Submitted Successfully!
To reward your contribution, here is a gift for you: A free trial for our video production service.
Thank you for your contribution! You can also upload a video entry or images related to this topic.
Version Summary Created by Modification Content Size Created at Operation
1
Kou Li
 -- 1260 2023-01-16 10:20:43 |
2 format correct
Conner Chen
 -11 word(s) 1249 2023-01-17 04:07:36 |

Video Upload Options

We provide professional Video Production Services to translate complex research into visually appealing presentations. Would you like to try it?
No, upload directly Yes

Confirm

Are you sure to Delete?
Yes No
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Li, K.;  Kinoshita, Y.;  Sakai, D.;  Kawano, Y. Carbon Nanotube Films as Sensor Material. Encyclopedia. Available online: https://encyclopedia.pub/entry/40208 (accessed on 18 November 2024).
Li K,  Kinoshita Y,  Sakai D,  Kawano Y. Carbon Nanotube Films as Sensor Material. Encyclopedia. Available at: https://encyclopedia.pub/entry/40208. Accessed November 18, 2024.
Li, Kou, Yuya Kinoshita, Daiki Sakai, Yukio Kawano. "Carbon Nanotube Films as Sensor Material" Encyclopedia, https://encyclopedia.pub/entry/40208 (accessed November 18, 2024).
Li, K.,  Kinoshita, Y.,  Sakai, D., & Kawano, Y. (2023, January 16). Carbon Nanotube Films as Sensor Material. In Encyclopedia. https://encyclopedia.pub/entry/40208
Li, Kou, et al. "Carbon Nanotube Films as Sensor Material." Encyclopedia. Web. 16 January, 2023.
Carbon Nanotube Films as Sensor Material
Edit
This entry is adapted from the peer-reviewed paper 10.3390/mi14010061

The photo-thermoelectric (PTE) effect in electronic materials effectively combines photo-absorption-induced local heating and associated thermoelectric conversion for uncooled and broadband photo-detection. Formation of heterogeneous material junctions across the carbon nanotube (CNT)-film-based PTE sensors, namely photo-detection interfaces, triggers the Seebeck effect with photo-absorption-induced local heating. Typical photo-detection interfaces include a channel–electrode boundary and a junction between P-type CNTs and N-type CNTs (PN junctions). While the original CNT film channel exhibits positive Seebeck coefficient values, the material selections of the counterpart freely govern the intensity and polarity of the PTE response signals. Based on these operating mechanisms, CNT film PTE sensors demonstrate a variety of physical and chemical non-destructive inspections. 

carbon nanotubes photo-thermoelectric effect broadband photo sensing

1. Introduction

Photo-sensing or photo-imaging measurements allow non-contact acquisition of optical information for monitoring targets in a large area. The optical properties of various objects are typically variable in monitoring wavelengths or bands. This inherent nature of photo-irradiation enables hyper-spectral material identification of composite objects by aggregating optical properties at multiple wavelengths [1][2] or non-contact structural reconstructions of layered targets by analyzing the degree of transmission, reflection, and absorption against illumination [3][4][5]. Therefore, photo-sensing or photo-imaging measurements advantageously play a leading role in techniques for non-destructive inspections among other types of testing methods [6][7][8][9]. To handle diverse materials or objects consisting of these in non-destructive inspections, effective use of longer-wavelength light over typical X-ray, ultraviolet (UV), and visible light (Vis) bands is a potential approach. Here, longer-wavelength light includes millimeter- or terahertz-waves (MMW, THz) and infrared light (IR: far-IR (FIR), mid-IR (MIR), and near-IR (NIR)). Irradiation in these bands exhibits transparency to even non-metallic opaque objects compared to Vis, with much lower invasiveness than with X-rays. Fingerprint spectra or intrinsic absorption characteristics often exist in these bands (e.g., polymers and gases) [10][11], and such features also enrich non-destructive inspection techniques.
To perform fundamental measurements in the above electromagnetic-wave regions, careful selection of the photo-detection mechanism is indispensable. Typical MMW–IR detection methods include electronic-, photon-, and thermal-type approaches. Schottky barrier diodes, CMOS devices, and high-electron-mobility transistors are representative examples of electronic-type detectors [12][13][14]. Electronic-type devices function with an ultrafast photo-detection speed (order of a few picoseconds) and high sensitivities, particularly in sub-THz regions in uncooled conditions. Photon-type devices, such as quantum well and quantum dot structures, function with a fast photo-detection speed (order of several tens of picoseconds) and ultrahigh sensitivities at extremely low operating temperatures [15][16]. Bolometers and Golay cells typically serve as thermal-type devices and perform uncooled ultrabroadband photo-detection ranging from the sub-THz to IR regions [17]. Under the motivation to deal with a wider range of inspection materials and objects, employing the thermal-type photo-detection mechanism is effective because of its advantageous characteristics: ultrabroadband measurements over the electronic-type and uncooled operations over the photon-type. First, ultrabroadband photo-detection is essential for aggregating multi-spectral optical information of inspection targets. Uncooled operations facilitate compact and portable systematization without the need for bulky cooling equipment. This feature is indispensable for expanding the range of evaluable targets by relaxing their inherent location and environmental limitations. Thermal-type photo-detection includes bolometric detection and the photo-thermoelectric effect (PTE effect). Device operations under the PTE effect function without applying a voltage bias and allow photo-detection with a lower limit of thermal noise. By contrast, bolometric detection requires an external voltage bias and induces 1/f noise along with thermal noise [18]. Therefore, the device design and the associated system development of PTE effect-based photo-sensing or photo-imaging techniques potentially enrich the existing non-destructive inspection platforms.
The PTE effect generally synergizes two different energy conversion phenomena: photo-thermal and thermoelectric. The PTE effect induces thermoelectric conversion at the photo-detection interface with local heating owing to photo-absorption. This means that utilizing the PTE sensor detects external irradiation by obtaining electrical response signals. When the PTE sensor consists of a single material structure, the photo-detection interface locates at the edge of the channel to localize the photo-induced heating. Here, the PTE response is proportional to the Seebeck coefficient of the device material and photo-induced temperature gradient across the channel [19]. On the other hand, the PTE sensor consisting of multiple materials often exhibits its photo-detection interface in the bonding junction. This is because a difference between each material’s Seebeck coefficient corresponds to the effective Seebeck coefficient of the bonding junction, and proper material combinations lead to enhancing the PTE response [20]. Therefore, the PTE device design includes not only device material evaluations from the viewpoint of photonic, thermal, and electronic aspects but also material combinations and their structural management, allowing a wide range of investigation approaches. Indeed, today’s investigation field of the PTE device design is rapidly growing [21][22][23], and various materials exhibit their potential suitability for PTE conversion, as described later. However, development of PTE sensors satisfying sensitive photo-detection in the aforementioned MMW–NIR bands and the associated demonstrations of ultrabroadband multi-wavelength non-destructive inspections are still insufficient.

2. Sensor Material: CNT Films

As the first step in designing PTE sensors, this chapter breaks down the fundamental properties of carbon nanotube (CNT) films as the device material. CNT films consist of randomly stacked CNTs and their network structures, resulting in high mechanical strength [24] and flexibility [25]. The CNT film also effectively absorbs ultrabroadband photo-irradiation at room temperature [26]. These features emphasize that employing a CNT film plays an essential role in developing ubiquitous non-destructive inspection devices and systems among other representative materials for PTE conversion, such as graphene [27], CNTs [28], MoS2 [29], SnSe [30], NbS3 [31], and PEDOT:PSS [32]. The CNT film collectively and advantageously satisfies the macroscopic free deformations and ultrabroadband photo-absorption among the above candidates. The CNT film further exhibits the Seebeck coefficients ranging from tens to hundreds of µV/K, which are comparable to those of PEDOT:PSS and so on. Based on these, utilizing the CNT film effectively converts external ultrabroadband photo-irradiation power to electrical signals for sensing or imaging measurements and simultaneously provides omni-directional viewing angles to 3D-structure targets.
Regarding the current-voltage characteristics of the CNT-film-based PTE sensor with and without external light irradiation to the device. The result clearly shows ohmic contacts between the CNT film channel and metal electrodes for signal readout, and this behavior allows PTE conversion under zero-bias-voltage operations, as mentioned earlier. The overlapping of each energy band structure of randomly stacked CNTs is a possible factor for the ohmic contacts of the single-walled semiconducting-metallic-mixed CNT films with diverse metal electrode materials.
As dispersion solutions of CNTs are widely available, suction filtration is a possible approach. Employing laser-processed thin-film masks allows selective CNT film patterning. This method freely controls the shape, size, and positions of the CNT films via laser processing on the mask. Management of the mask’s thickness and the solution’s drop amount also leads to thickness control of the CNT film up to micrometer-order. While efficient photo-absorption requires micrometer-order thickness of CNT films [33], the above thickness control eases the device design. Other representative CNT film patterning approaches include lithography (nanometer-order thickness) [34] and manual cutting (up to millimeter-order thickness) [35]. Although manual cutting potentially contributes to fabricating the PTE sensors for its available thickness range, the presented self-aligned suction filtration process advantageously realizes higher-yield repeatable micrometer-order spacing or patterning of the CNT film over manual handling. On the other hand, management of the solution’s drop amount controls the friction force between the mask and a membrane filter. This means that the self-aligned suction filtration of the CNT film enables both direct patterning on the membrane and embedding in the mask film. Therefore, the presented approach freely develops CNT film patterning on various thin-film materials regardless of their water absorbability.

References

  1. Kawase, K.; Ogawa, Y.; Watanabe, Y.; Inoue, H. Non-destructive terahertz imaging of illicit drugs using spectral fingerprints. Opt. Express 2003, 11, 2549–2554.
  2. Nishino, K.; Subpa-asa, A.; Asano, Y.; Shimano, M.; Sato, I. Variable ring light imaging: Capturing Transient Subsurface Scattering with an Ordinary Camera. In Proceedings of the European Conference on Computer Vision, Munich, Germany, 8–14 September 2018; pp. 598–613.
  3. Mathews, P.J.; Campbell, Q.P.; Xu, H.; Halleck, P. A review of the application of X-ray computed tomography to the study of coal. Fuel 2017, 209, 10–24.
  4. Furukawa, T.; Suyama, T.Q.; Li, K.; Sato, I.; Kawano, K. Internal Structure Visualization by Terahertz Computed Tomography with Carbon Nanotube Photo-Scanner toward Multi-Frequency Image Reconstruction. In Proceedings of the IEEE Asia-Pacific Microwave Conference, Brisbane, Australia, 28 November–1 December 2021; pp. 341–343.
  5. Wada, S.; Li, K.; Sun, M.; Utaki, R.; Kawano, Y. Three-Dimensional Shape Reconstruction in Millimeter-Terahertz Wave Regions with Carbon Nanotube Film Array Scanners. In Proceedings of the International Topical Meeting on Microwave Photonics, Piscataway, NJ, USA, 24–26 November 2020; pp. 264–266.
  6. Wang, B.; Zhong, S.; Lee, T.L.; Fancey, K.S.; Mi, J. Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review. Adv. Mech. Eng. 2020, 12, 1–28.
  7. Tao, Y.H.; Fitzgerald, A.J.; Wallace, V.P. Non-Contact, Non-Destructive Testing in Various Industrial Sectors with Terahertz Technology. Sensors 2020, 20, 712.
  8. Aryan, P.; Sampath, S.; Sohn, H. An Overview of Non-Destructive Testing Methods for Integrated Circuit Packaging Inspection. Sensors 2018, 18, 1981.
  9. Ciampa, F.; Mahmoodi, P.; Pinto, F.; Meo, M. Recent Advances in Active Infrared Thermography for Non-Destructive Testing of Aerospace Components. Sensors 2018, 18, 609.
  10. Tonouchi, M. Cutting-edge terahertz technology. Nat. Photon. 2007, 1, 97–105.
  11. Ong, H.C.; Chen, W.H.; Singh, Y.; Gan, Y.Y.; Chen, C.Y.; Show, P.L. A state-of-the-art review on thermochemical conversion of biomass for biofuel production: A TG-FTIR approach. Energy Convers. Manag. 2020, 209, 112634.
  12. Han, S.P.; Ko, H.; Park, J.W.; Kim, N.; Yoon, Y.J.; Shin, J.H.; Kim, D.Y.; Lee, D.H.; Park, K.H. InGaAs Schottky barrier diode array detector for a real-time compact terahertz line scanner. Opt. Express 2013, 21, 25874–25882.
  13. Tohmé, L.; Blin, S.; Ducournau, G.; Nouvel, P.; Coquillat, D.; Hisatake, S.; Nagatsuma, T.; Pénarier, A.; Varani, L.; Knap, W.; et al. Terahertz wireless communication using GaAs transistors as detectors. Electron. Lett. 2014, 50, 323–325.
  14. Boubanga-Tombet, S.; Teppe, F.; Torres, J.; Moutaouakil, A.E.; Coquillat, D.; Dyakonova, N.; Consejo, C.; Arcade, P.; Nouvel, P.; Marinchio, H.; et al. Room temperature coherent and voltage tunable terahertz emission from nanometer-sized field effect transistors. Appl. Phys. Lett. 2010, 97, 262108.
  15. Komiyama, S.; Astafiev, O.; Antonov, V.; Kutsuwa, T.; Hirai, H. A single-photon detector in the far-infrared range. Nature 2000, 403, 405–407.
  16. Ikushima, K.; Yoshimura, Y.; Hasegawa, T.; Komiyama, S.; Ueda, T.; Hirakawa, K. Photon-counting microscopy of terahertz radiation. Appl. Phys. Lett. 2006, 88, 152110.
  17. Otani, C.; Taino, T.; Nakano, R.; Hoshino, K.; Shibuya, T.; Myoren, H.; Ariyoshi, S.; Sato, H.; Shimizu, H.M.; Takada, S.; et al. A broad-band THz radiation detector using a Nb-based superconducting tunnel junction. IEEE Trans. Appl. Supercond. 2005, 15, 591–594.
  18. Cai, X.; Sushkov, A.B.; Suess, R.J.; Jadidi, M.M.; Jenkins, G.S.; Nyakiti, L.O.; Myers-Ward, R.L.; Li, S.; Yan, J.; Gaskill, D.K.; et al. Sensitive room-temperature terahertz detection via the photothermoelectric effect in graphene. Nature Nanotech. 2014, 9, 814–819.
  19. Lu, X.; Sun, L.; Jiang, P.; Bao, X. Progress of Photodetectors Based on the Photothermoelectric Effect. Adv. Mater. 2019, 31, 1902044.
  20. He, X.; Fujimura, N.; Lloyd, J.M.; Erickson, K.J.; Talin, A.A.; Zhang, Q.; Gao, W.; Jiang, Q.; Kawano, Y.; Hauge, R.H.; et al. Carbon nanotube terahertz detector. Nano Lett. 2014, 14, 3953–3958.
  21. Konabe, S.; Yamamoto, T. Valley photothermoelectric effects in transition-metal dichalcogenides. Phys. Rev. B 2014, 90, 075430.
  22. Basko, D. A Photothermoelectric Effect in Graphene. Science 2011, 334, 610–611.
  23. Lai, Y.S.; Tsai, C.Y.; Chang, C.K.; Huang, C.Y.; Hsiao, V.K.S.; Su, Y.O. Photothermoelectric Effects in Nanoporous Silicon. Adv. Mater. 2016, 28, 2644–2648.
  24. Cao, A.; Dickrell, P.L.; Sawyer, W.G.; Ghasemi-Nejhad, M.N.; Ajayan, P.M. Super-compressible foamlike carbon nanotube films. Science 2005, 25, 1307–1310.
  25. Park, S.; Vosguerichian, M.; Bao, Z. A review of fabrication and applications of carbon nanotube film-based flexible electronics. Nanoscale 2013, 5, 1727–1752.
  26. Kivistö, S.; Hakulinen, T.; Kaskela, A.; Aitchison, B.; Brown, D.P.; Nasibulin, A.G.; Kauppinen, E.I.; Härkönen, A.; Okhotnikov, O.G. Carbon nanotube films for ultrafast broadband technology. Opt. Express 2009, 17, 2358–2363.
  27. Zhang, D.; Song, Y.; Ping, L.; Xu, S.; Yang, D.; Wang, Y.; Yang, Y. Photo-thermoelectric effect induced electricity in stretchable graphene-polymer nanocomposites for ultrasensitive strain sensing. Nano Res. 2019, 12, 2982–2987.
  28. Zubair, A.; Wang, X.; Mirri, F.; Tsentalovich, D.E.; Fujimura, N.; Suzuki, D.; Soundarapandian, K.P.; Kawano, Y.; Pasquali, M.; Kono, J. Carbon nanotube woven textile photodetector. Phys. Rev. Mater. 2018, 2, 015201.
  29. He, M.; Lin, Y.J.; Chiu, C.M.; Yang, W.; Zhang, B.; Yun, D.; Xie, Y.; Lin, Z.H. A flexible photo-thermoelectric nanogenerator based on MoS2/PU photothermal layer for infrared light harvesting. Nano Energy 2018, 49, 588–595.
  30. Zhong, Y.; Zhang, L.; Linseis, V.; Qin, B.; Chen, W.; Zhao, L.D.; Zhu, H. High-quality textured SnSe thin films for self-powered, rapid-response photothermoelectric application. Nano Energy 2020, 72, 104742.
  31. Wu, W.; Wang, Y.; Niu, Y.; Wang, P.; Chen, M.; Sun, J.; Wang, N.; Wu, D.; Zhao, Z. Thermal localization enhanced fast photothermoelectric response in a quasi-one-dimensional flexible NbS3 photodetector. ACS Appl. Mater. Interfaces 2020, 12, 14165–14173.
  32. Zhang, M.; Yeow, J.T.W. A flexible, scalable, and self-powered mid-infrared detector based on transparent PEDOT:PSS/graphene composite. Carbon 2020, 156, 339–345.
  33. Suzuki, D.; Li, K.; Ishibashi, K.; Kawano, Y. A Terahertz Video Camera Patch Sheet with an Adjustable Design based on Self-Aligned, 2D, Suspended Sensor Array Patterning. Adv. Funct. Mater. 2021, 31, 2008931.
  34. Hills, G.; Lau, C.; Wright, A.; Fuller, S.; Bishop, M.D.; Srimani, T.; Kanhaiya, P.; Ho, R.; Amer, A.; Stein, Y.; et al. Modern microprocessor built from complementary carbon nanotube transistors. Nature 2019, 572, 595–602.
  35. Suzuki, D.; Oda, S.; Kawano, Y. A flexible and wearable terahertz scanner. Nat. Photon. 2016, 10, 809–813.
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license; additional terms may apply. By using this site, you agree to the Terms and Conditions and Privacy Policy.
Upload a video for this entry
Information
Subjects: Engineering, Electrical & Electronic; Nanoscience & Nanotechnology; Imaging Science & Photographic Technology
Contributors MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register :
Kou Li
,
Yuya Kinoshita
,
Daiki Sakai
,
Yukio Kawano
View Times: 492
Revisions: 2 times (View History)
Update Date: 17 Jan 2023
Table of Contents
    1000/1000
    Hot Most Recent
    ScholarVision Creations
    Feedback