Submitted Successfully!
To reward your contribution, here is a gift for you: A free trial for our video production service.
Thank you for your contribution! You can also upload a video entry or images related to this topic.
Version Summary Created by Modification Content Size Created at Operation
1 -- 1128 2023-08-24 09:46:27 |
2 insert references Meta information modification 1128 2023-08-24 10:44:51 |

Video Upload Options

Do you have a full video?

Confirm

Are you sure to Delete?
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Khan, H.U.; Hussain, A.; Nazir, S.; Ali, F.; Khan, M.Z.; Ullah, I. Proxy Mobile IPv6 Extension for IoT Domain. Encyclopedia. Available online: https://encyclopedia.pub/entry/48414 (accessed on 30 August 2024).
Khan HU, Hussain A, Nazir S, Ali F, Khan MZ, Ullah I. Proxy Mobile IPv6 Extension for IoT Domain. Encyclopedia. Available at: https://encyclopedia.pub/entry/48414. Accessed August 30, 2024.
Khan, Habib Ullah, Anwar Hussain, Shah Nazir, Farhad Ali, Muhammad Zubair Khan, Inam Ullah. "Proxy Mobile IPv6 Extension for IoT Domain" Encyclopedia, https://encyclopedia.pub/entry/48414 (accessed August 30, 2024).
Khan, H.U., Hussain, A., Nazir, S., Ali, F., Khan, M.Z., & Ullah, I. (2023, August 24). Proxy Mobile IPv6 Extension for IoT Domain. In Encyclopedia. https://encyclopedia.pub/entry/48414
Khan, Habib Ullah, et al. "Proxy Mobile IPv6 Extension for IoT Domain." Encyclopedia. Web. 24 August, 2023.
Proxy Mobile IPv6 Extension for IoT Domain
Edit

The upcoming generation of communications can provide richer mobility, high data rate, reliable security, better quality of services, and supporting mobility requirements in the Internet of Things (IoT) environment. Integrating modern communication with IoT demands more secure, scalable, and resource-efficient mobility solutions for better business opportunities. In a massive 6G-enabled IoT environment, modern mobility solutions such as proxy mobile IPv6 (PMIPv6) have the potential to provide enhanced mobility and resource efficiency. 

Proxy Mobile IPv6 IoT networks next-generation IoT location-based PMIPv6

1. Introduction

Rapid advancements in communication technologies are creating opportunities for various application domains due to their potential for handling massive internet traffic, richer mobility, better security, and seamless mobility [1][2]. Such potential of these technologies supports the integration of next-generation 6G-enabled IoT mobility [2][3][4][5]. As a result, various domains are motivated to embrace modern communication technologies by integrating modern mobility protocols in large-scale IoT [2][6]. Examples in such domains include information access using smart devices, processing of transactions, support for modern technologies, and mobility services. Integration of such solutions in modern mobility solutions requires optimized AI-based models, adaptive decision-based algorithms, and secure communication [7].
An effective modern solution requires the integration of 6G-enabled IoT mobility management protocol such as PMIPv6 [8] in a modern IoT environment [9][10]. PMIPv6 performs its mobility using Mobile Access Gateway (MAG) and Local Mobility Anchor (LMA) [11]. However, various problems are associated with basic PMIPv6 such as the handover delay during the handover, packet loss due to the absence of buffering mechanism, support for network mobility, additional signaling, and load on certain entities due to its involvement in overall mobility [11][12].
Furthermore, among the solutions provided for solving the aforementioned issues, predictive PMIPv6 extension protocols received much attention from experts [13][14]. One of the major reasons for its adoption is the prediction of handover occurrence in advance and making necessary arrangements before such an event [1]. Such extensions may use the Mobile Node (MN), LMA, or MAG for performing such prediction [11][12]. In the context of PMIPv6 protocol, MN is a device that moves among networks in addition to maintaining its IP address. To predict the handover moment in advance, various solutions use Received Signal Strength (RSS) [15][16].

2. Proxy Mobile IPv6 Extension for IoT Domain

Modern IoT such as 6G-enabled IoT are supported by efficient network-based mobility management protocols for resource efficiency [1][13][17][18]. For adopting IoT in a modern solution, a number of associated IoT challenges, its feasibility, security issues, and architectures are analyzed for assessing the potential adaptation of IoT [19]. Experts suggest devising scalable, resource-efficient, feature-richer, and reliable solutions for improving the services’ quality in the upcoming 5G/6G communication. Furthermore, for supporting IoT, a network-based mobility protocol is devised in which the point of attachment by their respective devices is updated frequently and provides better signaling efficiency during mobility [20]. For supporting the potential domains, Ref. [20] highlights a number of functional requirements and also provided various mobility management solutions that are made on the various requirement and the modern standards of 5G/6G. To meet such functional requirements, proxy mobile IPv6 protocol extensions are one of the most feasible candidates for enhanced mobility in the IoT [21][22][23].
Network-based mobility solutions such as PMIPv6 extension protocols have received much attention by avoiding the involvement of the MNs in their processes [16]. In addition, domain experts have put much effort to address and solve the aforementioned problems associated with PMIPv6 protocols [13]. As a result, a number of fast proxy mobile IPv6 extensions were proposed that minimize handover latency as low as possible [24]. The packet-loss problem is coped with the addition of a buffering mechanism to store the packets during the handover procedure. Overall signaling of the schemes is improved by eliminating the prediction of the expected resources to which the MN could roam [11]. Among the predictive schemes, there are many schemes that use the Received Signal strength (RSS) for predicting the initiating moment for handover. This scheme includes a smart buffering scheme [25], location-aware FPMIPv6, a low latency scheme [16], and FPMIPv6 [15].
An attempt made for handover efficiency and addressing the loss of packets during handover, FPMIPv6 works by predicting the next MAG (nMAG) in advance for the MN to move [15]. In this scheme, the MN identifies the target MAG when the value of RSS becomes too low. After predicting the nMAG, MN contacts the pMAG via the L2 report. Using the L2 report or L2 trigger, the MN informs the network about changing its location in the network. After receiving the information from MN, the message including handover initiation (HI) is sent from pMAG to nMAG while nMAG replies to the HI message with a Handover acknowledgment (HAck) message. For exchanging the buffered packets, a tunnel is formed between pMAG and nMAG. Furthermore, the attachment of MN is detected by nMAG and necessary signaling is performed for communicating Proxy Binding Update (PBA) and Proxy Binding Acknowledgement (PBA) between LMA and nMAG. Finally, the buffered packets and Router Advertisement (RA) are sent to the MN.
For enhancing the handover latency, the process of authentication is optimized in an RSS-based PMIPv6 protocol [16] referred to as a low latency scheme. In such a scheme, based upon the occurrence of an RSS event, De-Reg Proxy Binding Update (De-Reg PBU) is sent to LMA from pMAG. LMA immediately starts storing packets and using the Immediate Handover Request (IHR) message, it contacts its surrounding MAGs. Upon the attachment of MN, the corresponding MAG reply to the IHR message based on MN’s information. LMA responds to the pMAG with De-Reg Proxy Binding Acknowledgment (De-Reg PBA). LMA then forwards any stored packets to nMAG to MN.
Another approach that directly addresses the packet-loss issue is the smart buffering scheme, which solves the problem by buffering packets during MN changeover. The smart buffering system operates by monitoring the RSS value and storing packets destined for MN when the value falls below a certain threshold [25]. MN handover process works by using Flush Request (FReq) and Flush Reply (FRep) messages. FReq message is communicated to the neighboring MAGs of nMAG when MN attachment is detected by target MAG. Using information of MN in the FReq message, the corresponding pMAG reply by using the FRep message. Furthermore, for solving packet loss, the buffered packets are transferred from pMAG to nMAG using the established tunnel.
A more efficient location-based PMIPv6 extension is devised that effectively uses the location information for enhancing the signaling efficiency, and load on network entities [1][13]. In such a scheme, the location of the MAG is shared with its corresponding MNs so that MN should only request for handover when its location is proper. Such a procedure eliminates unnecessary signaling and load on network resources.
For providing better mobility solutions based on the requirement of current as well as future communication, a resource-friendly and performance-efficient mobility solution is provided that can handle many devices in a massive IoT environment.

References

  1. Hussain, A.; Nazir, S.; Khan, F.; Nkenyereye, L.; Ullah, A.; Khan, S.; Verma, S. A Resource Efficient hybrid Proxy Mobile IPv6 extension for Next Generation IoT Networks. IEEE Internet Things J. 2021, 10, 2095–2103.
  2. Wang, Q.; Zhu, X.; Ni, Y.; Gu, L.; Zhu, H. Blockchain for the IoT and industrial IoT: A review. Internet Things 2020, 10, 100081.
  3. Salahdine, F.; Han, T.; Zhang, N.J.S. Security in 5G and beyond recent advances and future challenges. Secur. Priv. 2023, 6, e271.
  4. Varga, P.; Peto, J.; Franko, A.; Balla, D.; Haja, D.; Janky, F.; Soos, G.; Ficzere, D.; Maliosz, M.; Toka, L. 5G support for Industrial IoT Applications—Challenges, Solutions, and Research gaps. Sensors 2020, 20, 828.
  5. Lee, D.; Yim, K.; Lee, H. Proxy Based Resource Management Scheme in IoT Environment. In Proceedings of the 2015 10th International Conference on Broadband and Wireless Computing, Communication and Applications (BWCCA), Krakow, Poland, 4–6 November 2015; pp. 544–546.
  6. Mazhar, T.; Talpur, D.B.; Shloul, T.A.; Ghadi, Y.Y.; Haq, I.; Ullah, I.; Ouahada, K.; Hamam, H.J.B.S. Analysis of IoT Security Challenges and Its Solutions Using Artificial Intelligence. Brain Sci. 2023, 13, 683.
  7. Mazhar, T.; Irfan, H.M.; Haq, I.; Ullah, I.; Ashraf, M.; Shloul, T.A.; Ghadi, Y.Y.; Imran; Elkamchouchi, D.H.J.E. Analysis of Challenges and Solutions of IoT in Smart Grids Using AI and Machine Learning Techniques: A Review. Electronics 2023, 12, 242.
  8. Gohar, M.; Anwar, S.; Ali, M.; Choi, J.-G.; Alquhayz, H.; Koh, S.-J. Partial Bicasting with Buffering for Proxy Mobile IPV6 Mobility Management in CoAP-Based IoT Networks. Electronics 2020, 9, 598.
  9. SAJWAN, M.P. Technique to Improve Efficiency of Energy For Data Aggregation Using Internet of Things. 2023. Available online: https://shodhgangotri.inflibnet.ac.in/bitstream/20.500.14146/13316/1/manisha_phd%20synopsys.pdf (accessed on 1 August 2023).
  10. Khan, H.U.; Sohail, M.; Ali, F.; Nazir, S.; Ghadi, Y.Y.; Ullah, I.J.P.C. Prioritizing the multi-criterial features based on comparative approaches for enhancing security of IoT devices. Phys. Commun. 2023, 59, 102084.
  11. Jabir, A.J.; Shamala, S.; Zuriati, Z.; Hamid, N.J.I.S.J. A comprehensive survey of the current trends and extensions for the proxy mobile IPv6 protocol. IEEE Syst. J. 2015, 12, 1065–1081.
  12. Modares, H.; Moravejosharieh, A.; Lloret, J.; Salleh, R.B.J.I.S.J. A Survey on Proxy Mobile IPv6 Handover. IEEE Syst. J. 2016, 10, 208–217.
  13. Hussain, A.; Nazir, S.; Khan, S.; Ullah, A. Analysis of PMIPv6 extensions for identifying and assessing the efforts made for solving the issues in the PMIPv6 domain: A systematic review. Comput. Netw. 2020, 179, 107366.
  14. MM, N. ATTESTED PMIPV6 PROTOCOL FOR SEAMLESS HANDOVER IN 5G/LTE/Wi-Fi DEPLOYMENTS. 2022. Available online: https://www.tdcommons.org/dpubs_series/4987/ (accessed on 1 August 2023).
  15. Yokota, H.; Chowdhury, K.; Koodli, R.; Patil, B.; Xia, F. Fast handovers for proxy mobile IPv6. In RFC 5949; Internet Engineering Task Force (IETF): Fremont, CA, USA, 2010.
  16. Oh, S.; Choo, H. Low Latency Handover Scheme Based on Optical Buffering at LMA in Proxy MIPv6 Networks; Springer: Berlin, Heidelberg, 2009; pp. 479–490.
  17. Gupta, D.; Juneja, S.; Nauman, A.; Hamid, Y.; Ullah, I.; Kim, T.; Tag eldin, E.M.; Ghamry, N.A.J.E. Energy Saving Implementation in Hydraulic Press Using Industrial Internet of Things (IIoT). Electronics 2022, 11, 4061.
  18. Ullah, I.; Qian, S.; Deng, Z.; Lee, J.-H.J.D.C. Extended Kalman filter-based localization algorithm by edge computing in wireless sensor networks. Digit. Commun. Networks 2021, 7, 187–195.
  19. Aman, A.H.M.; Yadegaridehkordi, E.; Attarbashi, Z.S.; Hassan, R.; Park, Y.-J. A Survey on Trend and Classification of Internet of Things Reviews. IEEE Access 2020, 8, 111763–111782.
  20. Gui, G.; Liu, M.; Tang, F.; Kato, N.; Adachi, F.J.I.W.C. 6G: Opening new horizons for integration of comfort, security, and intelligence. IEEE Wirel. Commun. 2020, 27, 126–132.
  21. Guan, J.; Sharma, V.; You, I.; Atiquzzaman, M.; Imran, M. Extension of MIH for FPMIPv6 (EMIH-FPMIPv6) to support optimized heterogeneous handover. Future Gener. Comput. Syst. 2019, 97, 775–791.
  22. Berguiga, A.; Harchay, A.; Kassab, M.; Youssef, H. FPMIPv6-S: An Enhanced Mobility Protocol for 6LoWPAN-Based Wireless Mobile Sensor Networks; Springer International Publishing: Cham, Germany, 2018; pp. 252–263.
  23. Berguiga, A.; Youssef, H. FPMIPv6-S: A New Mobility Management Protocol for Wireless Sensor Networks. Proceedings of 2017 IEEE/ACS 14th International Conference on Computer Systems and Applications (AICCSA), Hammamet, Tunisia, 30 October–3 November 2017; pp. 1109–1116.
  24. Zhang, L.; Tian, Y.-C.J.W.N. An enhanced fast handover triggering mechanism for Fast Proxy Mobile IPv6. Wirel. Networks 2018, 24, 513–522.
  25. Choi, H.-Y.; Kim, K.-R.; Lee, H.-B.; Min, S.-G.; Han, Y.-H. Smart buffering for seamless handover in proxy mobile IPv6. Wirel. Commun. Mob. Comput. 2011, 11, 491–499.
More
Information
Subjects: Telecommunications
Contributors MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register : , , , , ,
View Times: 202
Revisions: 2 times (View History)
Update Date: 24 Aug 2023
1000/1000
ScholarVision Creations