Submitted Successfully!
To reward your contribution, here is a gift for you: A free trial for our video production service.
Thank you for your contribution! You can also upload a video entry or images related to this topic.
Version Summary Created by Modification Content Size Created at Operation
1
Rafael M. Santos
 -- 2467 2022-09-01 15:47:26 |
2 layout
Camila Xu
 + 1 word(s) 2468 2022-09-02 02:05:37 |

Video Upload Options

We provide professional Video Production Services to translate complex research into visually appealing presentations. Would you like to try it?
No, upload directly Yes

Confirm

Are you sure to Delete?
Yes No
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Araujo, F.S.M.;  Taborda-Llano, I.;  Nunes, E.B.;  Santos, R.M. Recycling and Reuse of Mine Tailings. Encyclopedia. Available online: https://encyclopedia.pub/entry/26797 (accessed on 16 November 2024).
Araujo FSM,  Taborda-Llano I,  Nunes EB,  Santos RM. Recycling and Reuse of Mine Tailings. Encyclopedia. Available at: https://encyclopedia.pub/entry/26797. Accessed November 16, 2024.
Araujo, Francisco S. M., Isabella Taborda-Llano, Everton Barbosa Nunes, Rafael M. Santos. "Recycling and Reuse of Mine Tailings" Encyclopedia, https://encyclopedia.pub/entry/26797 (accessed November 16, 2024).
Araujo, F.S.M.,  Taborda-Llano, I.,  Nunes, E.B., & Santos, R.M. (2022, September 01). Recycling and Reuse of Mine Tailings. In Encyclopedia. https://encyclopedia.pub/entry/26797
Araujo, Francisco S. M., et al. "Recycling and Reuse of Mine Tailings." Encyclopedia. Web. 01 September, 2022.
Recycling and Reuse of Mine Tailings
Edit
This entry is adapted from the peer-reviewed paper 10.3390/geosciences12090319

Mining is an important industry, accounting for 6.9% of global GDP. However, global development promotes accelerated demand, resulting in the accumulation of hazardous waste in land, sea, and air environments. It reached 7 billion tonnes of mine tailings generated yearly worldwide, and 19 billion solid tailings will be accumulated by 2025.

beneficiation slag flotation construction material

1. Introduction

The products of mining activity are essential not only for the subsistence of modern society but also for its improvement. It can be reflected on the impact of the absence of products in our daily lives, such as aircraft, ceramics, computers, building materials, medicines, agricultural products, asphalt, electronic products, metals, and paints [1][2]. Substantial mining activity is usually correlated with a region’s development, such that geologically privileged regions can count on a considerable part of their GDP from this activity [3]. For example, the European extractive industry includes more than 17,500 companies employing more than half a million people, and the development of the western United States was primarily due to the mining industry [4].
The activities involved in the intricate process of mining range from metal extraction (precious metals, ferrous alloys, and nonferrous materials), mineral beneficiation (gypsum, salt, kaolin, sulfur, and phosphate), fuels (hard coal, steam coal, petroleum, and coking coal), smelting, refining, and remediation [5][6][7]. The process of extraction produces significant amounts of wastes, typically consisting of (i) solid wastes in the form of waste rock, clouds of dust, sludges, and slags; (ii) liquid wastes in the form of wastewater and effluents; and (iii) gaseous emissions. Waste generated due to mining activity poses a serious issue due to the large amounts generated, and it is often associated with the risks posed by its storage and environmental management [8].
Global resources are finite, and greater extraction and use of virgin materials put significant pressure on the Earth’s resources, critically threatening future generational resource requirements [9]. Furthermore, population growth generates high consumption, putting pressures never seen before on natural resources. Consequently, the mining industry is generating vast quantities of tailings per year, representing one of the more prominent waste producers worldwide, reaching 7 billion tonnes per year [10]. Recent estimates point out that 19 billion solid tailings will be accumulated by 2025, and due to the structural complexity (chemical and physical), 20% cannot be recycled at all [11][12]. Among others, the consequences are apparent in the permanent impacts on soil exposure, vegetation, water sources (major impact), atmospheric pollution, and harming the lives of the population in its surroundings [1][13][14][15]. In this scenario, recycling mine tailings can help reduce the number of tailings for disposal. Circular economy, recyclability, recycling, and reuse have been identified as emerging solutions that can drive the multidimensional aspects of sustainability in the mining and metal extraction industries. As the residue is a heterogeneous, complex, and reactive mixture of minerals, each solution has its advantages and limitations of methods that are observed in waste feasibility studies.
In a feasibility study, waste characterization is initially done during mining, where the waste is stored above ground ore prior to treatment. At this phase, the concern is to determine if the residues will cause acid and metalliferous drainage (AMD), saline and sodic drainage, and leaching and mobilization of metals and toxic compounds. AMD is the formation and movement of highly acidic water rich in heavy metals and causes serious environmental problems around the world. It refers to effluents with low pH and high concentrations of hazardous and toxic elements that are generated when sulfide-rich wastes are exposed to the environment [16]. It is especially harmful when mining activity ceases, causing the water table to rise to normal levels, reacting with contaminated acid leachates that settle on rock walls when the AMD is present [17][18][19]. Australia, Canada, and China have 52,324; 10,129; and 5383 abandoned mines, respectively [20][21]. Neutralization, adsorption, ion exchange, membrane technology, biological mediation, and electrochemical remediation techniques have been used with relative success in tackling AMD [22][23][24][25][26]. As a disadvantage of these remediation techniques, they need to be applied for a long time due to the persistence of the reactivity of the elements that form AMD. As a result, prevention strategies have gained the attention of scholars due to their ability to limit the formation of AMD in the early stages [16].

2. Mining and Mineral Processing Wastes

Mining waste refers to all material that is extracted from the ground and processed to varying stages during the ore-processing and enrichment phases, having low or no economic value, as it is considered an unusable mineralized material and hence is stored or discarded rather than processed [27][28]. Usually, these products present themselves as fine suspended materials (1–600 μm), including dissolved metals and reagents, chemicals, and inorganic and organic additives, and are thus stored in the form of slurry in large man-made embankments, commonly referred to as tailings dams. Table 1 summarizes some types of mine waste, their classifications, and disposal options [29][30][31][32]. Table 2 shows the main applications of mine tailing identified in the articles.
Table 1. Characterization of mining waste [29][30][31][32].
Types of Mining Waste Physical Classification of Residues Environmental
Classification		 Disposal
Options
Rock waste (sterile)/Processing waste
  • Aqueous solutions
  • Wastewater
  • Particulate emissions
  • Water treatment sludge
  • Metallurgical slag
  • Atmospheric emissions
Acid mine drainage AMD		 Solid form
  • Waste rock, dust, sludge, and slag,
Liquid form
  • Liquid slag,
  • wastewater,
  • effluent
Gaseous form		 Chemical and mineralogical composition
Physical properties
Volume and surface occupied
Waste disposal method		 Tailings dams
Exhausted mine pits,
In piles, by dry stacking (suitable for areas of high seismic activity, for cold climates)
Disposal in paste
Underground backfilling
Submarine tailing disposal (STD)
Table 2. Tailings identified and their applications.
Types of Tailings Identified Application Number of Articles Analyzed
Iron ore; Copper; Platinum Group Metals; AMD; Zinc; Phosphogypsum; Slag; Red mud; Electric oven powders; Limestone powder; Fly ash and sewage sludge; Clay-based residues; Gold tailings; Marble; Coal combustion Construction materials 25
Manganese; Phosphogypsum; Platinum Group Metals; Combustion coal; Mine drainage sludge; Limestone powder; Phytoremediated tailings Agricultural
applications		 7
AMD-causing tailings Geopolymers 3
Chromium ore tailings Automobile catalytic converters; electronic materials; jewelry 3
Sand-based tailings; Platinum Group Metals; Coal combustion; Copper slag Landfills
and source
of rare earth elements		 3
According to Table 1, mining waste can present itself as rock waste from the bedrock that has been mined and transported out of the pit. However, it does not have a metal concentration of economic interest. It is stored in a landfill site near mining production because it is not economically viable to transport to another site [33]. In the processing phase, an ore mill is located at the extraction site to produce the first marketable products (metallic concentrates, sorted ore, and ingots); the residues of this stage are called processing waste. In this phase, various types of waste, such as aqueous solutions, wastewater, and slurry composed of fine-grained particles mixed with additives as well as products of chemical reactions are produced, which need to be stored in ponds for dewatering. Acid mine drainage occurs when acid, sulfate, and metal wastewater (effluents with a low pH and high toxic element concentration) are released from the ponds into the environment. The mine may continue to generate AMD for decades even after it ceases its operation. It is a huge source of concern due to its high environmental impact [16][34]. Still, in the processing stage, roasting is applied in sulfides to extract metals and remove impurities from the ore. Therefore, toxic gases like SO2 come out; this is an example of mine waste in the form of atmospheric emissions [35]. Still, one of the residues from the burning of sulfides is classified as slag, and it usually accumulates together with ashes in the vicinity of the production center, rather than in tailings ponds.
Disposal refers to accumulating large amounts of waste in a concentrated area or filling spaces in inoperative mines. Tailings dams are the most common method of deposition of fine tailings from ore grinding. Here, the idea is to dispose of the waste in an optimized, accessible, and environmentally safe way to allow its reprocessing in the future with the advancement of new technologies. Researchers will address some of them in this research. Underground backfilling is the most expensive method; it can only be used away from aquifers, and it is generally an option when geological stability and safety in operations are required. Submarine tailing disposal (STD) consists of the deposition of tailings in underwater marine bodies. Although there is a lot of criticism regarding the risks of the operation, and this has been increasing restrictions on the use of this solution over time [36][37], some researchers emphasize the benefit because the underwater conditions favor the geochemical stabilization of sulfide mineral residues [38].
According to Table 2, construction materials are the main applications of mine waste. In this sector, the most significant research is related to additive incorporation in cement for concrete block manufacturing [32][39], followed by brick manufacturing [40][41]. Agricultural products are in second place. Tailings that are suitable for use in agriculture must possess more similar physicochemical, compositional, and morphological characteristics, primarily in being rich in silicates, calcium, iron, and aluminum, among other beneficial elements, to be desirable for soil remediation and remineralization purposes. Several agricultural applications were observed in the articles, such as improving soil structure and crop yield [42], reducing soil erosion [43], treating acidic or metal-rich soils [44][45], or increasing available S and P concentrations in the soil [46].

3. Recovery of Mine Wastes through Reuse and Recycling

Reusing mine waste means using the material in its entirety without processing it in a new application. Recycling, on the other hand, extracts new valuable components from the waste or uses the waste as an input to the manufacture of a valuable product or application through processing [47]
In the different mining phases (exploration, transport, processing, and beneficiation), measures are taken to manage the generated waste. Different parameters such, as geographic, geological, hydrogeological, and climatological disparities, are decisive for addressing the strategies. In the long term, the research and development (R&D) sectors of companies work to improve the efficiency of current exploration methods (drilling and extraction), while in the short term, planners and decision makers embrace management tools, as shown in Figure 1, aiming to add value to the production liability and reducing the risk of the operation.
Figure 1. Mine waste hierarchy, adapted from [48].
The triangle of Figure 1 represents a mine waste hierarchy serving as a guide for prioritizing waste management practices, representing the most favored at the top to the least favored at the bottom. As seen, the minimization of the creation of mine waste is the preferred option, whereas disposal and treatment are the least preferred option. Reuse and recycling are the top feasible options in waste management [47].
For it to be possible to reuse waste, there must be a guarantee of the quality of the material compared to the original condition. In this strategy, there is no biological, physical, or physical-chemical transformation. The advantages are the saving of natural resources and manufacturing of cheaper products.
Recycling, which aims to reintroduce a waste after undergoing transformations in its properties to a particular production chain and serve as raw material for the manufacture of other products, has the following advantages: generation of employment, encouragement of scientific development, and reduction of the need for extraction of minerals in mines, among others. However, the most common practice used in conventional mining is treatment, disposal, and storage, the least favored option.
Despite the consolidation of technologies for treatment, disposal, and storage, there is a growing evolution regarding the use of mining waste recycling, especially in developed countries [49][50][51], where an increase in the number of research activities in this area leads to the belief that structural modification of this pyramid is possible in the future [52][53].
Table 3 shows the main recycling and reuse processes of residues, outlining the advantages and drawbacks of each. These residues are by-products of mining or have an indirect relationship in sharing similar properties and/or composition to mining waste, thus facing similar technical and economic feasibility challenges and opportunities.
Table 3. The relationship between types of mine waste and their main recovery techniques.
Type of Waste Main Recycling/Reuse
Processes		 Advantages Limitations Citing Articles
Metal waste Flotation Large-scale use; effective application in fine minerals; application in non-magnetic ores. Low recovery when mixed with mud. Wang et al., 2017 [54]; Ndlovu et al., 2017 [55]; Mackay et al., 2018 [56]; Shengo, 2021 [16]; Kalisz et al., 2022 [57].
Gravity Separation No use of chemical products; Relatively little environmental impact except for the disposal of sludge; Operational simplicity; Lower cost than flotation; Application in materials with larger particle size. Considerable loss of tailings when the method is dense type. Wang et al., 2017 [54]; Ndlovu et al., 2017 [55];
Rao et al., 2017 [58].
Magnetic Separation Low operational cost; Simplicity of equipment; A small amount in the release of waste that can affect the environment. Application only in waste with the presence of magnetic materials. Wang et al., 2017 [54]; Ndlovu et al., 2017 [55].
Solvent Extraction Economically and operationally feasible to execute in a short time; obtaining elements with high purity; effective in the selective extraction of heavy metals from industrial waste. Cost, degradation, volatility of solvents. Ndlovu et al., 2017 [55].
Biolixiviation (bioleaching) Microorganisms are used to obtain metals from low-grade ores; High technological potential; Recent technology. Slow rate; Climate dependent; Containment requirements. Duarte et al., 1990 [59]; Stanković et al., 2015 [60].
Amalgamation An efficient process for extracting larger particle size metals; Simple and inexpensive process. Limitation in recovering fine-grained materials. Pulungan et al., 2019 [61].
Gypsum waste Solvent Extraction Good selectivity; Obtaining elements with high purity. - Cánovas et al., 2018 [62]; Garg et al., 1996 [63].
Acid Leaching Low energy input; Low investment. Difficult separation of impurities; Presence of a high volume of acid. Cánovas et al., 2018 [62].
Metallurgical waste Pyrometallurgical Process Ability to receive zinc-based metallurgical powders. High thermal energy requirements; Additional steps to recover volatile metals from flue gas. Matinde et al., 2018 [29]; Ndlovu et al., 2017 [55]; Lin et al., 2017 [64].
Hydrometallurgical process Increasing use in recent years; Flexible and economical; Few environmental problems. Chemical consumption; Separations challenges. Matinde et al., 2018 [30]; Buzin et al., 2017 [65]; Ndlovu et al., 2017 [55]; Rodríguez et al. 2020 [66].
Electrometallurgical process Emerging technology; Smaller scale use. Materials of construction requirements. Hansen et al., 2012 [67].
Steel slag Dry Granulation More used; More effective; Less environmental pollution. Lower product value. Bisio, 1997 [68]; Barati et al., 2011 [69].
Air Blast Granulation Metals recovered with higher heterogeneity. Higher energy consumption. Bisio, 1997 [68]; Barati et al., 2011 [69].
Granulation with Liquid Slag Impact Reduction of energy intensity in the metal production process. The release of toxic gases; Little possibility of using vitreous slag in materials such as cement. Barati et al., 2011 [69].
It is important to emphasize that even if a residue is not directly linked to mineral exploration, it entered the subsequent analysis of this section because its use in the composition of mineral residues in recycling processes was identified in several analyzed articles, signaling its importance: for example, metallurgical waste in [31][70][71] and steel slag in [72][73][74][75].
It is also worth noting that the choice of procedure depends on the physical-chemical characteristics/properties of the residue, in addition to the operational cost to recover these materials from the waste and their environmental impact. Some techniques are already well consolidated, while others are still under development, requiring further research for their use to be on a larger scale.

References

  1. Cadeias, C.; Ávila, P.; Coelho, P.; Teixeira, J.P. Mining Activities: Health Impacts. In Encyclopedia of Environmental Health, 2nd ed.; Nriagu, J.O., Ed.; Elsevier Inc.: Amsterdam, The Netherlands, 2018; pp. 788–802.
  2. Hosseinpour, M.; Osanloo, M.; Azimi, Y. Evaluation of positive and negative impacts of mining on sustainable development by a semi-quantitative method. J. Clean. Prod. 2022, 366, 132955.
  3. Shavina, E.; Prokofev, V. Implementation of environmental principles of sustainable development in the mining region. E3S Web Conf. 2020, 174, 1–6.
  4. Garbarino, E.; Orveillon, G.; Saveyn, H.G. Management of waste from extractive industries: The new European reference document on the Best Available Techniques. Resour. Policy 2020, 69, 101782.
  5. Agboola, O.; Babatunde, D.E.; Fay+omi, O.S.I.; Sadiku, E.R.; Popoola, P.; Moropeng, L.; Yahaya, A.; Mamudu, O.A. A review on the impact of mining operation: Monitoring, assessment and management. Results Eng. 2020, 8, 100181.
  6. Vitti, C.; Arnold, B.J. The Reprocessing and Revalorization of Critical Minerals in Mine Tailings. Mining, Met. Explor. 2022, 39, 1–6.
  7. Agboola, A.A. Farming Systems in NIGERIA. Agronomy in Nigeria; Wiley and Sons: Hoboken, NJ, USA; University of Ibadan: Ibadan, Nigeria, 2000; pp. 25–34.
  8. Edraki, M.; Baumgartl, T.; Manlapig, E.; Bradshaw, D.; Franks, D.M.; Moran, C.J. Designing mine tailings for better environmental, social and economic outcomes: A review of alternative approaches. J. Clean. Prod. 2014, 84, 411–420.
  9. Luthra, S.; Mangla, S.K.; Sarkis, J.; Tseng, M.-L. Resources melioration and the circular economy: Sustainability potentials for mineral, mining and extraction sector in emerging economies. Resour. Policy 2022, 77, 1–4.
  10. Marín, O.A.; Kraslawski, A.; Cisternas, L.A. Estimating processing cost for the recovery of valuable elements from mine tailings using dimensional analysis. Miner. Eng. 2022, 184, 107629.
  11. Yoshizawa, S.; Tanaka, M.; Shekdar, A.V. Global trends in waste generation. In Recycling, Waste Treatment and Clean Technology; Gaballah, I., Mishar, B., Solozabal, R., Tanaka, M., Eds.; TMS Mineral, Metals and Materials Publishers: Madrid, Spain, 2004; pp. 1541–1552.
  12. Pappu, A.; Saxena, M.; Asolekar, S.R. Solid wastes generation in India and their recycling potential in building materials. Build. Environ. 2007, 42, 2311–2320.
  13. Galán, J.E. The benefits are at the tail: Uncovering the impact of macroprudential policy on growth-at-risk. J. Financ. Stab. 2020, 100831.
  14. Jiang, X.; Liu, W.; Xu, H.; Cui, X.; Li, J.; Chen, J.; Zheng, B. Characterizations of heavy metal contamination, microbial com-497 munity, and resistance genes in a tailing of the largest copper mine in China. Environ. Pollut. 2021, 280, 116947.
  15. Jawadand, S.; Randive, K. A Sustainable Approach to Transforming Mining Waste into Value-Added Products. In Innovations in Sustainable Mining; Springer: Cham, Switzerland, 2021; pp. 1–20.
  16. Shengo, L.M. Review of Practices in the Managements of Mineral Wastes: The Case of Waste Rocks and Mine Tailings. Wat. Air Soil Poll. 2021, 232, 273.
  17. Park, I.; Tabelin, C.B.; Jeon, S.; Li, X.; Seno, K.; Ito, M.; Hiroyoshi, N. A review of recent strategies for acid mine drainage prevention and mine tailings recycling. Chemosphere 2019, 219, 588–606.
  18. Mal, U.; Adhikari, K. Groundwater quality and hydrological stress induced by Lower Gondwana open cast coal mine. J. Earth Syst. Sci. 2021, 130, 32.
  19. Tatsuhara, T.; Arima, T.; Igarashi, T.; Tabelin, C.B. Combined neutralization–adsorption system for the disposal of hydrothermally altered excavated rock producing acidic leachate with hazardous elements. Eng. Geol. 2012, 139–140, 76–84.
  20. Lottermoser, B.G.; Ashley, P.M. Mobility and retention of trace elements in hardpan-cemented cassiterite tailings, north Queensland, Australia. Environ. Earth Sci. 2006, 50, 835–846.
  21. Mackasey, W.O. Abandoned Mines in Canada; Unpublished Report prepared for Mining Watch Canada; WOM Geological Associates, Inc.: Sudbury, OM, Canada, 2000.
  22. Chartrand, M.M.G. Electrochemical remediation of acid mine drainage. J. Appl. Electrochem. 2003, 33, 259–264.
  23. Wu, P.; Tang, C.; Liu, C.; Zhu, L.; Pei, T.; Feng, L. Geochemical distribution and removal of As, Fe, Mn and Al in a surface water system affected by acid mine drainage at a coalfield in Southwestern China. Environ. Earth Sci. 2008, 57, 1457–1467.
  24. Motsi, T.; Rowson, N.A.; Simmons, M.J.H. Adsorption of heavy metals from acid mine drainage by natural zeolite. Int. J. Miner. Process. 2009, 92, 42–48.
  25. Zagury, G.J.; Kulnieks, V.I.; Neculita, C.M. Characterization and reactivity assessment of organic substrates for sul-phate-reducing bacteria in acid mine drainage treatment. Chemosphere 2006, 64, 944–954.
  26. Zhong, C.M.; Xu, Z.L.; Fang, X.H.; Cheng, L. Treatment of acid mine drainage (AMD) by ultra-low pressure reverse osmosis and nanofiltration. Environ. Eng. Sci. 2007, 24, 1297–1306.
  27. Lottermoser, B.G. Mine Wastes: Characterization, Treatment and Environmental Impacts, 3rd ed.; Springer: Berlin/Heidelberg, Germany, 2010; 400p.
  28. BRGM. Management of Mining, Quarrying and Ore-Processing Waste in the European Union; 7 Figs., 17 Tables, 7 annexes, 1 CD-ROM (Collected data); BRGM: Orlèans, France, 2001; 79p.
  29. Hann, D. Copper tailings reprocessing. RMZ Mater. Geoenviron. 2021, 67, 1–10.
  30. Matinde, E.; Simate, G.; Ndlovu, S. Mining and metallurgical wastes: A review of recycling and re-use practices. J. S. Afr. Inst. Min. Met. 2018, 118, 825–844.
  31. Oluwasola, E.A.; Hainin, M.R.; Aziz, M.M.A. Evaluation of asphalt mixtures incorporating electric arc furnace steel slag and copper mine tailings for road construction. Transp. Geotech. 2015, 2, 47–55.
  32. Çelik, Ö.; Elbeyli, I.Y.; Piskin, S. Utilization of gold tailings as an additive in Portland cement. Waste Manag. Res. J. Sustain. Circ. Econ. 2006, 24, 215–224.
  33. Kossoff, D.; Dubbin, W.; Alfredsson, M.; Edwards, S.; Macklin, M.; Hudson-Edwards, K. Mine tailings dams: Characteristics, failure, environmental impacts, and remediation. Appl. Geochem. 2014, 51, 229–245.
  34. Johnson, D.B.; Hallberg, K.B. Acid mine drainage remediation options: A review. Sci. Total Environ. 2005, 338, 3–14.
  35. Shamsuddin, M. Physical Chemistry of Metallurgical Processes, 1st ed.; The Minerals, Metals & Materials Society; John Wiley & Sons, Inc.: Hoboken, NJ, USA, 2016.
  36. Submarine Tailings Disposal Toolkit. Available online: http://www.miningwatch.ca/files/01.STDtoolkit.intr_.pdf (accessed on 12 June 2014).
  37. MiningWatch Canada Webpage. Troubled Waters: How Mine Waste Dumping is Poisoning Our Oceans, Rivers, and Lakes. Available online: http://www.miningwatch.ca/news/troubled-watershow-mine-waste-dumping-poisoning-our-oceans-rivers-and-lakes (accessed on 12 June 2014).
  38. Dold, B. Submarine Tailings Disposal (STD)—A Review. Minerals 2014, 4, 642–666.
  39. Rashad, A.M. Phosphogypsum as a construction material. J. Clean. Prod. 2017, 166, 732–743.
  40. Zhang, L. Production of bricks from waste materials—A review. Constr. Build. Mater. 2013, 47, 643–655.
  41. Ahmari, S.; Zhang, L. Production of eco-friendly bricks from copper mine tailings through geopolymerization. Constr. Build. Mater. 2012, 29, 323–331.
  42. Tang, Z.; Lei, T.; Yu, J.; Shainberg, I.; Mamedov, A.I.; Ben-Hur, M.; Levy, G.J.; Mamedov, A.I. Runoff and Interrill Erosion in Sodic Soils Treated with Dry PAM and Phosphogypsum. Soil Sci. Soc. Am. J. 2006, 70, 679–690.
  43. Zhang, X.C.; Miller, W.P.; Nearing, M.A.; Norton, L.D. Effects of surface treatment on surface sealing, runoff, and interrill erosion. Trans. ASAE 1998, 41, 989–994.
  44. Takahashi, T.; Ikeda, Y.; Nakamura, H.; Nanzyo, M. Efficiency of gypsum application to acid Andosols estimated using aluminum release rates and plant root growth. Soil Sci. Plant Nutr. 2006, 52, 584–592.
  45. Rodríguez-Jordá, M.; Garrido, F.; García-González, M. Potential use of gypsum and lime rich industrial by-products for induced reduction of Pb, Zn and Ni leachability in an acid soil. J. Hazard Mater. 2010, 175, 762–769.
  46. Delgado, A.; Madrid, A.; Kassem, S.; Andreu, L.; del Campillo, M.C. Phosphorus fertilizer recovery from calcareous soils amended with humic and fulvic acids. Plant Soil 2002, 245, 277–286.
  47. Gorakhki, M.H.; Bareither, C.A. Sustainable Reuse of Mine Tailings and Waste Rock as Water-Balance Covers. Minerals 2017, 7, 128.
  48. Lottermoser, B. Recycling, Reuse and Rehabilitation of Mine Wastes. Elements 2011, 7, 405–410.
  49. Owen, J.; Kemp, D.; Lèbre, É.; Svobodova, K.; Murillo, G.P. Catastrophic tailings dam failures and disaster risk disclosure. Int. J. Disaster Risk Reduct. 2019, 42, 101361.
  50. Kumar, U.; Singh, D.N. E-waste management through regulations. Int. J. Eng. Invent. 2013, 3, 6–14.
  51. Azcue, J.M. Environmental Impacts of Mining Activities: Emphasis on Mitigation and Remedial Measures; Springer Science & Business Media: Berlin/Heidelberg, Germany, 2012.
  52. Cobîrzan, N.; Muntean, R.; Thalmaier, G.; Felseghi, R.-A. Recycling of Mining Waste in the Production of Masonry Units. Materials 2022, 15, 594.
  53. Aznar-Sánchez, J.A.; García-Gómez, J.J.; Velasco-Muñoz, J.F.; Carretero-Gómez, A. Mining Waste and Its Sustainable Management: Advances in Worldwide Research. Minerals 2018, 8, 284.
  54. Wang, H.-G.; Liu, W.; Jia, N.; Zhang, M.; Guo, M. Facile synthesis of metal-doped Ni-Zn ferrite from treated Zn-containing electric arc furnace dust. Ceram. Int. 2017, 43, 1980–1987.
  55. Ndlovu, S.; Simate, G.S.; Matinde, E. Waste Production and Utilization in the Metal Extraction Industry, 1st ed.; CRC Press: Boca Raton, FL, USA, 2017.
  56. Mackay, I.; Mendez, E.; Molina, I.; Videla, A.R.; Cilliers, J.J.; Brito-Parada, P.R. Dynamic froth stability of copper flotation tailings. Miner. Eng. 2018, 124, 103–107.
  57. Kalisz, S.; Kibort, K.; Mioduska, J.; Lieder, M.; Małachowska, A. Waste management in the mining industry of metals ores, coal, oil and natural gas—A review. J. Environ. Manag. 2021, 304, 114239.
  58. Rao, G.V.; Markandeya, R.; Kumar, R. Modeling and Optimisation of Multigravity Separator for Recovery of Iron Values from Sub Grade Iron Ore Using Three Level Three Factor Box Behnken Design. Int. J. Miner. Process. Extr. Met. 2017, 2, 46.
  59. Duarte, J.C.; Estrada, P.; Beaumont, H.; Sitima, M.; Pereira, P. Biotreatment of tailings for metal recovery. Mine Water Environ. 1990, 9, 193–206.
  60. Stankovic, S.; Moric, I.; Pavic, A.; Vojnovic, S.; Vasiljevic, B.; Cvetkovic, V. Bioleaching of copper from old flotation tailings samples (Copper Mine Bor, Serbia). J. Serbian Chem. Soc. 2015, 80, 391–405.
  61. Pulungan, L.; Pramusanto, P.; Hermana, F.A. The research of gold processing from tailings of iron sand processing from South Kalimantan by using amalgamation methods in West Java. J. Phys. Conf. Ser. 2019, 1375, 12047.
  62. Cánovas, C.R.; Macías, F.; Pérez-López, R.; Basallote, M.D.; Millán-Becerro, R. Valorization of wastes from the fertilizer industry: Current status and future trends. J. Clean. Prod. 2018, 174, 678–690.
  63. Garg, M.; Singh, M.; Kumar, R. Some aspects of the durability of a phosphogypsum-lime-fly ash binder. Constr. Build. Mater. 1996, 10, 273–279.
  64. Lin, X.; Peng, Z.; Yan, J.; Li, Z.; Hwang, J.-Y.; Zhang, Y.; Li, G.; Jiang, T. Pyrometallurgical recycling of electric arc furnace dust. J. Clean. Prod. 2017, 149, 1079–1100.
  65. de Buzin, P.J.W.K.; Heck, N.C.; Vilela, A.C.F. EAF dust: An overview on the influences of physical, chemical and mineral features in its recycling and waste incorporation routes. J. Mater. Res. Technol. 2017, 6, 194–202.
  66. Rodríguez, O.; Alguacil, F.J.; Baquero, E.E.; García-Díaz, I.; Fernández, P.; Sotillo, B.; López, F.A. Recovery of niobium and tantalum by solvent extraction from Sn–Ta–Nb mining tailings. RSC Adv. 2020, 10, 21406–21412.
  67. Hansen, H.; Rojo, A.; Ottosen, L. Electrodialytic Remediation of Copper Mine Tailings. Procedia Eng. 2012, 44, 2053–2055.
  68. Bisio, G. Energy recovery from molten slag and exploitation of the recovered energy. Energy 1997, 22, 501–509.
  69. Barati, M.; Esfahani, S.; Utigard, T. Energy recovery from high temperature slags. Energy 2011, 36, 5440–5449.
  70. Duan, W.; Yu, Q.; Wang, Z. Comprehensive Analysis of the Coal Particle in Molten Blast Furnace Slag To Recover Waste Heat. Energy Fuels 2017, 31, 8813–8819.
  71. Šajn, R.; Ristović, I.; Čeplak, B. Mining and Metallurgical Waste as Potential Secondary Sources of Metals—A Case Study for the West Balkan Region. Minerals 2022, 12, 547.
  72. Whitworth, A.J.; Vaughan, J.; Southam, G.; van der Ent, A.; Nkrumah, P.N.; Ma, X.; Parbhakar-Fox, A. Review on metal extraction technologies suitable for critical metal recovery from mining and processing wastes. Miner. Eng. 2022, 182, 107537.
  73. Kim, S.-K.; Yang, D.-H.; Rao, S.; Nam, C.-W.; Rhee, K.-I.; Sohn, J.-S. A new approach to the recycling of gold mine tailings using red mud and waste limestone as melting fluxes. Geosystem Eng. 2012, 15, 44–49.
  74. Lemougna, P.N.; Yliniemi, J.; Ismailov, A.; Levänen, E.; Tanskanen, P.; Kinnunen, P.; Röning, J.; Illikainen, M. Recycling lithium mine tailings in the production of low temperature (700–900 °C) ceramics: Effect of ladle slag and sodium compounds on the processing and final properties. Constr. Build. Mater. 2019, 221, 332–344.
  75. Choi, Y.W.; Kim, Y.J.; Choi, O.; Lee, K.M.; Lachemi, M. Utilization of tailings from tungsten mine waste as a substitution material for cement. Constr. Build. Mater. 2009, 23, 2481–2486.
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license; additional terms may apply. By using this site, you agree to the Terms and Conditions and Privacy Policy.
Upload a video for this entry
Information
Subjects: Mining & Mineral Processing
Contributors MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register :
Francisco S. M. Araujo
,
Isabella Taborda-Llano
,
Everton Barbosa Nunes
,
Rafael M. Santos
View Times: 2.1K
Revisions: 2 times (View History)
Update Date: 02 Sep 2022
Table of Contents
    1000/1000
    Hot Most Recent
    ScholarVision Creations
    Feedback