Submitted Successfully!
To reward your contribution, here is a gift for you: A free trial for our video production service.
Thank you for your contribution! You can also upload a video entry or images related to this topic.
Version Summary Created by Modification Content Size Created at Operation
1
kundani Prince magoda
 -- 2461 2022-09-27 11:28:10 |
2 format correct
Catherine Yang
 Meta information modification 2461 2022-09-28 03:46:26 |

Video Upload Options

We provide professional Video Production Services to translate complex research into visually appealing presentations. Would you like to try it?
No, upload directly Yes

Confirm

Are you sure to Delete?
Yes No
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Magoda, K.;  Mekuto, L. Metallurgical Technologies to Treat E-Waste. Encyclopedia. Available online: https://encyclopedia.pub/entry/27679 (accessed on 15 November 2024).
Magoda K,  Mekuto L. Metallurgical Technologies to Treat E-Waste. Encyclopedia. Available at: https://encyclopedia.pub/entry/27679. Accessed November 15, 2024.
Magoda, Kundani, Lukhanyo Mekuto. "Metallurgical Technologies to Treat E-Waste" Encyclopedia, https://encyclopedia.pub/entry/27679 (accessed November 15, 2024).
Magoda, K., & Mekuto, L. (2022, September 27). Metallurgical Technologies to Treat E-Waste. In Encyclopedia. https://encyclopedia.pub/entry/27679
Magoda, Kundani and Lukhanyo Mekuto. "Metallurgical Technologies to Treat E-Waste." Encyclopedia. Web. 27 September, 2022.
Metallurgical Technologies to Treat E-Waste
Edit
This entry is adapted from the peer-reviewed paper 10.3390/recycling7050067
e-waste is any broken/unwanted electrical and electronic equipment (EEE) that has reached the end of its lifecycle or economic life span. E-waste has been traditionally treated with metallurgical technologies such as mechanical separations, pyro-metallurgical, and hydrometallurgical methods. The technologies such as the pyro-metallurgical process to treat e-waste has been studied and linked with environmental challenges such as the generation of large quantities of harmful by-products, the formation of brominated and chlorinated di-benzo furans, and dioxins from halogens present in the plastic part of e-waste during the burning process. The pyro-metallurgical process requires high-energy to treat e-waste and is inefficient in the recovery of precious metals. Hydrometallurgical technology has also been explored, mostly involving chemical reagents such as strong acids (sulphuric acid, nitric acid, hydrochloric acid) and complex chemical reagents such as cyanide and thiosulfate to leach base, rare earth, and precious metals. 
waste printed circuit board acidophilic bacteria cyanogenic bacteria

1. Pyro-Metallurgical Processes

The pyrometallurgical processes involve smelting, combustion, incineration, and pyrolysis in a furnace or blast furnace. Pyrolysis is carried out at elevated temperatures of up to 900 °C (or even higher in some instances) to treat e-waste, which generates 70% metal-rich residue, 23% oil, and 5% gases [1][2]. These processes are associated with high-energy consumption, are expensive and generate toxic compounds, including dioxins and furans. This is because e-wastes, especially PCBs, contain halogenated flame-retardants [3].

2. Hydrometallurgical Process

The hydrometallurgical process primarily involves the use of chemical reagents, where strong acids are used to leach base metals while chemical reagents such as cyanide, halide, thiourea, and thiosulfate are used to leach out precious metals from e-waste [2][3]. These processes require large quantities of chemical reagents and produce a variety of by-products and high volumes of effluent waste. It is noteworthy to mention that the recovery of precious metals from ores and e-waste is preferred via cyanide leaching due to its potential to yield high recovery and economic cost. However, this method has some disadvantages, such as increasing the additional work of treating the effluent before disposal, and cyanide is one of the controlled chemicals due to its toxicity [4].

3. Biohydrometallurgical Processes to Treat E-Waste

Biometallurgical processes are mostly referred to as bioleaching. This is a process that has received significant attention as a promising sustainable technology to recover metals from e-waste due to its advantages such as low operational cost, low energy consumption, reduced chemical reagents usage, and easy manageability of secondary waste effluents [5][6][7][8]. However, this process is slow to leach metals; hence, it has not been fully industrialised for ores with high metal content and e-waste [7][9]. Table 1 shows the metallurgical process used to leach metals from e-waste, including their advantages and disadvantages.
Table 1. Comparison of applied metallurgical processes [10][11][12][13].
Process Description Advantages Disadvantages
Pyro-metallurgy
The process involves the use of high temperature liquid phases such as fused salts (LiCl and KCl) and fused metals (Cd, Bi, Al) The energy obtained in this process can be utilised in upstream or downstream processes and requires minimal chemical consumption. High energy consumption due to high operational temperatures within the process.
The process generates toxic compounds such as dioxins and furans since e-waste contains halogenated flame-retardants.
Emits strong gas emissions such as CO2, and CO is used as reducing agent.
Hydrometallurgy
The process involves the use of chemical reagents such as H2SO4 and HNO3 solutions to extract metals from e-waste It saves time as it has a short process time and high efficiency on leaching metals Expensive sulphur conversion technology. Generates a high volume of effluents which may pollute local water sources. High concentrations of metals in ores or e-waste are required. Uses a large quantity of chemical reagents. High operational cost.
Bio-hydrometallurgy
The process uses microorganisms such as bacteria and fungi to exact metals from e-waste and ores instead of chemical solutions Environmentally friendly. Low operational cost. Less use of chemical reagents. Low energy consumption. Simple to maintain. Bio-reactions not easily controlled. The technology is still under development for industrial use. Long operational period and time-consuming.

3.1. Bioleaching Technology

Bioleaching of metals from e-waste is divided into two processes: (1) the One-step and (2) the Two-step bioleaching process.

One-Step Bioleaching Process

In one-step bioleaching, the microbial inoculum sourced from the exponential growth phase is added to a suitable bioleaching medium and the e-waste. The process produces ferric iron (Fe3+) through the oxidation of ferrous iron (Fe2+) and protons, which slowly solubilises the embedded metals within the e-waste. The one-step bioleaching process can only be operated at low pulp density ranging between 1 and 10% (w/v) due to the presence of the toxic substances in e-waste that inhibit microbial growth [6]. Hence, the direct culturing of microorganisms in the presence of e-waste is not advisable due to the presence of toxic substances in e-waste that inhibits microbial growth, which in-turn lowers the availability of the extractant, leading to low metal extraction efficiencies [14]

Two-Step Bioleaching Process

In the first step of the two-step bioleaching process, microorganisms are cultured in the absence of e-waste in their respective culture medium under their optimum conditions. When the cells have reached their maximum cell growth and lixiviant production (Fe3+ and protons), the e-waste is then added to the medium as a second step [6]. This process reduces the inhibition of microbial growth caused by the toxic substances available in the e-waste. The two-step bioleaching process has been found to be more attractive as it results in rapid and high metal extractions, and it can be carried out at high pulp density, unlike the one-step bioleaching process. A large quantity of Fe3+/protons is readily available to react with the added e-waste and dissolution metals at the fastest possible rate [15].

3.2. Bioleaching of Base Metals from E-Waste

The well-known acidophilic microorganisms Acidithiobacillius ferroxidans, Leptospririllum ferrooxidans, Acidithiobacillus thiooxidans and others play a vital role in the extraction of metals from e-waste. These are characterised by (1) survival or operation at low pH values (<2), (2) high metal concentration tolerance, and (3) they assist in the generation of lixiviants for the solubilisation of metals from the solid phase into the aqueous phase [8][16]. The metals embedded within the e-waste are in their insoluble form, whereas in sulphide minerals, they are present in the form of metal sulphides, where these iron and sulphur-oxidising organisms derive their energy from. Microorganisms in the bioleaching system use pyrite/sulphur as substrates to continually produce Fe3+ and protons as lixiviants. Therefore, in the bioleaching system of e-waste, it is necessary to add ferrous iron (Fe2+) and a source of sulphur, since such substrates are not available within the e-waste [8]. The acidophilic microorganisms oxidise Fe2+ to produce Fe3+, and sulphur oxidation to produce protons which are responsible for the conversion of insoluble metals (Cu0, Zn0, and Ni0) to their respective water-soluble metals (Cu2+, Zn2+, and Ni2+) as represented from Equations (1)–(6) [6][17][18].
(1) 4 Fe 2 + + O 2   → Fe - oxidizer Bacteria   4 Fe 3 + + H 2 O [ Δ G 0 = − 39.7 kJ   mol − 1 ] (2) 2 Fe 3 + + Cu 0 → 2 Fe 2 + + Cu 2 + [ Δ G 0 = − 347.1 kJ   mol − 1 ] (3) 2 Fe 3 + + Zn 0 → 2 Fe 2 + +   Zn 2 + [ Δ G 0 = − 1235.9 kJ   mol − 1 ] (4) 2 Fe 3 + + Ni 0 → 2 Fe 2 + +   Ni 2 + [ Δ G 0 = − 822.6 kJ   mol − 1 ] (5) S 0 + 105 O 2 + H 2 O → microbes   SO 4 2 − + 2 H + [ Δ G 0 = − 774.5 kJ   mol − 1 ] (6) 2 Cu 0 + 2 H + → Cu 2 + + 2 H 2 O
Copper, Zinc, and Nickel dissolution from e-waste occurs through the action of Fe3+ in acidic conditions, maintained by the oxidation of sulphur by the microorganisms (see Equations (2)–(5)). All these chemical reactions occur at an ambient temperature and atmospheric pressure [6]. Biohydrometallurgical studies on recovering metals from e-waste have been widely reported with the use of mesophilic and chemolithotrophic bacteria such as Acidithiobacillus ferroxidans and Acidithiobacillus thioxidans, and acidophilic, moderately thermophilic microorganisms such as Sulfobacillus thermosulfidooxidance and Thermoplasma acidophilum, including cyanogenic microorganisms such as Chromobacterium violaceum and Pseudomonas fluorescens [9][17].
Pradhan and Kumar [14] studied the bioleaching of metals from personal computer e-waste with both one and two-step bioleaching processes using cyanogenic microorganisms (Chromobacterium violaceum, Pseudomonas aeruginosa and Pseudomonas fluorescens) at a pH of 7.2. They were incubated at 30 °C with an incubator shaker speed at 150 rpm. The researchers also studied the impact of pulp density of 10 and 20% w/v and discovered that the bioleaching rate depends on the pulp densities. The authors reported that C. violaceum and the mixture (C. violaceun and P. aeruginosa) achieved maximum bio-leachability efficiency of more than 79, 69, 46, 9, and 7% (C. violaceum) and 83, 73, 49, 13, and 8% (C. violaceun and P. aeruginosa) of Cu, Au, Zn, Fe, and Ag, respectively [14]. The mentioned studies are a demonstration that the two-step bioleaching process is more effective compared to the one stage process.

3.3. Bioleaching of Precious Metals from E-waste

Different cyanogenic bacterial strains such as Chromobacterium violeaceum, Pseudomonas fluorescens, Pseudomonas aeruginosa, Bacillus megaterium have been exploited to extract precious metals and metalloids. These cyanogenic bacteria can detoxify and degrade the excess cyanide to β-cyanoalanine by β-cyanoalanine synthase during the late stationary and/or death growth phase, which makes the bio-cyanidation process attractive due to significant environmental and health risk mitigation, thus making the bio-cyanidation process eco-friendly [8][19][20]. Cyanogenic bacteria are effectively used to recover precious metals and metalloids such as Au, Ag, Pt, Pd, Ti and Mo from e-waste through a process referred to as alkaline bioleaching or the heterotrophic bioleaching process [13]. The cyanogenic bacteria are all capable of producing hydrocyanic acid (HCN)/cyanide ion (CN−) as their secondary metabolite at their late stationary phase during the decarboxylation of glycine, which serves as a lixiviant for the dissolution of the solid metals [12][21]. Gold cyanidation is an electrochemical process that consists of anodic and cathodic reactions, where gold is dissolved in alkaline cyanide solution to form a gold cyanide complex, as summarised by Elsner’s equations (see Equations (7)–(9)) [2][4][22]. This cyanide can be produced by the mentioned organisms and the extraction process can be carried out as demonstrated by Elsner’s equation [21][23][24].
 
(7) 4 Au   +   S 8 CN − → 4 Au ( CN ) 2 − + 4 e − [ Δ G 0 = − 433 kJ mol − 1 ] (8) O 2 + 2 H 2 O + 4 e −   →   4 OH − (9) 4 Au + 8 CN - + O 2   +   2 H 2 O   →   4 Au ( CN ) 2 -   +   4 OH -
It is essential to extract base metals from e-waste before the recovery of precious metals since they are present in high quantities and can quickly form cyanide complexes at higher concentrations than precious metals, thus lowering the recovery of precious metals [19][25][26]. Li et al. [2] investigated the bio-cyanidation of gold using a two-step bioleaching process, where P. fluorescens was used to recover gold from mobile phone e-waste powder in a 250 mL stirred airlifted tank reactor incubated at 30 °C with an incubator shaker speed at 150 rpm. The authors observed a 54% bioleaching efficiency of gold when they added glycine and methionine in the growth medium. In addition, these authors [2] also studied the effect of pulp density (0.33% w/v, 0.67% w/v, 1% w/v, 1.5% w/v and 1.67 w/v) on the bioleaching efficiency of gold and achieved 42% bioleaching efficiency of gold with a pulp density of 0.33% w/v and also noticed that when the pulp density increased, the bioleaching efficiency decreased [2]. Işıldar et al. [25] used Pseudomonas fluorescens and Pseudomonas putida to extract gold from desktop computers, laptops, and mobile phone e-waste in 300 mL stirred tank bioreactors incubated at 30 °C and achieved the highest gold recovery of 44%, using P. putida at 0.5% w/v pulp density [25].
Natarajan et al. [20] studied the bio-cyanidation of gold from electronic strap material (ESM) powder with a particle size of less than 100 µm in a two-step bioleaching process using Chromobacterium violeaceum and engineered strains and achieved the highest gold recovery efficiency of 30% with engineered strains at a pulp density of 0.5% w/v, compared to 11% achieved by C. violeaceum. The study also demonstrated that the increase in pulp density decreased gold recovery efficiency. This was due to the increased toxicity levels of the metals [20]. Marappa et al. [27] studied bio-cyanidation of gold and other precious metals from PCBs powder in a one and two-step bioleaching process using two Frankia bacterial strains (Frankia casuarinae and Frankia sp.). They observed that Frankia casuarinae achieved the highest gold bioleaching efficiency of 75% compared to Frankia sp. In contrast, Frankia sp. achieved the highest copper recovery efficiency of 94% compared to Frankia casuarinae [27]. Arshadi and Mousavi [28] investigated the biocyanidation of gold and copper simultaneously from computer e-waste using the central composite design of response surface methodology (CCD-RSM) method to achieve maximum metal bioleaching efficiency and the optimum conditions. The authors evaluated four factors that affect bioleaching activity using Bacillus megaterium in a 250 mL stirred tank reactor and achieved maximum gold extraction efficiency of 36.8% at an initial pH of 10 and 2.5% w/v pulp density and glycine concentration of 0.5 g/L. The authors pre-treated the e-waste with A. ferrooxidans to bioleach copper as a first step, while the second step involved the extraction of gold by cyanide-producing Bacillus megaterium at an extraction efficiency of 63.8% [28]. Pourhossein et al. [26] investigated the bioleaching of precious metals from spent light diode lamps (LED) using A. ferrooxidans as the first process to pre-treat LED e-waste to extract base metals and thereafter, used Bacillus megaterium to bioleach precious metals from the residue that was generated in the first process. In this study, A. ferrooxidans bioleached 80% Cu, 94% Ni, 93% Sn, 68% Al, 51% Pb, 46% Cr and 35% Fe, whereas Bacillus megaterium produced a maximum cyanide concentration of 15 g/L and achieved a high dissolution efficiency of 93% Au, 91% Ag, 98% Ni, 87 Cu, and 84% Ga after 4 days. The authors also noticed that there was a low dissolution of precious metals when untreated LED powder was used [26]. These studies demonstrate the efficacy of using the two-step process for the bioleaching of base and precious metals [29][30], which is proposed in the subsequent section as the only viable extraction process of base and precious metals from e-waste. These studies are summarised in Table 2.
Table 2. The bioleaching of metals from e-waste by different biological approach.
E-Waste Material Parameter Investigated Microorganisms Used Reactor Type Bioleached Metals Noteworthy Findings References
PCBs (particle size less 100 µm) Pulp density (1 to 15 g/L) Acidithiobacillus ferrooxidans Stirred tank (130 rpm and 30 °C) Ni and Cu (99%) at day 11 and 98% at day 14 Noted that A. ferrooxidans adopted at high pulp density [31]
PCBs (particle size less 150 µm) Pulp density (10, 50, 100 g/L), Glycine (2.5, 5, 7.5, 10 g/L), Temperature (25, 30, 35, 40), and pH (7, 8, 9) Pseudomonas balearica Stirred tank (150 rpm) Au and Ag (68.5% and 33.8%) Further increase in pulp density (100g/L) decreased the bioleaching efficiency and the optimum conditions were 10 g/L pulp density, 5 g/L glycine, pH 9, and 30 °C [32]
PCBs (personal computer) (37 to 149 μm particle size) E-waste concentration (1.5, and 10% v/w) Chromobacterium violaceum, Pseudomonas aeruginosa and Pseudomonas fluorescens Stirred tank (150 rpm and 30 °C) Cu, Au, Zn, Fe and Ag, Discovered higher bioleaching efficiency of 73, 17% with mixture of P. aeruginosa and C. violaceum and 69,3 with C. violaceum alone and its seems to have higher tolerance in metal toxicity as metal concentration increased from 1 to 10% v/w [14]
PCBs (computer) 35 g/L pulp density, pH controlled at 1.8 Acidithiobacillus ferrooxidans (10% v/v) and mixed of bacteria from AMD Stirred tank (30 °C, 170 rpm) Cu (92%) Cu recovered at high pulp density with significant bioleaching efficiency [33]
PCBs 0,5 g pre-treated PCBs powder, pH (7, 8, 9), 10 g/L mixture glycine and methionine (2, 2.5, 5, 10 g/L) Pseudomonas fluorescens Bubble tank (30 °C, 150 rpm, and air at 100 mL/min) Au (54%) Discovered that the pH of 9 achieved the highest Gold bioleaching efficiency compared to pH of 7 and 8, respectively, and the Gold bioleaching efficiency decreased when the glycine substrate is 20 g/L [34]
PCBs Ground PCB concentrations of 1, 5, 10 and 20% (w/v) and pyrite as source of lixiviant Acidithiobacillus caldus, Leptospirillum ferriphilum, Sulfobacillus benefaciens
and Ferroplasma acidiphilum		 Stirred tank (150 rpm and 37 °C) Cu, Cr, Ni, Sn, Zn Discovered that the pulp density of 5% and above have a significant negative impact on bioleaching efficiency [35]

References

  1. Işıldar, A.; Rene, E.R.; van Hullebusch, E.D.; Lens, P.N. Electronic waste as a secondary source of critical metals: Management and recovery technologies. Resour. Conserv. Recycl. 2018, 135, 296–312.
  2. Li, J.; Wen, J.; Guo, Y.; An, N.; Liang, C.; Ge, Z. Bioleaching of gold from waste printed circuit boards by alkali-tolerant Pseudomonas fluorescens. Hydrometallurgy 2020, 194, 105260.
  3. Liu, R.; Li, J.; Ge, Z. Review on Chromobacterium Violaceum for Gold Bioleaching from E-waste. Procedia Environ. Sci. 2016, 31, 947–953.
  4. Faramarzi, M.A.; Mogharabi-Manzari, M.; Brandl, H. Bioleaching of metals from wastes and low-grade sources by HCN-forming microorganisms. Hydrometallurgy 2020, 191, 105228.
  5. Wu, W.; Liu, X.; Zhang, X.; Zhu, M.; Tan, W. Bioleaching of copper from waste printed circuit boards by bacteria-free cultural supernatant of iron–sulfur-oxidizing bacteria. Bioresour. Bioprocess. 2018, 5, 10.
  6. Dave, S.; Sodha, A.; Tipre, D. Microbial technology for metal recovery from e-waste printed circuit boards. J. Bacteriol. Mycol. Open Access 2018, 6, 241–247.
  7. Kiddee, P.; Pradhan, J.K.; Mandal, S.; Biswas, J.K.; Sarkar, B. An overview of treatment technologies of e-waste. In Handbook of Electronic Waste Management; Elsevier: Amsterdam, The Netherlands, 2020; pp. 1–18.
  8. Harikrushnan, B.; Shreyass, G.; Hemant, G.; Pandimadevi, M. Recovery of metals from printed circuit boards (pcbs) using a combination of hydrometallurgical and biometallurgical processes. Int. J. Environ. Res. 2016, 10, 511–518.
  9. Priya, A.; Hait, S. Extraction of metals from high grade waste printed circuit board by conventional and hybrid bioleaching using Acidithiobacillus ferrooxidans. Hydrometallurgy 2018, 177, 132–139.
  10. Habibi, A.; Kourdestani, S.S.; Hadadi, M. Biohydrometallurgy as an environmentally friendly approach in metals recovery from electrical waste: A review. Waste Manag. Res. 2020, 38, 232–244.
  11. Ji, X.; Yang, M.; Wan, A.; Yu, S.; Yao, Z. Bioleaching of typical electronic waste—printed circuit boards (wpcbs): A short review. Int. J. Environ. Res. Public Health 2022, 19, 7508.
  12. Govindarajan, S.G. Abiotic and Biotic Leaching Characteristics of Pyrrhotite Tailings from the Sudbury, Ontario Area. University of Toronto: Toronto, ON, Canada, 2017.
  13. Xu, L.; Xiao, Y.; van Sandwijk, A.; Xu, Q.; Yang, Y. Production of nuclear grade zirconium: A review. J. Nucl. Mater. 2015, 466, 21–28.
  14. Pradhan, J.K.; Kumar, S. Metals bioleaching from electronic waste by Chromobacterium violaceum and Pseudomonads sp. Waste Manag. Res. J. A Sustain. Circ. Econ. 2012, 30, 1151–1159.
  15. Benzal, E.; Solé, M.; Lao, C.; Gamisans, X.; Dorado, A.D. Elemental Copper Recovery from e-Wastes Mediated with a Two-Step Bioleaching Process. Waste Biomass-Valorization 2020, 11, 5457–5465.
  16. Lee, J.-C.; Pandey, B.D. Bio-processing of solid wastes and secondary resources for metal extraction—A review. Waste Manag. 2012, 32, 3–18.
  17. Khatri, B.R.; Sodha, A.B.; Shah, M.B.; Tipre, D.R.; Dave, S.R. Chemical and microbial leaching of base metals from obsolete cell-phone printed circuit boards. Sustain. Environ. Res. 2018, 28, 333–339.
  18. Işıldar, A.; Vossenberg, J.V.D.; Rene, E.R.; Hullebusch, E.D.V.; Lens, P.N. Biorecovery of metals from electronic waste. In Sustainable Heavy Metal Remediation; Springer: Cham, Switzerland, 2017; pp. 241–278.
  19. Baniasadi, M.; Vakilchap, F.; Bahaloo-Horeh, N.; Mousavi, S.M.; Farnaud, S. Advances in bioleaching as a sustainable method for metal recovery from e-waste: A review. J. Ind. Eng. Chem. 2019, 76, 75–90.
  20. Natarajan, G.; Tay, S.B.; Yew, W.S.; Ting, Y.-P. Engineered strains enhance gold biorecovery from electronic scrap. Miner. Eng. 2015, 75, 32–37.
  21. Wadsworth, M.; Zhu, X.; Thompson, J.; Pereira, C. Gold dissolution and activation in cyanide solution: Kinetics and mechanism. Hydrometallurgy 2000, 57, 1–11.
  22. Das, S.; Natarajan, G.; Ting, Y.-P. Bio-extraction of precious metals from urban solid waste. In Proceedings of the AIP Conference, West Java, Indonesia, 29 January 2017.
  23. Hiskey, J.B.; Atluri, V.P. Dissolution Chemistry of Gold and Silver in Different Lixiviants. Miner. Process. Extr. Met. Rev. 1988, 4, 95–134.
  24. Free, M.L.; Moats, A.M. Chapter 2.7—hydrometallurgical processing. In Treatise on Process Metallurgy; Seetharaman, S., Ed.; Elsevier: Boston, UK, 2014; pp. 949–982.
  25. De Andrade, L.M.; Rosario, C.G.A.; de Carvalho, M.; Espinosa, D.C.R.; Tenório, J.A.S. Copper recovery from printed circuit boards from smartphones through bioleaching. In TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings; Springer International Publishing: Cham, Switzerland, 2019.
  26. Pourhossein, F.; Mousavi, S.M.; Beolchini, F.; Martire, M.L. Novel green hybrid acidic-cyanide bioleaching applied for high recovery of precious and critical metals from spent light emitting diode lamps. J. Clean. Prod. 2021, 298, 126714.
  27. Marappa, N.; Ramachandran, L.; Dharumadurai, D.; Nooruddin, T. Recovery of Gold and Other Precious Metal Resources from Environmental Polluted E-waste Printed Circuit Board by Bioleaching Frankia. Int. J. Environ. Res. 2020, 14, 165–176.
  28. Arshadi, M.; Mousavi, S.M. Enhancement of simultaneous gold and copper extraction from computer printed circuit boards using Bacillus megaterium. Bioresour. Technol. 2015, 175, 315–324.
  29. Arshadi, M.; Yaghmaei, S. Bioleaching of basic metals from electronic waste pcbs. J. Min. Mech. Eng. 2020, 1, 41–50.
  30. Kumar, A.; Saini, H.S.; Kumar, S. Bioleaching of Gold and Silver from Waste Printed Circuit Boards by Pseudomonas balearica SAE1 Isolated from an e-Waste Recycling Facility. Curr. Microbiol. 2018, 75, 194–201.
  31. Utimura, S.K.; Rosario, C.G.A.; Botelho, A.B.; Tenório, J.A.S.; Espinosa, D.C.R. Bioleaching process for metal recovery from waste materials In Energy Technology 2017; Springer: Cham, Switzerland, 2017; pp. 283–290.
  32. Bryan, C.; Watkin, E.; McCredden, T.; Wong, Z.; Harrison, S.; Kaksonen, A. The use of pyrite as a source of lixiviant in the bioleaching of electronic waste. Hydrometallurgy 2014, 152, 33–43.
  33. Shin, D.; Jeong, J.; Lee, S.; Pandey, B.D.; Lee, J.-C. Evaluation of bioleaching factors on gold recovery from ore by cyanide-producing bacteria. Miner. Eng. 2013, 48, 20–24.
  34. Wang, F.; Zhao, Y.; Zhang, T.; Zhang, G.; Yang, X.; He, Y.; Wang, L.; Duan, C. Metals recovery from dust derived from recycling line of waste printed circuit boards. J. Clean. Prod. 2017, 165, 452–457.
  35. Wang, H.; Zhang, G.; Hao, J.; He, Y.; Zhang, T.; Yang, X. Morphology, mineralogy and separation characteristics of nonmetallic fractions from waste printed circuit boards. J. Clean. Prod. 2018, 170, 1501–1507.
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license; additional terms may apply. By using this site, you agree to the Terms and Conditions and Privacy Policy.
Upload a video for this entry
Information
Subjects: Engineering, Chemical
Contributors MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register :
Kundani Magoda
,
Lukhanyo Mekuto
View Times: 1.5K
Revisions: 2 times (View History)
Update Date: 28 Sep 2022
Table of Contents
    1000/1000
    Hot Most Recent
    ScholarVision Creations
    Feedback