Submitted Successfully!
To reward your contribution, here is a gift for you: A free trial for our video production service.
Thank you for your contribution! You can also upload a video entry or images related to this topic.
Version Summary Created by Modification Content Size Created at Operation
1
Svetlana Shekhovtsova
 -- 1400 2023-12-14 09:30:15 |
2 layout
Camila Xu
 Meta information modification 1400 2023-12-15 02:17:01 |

Video Upload Options

Do you have a full video?
Send video materials Upload full video

Confirm

Are you sure to Delete?
Yes No
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Obukhova, S.Y.; Korolev, E.V.; Gladkikh, V.A. Aging Performance of Polymer-Modified Binders. Encyclopedia. Available online: https://encyclopedia.pub/entry/52737 (accessed on 02 May 2024).
Obukhova SY, Korolev EV, Gladkikh VA. Aging Performance of Polymer-Modified Binders. Encyclopedia. Available at: https://encyclopedia.pub/entry/52737. Accessed May 02, 2024.
Obukhova, Svetlana Yuryevna, Evgeniy Valerievich Korolev, Vitaliy Aleksandrovich Gladkikh. "Aging Performance of Polymer-Modified Binders" Encyclopedia, https://encyclopedia.pub/entry/52737 (accessed May 02, 2024).
Obukhova, S.Y., Korolev, E.V., & Gladkikh, V.A. (2023, December 14). Aging Performance of Polymer-Modified Binders. In Encyclopedia. https://encyclopedia.pub/entry/52737
Obukhova, Svetlana Yuryevna, et al. "Aging Performance of Polymer-Modified Binders." Encyclopedia. Web. 14 December, 2023.
Aging Performance of Polymer-Modified Binders
Edit
This entry is adapted from the peer-reviewed paper 10.3390/ma16247534

The term “aging of polymer-modified binder”, as well as the term “bitumen aging” in a generalized form, combines the whole set of reversible and irreversible changes in its chemical composition, physical transformations, and changes in structural and mechanical properties occurring during the production of polymer-modified binders, its storage/transportation, technological processing, and operation, i.e., during the entire lifecycle of the polymer-modified binder. Polymer-modified binders are complex multicomponent systems in which polymer and other additives, if available, make a significant contribution to the aging process.

single-walled carbon nanotubes polymer-modified binder aging performance grade

1. Introduction

At present, a widely used group of materials in road construction is polymer–bitumen compositions, also known as polymer-modified binders (PMB) [1][2][3]. In general, it is a composition consisting of a rationally selected ratio of petroleum bitumen, styrene–butadiene–styrene polymer, and plasticizer, if necessary. Depending on the specified requirements for polymer-modified binders, they may contain surfactants, antioxidants, and nano- and micro-dimensional additives [4][5][6][7]. All these substances are aimed at improving the quality of the polymer-modified binder. But at the same time, they significantly complicate the system, making it less stable and, as a result, more susceptible to the processes of delamination and aging [8].

2. The Aging Process in Bitumen

The term “bitumen aging” in a generalized form combines the whole set of reversible and irreversible changes in its chemical composition, physical transformations, and changes in structural and mechanical parameters. These changes occur during the production of bitumen, its storage, transportation, technological processing, and operation, i.e., during the entire lifecycle of the bitumen binder. In modern studies, it is customary to separate short-term and long-term aging. The short-term aging process of bitumen takes place in a thin film of bitumen at high temperatures (150–200 °C). This short-term aging occurs when bitumen is connected to mineral material. Long-term or operational aging occurs at lower temperatures (less than 80 °C) but for a longer time during the operation of asphalt–concrete pavement. The short-term and long-term aging processes have different characteristics and differ in the rate of flow.
In the process of the short-term aging of bitumen, its group composition changes [9]. The number of oil fractions decreases, and the number of resinous–asphaltene fractions increases. These transformations occur because of oxidative reactions and the polymerization of light fractions, including their partial evaporation. It is possible to describe the ongoing processes in more detail using Semenov’s theory of chain reactions [10]. In the initial period of the short-term aging of bitumen, because of the interaction of hydrocarbons and oxygen in the air, peroxide and hyperoxide compounds are formed. These compounds are unstable, so they break down into free radicals. These trigger new chains of oxidative reactions. In the process of oxidative reactions, oxygen molecules are absorbed (embedded in chains), which leads to the destruction of high-molecular hydrocarbons (asphalt–resinous complexes). The oxidation reaction proceeds until the asphalt–resinous complexes turn into unsaturated chemical compounds, which are further polymerized, i.e., compacted, forming high-carbon compounds. Many studies [11][12][13][14] have reported that the short-term aging of bitumen leads to a natural change in its structure and properties. Viscosity, heat resistance, stiffness, and elasticity increase, but at the same time, there is a decrease in plasticity, which leads to an increase in fragility.
In the long-term aging of bitumen, in addition to chemical processes (oxidation) at low operating temperatures, physical processes also flow. These physical processes also change properties. These physical processes are associated with the formation of equilibrium supramolecular structures, leading to the hardening (solidification) of bitumen. There are several different theoretical descriptions of this process. Traxler and Coombs [15] reported that the physical aging of bitumen is associated with the manifestation of colloidal properties, i.e., the transition of bitumen from a sol structure to a gel structure. Gussfeldt [16] reported that the physical aging of bitumen during operation is associated with a change in the state of peptization of asphaltenes by maltenes. After that, a new adsorption equilibrium is established between the polar components of bitumen. The paraffin included in the bitumen crystallizes and, therefore, affects the hardening processes. In the process of spreading (remelting) bitumen, all these processes become reversible, but in the conditions of the operation process, these processes are irreversible.

3. The Aging Process in Polymer-Modified Binders

The term “aging of polymer-modified binder”, as well as the term “bitumen aging” in a generalized form, combines the whole set of reversible and irreversible changes in its chemical composition, physical transformations, and changes in structural and mechanical properties occurring during the production of polymer-modified binders, its storage/transportation, technological processing, and operation, i.e., during the entire lifecycle of the polymer-modified binder. Polymer-modified binders are complex multicomponent systems in which polymer and other additives, if available, make a significant contribution to the aging process. Therefore, despite numerous studies, at present, there is no reliable mechanism for the aging of polymer-modified binders. Due to the different nature and chemical properties of polymers, complex mechanisms of interaction occur between bitumen with polymers and modified bitumen with mineral aggregate [17]. It is worth noting that there are many studies focused on the study of aging on the structure and properties of polymer-modified binders [18][19][20][21][22][23][24][25][26][27][28][29].
Rheological methods are widely used to establish the thermal properties of polymer-modified binders [21][22]. Fourier transform infrared (FTIR) spectroscopy is also widely used to determine the polymer content in the modified binder and the effect of the thermo-oxidative aging process on the bitumen and SBS copolymers [23][24][25][26]. Fluorescence microscopy (FM) is used to assess the degree of dispersion of polymer, as well as its effect on the aging processes and morpho-structural features of the modified binder [27][28][29]. Therefore, the authors in [18] studied the elemental composition of polymer-modified binders (with several varieties of polymer) aged by the RTFOT method. They found that the content of the carbon component increased in all the aged samples studied, but the authors reported that they received mixed results in the presence of hydrogen, sulfur, and nitrogen. No clear trends were found for carbon, hydrogen, nitrogen, and sulfur due to polymer modification. Therefore, the authors also concluded that the aging process of polymer-modified binders largely depends on the type and level of modification [20]. The researchers in [19] found that there is not enough polymer in bitumen to form a strong polymer mesh, so it is necessary to introduce additional crosslinking additives. It was also established that an excess of polymer and crosslinking additives will not always improve the properties and resistance of modified bitumen to short-term aging.
Currently, the use of nanoscale modifiers (carbon nanomaterials) as a structuring component for polymer-modified binders is widespread [5][7][30]. Carbon nanotubes (CNTS), fullerenes, and graphene are most often used to modify polymer–bitumen composites [5][31][32]. The aspect ratio of the length to the diameter of the carbon nanotube can be unusually high, in the order of 1·107:1 or more. This ratio is the reason that all the properties of carbon nanotubes are extremely anisotropic (i.e., they depend on direction) and can be varied directionally, and is of great interest since it opens the possibility of directional formation of the structure of the material [33][34][35][36]. They are also used because they have unique physical and mechanical characteristics for the directional structure formation of building composites. Their use makes it possible to significantly increase the strength and structural stability of modified binders [5], but despite all the advantages of using carbon nanomaterials, they are characterized by a feature that prevents industrial application, namely that despite the achievement of the nanoscale parameter of carbon nanotubes and distribution uniformity in the binder, they tend to aggregate over time. This feature minimizes the initial effect of nano-modification. Therefore, studying the influence of carbon nanotubes on the aging of polymer-modified binders is an urgent task, especially in terms of the effect of the long-term aging of polymer-modified binders.
The aging process of polymer-nanomodified binders is complicated by the presence of SBS polymer and carbon nanotubes. When the bitumen is joined with the SBS polymer, its elastomeric phase swells due to the absorption of the maltenes fractions (oil fractions) [37][38][39], which results in two phases: a bitumen matrix (bitumen phase) and a polymer phase. Earlier, the authors of [5], using electron microscopy to study asphalt–resin complexes with nanotubes, installed the physical barrier effect, which is conducted as follows: the introduction of carbon nanotubes into bitumen leads to an increase in the dispersion of asphalt–resin complexes, resulting in the formation of structural elements (physical barriers) that prevent the coagulation of asphalt–resin complexes. 

References

  1. Loos, M. Carbon Nanotube Reinforced Composites: CNT Polymer Science and Technology; William Andrew: Norwich, NY, USA, 2014; p. 304.
  2. Chen, J.S.; Wang, T.J.; Lee, C.T. Evaluation of a highly modified asphalt binder for field performance. Constr. Build. Mater. 2018, 171, 539–545.
  3. Mandal, T.; Sylla, R.; Bahia, H.U.; Barmand, S. Effectof cross-linking agents on the rheological properties of polymer-modified bitumen. Road Mater. Pavement Des. 2014, 16, 349–361.
  4. Hernando, D.; Couscheir, K.; Jacobs, G.; Almalehy, H.; Omranian, S.R.; Vuye, C.; Braspenninckx, J.; Van den Bergh, W. A comparative study on the performance of field-sampled asphalt mixtures for heavy-duty pavements using laboratory testing and mechanistic-empirical simulations. Road Mater. Pavement Des. 2023, 24, 554–573.
  5. Shekhovtsova, S.Y.; Korolev, E.V. Formation of polymer modified binder structure in the presence of carbon nanomaterials. Constr. Build. Mater. 2021, 303, 124591.
  6. Ishaq, M.A.; Giustozzi, F. Effect of polymers and micro fibres on the thermo-chemical and rheological properties of polymer modified binders. Aust. J. Civ. Eng. 2023, 21, 34–49.
  7. Burkov, M.V.; Eremin, A.V. Mechanical properties of carbon-fiber-reinforced epoxy composites modified by carbon micro- and nanofillers. Polym. Compos. 2021, 42, 4265–4276.
  8. Arifuzzaman, M. Polymer nanocomposites for road construction: Investigating the aging performance of polymer and carbon nanotube–modified asphalt binder. In Advanced Polymer Nanocomposites; Woodhead Publishing: Thorston, UK, 2022; pp. 319–334.
  9. Hofko, B.; Eberhardsteiner, L.; Fussl, J.; Grothe, H. Impact of maltene and asphaltene fraction on mechanical behavior and microstructure of bitumen. Mater. Struct. 2016, 49, 829–841.
  10. Semenov, N.N. Chemical Kinetics and Chain Reactions; Clarendon Press: Oxford, UK, 1935.
  11. Eberhardsteiner, L.; Fussl, J.; Hofko, B.; Handle, F.; Hospodka, M.; Blab, R.; Grothe, H. Influence of asphaltene content on mechanical bitumen behavior: Experimental investigation and micromechanical modeling. Mater. Struct. 2015, 48, 3099–3112.
  12. Handle, F.; Fussl, J.; Neudl, S.; Grossegger, D.; Eberhardsteiner, L.; Hofko, B.; Grothe, H. The bitumen microstructure: A fluorescent approach. Mater. Struct. 2016, 49, 167–180.
  13. Xu, X.; Haoyan, G.; Xiaofeng, W.; Mingxiang, Z.; Zhenjun, W.; Bo, Y. Physical properties and anti-aging characteristics of asphalt modified with nano-zinc oxide powder. Constr. Build. Mater. 2019, 224, 732–742.
  14. Liu, J.; Wang, Z.; Luo, R.; Bian, G.; Liang, Q.; Yan, F. Changes of components and rheological properties of bitumen under dynamic thermal aging. Constr. Build. Mater. 2021, 303, 124501.
  15. Traxler, R.N.; Coombs, C.E. The Colloidal Nature of Asphalt as Shown by its Flow Properties. J. Phys. Chem. 1936, 40, 1133–1147.
  16. Gusfeldt, K.H.; Scott, J. Factors governing adhesion in bituminous mixes. Dtsch. Shell AG 1975, 1, 49–65.
  17. Liu, H.; Hao, P.; Wang, H.; Adhikari, S. Effects of Physio-Chemical Factors on Asphalt Aging Behavior. J. Mater. Civ. Eng. 2014, 26, 190–197.
  18. Diab, A.; Enieb, M.; Singh, D. Influence of aging on properties of polymer-modified asphalt. Constr. Build. Mater. 2019, 196, 54–65.
  19. Tang, N.; Huang, W.; Hao, G. Effect of aging on morphology, rheology, and chemical properties of highly polymer modified asphalt binders. Constr. Build. Mater. 2021, 281, 122595.
  20. Joohari, J.B.; Maniam, S.; Giustozzi, F. Effect of Long-Term Aging on Polymer Degradation and Fatigue Resistance of Hybrid Polymer-Modified Bitumen. J. Mater. Civ. Eng. 2022, 34, 04022286.
  21. Xu, S.; Fan, Y.; Feng, Z.; Ke, Y.; Zhang, C.; Huang, H. Comparison of quantitative determination for SBS content in SBS modified asphalt. Constr. Build. Mater. 2021, 282, 122733.
  22. Zhu, J.; Birgisson, B.; Kringos, N. Polymer modification of bitumen: Advances and challenges. Eur. Polym. J. 2014, 54, 18–38.
  23. Ragni, D.; Ferrotti, G.; Lu, X.; Canestrari, F. Effect of temperature and chemical additives on the short-term ageing of polymer modified bitumen for WMA. Mater. Des. 2018, 160, 514–526.
  24. Mirwald, J.; Werkovits, S.; Camargo, I.; Maschauer, D.; Hofko, B.; Grothe, H. Investigating bitumen long-term-ageing in the laboratory by spectroscopic analysis of the SARA fractions. Constr. Build. Mater. 2020, 258, 119577.
  25. Lyne, Å.L.; Wallqvist, V.; Birgisson, B. Adhesive surface characteristics of bitumen binders investigated by Atomic Force Microscopy. Fuel 2013, 113, 248–256.
  26. Chen, Z.; Zhang, H.; Liu, X.; Duan, H. A novel method for determining the time-temperature superposition relationship of SBS modified bitumen: Effects of bitumen source, modifier type and aging. Constr. Build. Mater. 2021, 280, 122549.
  27. Xu, J.; Zhang, A.; Zhou, T.; Cao, X.; Xie, Z. A study on thermal oxidation mechanism of styrene–butadiene–styrene block copolymer (SBS). Polym. Degrad. Stab. 2007, 92, 1682–1691.
  28. Wei, H.; Bai, X.; Qian, G.; Wang, F.; Li, Z.; Jin, J.; Zhang, Y. Aging Mechanism and Properties of SBS Modified Bitumen under Complex Environmental Conditions. Materials 2019, 12, 1189.
  29. Desidery, L.; Lanotte, M. Identification of undisclosed modifiers and their effects on chemical, thermal, and microstructural properties of unaged and aged industrial high polymer-modified asphalt binders. Constr. Build. Mater. 2023, 389, 131763.
  30. Shekhovtsova, S.Y.; Korolev, E.V. Nanomodified rejuvenators and protective materials for asphalt concrete. Mag. Civ. Eng. 2021, 106, 10607.
  31. Yang, S.; Bieliatynskyi, A.; Trachevskyi, V.; Shao, M.; Ta, M. Technology for improving modern polymer composite materials. Mater. Sci.-Pol. 2022, 40, 27–41.
  32. Nazki, M.A.; Chopra, T.; Chandrappa, A.K. Rheological properties and thermal conductivity of bitumen binders modified with graphene. Constr. Build. Mater. 2020, 238, 117693.
  33. Strozzi, M.; Smirnov, V.V.; Pellicano, F.; Kovaleva, M. Nonlocal anisotropic elastic shell model for vibrations of double-walled carbon nanotubes under nonlinear van der Waals interaction forces. Int. J. Non-Linear Mech. 2022, 146, 104172.
  34. Ghavanloo, E.; Fazelzadeh, S.A. Vibration characteristics of single-walled carbon nanotubes based on an anisotropic elastic shell model including chirality effect. Appl. Math. Model. 2012, 36, 4988–5000.
  35. Strozzi, M.; Elishakoff, I.E.; Bochicchio, M.; Cocconcelli, M.; Rubini, R.; Radi, E. A Comparison of Shell Theories for Vibration Analysis of Single-Walled Carbon Nanotubes Based on an Anisotropic Elastic Shell Model. Nanomaterials 2023, 13, 1390.
  36. Fazelzadeh, S.A.; Ghavanloo, E. Nonlocal anisotropic elastic shell model for vibrations of single-walled carbon nanotubes with arbitrary chirality. Compos. Struct. 2012, 94, 1016–1022.
  37. Wen, G.; Zhang, Y.; Zhang, Y.; Sun, K.; Fan, Y. Rheological characterization of storage-stable SBS-modified asphalts. Polym. Test. 2002, 21, 295–302.
  38. Zhang, F.; Yu, J.; Han, J. Effects of thermal oxidative ageing on dynamic viscosity, TG/DTG, DTA and FTIR of SBS- and SBS/sulfur-modified asphalts. Constr. Build. Mater. 2011, 25, 129–137.
  39. Sandberg, U. Low noise road surfaces—State-of-the-art review. J. Acoust. Soc. Jpn. E 1999, 20, 1–17.
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license; additional terms may apply. By using this site, you agree to the Terms and Conditions and Privacy Policy.
Upload a video for this entry
Information
Subjects: Polymer Science
Contributors MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register :
Svetlana Yuryevna Obukhova
,
Evgeniy Valerievich Korolev
,
Vitaliy Aleksandrovich Gladkikh
View Times: 110
Revisions: 2 times (View History)
Update Date: 15 Dec 2023
Table of Contents
    1000/1000
    Hot Most Recent
    Feedback