Submitted Successfully!
To reward your contribution, here is a gift for you: A free trial for our video production service.
Thank you for your contribution! You can also upload a video entry or images related to this topic.
Version Summary Created by Modification Content Size Created at Operation
1
Yaqi Li
 -- 2082 2022-07-19 12:00:32 |
2 format
Jason Zhu
 -3 word(s) 2079 2022-07-20 03:45:35 |

Video Upload Options

Do you have a full video?
Send video materials Upload full video

Confirm

Are you sure to Delete?
Yes No
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Li, Y.;  Guo, J.;  Pedersen, K.;  Gurevich, L.;  Stroe, D. Electrical Properties of Lithium-Ion Batteries. Encyclopedia. Available online: https://encyclopedia.pub/entry/25272 (accessed on 30 July 2024).
Li Y,  Guo J,  Pedersen K,  Gurevich L,  Stroe D. Electrical Properties of Lithium-Ion Batteries. Encyclopedia. Available at: https://encyclopedia.pub/entry/25272. Accessed July 30, 2024.
Li, Yaqi, Jia Guo, Kjeld Pedersen, Leonid Gurevich, Daniel-Ioan Stroe. "Electrical Properties of Lithium-Ion Batteries" Encyclopedia, https://encyclopedia.pub/entry/25272 (accessed July 30, 2024).
Li, Y.,  Guo, J.,  Pedersen, K.,  Gurevich, L., & Stroe, D. (2022, July 19). Electrical Properties of Lithium-Ion Batteries. In Encyclopedia. https://encyclopedia.pub/entry/25272
Li, Yaqi, et al. "Electrical Properties of Lithium-Ion Batteries." Encyclopedia. Web. 19 July, 2022.
Electrical Properties of Lithium-Ion Batteries
Edit
This entry is adapted from the peer-reviewed paper 10.3390/batteries8070072

Lithium-ion batteries have good performance and environmentally friendly characteristics, so they have great potential. However, lithium-ion batteries will age to varying degrees during use, and the process is irreversible. There are many aging mechanisms of lithium batteries. In order to better verify the internal changes of lithium batteries when they are aging, post-mortem analysis has been greatly developed. The state of health (SOH) of Li-ion batteries is usually assessed using two main aspects: the loss of capacity and the increase in impedance. In addition, different kinds of lithium-ion cells can be divided into full cells and half cells. Coin cells are a kind of represented half cells, which can be investigated by a coin cell tester, which are carried out in a climate chamber. Coin cells can also build from full cells to investigate the electrical performance of independent electrodes. The electrodes from full cells could be thoroughly rinsed three times with diethyl carbonate (DEC) to remove the deposition of the electrolyte and Li salt and then be pouched into a specific area to use as the positive electrode as the coin cell.

lithium-ion batteries state-of-health Electrical Properties

1. Introduction

With the rapid development of green energy solutions, such as electric vehicles (EVs) and renewable power generation, lithium-ion batteries (LIBs) attract a lot of interest these days. Lithium chemistry offers high electrode potential (−3.04 vs. standard hydrogen electrode), low molecular weight and small ionic and atomic radii, ensuring fast diffusion and possibility of intercalation or integration into crystalline lattice of various materials. This helped Li-based batteries to outperform other secondary batteries both in terms of highest power and energy density as well as substantial lifetime [1]. However, uncertainties related to cost, degradation and weak performance in extreme weather conditions slow down large-scale adoption of Li-batteries. In particular, to meet the requirements in electrical vehicle (EV) applications, Li-ion batteries need to exhibit large capacity, stable thermal properties and a long lifetime [2][3][4][5][6][7]. Thus, detailed understanding of Li-ion batteries degradation behavior and mechanisms becomes a focal point of current battery research.
The aging process of a battery can be monitored by performing charging and discharging cycles while measuring the electrochemical characteristics, e.g., impedance and capacity [8][9][10][11][12][13].
For years, the internal physical and chemical reactions of Li-ion batteries were investigated [14]. As accurate and advanced electrochemical analysis devices were invented, people gained a better understanding of the aging processes of different materials and structures the batteries were composed of. To quantify the battery health, the most common indicator or concept, used in the literature, is State-of-Health (SOH). The SOH indicates the specific performance and health status of a battery, at a certain point, compared to the pristine state of the same battery [15]. Although there is no clear definition of the SOH, different parameters of a battery can be used to describe the SOH, such as capacity and impedance, corresponding to the battery’s energy and power, respectively [16]. Then, the diagnosis and estimation of Battery SOH can be promoted to determine battery characteristic parameters. The monitoring gives a measure of SOH which decreases as the battery ages. The decrease in SOH cannot commonly be attributed to a particular physical or chemical mechanism occurring inside the battery, but rather a complicated interplay of various mechanisms [7][17][18][19][20].
With the development of the interdisciplinary approach to battery ageing, in addition to the traditional electrical properties curve-based method, post-mortem analysis has attracted a wide interest for battery SOH estimation and/or diagnostics. With these methods, the battery lifetime and SOH can be deduced from the morphology and composition changes observed in a disassembled cell. This approach can provide understanding of the ageing processes based on the observed chemical and physical changes and link them to changes in electrical characteristics. While several recent research have addressed the electrical diagnostics methods, a detailed research of post-mortem analysis methods is missing [21][22].

2. Open-Circuit-Voltage (OCV) Curve-Based Analysis

As the voltage of Li-ion batteries is mainly influenced by internal electrochemical reactions and also changes in a variety of aging conditions, many people are trying to employ health indicator (HI) to describe SOH. Thus, much research on SOH estimation is focused on appropriate HIs. In general, two models of the terminal voltage can be established by OCV and polarization voltage, reflecting thermodynamic and kinetic aspects. For OCV, this means measuring the terminal voltage while the battery is in the condition of an open circuit until it reaches the thermodynamic equilibrium state. In addition, the polarization refers to the deviation of the terminal voltage from the OCV. The OCV curve-based methods included two main parts, geometric features and electrical characteristics. It is essential to employ OCV to build a Li-ion batteries voltage model [21][23][24][25][26]. The geometric features-based method is a common way of the diagnostic methods, which can be used to detect aging mechanisms by focusing on OCV variation to realize the estimation of SOH. There are two main aging mechanism identification methods, incremental capacity analysis (ICA) and differential voltage analysis (DVA).
According to many studies, ICA has been employed to diagnose the battery aging mechanisms [10][27][28][29][30][31][32]. The incremental capacity (IC) curve is calculated by derivation of the voltage curve, which can reflect the electrochemical process in the charging procedure [33][34][35][36][37]. The analysis of the mechanism of battery aging is carried out by the position and shape of the peaks. For example, Yang et al. used IC curves to present the aging mechanisms.
The DVA method is also commonly applied in the aging mechanism identification [6][38][39]. Ira et al. found that lithium-capacity-consuming side reactions were mainly occurring at anodes [23].
For coin cells, OCV test are similar to the full cell [34]. Alexander et al. extracted coin cells from commercial Li-ion cells [39]. As the influence of the reassembly of the coin cells was not investigated clearly, they developed a method to compare the different parameters such as washing the electrode or changing the ratio of the electrolyte, which influenced the performance [40][41][42][43][44]. They used a BaSyTec Cell System to realize the formation and the cycling of coin cells. The cycling method of the cells are constant-current-constant-voltage (CCCV) in discharge and constant-current (CC) in discharge process.
Another study by the same group attempted to relate the characteristic features of interest (FOI) to the evolution of the IC curve and the mechanism of aging [45]. The result also proved that the principle of aging is the same between full cell and coin cell, which attributed to the original cells and the corresponding coin cells exhibited LLI at room temperature while an increasing trend of active materials loss at high temperatures. The three FOIs are studied for the IC analysis in coin cells. The general trend of the FOIs by the separated aging mechanisms was also discussed by Berecibar et al. [46]. They studied all the curves separately and considered independent parameters and combinations of different parameters. According to their results, LLI and LAM in negative and positive electrodes are exhibited, respectively.

3. Electrochemical Impedance Spectrum (EIS) Analysis

Electrochemical Impendence Spectrum (EIS) is a useful method to measure the degradation level and the state-of-health without opening the batteries. The EIS is applied to the open circuit as well as the stable DC polarization electrochemical system.
The EIS result is usually described by Nyquist plot, which involves the imaginary part (y axis) and the real part (x axis) of the impedance of the cells. The internal impedance of a cell is usually defined as a turning point at the low frequency area of EIS in a battery management system [13][47][48]. Fitting the Nyquist plot to the LIB equivalent circuit model allows for the modelling of battery dynamics [49][50][51][52]. Rohm stands for the voltage drops because of the conductivity dropping during aging, such as current collector, binder, electrode and electrolyte electronic particles. Rf stands for Rflim, which refers to passivating film resistance. The process of charge transfer and conduction through the passivation layer should be considered as two sub-circuits consisting of pure resistors and pure capacitor elements in parallel.
Daniel et al. investigated the amplitude alternating current impedance which was measured at the voltage of 3.72 V. They found that both cathode and anode exhibit capacitive tail frequencies which are higher than 10 kHz, middle frequencies (from 1 kHz to 1 Hz) show a semi-circular arc and a diffusion tail at low frequencies lower than 1 Hz [33]. According to their study, the tail at high frequencies area is the result from the interaction between the impedance analyzer and the electrochemical cell. The depression of the semicircle in the mid frequency range may be due to simultaneous electrochemical reactions on active particles inside the cells.
For coin cell, EIS has proven to be a strong technique for analyzing phenomena in Li-ion battery. EIS spectroscopy in principle allows the separation and quantification of several achievements to the whole cell impedance, such as charge transfer, diffusion, and electrolyte resistance at the solid/electrolyte interface. To separate the influence from anode and cathode, respectively, the reference electrode (RE) is introduced into the cell system, and the impedance is measured between the working electrode (WE) and RE, as well as between the counter electrode (CE) and RE. Locating the RE is not easy because the EIS spectrum is distorted for a particular three-electrode battery configuration and useful analysis of the data is difficult [53][54]. Two models were developed to simulate EIS spectra by Delacourt et al., the 2D mathematical model and the equivalent circuit model of button cell based on the finite-element method (FEM) [53][55]. Most of the simulations were performed using the FEM model, which is easier to be realized. The purpose of the equivalent circuit is to simply elucidate the origin of the impedance distortion effect, while preserving the basic characteristics of the 2D model.

4. Electrochemical Parameter-Based Methods

The electrochemical methods to investigate lithium-ion batteries are mainly divided into the following parameters: the intercalation rate of lithium electrode, the diffusion coefficient in the solid or liquid phase, and the change of resistance in the formation process of solid electrolyte interphase layers (SEI) and so on. [21][22][27][28][56].
Rujian et al. observed that the side reactions and deposits appeared not only on the SEI surface but also between the anode and separator [28]. On the basis of their investigations, they proposed a model to represent Li-ion cells degradation by using the aspects as the following: the volume fraction of the active anode accessible; the resistance of the SEI layers and the deposition layer; the diffusion coefficient of the electrolyte. These characteristic parameters are influenced by real experiments. They concluded that the degradation was mainly caused by the deposition of anode side reaction via different methods including SEM, XRD and XPS.

5. In Situ Operando Characterization

The degradation of battery performance is caused by both external factors (such as temperature, stress, and charging-discharging method) and internal factors (such as loss of lithium-ion, loss of active materials, and decomposition of electrolyte). Most of the current SOH estimation methods treat batteries as a black box for empirical fitting, overlooking the actual electrochemical meaning of the parameters. Therefore, an accurate aging evaluation algorithm, i.e., in situ operando characterization, must be based on comprehensive understanding of the internal aging mechanisms of Lithium-ion batteries.
Laisuo et al. have employed in operando energy dispersive X-ray diffraction (ED-XRD) measurements to monitor the evolution of LiCoO2 crystal structure during cycling [57]. The measurement process is illustrated. The first charge-discharge cycle of the pristine and Poly (3,4-ethylenedioxythiophene) (PEDOT)-coated LiCoO2 electrode, and the lower intensity is represented by blue, and the higher intensity is red. It is shown that the structural evolutions are different between the two electrodes during cycling, which in turn confirms that ED-XRD is a powerful technique to investigate the mechanical behavior and the structure change of battery electrodes during cycling, and it can better explain the capacity fading caused by changes in the internal structure during cycling without destructive methods.
Operando transmission X-ray microscopy (TXM) has also been employed to visualize the morphological evolution of the electrodes. Laisuo et al. monitored LiCoO2 electrodes during the over-lithiation test [58]. The images corresponding to five representative points on the curve are displayed as P1–P5. It is shown that during the over-lithiation, LiCoO2 particles and agglomerates are broken and eventually pulverized. Overall, larger particles showed stronger resistance to cracking, remained intact during most of the charging process and only started to crack at the end of the over-lithiation process. On the other hand, small particles fractured early. This example shows how in situ techniques help to improve understanding of the electro-chemo-mechanical behavior of electrodes during cycling and provides an easy way to estimate the SOH of lithium-ion batteries without destroying the batteries.

References

  1. Tarascon, J.-M.; Armand, M. Issues and Challenges Facing Rechargeable Lithium Batteries. Nature 2001, 414, 359–367.
  2. Yoon, W.-S.; Nam, K.-W.; Jang, D.; Chung, K.Y.; Cho, Y.-H.; Choi, S.; Hanson, J.C.; Yang, X.-Q. The Kinetic Effect on Structural Behavior of Mixed LiMn2O4–LiNi1/3Co1/3Mn1/3O2 Cathode Materials Studied by in Situ Time-Resolved X-ray Diffraction Technique. Electrochem. Commun. 2012, 15, 74–77.
  3. Kitao, H.; Fujihara, T.; Takeda, K.; Nakanishi, N.; Nohma, T. High-Temperature Storage Performance of Li-Ion Batteries Using a Mixture of Li-Mn Spinel and Li-Ni-Co-Mn Oxide as a Positive Electrode Material. Electrochem. Solid-State Lett. 2005, 8, A87.
  4. Kim, Y.; Lim, J.; Kang, S. Investigation on the Dissolution of Mn Ions from LiMn2O4 Cathode in the Application of Lithium Ion Batteries: First Principle Molecular Orbital Method. Int. J. Quantum Chem. 2013, 113, 148–154.
  5. Dai, Y.; Cai, L.; White, R.E. Capacity Fade Model for Spinel LiMn2O4Electrode. J. Electrochem. Soc. 2012, 160, A182–A190.
  6. Guo, J.; Li, Y.; Pedersen, K.; Stroe, D.-I. Lithium-Ion Battery Operation, Degradation, and Aging Mechanism in Electric Vehicles: An Overview. Energy 2021, 14, 5220.
  7. Daubinger, P.; Schelter, M.; Petersohn, R.; Nagler, F.; Hartmann, S.; Herrmann, M.; Giffin, G.A. Impact of Bracing on Large Format Prismatic Lithium-Ion Battery Cells during Aging. Adv. Energy Mater. 2022, 12, 2102448.
  8. Cordoba-Arenas, A.; Onori, S.; Guezennec, Y.; Rizzoni, G. Capacity and Power Fade Cycle-Life Model for Plug-in Hybrid Electric Vehicle Lithium-Ion Battery Cells Containing Blended Spinel and Layered-Oxide Positive Electrodes. J. Power Sources 2015, 278, 473–483.
  9. Vetter, J.; Novák, P.; Wagner, M.R.; Veit, C.; Möller, K.-C.; Besenhard, J.O.; Winter, M.; Wohlfahrt-Mehrens, M.; Vogler, C.; Hammouche, A. Ageing Mechanisms in Lithium-Ion Batteries. J. Power Sources 2005, 147, 269–281.
  10. Dubarry, M.; Liaw, B.Y.; Chen, M.-S.; Chyan, S.-S.; Han, K.-C.; Sie, W.-T.; Wu, S.-H. Identifying Battery Aging Mechanisms in Large Format Li Ion Cells. J. Power Sources 2011, 196, 3420–3425.
  11. Barré, A.; Deguilhem, B.; Grolleau, S.; Gérard, M.; Suard, F.; Riu, D. A Review on Lithium-Ion Battery Ageing Mechanisms and Estimations for Automotive Applications. J. Power Sources 2013, 241, 680–689.
  12. Schmalstieg, J.; Käbitz, S.; Ecker, M.; Sauer, D.U. A Holistic Aging Model for Li(NiMnCo)O2 Based 18650 Lithium-Ion Batteries. J. Power Sources 2014, 257, 325–334.
  13. Meng, J.; Cai, L.; Stroe, D.-I.; Ma, J.; Luo, G.; Teodorescu, R. An Optimized Ensemble Learning Framework for Lithium-Ion Battery State of Health Estimation in Energy Storage System. Energy 2020, 206, 118140.
  14. Rumberg, B.; Epding, B.; Stradtmann, I.; Kwade, A. Identification of Li Ion Battery Cell Aging Mechanisms by Half-Cell and Full-Cell Open-Circuit-Voltage Characteristic Analysis. J. Energy Storage 2019, 25, 100890.
  15. Rezvanizaniani, S.M.; Liu, Z.; Chen, Y.; Lee, J. Review and Recent Advances in Battery Health Monitoring and Prognostics Technologies for Electric Vehicle (EV) Safety and Mobility. J. Power Sources 2014, 256, 110–124.
  16. Waag, W.; Fleischer, C.; Sauer, D.U. Critical Review of the Methods for Monitoring of Lithium-Ion Batteries in Electric and Hybrid Vehicles. J. Power Sources 2014, 258, 321–339.
  17. Zhang, G.; Wei, X.; Han, G.; Dai, H.; Zhu, J.; Wang, X.; Tang, X.; Ye, J. Lithium Plating on the Anode for Lithium-Ion Batteries during Long-Term Low Temperature Cycling. J. Power Sources 2021, 484, 229312.
  18. Zhu, J.; Su, P.; Dewi Darma, M.S.; Hua, W.; Mereacre, L.; Liu-Théato, X.; Heere, M.; Sørensen, D.R.; Dai, H.; Wei, X.; et al. Multiscale Investigation of Discharge Rate Dependence of Capacity Fade for Lithium-Ion Battery. J. Power Sources 2022, 536, 231516.
  19. Kisters, T.; Kuder, J.; Töpel, A.; Langkemper, R.; Nau, S.; Schopferer, S. Strain-Rate Dependence of the Failure Behavior of Lithium-Ion Pouch Cells under Impact Loading. J. Energy Storage 2021, 41, 102901.
  20. Zhang, G.; Wei, X.; Chen, S.; Han, G.; Zhu, J.; Dai, H. Investigation the Degradation Mechanisms of Lithium-Ion Batteries under Low-Temperature High-Rate Cycling. ACS Appl. Energy Mater. 2022, 5, 6462–6471.
  21. Han, X.; Ouyang, M.; Lu, L.; Li, J. A Comparative Study of Commercial Lithium Ion Battery Cycle Life in Electric Vehicle: Capacity Loss Estimation. J. Power Sources 2014, 268, 658–669.
  22. Zhang, Q.; White, R.E. Capacity Fade Analysis of a Lithium Ion Cell. J. Power Sources 2008, 179, 793–798.
  23. Knap, V.; Stroe, D.-I. Effects of Open-Circuit Voltage Tests and Models on State-of-Charge Estimation for Batteries in Highly Variable Temperature Environments: Study Case Nano-Satellites. J. Power Sources 2021, 498, 229913.
  24. Han, X.; Ouyang, M.; Lu, L.; Li, J.; Zheng, Y.; Li, Z. A Comparative Study of Commercial Lithium Ion Battery Cycle Life in Electrical Vehicle: Aging Mechanism Identification. J. Power Sources 2014, 251, 38–54.
  25. Marongiu, A.; Nlandi, N.; Rong, Y.; Sauer, D.U. On-Board Capacity Estimation of Lithium Iron Phosphate Batteries by Means of Half-Cell Curves. J. Power Sources 2016, 324, 158–169.
  26. Birkl, C.R.; McTurk, E.; Roberts, M.R.; Bruce, P.G.; Howey, D.A. A Parametric Open Circuit Voltage Model for Lithium Ion Batteries. J. Electrochem. Soc. 2015, 162, A2271–A2280.
  27. Schmidt, A.P.; Bitzer, M.; Imre, Á.W.; Guzzella, L. Model-Based Distinction and Quantification of Capacity Loss and Rate Capability Fade in Li-Ion Batteries. J. Power Sources 2010, 195, 7634–7638.
  28. Fu, R.; Choe, S.-Y.; Agubra, V.; Fergus, J. Modeling of Degradation Effects Considering Side Reactions for a Pouch Type Li-Ion Polymer Battery with Carbon Anode. J. Power Sources 2014, 261, 120–135.
  29. Dubarry, M.; Liaw, B.Y. Identify Capacity Fading Mechanism in a Commercial LiFePO4 Cell. J. Power Sources 2009, 194, 541–549.
  30. Chen, K.; Zheng, F.; Jiang, J.; Zhang, W.; Jiang, Y.; Chen, K. Practical Failure Recognition Model of Lithium-Ion Batteries Based on Partial Charging Process. Energy 2017, 138, 1199–1208.
  31. Berecibar, M.; Gandiaga, I.; Villarreal, I.; Omar, N.; van Mierlo, J.; van den Bossche, P. Critical Review of State of Health Estimation Methods of Li-Ion Batteries for Real Applications. Renew. Sustain. Energy Rev. 2016, 56, 572–587.
  32. Pastor-Fernández, C.; Uddin, K.; Chouchelamane, G.H.; Widanage, W.D.; Marco, J. A Comparison between Electrochemical Impedance Spectroscopy and Incremental Capacity-Differential Voltage as Li-Ion Diagnostic Techniques to Identify and Quantify the Effects of Degradation Modes within Battery Management Systems. J. Power Sources 2017, 360, 301–318.
  33. Berecibar, M.; Garmendia, M.; Gandiaga, I.; Crego, J.; Villarreal, I. State of Health Estimation Algorithm of LiFePO4 Battery Packs Based on Differential Voltage Curves for Battery Management System Application. Energy 2016, 103, 784–796.
  34. Weng, C.; Cui, Y.; Sun, J.; Peng, H. On-Board State of Health Monitoring of Lithium-Ion Batteries Using Incremental Capacity Analysis with Support Vector Regression. J. Power Sources 2013, 235, 36–44.
  35. Weng, C.; Feng, X.; Sun, J.; Peng, H. State-of-Health Monitoring of Lithium-Ion Battery Modules and Packs via Incremental Capacity Peak Tracking. Appl. Energy 2016, 180, 360–368.
  36. Li, X.; Jiang, J.; Wang, L.Y.; Chen, D.; Zhang, Y.; Zhang, C. A Capacity Model Based on Charging Process for State of Health Estimation of Lithium Ion Batteries. Appl. Energy 2016, 177, 537–543.
  37. Riviere, E.; Venet, P.; Sari, A.; Meniere, F.; Bultel, Y. LiFePO4 Battery State of Health Online Estimation Using Electric Vehicle Embedded Incremental Capacity Analysis. In Proceedings of the 2015 IEEE Vehicle Power and Propulsion Conference (VPPC), Montreal, QC, Canada, 19–22 October 2015; pp. 1–6.
  38. Abraham, D.P.; Poppen, S.D.; Jansen, A.N.; Liu, J.; Dees, D.W. Application of a Lithium–Tin Reference Electrode to Determine Electrode Contributions to Impedance Rise in High-Power Lithium-Ion Cells. Electrochim. Acta 2004, 49, 4763–4775.
  39. Schmid, A.U.; Kurka, M.; Birke, K.P. Reproducibility of Li-Ion Cell Reassembling Processes and Their Influence on Coin Cell Aging. J. Energy Storage 2019, 24, 100732.
  40. Klett, M.; Eriksson, R.; Groot, J.; Svens, P.; Ciosek Högström, K.; Lindström, R.W.; Berg, H.; Gustafson, T.; Lindbergh, G.; Edström, K. Non-Uniform Aging of Cycled Commercial LiFePO4//Graphite Cylindrical Cells Revealed by Post-Mortem Analysis. J. Power Sources 2014, 257, 126–137.
  41. Waldmann, T.; Iturrondobeitia, A.; Kasper, M.; Ghanbari, N.; Aguesse, F.; Bekaert, E.; Daniel, L.; Genies, S.; Gordon, I.J.; Löble, M.W.; et al. Review—Post-Mortem Analysis of Aged Lithium-Ion Batteries: Disassembly Methodology and Physico-Chemical Analysis Techniques. J. Electrochem. Soc. 2016, 163, A2149–A2164.
  42. Waldmann, T.; Kasper, M.; Wohlfahrt-Mehrens, M. Optimization of Charging Strategy by Prevention of Lithium Deposition on Anodes in High-Energy Lithium-Ion Batteries—Electrochemical Experiments. Electrochim. Acta 2015, 178, 525–532.
  43. Birkl, C.R.; Roberts, M.R.; McTurk, E.; Bruce, P.G.; Howey, D.A. Degradation Diagnostics for Lithium Ion Cells. J. Power Sources 2017, 341, 373–386.
  44. Dubarry, M.; Truchot, C.; Liaw, B.Y. Synthesize Battery Degradation Modes via a Diagnostic and Prognostic Model. J. Power Sources 2012, 219, 204–216.
  45. Schmid, A.U.; Ridder, A.; Hahn, M.; Schofer, K.; Birke, K.P. Aging of Extracted and Reassembled Li-Ion Electrode Material in Coin Cells—Capabilities and Limitations. Batteries 2020, 6, 33.
  46. Berecibar, M.; Dubarry, M.; Omar, N.; Villarreal, I.; van Mierlo, J. Degradation Mechanism Detection for NMC Batteries Based on Incremental Capacity Curves. World Electr. Veh. J. 2016, 8, 350–361.
  47. Mussa, A.S.; Liivat, A.; Marzano, F.; Klett, M.; Philippe, B.; Tengstedt, C.; Lindbergh, G.; Edström, K.; Lindström, R.W.; Svens, P. Fast-Charging Effects on Ageing for Energy-Optimized Automotive LiNi1/3Mn1/3Co1/3O2/Graphite Prismatic Lithium-Ion Cells. J. Power Sources 2019, 422, 175–184.
  48. Pastor-Fernández, C.; Widanage, W.D.; Marco, J.; Gama-Valdez, M.; Chouchelamane, G.H. Identification and Quantification of Ageing Mechanisms in Lithium-Ion Batteries Using the EIS Technique. In Proceedings of the 2016 IEEE Transportation Electrification Conference and Expo (ITEC), Busan, Korea, 1–4 June 2016; pp. 1–6.
  49. Huang, J.; Ge, H.; Li, Z.; Zhang, J. Dynamic Electrochemical Impedance Spectroscopy of a Three-Electrode Lithium-Ion Battery during Pulse Charge and Discharge. Electrochim. Acta 2015, 176, 311–320.
  50. Zhao, J.; Wang, L.; He, X.; Wan, C.; Jiang, C. Determination of Lithium-Ion Transference Numbers in LiPF–PC Solutions Based on Electrochemical Polarization and NMR Measurements. J. Electrochem. Soc. 2008, 155, A292.
  51. Dong, T.K.; Kirchev, A.; Mattera, F.; Kowal, J.; Bultel, Y. Dynamic Modeling of Li-Ion Batteries Using an Equivalent Electrical Circuit. J. Electrochem. Soc. 2011, 158, A326.
  52. Itagaki, M.; Kobari, N.; Yotsuda, S.; Watanabe, K.; Kinoshita, S.; Ue, M. In Situ Electrochemical Impedance Spectroscopy to Investigate Negative Electrode of Lithium-Ion Rechargeable Batteries. J. Power Sources 2004, 135, 255–261.
  53. Delacourt, C.; Ridgway, P.L.; Srinivasan, V.; Battaglia, V. Measurements and Simulations of Electrochemical Impedance Spectroscopy of a Three-Electrode Coin Cell Design for Li-Ion Cell Testing. J. Electrochem. Soc. 2014, 161, A1253–A1260.
  54. Jiménez Gordon, I.; Grugeon, S.; Débart, A.; Pascaly, G.; Laruelle, S. Electrode Contributions to the Impedance of a High-Energy Density Li-Ion Cell Designed for EV Applications. Solid State Ion. 2013, 237, 50–55.
  55. Thomas-Alyea, K.E.; Newman, J.; Chen, G.; Richardson, T.J. Modeling the Behavior of Electroactive Polymers for Overcharge Protection of Lithium Batteries. J. Electrochem. Soc. 2004, 151, A509.
  56. Ramadesigan, V.; Chen, K.; Burns, N.A.; Boovaragavan, V.; Braatz, R.D.; Subramanian, V.R. Parameter Estimation and Capacity Fade Analysis of Lithium-Ion Batteries Using Reformulated Models. J. Electrochem. Soc. 2011, 158, A1048.
  57. Su, L.; Weaver, J.L.; Groenenboom, M.; Nakamura, N.; Rus, E.; Anand, P.; Jha, S.K.; Okasinski, J.S.; Dura, J.A.; Reeja-Jayan, B. Tailoring Electrode–Electrolyte Interfaces in Lithium-Ion Batteries Using Molecularly Engineered Functional Polymers. ACS Appl. Mater. Interfaces 2021, 13, 9919–9931.
  58. Su, L.; Choi, P.; Nakamura, N.; Charalambous, H.; Litster, S.; Ilavsky, J.; Reeja-Jayan, B. Multiscale Operando X-ray Investigations Provide Insights into Electro-Chemo-Mechanical Behavior of Lithium Intercalation Cathodes. Appl. Energy 2021, 299, 117315.
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license; additional terms may apply. By using this site, you agree to the Terms and Conditions and Privacy Policy.
Upload a video for this entry
Information
Subjects: Engineering, Electrical & Electronic
Contributors MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register :
Yaqi Li
,
Jia Guo
,
Kjeld Pedersen
,
Leonid Gurevich
,
Daniel-Ioan Stroe
View Times: 1.4K
Revisions: 2 times (View History)
Update Date: 20 Jul 2022
Table of Contents
    1000/1000
    Hot Most Recent
    Video Production Service
    Feedback