, B.; Zhang, Y.; Wang, Y.; Jiang, G.; Liang, M.; Chen, X.; Long, G. A Fractal Model for Kozeny-Carman Constant and Dimensionless Permeability of Fibrous Porous Media with Roughened Surfaces. Fractals 2019, 27, 1950116.
  28. Jiang, S.; Schmalz, H.; Agarwal, S.; Greiner, A. Electrospinning of ABS nanofibers and their high filtration performance. Adv. Fiber Mater. 2020, 2, 34–43.
  29. Choi, A.; Park, J.; Kang, J.; Jonas, O.; Kim, D.; Kim, H.; Oh, J.W.; Kang, Y.C. Surface characterization and investigation on antibacterial activity of CuZn nanofibers prepared by electrospinning. Appl. Surf. Sci. 2020, 508, 144883.
  30. Prabu, G.T.V.; Dhurai, B.; Saxena, A. Influence of high voltage polarity in multi-pin upward electrospinning system on the Fiber morphology of poly (vinyl alcohol). J. Polym. Res. 2020, 27, 47.
  31. Wang, X.; Xiang, H.; Song, C.; Zhu, D.; Sui, J.; Liu, Q.; Long, Y. Highly efficient transparent air filter prepared by collecting-electrode-free bipolar electrospinning apparatus. J. Hazard. Mater. 2020, 385, 121535.
  32. Lubasova, D.; Netravali, A.N. A Novel Method for Electrospinning Nanofibrous 3-D Structures. Fibers 2020, 8, 27.
  33. Kozior, T.; Mamun, A.; Trabelsi, M.; Wortmann, M.; Lilia, S.; Ehrmann, A. Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites. Polymers 2019, 11, 2034.
  34. Kozior, T.; Trabelsi, M.; Mamun, A.; Sabantina, L.; Ehrmann, A. Stabilization of Electrospun Nanofiber Mats Used for Filters by 3D Printing. Polymers 2019, 11, 1618.
  35. Jabbar, Z.; Jawad, H.; Hameed, O. Preparation of Blended Nanocomposite Nanofiber Materials for Air Purification. IOP Conf. Ser. Mater. Sci. Eng. 2018, 433, 012073.
  36. Buivydiene, D.; Krugly, E.; Ciuzas, D.; Tichonovas, M.; Kliucininkas, L.; Martuzevicius, D. Formation and characterisation of air filter material printed by melt electrospinning. J. Aerosol Sci. 2019, 131, 48–63.
  37. Beermann, F.; Schwakenberg, M.; Voigt, A.; Ehrmann, A. Influence of Substrate Materials on Electrospun PAN Nanofiber Mats. In Proceedings of the IEEE 8th International Conference Nanomaterials: Application & Properties (NAP), Zatoka, Ukraine, 9–14 September 2018. 03TFNMC27.
  38. Schiffman, J.D.; Schauer, C.L. A Review: Electrospinning of Biopolymer Nanofibers and their Applications. Polym. Rev. 2008, 48, 317–352.
  39. Bhardwaj, N.; Kundu, S.C. Electrospinning: A fascinating fiber fabrication technique. Biotechnol. Adv. 2010, 28, 325–347.
  40. Peresin, M.S.; Habibi, Y.; Vesterinen, A.H.; Rojas, O.J.; Pawlak, J.J.; Seppälä, J.V. Effect of moisture on electrospun nanofiber composites of poly(vinyl alcohol) and cellulose nanocrystals. Biomacromolecules 2010, 11, 2471–2477.
  41. Alghoraibi, I.; Alomari, S. Different Methods for Nanofiber Design and Fabrication. In Handbook of Nanofibers; Barhoum, A., Bechelany, M., Makhlouf, A., Eds.; Springer: Cham, Switzerland, 2018; pp. 1–46.
  42. Sabantina, L.; Rodríguez-Cano, M.Á.; Klöcker, M.; García-Mateos, F.J.; Ternero-Hidalgo, J.J.; Mamun, A.; Beermann, F.; Schwakenberg, M.; Voigt, A.L.; Rodríguez-Mirasol, J.; et al. Fixing PAN nanofiber mats during stabilization for carbonization and creating novel metal/carbon composites. Polymers 2018, 10, 735.
  43. Trabelsi, M.; Mamun, A.; Klöcker, M.; Sabantina, L.; Großerhode, C.; Blachowicz, T.; Ehrmann, A. Increased Mechanical Properties of Carbon Nanofiber Mats for Possible Medical Applications. Fibers 2019, 7, 98.
  44. Mamun, A.; Trabelsi, M.; Klöcker, M.; Sabantina, L.; Großerhode, C.; Blachowicz, T.; Grötsch, G.; Cornelißen, C.; Streitenberger, A.; Ehrmann, A. Electrospun Nanofiber Mats with Embedded Non-Sintered TiO2 for Dye-Sensitized Solar Cells (DSSCs). Fibers 2019, 7, 60.
  45. Blachowicz, T.; Ehrmann, A. Most recent developments in electrospun magnetic nanofibers: A review. J. Eng. Fibers Fabr. 2020, 15, 1558925019900843.
  46. Wehlage, D.; Blattner, H.; Mamun, A.; Kutzli, I.; Diestelhorst, E.; Rattenholl, A.; Gudermann, F.; Lütkemeyer, D.; Ehrmann, A. Cell growth on electrospun nanofiber mats from polyacrylonitrile (PAN) blends. AIMS Bioeng. 2020, 7, 43–54.
  47. Storck, J.L.; Grothe, T.; Mamun, A.; Sabantina, L.; Klöcker, M.; Blachowicz, T.; Ehrmann, A. Orientation of Electrospun Magnetic Nanofibers Near Conductive Areas. Materials 2020, 13, 47.
  48. Fokin, N.; Grothe, T.; Mamun, A.; Trabelsi, M.; Klöcker, M.; Sabantina, L.; Döpke, C.; Blachowicz, T.; Hütten, A.; Ehrmann, A. Magnetic Properties of Electrospun Magnetic Nanofiber Mats after Stabilization and Carbonization. Materials 2020, 13, 1552.
  49. Mamun, A. Review of possible applications of nanofibrous mats for wound dressings. Tekstilec 2019, 62, 89–100.
  50. Sheldon, R.A. The greening of solvents: Towards sustainable organic synthesis. Curr. Opin. Green Sustain. Chem. 2019, 18, 13–19.
  51. Blachowicz, T.; Domino, K.; Koruszowic, M.; Grzybowski, J.; Böhm, T.; Ehrmann, A. Statistical Analysis of Nanofiber Mat AFM Images by Gray-Scale-Resolved Hurst Exponent Distributions. Appl. Sci. 2021, 11, 2436.
  52. Hellert, C.; Wortmann, M.; Frese, N.; Grötsch, G.; Cornelißen, C.; Ehrmann, A. Adhesion of Electrospun Poly(acrylonitrile) Nanofibers on Conductive and Isolating Foil Substrates. Coatings 2021, 11, 249.
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license; additional terms may apply. By using this site, you agree to the Terms and Conditions and Privacy Policy.
Upload a video for this entry
Information
Subjects: Polymer Science
Contributors MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register :
Lilia Sabantina
,
Tomasz BLACHOWICZ
View Times: 715
Revisions: 2 times (View History)
Update Date: 07 May 2021
Table of Contents
    1000/1000
    Hot Most Recent
    ScholarVision Creations
    Feedback