| Version | Summary | Created by | Modification | Content Size | Created at | Operation |
|---|---|---|---|---|---|---|
| 1 | Jack Zhong | -- | 191 | 2026-10-21 09:35:24 | | | |
| 2 | Jack Zhong | -9 word(s) | 182 | 2026-10-21 09:37:38 | | |
Polymerization-Induced Self-Assembly is a dispersion polymerisation in which the growing chain turns insoluble at a critical length and assembles into a particle while it grows. The process gives a block copolymer particle at a high solids content, because the monomer itself is the solvent of the first block. A reversible-deactivation radical route keeps the chain growing, and the assembly can be run in water or in an alcohol [1]. The morphology moves from a sphere to a worm and then to a vesicle as the stabiliser block shortens, and that sequence is now predictable enough to serve as a design tool [2]. A crystallisation-driven variant nucleates the assembly on a crystalline core, and the rod that forms is longer and more uniform than the sphere [3]. A photocontrolled route starts and stops the polymerisation with light, so the assembly can be frozen at an intermediate state [4]. When the same chemistry is compared with a miniemulsion, the nucleation route decides whether a particle or a monomer droplet is the site of the assembly [5].