Your browser does not fully support modern features. Please upgrade for a smoother experience.
Submitted Successfully!
Thank you for your contribution! You can also upload a video entry or images related to this topic. For video creation, please contact our Academic Video Service.
Version Summary Created by Modification Content Size Created at Operation
1 Hassaan Ahmad Butt -- 2296 2026-10-23 16:52:40 |
2 format correct Catherine Yang -1633 word(s) 663 2026-10-26 06:16:25 |

Video Upload Options

We provide professional Academic Video Service to translate complex research into visually appealing presentations. Would you like to try it?
No, upload directly Yes
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Butt, H.A. Carbon Nanotube/Polymer Nanocomposites. Encyclopedia. Available online: https://encyclopedia.pub/entry/61383 (accessed on 09 November 2026).
Butt HA. Carbon Nanotube/Polymer Nanocomposites. Encyclopedia. Available at: https://encyclopedia.pub/entry/61383. Accessed November 09, 2026.
Butt, Hassaan Ahmad. "Carbon Nanotube/Polymer Nanocomposites" Encyclopedia, https://encyclopedia.pub/entry/61383 (accessed November 09, 2026).
Butt, H.A. (2026, October 23). Carbon Nanotube/Polymer Nanocomposites. In Encyclopedia. https://encyclopedia.pub/entry/61383
Butt, Hassaan Ahmad. "Carbon Nanotube/Polymer Nanocomposites." Encyclopedia. Web. 23 October, 2026.

Carbon Nanotube/Polymer Nanocomposites

Edit

Carbon nanotubes  can be combined with polymer matrices to produce nanocomposites with higher performance metrics, as well as new multifunctional properties that the original polymer did not display. This entry aims to act as a brief introduction to the factors and concepts of importance for carbon nanotube/polymer nanocomposites.

carbon nanotubes polymer nanocomposites

Carbon nanotubes (CNTs) are well known for their physio-mechanical properties at the individual level [1][2]. However, they are produced industrially in forms which often do not allow direct structural applications [3][4]. Polymeric materials are one of the most commonly used structural and structural support materials but lack long term physio-mechanical properties in themselves [5]. Combining the two allows the development of multifunctional properties in polymer matrices (mechanical improvement, electrical conductivity, piezoresistive response, etc.) and the usage of CNTs in industrial and structural environments [6][7][8].

CNTs were first explored as a homogeneously dispersed mechanical reinforcement in both thermoset and thermoplastic polymer matrices [9]. Early works showed that the addition improved mechanical performance, and analysis indicated that factors such as CNT type [10], aspect ratio [11], concentration [12] and dispersion degree [13] influenced final nanocomposite performance. As integration route development progressed, alignment of the CNT [14], compounding with secondary reinforcement phases [15][16], the scale of the CNTs themselves (powders, macrostructures) [17] and the presence of magneto-electrical fields [18] also showed influence on final performance parameters.

From the polymer matrix point of view, viscosity [19][20], processability [21], integration route [22] and the presence of chemical compounds [23] were identified as factors of influence. Lower viscosity polymers, typically thermoset in nature, allowed better homogeneous dispersion with simpler techniques (mechanical mixing, ultrasonication) [24]. High shear mixing of such polymers, using techniques such as homogenization and three-roll milling, result in better degrees of dispersion. Higher viscosity polymers typically required more energy intensive techniques centering around shear force (such as single- and twin-screw extrusion) to create similar homogeneously dispersed CNT/polymer nanocomposites [25].

A higher degree of dispersion is generally considered to be better, as it allows the minimum amount of CNT addition required to create a percolation network [26]. Higher dispersion degree also alleviates issues caused by bundling and agglomeration of the CNTs, usually cited as being stress concentration and inhomogeneity of properties [27]. The formation of the network in such composites is necessary since it builds the electrically and thermally conductive bridges within the volume of the nanocomposite from one end to another [28]. Simultaneously, the better the dispersion allows the CNTs to occupy a maximized volume, which negatively influences to inherent failure mechanisms of the matrix and reinforcement the material though inhibition of crack propagation, crack bridging and energy consumption through the failure of the CNTs themselves [29].

The percolation network is considered to consist of two main types of connections between the CNTs in homogeneously dispersed polymer nanocomposites. Ohmic connections are considered to be physical connections where the CNTs are “touching” and direct charge carrier transfer may take place [30]. Tunneling connections are those where the transfer of these charge carriers through a thin layer of polymer present between the CNTs may take place [31]. Tunneling phenomenon are affected by the electrical properties of the polymer and typical distances are reported to be below a few micrometers [32][33]. Electrical conductivity of the nanocomposite may be achieved over a critical concentration where this network becomes stable and well developed (known and the critical percolation threshold) throughout the volume [34].

Chemical or physical stimuli which are able to change this network, either by increasing or decreasing the number of connections, though changing their ratio, or physical dimensional changes of the network, cause a change in the ability to carry electric change [35][36]. This property is known as piezoresistive response, and often follows a linear response region before exponential increases take place [37]. This response allows usage of CNT/polymer nanocomposites as sensors for various scenarios and applications, and the response to stimuli is highly dependent on the polymer matrix [38]. The development of the same network induced further multifunctionality, also dependent on the degree of dispersion; hydrophobicity [39], flame retardancy [40], thermal property changes [41], corrosion resistance augmentation [42], electromagnetic shielding [43], electrostatic dissipation [44], capacitance changes [45] and thermoelectric property development [2].

References

  1. I.V. Novikov, Y.S. Mir, I.H. Lee, J.A. Chae, E.E. Agafonova, S.I. Serebrennikova, J. Nam, A.A. Dudorov, A.M. Bunkov, Y.G. Gladush, F.S. Fedorov, S. Kim, J. Han, D.V. Krasnikov, W.K. Bae, S. Park, D.S. Kim, A.G. Nasibulin, I. Jeon, High‐Yield Aerosol CVD Synthesis of High‐Quality Single‐Walled Carbon Nanotubes via Control of Nanotube Structure, Adv Funct Materials (2026) e78302. https://doi.org/10.1002/adfm.78302.
  2. Shanshan Zhou; Xiao‐Lei Shi; Lan Li; Qian Liu; Boxuan Hu; Wenyi Chen; Chenyang Zhang; Qingfeng Liu; Zhi‐Gang Chen; Advances and Outlooks for Carbon Nanotube‐Based Thermoelectric Materials and Devices. Adv. Mater. 2025, 37, e2500947. [CrossRef]
  3. Mikhail R. Predtechenskiy; Alexander A. Khasin; Alexander E. Bezrodny; Oleg F. Bobrenok; Dmitry Yu. Dubov; Vyacheslav E. Muradyan; Vladimir O. Saik; Sergei N. Smirnov; New perspectives in SWCNT applications: Tuball SWCNTs. Part 1. Tuball by itself—All you need to know about it. Carbon Trends 2022, 8, 100175. [CrossRef]
  4. Mikhail R. Predtechenskiy; Alexander A. Khasin; Sergei N. Smirnov; Alexander E. Bezrodny; Oleg F. Bobrenok; Dmitry Yu. Dubov; Andrei G. Kosolapov; Ekaterina G. Lyamysheva; Vyacheslav E. Muradyan; Vladimir O. Saik; Vasiliy V. Shinkarev; Dmitriy S. Chebochakov; Mikhail S. Galkov; Ruslan V. Karpunin; Timofey D. Verkhovod; Dmitriy V. Yudaev; Yulia S. Myasnikova; Anastasya N. Krasulina; Mikhail K. Lazarev; New Perspectives in SWCNT Applications: Tuball SWCNTs. Part 2. New Composite Materials through Augmentation with Tuball.. Carbon Trends 2022, 8, 100176. [CrossRef]
  5. Ilya V. Novikov; Dmitry V. Krasnikov; Anton M. Vorobei; Yaroslav I. Zuev; Hassaan A. Butt; Fedor S. Fedorov; Sergey A. Gusev; Alexander A. Safonov; Eugene V. Shulga; Stepan D. Konev; Ivan V. Sergeichev; Sergey S. Zhukov; Tanja Kallio; Boris P. Gorshunov; Olga O. Parenago; Albert G. Nasibulin; Multifunctional Elastic Nanocomposites with Extremely Low Concentrations of Single-Walled Carbon Nanotubes. ACS Appl. Mater. Interfaces 2022, 14, 18866-18876. [CrossRef]
  6. Pooya Parvizi; Milad Jalilian; Karl D. Dearn; Epoxy composites reinforced with nanomaterials and fibres: Manufacturing, properties, and applications. Polym. Test. 2025, 146, 108761. [CrossRef]
  7. Hassaan A. Butt; Stepan V. Lomov; Iskander S. Akhatov; Sergey G. Abaimov; Self-diagnostic carbon nanocomposites manufactured from industrial epoxy masterbatches. Compos. Struct. 2021, 259, 113244. [CrossRef]
  8. H. A. Butt; M. Owais; A. Sulimov; D. Ostrizhiniy; S. V. Lomov; I. S. Akhatov; S. G. Abaimov; Y. A. Popov. CNT/Epoxy-Masterbatch Based Nanocomposites: Thermal and Electrical Properties; Institute of Electrical and Electronics Engineers (IEEE): Piscataway, NJ, United States, 2021; pp. 417-420. [CrossRef]
  9. Erik T Thostenson; Zhifeng Ren; Tsu-Wei Chou; Advances in the science and technology of carbon nanotubes and their composites: a review. Compos. Sci. Technol. 2001, 61, 1899-1912. [CrossRef]
  10. Mostafa Elaskalany; Kamran Behdinan; Effect of carbon nanotube type and length on the electrical conductivity of carbon nanotube polymer nanocomposites. Mater. Res. Express 2023, 10, 105010. [CrossRef]
  11. Itziar Otaegi; Nora Aranburu; Maider Iturrondobeitia; Julen Ibarretxe; Gonzalo Guerrica-Echevarría; The Effect of the Preparation Method and the Dispersion and Aspect Ratio of CNTs on the Mechanical and Electrical Properties of Bio-Based Polyamide-4,10/CNT Nanocomposites. Polymers 2019, 11, 2059. [CrossRef]
  12. Hassaan A. Butt; Ilya V. Novikov; Dmitry V. Krasnikov; Artem V. Sulimov; Amit K. Pal; Stanislav A. Evlashin; Anton M. Vorobei; Yaroslav I. Zuev; Dmitry Ostrizhiniy; Dmitry Dzhurinskiy; Yuri A. Popov; Olga O. Parenago; Albert G. Nasibulin; Binder-free, pre-consolidated single-walled carbon nanotubes for manufacturing thermoset nanocomposites. Carbon 2022, 202, 450-463. [CrossRef]
  13. C.A. Martin; J.K.W. Sandler; M.S.P. Shaffer; M.-K. Schwarz; W. Bauhofer; K. Schulte; A.H. Windle; Formation of percolating networks in multi-wall carbon-nanotube–epoxy composites. Compos. Sci. Technol. 2004, 64, 2309-2316. [CrossRef]
  14. X Xie; Y Mai; X Zhou; Dispersion and alignment of carbon nanotubes in polymer matrix: A review. Mater. Sci. Eng. R Rep. 2005, 49, 89-112. [CrossRef]
  15. E. Bekyarova; E. T. Thostenson; A. Yu; H. Kim; J. Gao; J. Tang; H. T. Hahn; T.-W. Chou; M. E. Itkis; R. C. Haddon; Multiscale Carbon Nanotube−Carbon Fiber Reinforcement for Advanced Epoxy Composites. Langmuir 2007, 23, 3970-3974. [CrossRef]
  16. Amit Das; Gaurav R. Kasaliwal; René Jurk; Regine Boldt; Dieter Fischer; Klaus Werner Stöckelhuber; Gert Heinrich; Rubber composites based on graphene nanoplatelets, expanded graphite, carbon nanotubes and their combination: A comparative study. Compos. Sci. Technol. 2012, 72, 1961-1967. [CrossRef]
  17. Inpil Kang; Yun Yeo Heung; Jay H. Kim; Jong Won Lee; Ramanand Gollapudi; Srinivas Subramaniam; Suhasini Narasimhadevara; Douglas Hurd; Goutham R. Kirikera; Vesselin Shanov; Mark J. Schulz; Donglu Shi; Jim Boerio; Shankar Mall; Marina Ruggles-Wren; Introduction to carbon nanotube and nanofiber smart materials. Compos. Part B Eng. 2006, 37, 382-394. [CrossRef]
  18. E. Ivanov; R. Kotsilkova; E. Krusteva; E. Logakis; A. Kyritsis; P. Pissis; C. Silvestre; D. Duraccio; M. Pezzuto; Effects of processing conditions on rheological, thermal, and electrical properties of multiwall carbon nanotube/epoxy resin composites. J. Polym. Sci. Part B Polym. Phys. 2011, 49, 431-442. [CrossRef]
  19. Florian Jakubka; Stefan P. Schießl; Sebastian Martin; Jan M. Englert; Frank Hauke; Andreas Hirsch; Jana Zaumseil; Effect of Polymer Molecular Weight and Solution Parameters on Selective Dispersion of Single-Walled Carbon Nanotubes. ACS Macro Lett. 2012, 1, 815-819. [CrossRef]
  20. Gaurav R. Kasaliwal; Andreas Göldel; Petra Pötschke; Gert Heinrich; Influences of polymer matrix melt viscosity and molecular weight on MWCNT agglomerate dispersion. Polymer 2011, 52, 1027-1036. [CrossRef]
  21. Robert Socher; Beate Krause; Michael T. Müller; Regine Boldt; Petra Pötschke; The influence of matrix viscosity on MWCNT dispersion and electrical properties in different thermoplastic nanocomposites. Polymer 2012, 53, 495-504. [CrossRef]
  22. Amit K. Chakraborty; Tiia Plyhm; Michel Barbezat; Adly Necola; Giovanni P. Terrasi; Carbon nanotube (CNT)–epoxy nanocomposites: a systematic investigation of CNT dispersion. J. Nanoparticle Res. 2011, 13, 6493-6506. [CrossRef]
  23. Yan Yan Huang; Eugene M. Terentjev; Dispersion of Carbon Nanotubes: Mixing, Sonication, Stabilization, and Composite Properties. Polymers 2012, 4, 275-295. [CrossRef]
  24. Ewelina Ciecierska; Anna Boczkowska; Krzysztof J. Kurzydłowski; Characterization of Polymer Based Nanocomposites with Carbon Nanotubes. J. Nanosci. Nanotechnol. 2014, 14, 2690-2699. [CrossRef]
  25. Ermias Wubete Fenta; Berihun Abebaw Mebratie; Advancements in carbon nanotube-polymer composites: Enhancing properties and applications through advanced manufacturing techniques. Heliyon 2024, 10, e36490. [CrossRef]
  26. Ilya V. Novikov; Dmitry V. Krasnikov; Anton M. Vorobei; Yaroslav I. Zuev; Hassaan A. Butt; Fedor S. Fedorov; Sergey A. Gusev; Alexander A. Safonov; Eugene V. Shulga; Stepan D. Konev; Ivan V. Sergeichev; Sergey S. Zhukov; Tanja Kallio; Boris P. Gorshunov; Olga O. Parenago; Albert G. Nasibulin; Multifunctional Elastic Nanocomposites with Extremely Low Concentrations of Single-Walled Carbon Nanotubes. ACS Appl. Mater. Interfaces 2022, 14, 18866-18876. [CrossRef]
  27. A. Bhuiyan; Raghuram V. Pucha; Kyriaki Kalaitzidou; 3D RVE Models Able to Capture and Quantify the Dispersion, Agglomeration, and Orientation State of CNT in CNT/PP Nanocomposites. Front. Mater. 2016, 3, 2. [CrossRef]
  28. David S. McLachlan; Cosmas Chiteme; Cheol Park; Kristopher E. Wise; Sharon E. Lowther; Peter T. Lillehei; Emilie J. Siochi; Joycelyn S. Harrison; AC and DC percolative conductivity of single wall carbon nanotube polymer composites. J. Polym. Sci. Part B Polym. Phys. 2005, 43, 3273-3287. [CrossRef]
  29. Conrad S. Lovell; Kristopher E. Wise; Jae-Woo Kim; Peter T. Lillehei; Joycelyn S. Harrison; Cheol Park; Thermodynamic approach to enhanced dispersion and physical properties in a carbon nanotube/polypeptide nanocomposite. Polymer 2009, 50, 1925-1932. [CrossRef]
  30. Nikita E. Gordeev; Hassaan A. Butt; Svetlana I. Serebrennikova; Sergey P. Shadrov; Vladislav A. Kondrashov; Xinxin Feng; Zeyu Wang; Junlei Qi; Yaotian Yan; Dmitry V. Krasnikov; Albert G. Nasibulin; Temperature-dependent resistivity in multiscale tri-phase hierarchical carbon nanocomposites. Carbon 2026, 259, 121868. [CrossRef]
  31. Ning Hu; Yoshifumi Karube; Cheng Yan; Zen Masuda; Hisao Fukunaga; Tunneling effect in a polymer/carbon nanotube nanocomposite strain sensor. Acta Mater. 2008, 56, 2929-2936. [CrossRef]
  32. Chunyu Li; Erik T. Thostenson; Tsu-Wei Chou; Dominant role of tunneling resistance in the electrical conductivity of carbon nanotube–based composites. Appl. Phys. Lett. 2007, 91, 223114. [CrossRef]
  33. Xinxin Sun; Mo Song; Highly Conductive Carbon Nanotube/Polymer Nanocomposites Achievable?. Macromol. Theory Simul. 2009, 18, 155-161. [CrossRef]
  34. Alessandro Pontefisso; Michele Zappalorto; Percolation in Carbon Nanotube-Reinforced Polymers for Strain-Sensing Applications: Computational Investigation on Carbon Nanotube Distribution, Curvature, and Aggregation. Materials 2023, 16, 4959. [CrossRef]
  35. Alamusi; Ning Hu; Hisao Fukunaga; Satoshi Atobe; Yaolu Liu; Jinhua Li; Piezoresistive Strain Sensors Made from Carbon Nanotubes Based Polymer Nanocomposites. Sensors 2011, 11, 10691-10723. [CrossRef]
  36. M. Haghgoo; M.K. Hassanzadeh-Aghdam; R. Ansari; A comprehensive evaluation of piezoresistive response and percolation behavior of multiscale polymer-based nanocomposites. Compos. Part A Appl. Sci. Manuf. 2020, 130, 105735. [CrossRef]
  37. Ying Yi; Bo Wang; Xingyue Liu; Changping Li; Flexible piezoresistive strain sensor based on CNTs–polymer composites: a brief review. Carbon Lett. 2022, 32, 713-726. [CrossRef]
  38. F. Avilés, A.I. Oliva‐Avilés, M. Cen‐Puc, Piezoresistivity, Strain, and Damage Self‐Sensing of Polymer Composites Filled with Carbon Nanostructures, Adv Eng Mater 20 (2018) 1701159. https://doi.org/10.1002/adem.201701159.
  39. Arya Uthaman; Hiran Mayookh Lal; Chenggao Li; Guijun Xian; Sabu Thomas; Mechanical and Water Uptake Properties of Epoxy Nanocomposites with Surfactant-Modified Functionalized Multiwalled Carbon Nanotubes. Nanomaterials 2021, 11, 1234. [CrossRef]
  40. Bo‐Wen Liu; Hai‐Bo Zhao; Yu‐Zhong Wang; Advanced Flame‐Retardant Methods for Polymeric Materials. Adv. Mater. 2021, 34, 2107905. [CrossRef]
  41. Alexandr V. Shchegolkov; Aleksei V. Shchegolkov; Vladimir V. Kaminskii; Pablo Iturralde; Maxim A. Chumak; Advances in Electrically and Thermally Conductive Functional Nanocomposites Based on Carbon Nanotubes. Polymers 2024, 17, 71. [CrossRef]
  42. Mengke Liu; Xiaobin Liu; Shiqiang Wang; Bin Tao; Yingjie Zhang; Xiaolei Bi; A Review on High‐Performance Conductive Anti‐Corrosion Coatings: From Material Innovations to Practical Implementation. J. Appl. Polym. Sci. 2025, 143, 58153. [CrossRef]
  43. Nannan Wu; Qian Hu; Renbo Wei; Xianmin Mai; Nithesh Naik; Duo Pan; Zhanhu Guo; Zhengjun Shi; Review on the electromagnetic interference shielding properties of carbon based materials and their novel composites: Recent progress, challenges and prospects. Carbon 2021, 176, 88-105. [CrossRef]
  44. Ramdayal Yadav; Manoj Tirumali; Xungai Wang; Minoo Naebe; Balasubramanian Kandasubramanian; Polymer composite for antistatic application in aerospace. Def. Technol. 2020, 16, 107-118. [CrossRef]
  45. Hao Zhang; Gaoping Cao; Yusheng Yang; Carbon nanotube arrays and their composites for electrochemical capacitors and lithium-ion batteries. Energy Environ. Sci. 2009, 2, 932-943. [CrossRef]
More
©Text is available under the terms and conditions of the Creative Commons-Attribution ShareAlike (CC BY-SA) license; additional terms may apply. By using this site, you agree to the Terms and Conditions and Privacy Policy.
Upload a video for this entry
Information
Subjects: Materials Science, Composites; Nanoscience & Nanotechnology
Contributor MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register : Hassaan Ahmad Butt
View Times: 13
Entry Collection: Polymer Concepts
Revisions: 2 times (View History)
Update Date: 26 Oct 2026
Table of Contents
    Notice
    You are not a member of the advisory board for this topic. If you want to update advisory board member profile, please contact office@encyclopedia.pub.
    OK
    Confirm
    Only members of the Encyclopedia advisory board for this topic are allowed to note entries. Would you like to become an advisory board member of the Encyclopedia?
    Yes
    No
    ${ textCharacter }/${ maxCharacter }
    Submit
    Cancel
    There is no comment~
    ${ textCharacter }/${ maxCharacter }
    Submit
    Cancel
    ${ selectedItem.replyTextCharacter }/${ selectedItem.replyMaxCharacter }
    Submit
    Cancel
    Confirm
    Are you sure to Delete?
    Yes No
    Write an Entry
    Feedback