Submitted Successfully!
To reward your contribution, here is a gift for you: A free trial for our video production service.
Thank you for your contribution! You can also upload a video entry or images related to this topic.
Version Summary Created by Modification Content Size Created at Operation
1 + 3428 word(s) 3428 2021-12-08 07:04:22 |
2 Format change Meta information modification 3428 2021-12-08 07:23:40 | |
3 Format change Meta information modification 3428 2021-12-08 07:24:43 | |
4 Format Change + 9 word(s) 3437 2021-12-08 07:27:54 |

Video Upload Options

Do you have a full video?


Are you sure to Delete?
If you have any further questions, please contact Encyclopedia Editorial Office.
Vizureanu, P. Geopolymer Composites Designed for Water and Wastewater Treatment. Encyclopedia. Available online: (accessed on 18 June 2024).
Vizureanu P. Geopolymer Composites Designed for Water and Wastewater Treatment. Encyclopedia. Available at: Accessed June 18, 2024.
Vizureanu, Petrica. "Geopolymer Composites Designed for Water and Wastewater Treatment" Encyclopedia, (accessed June 18, 2024).
Vizureanu, P. (2021, December 08). Geopolymer Composites Designed for Water and Wastewater Treatment. In Encyclopedia.
Vizureanu, Petrica. "Geopolymer Composites Designed for Water and Wastewater Treatment." Encyclopedia. Web. 08 December, 2021.
Geopolymer Composites Designed for Water and Wastewater Treatment

Since the discovery of geopolymers four decades ago, they have come quite a long way successfully and gained attention, mostly due to the effortlessness for geo-synthesis with lesser emission of greenhouse gases (GHG). Their admirable properties, such as toughness, heat and fire resistance, refractory nature and radiation hardness, altogether make them promising for applications for radioactive waste containment, as well as for pozzolanic action, making them multi-functional. In realism, lots of industrial materials are derived using geopolymers. For example, fiber-based geopolymer composites are regarded as fire-resistant. Quite a lot of geopolymeric composites are positioned in metal tool coatings and the construction of cabinets of airplanes and buildings, with a view to trim down the intensity of inferno incidents. The polymeric chain-like structure of geopolymers contributes higher chemical resistance, lower shrinkage and enhanced resistance to abrasion with high early mechanical strength. This entry describes that applications and interaction of geopolymer.

geopolymers wastewater

1. Applications of Geopolymers for Water and Wastewater Treatment

Nowadays, geopolymers are regarded as versatile materials, which have drawn attention in scores of environmental applications, and hence, are being employed nearly in all fields of technology, for instance, in water and wastewater treatment as adsorbents or ion-exchangers, high-pressure membranes and filtration media, photo-catalysts, anti-microbial materials, pH buffers, carrier media in bioreactors and for the solidification or stabilization of water and wastewater treatment residues. The applications are not merely those; they can be employed as anti-bacterial materials following their incorporation with copper (Cu) or silver (Ag) in the course of ion exchange or supplementation of nanoparticles, namely, silver-silica nano-composites into the geopolymeric alumina-silicate matrix [1][2][3]. Thus, they are useful as anti-microbial binders with analogously modified plentiful zeolites to designate their potential usage for the disinfection of wastewaters or sub-surface water [4][5][6].
Since the discovery of geopolymers four decades ago, they have come quite a long way successfully [7] and gained attention, mostly due to the effortlessness for geo-synthesis with lesser emission of greenhouse gases (GHG) [8]. Their admirable properties, such as toughness, heat and fire resistance, refractory nature and radiation hardness, altogether make them promising for applications for radioactive waste containment, as well as for pozzolanic action, making them multi-functional. In realism, lots of industrial materials are derived using geopolymers. For example, fiber-based geopolymer composites are regarded as fire-resistant. Quite a lot of geopolymeric composites are positioned in metal tool coatings and the construction of cabinets of airplanes and buildings, with a view to trim down the intensity of inferno incidents [9]. The polymeric chain-like structure of geopolymers contributes higher chemical resistance, lower shrinkage and enhanced resistance to abrasion with high early mechanical strength [10].
At present, geopolymers are an emerging class of materials for the eco-benevolent refurbishment of decrepit infrastructures, recovery of marsh environments and sustainable reinforcement of structural amenities. The highly workable properties of geopolymers, such as water retention aptitude, when owning shear stress of ~80 Pa at a shear rate of 110 s1 and compressive strengths of ~40 MPa at 7 days curing, facilitate the tailoring of them. Furthermore, they possess attributes that make geopolymers a significant class of promising materials for the containment and capping of nuclear wastes perils [11]. Moreover, the development of geopolymer sorbents necessitates considerations for how to employ them in general practice. It is feasible to dose powdered sorbent constantly; however, then an added process phase is needed to separate the utilized sorbent, and operational costs may go higher. As a result, a choice of alternative methods is accessible to manufacture highly porous and permeable geopolymers, e.g., direct foaming, sacrificial template method, freeze casting, granulation or additive manufacturing (AM), i.e., 3D printing.

1.1. Geopolymers as Adsorbents or Ion-Exchangers

The key drivers for this emerging approach for the application of geopolymers as adsorbents or ion exchangers are their outstanding mechanical and chemical stability coupled with a fairly uncomplicated, lower carbon, low-energy, user-friendly and cost-effective manufacturing process of geopolymerization [12]. There exist numerous efficient and familiar wastewater treatments to get rid of heavy metal cations present in it, including adsorption [13][14][15], ion-exchange, photo-catalytic degradation, i.e., as photo-catalysts, membrane filtration (or separation) materials, chemical precipitation, bio-remediation sedimentation, pH adjustment agents, the solidification or stabilization of water treatment residues reverse and forward osmosis [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30]. Consequently, geopolymers offer viable alternatives to competing materials for water and wastewater treatment, such as conventional ceramics or synthetic zeolites, polymeric components in terms of cost, an assortment of choice, eco-impacts, and of course, performance.
In recent times, on account of the significant attributes, such as a simple method, low-cost, environ-friendly nature, higher competence and mild micro-spheres synthesis method, geopolymers are successfully developed and commonly used as adsorbents, inorganic membranes, catalysts and for the immobilization of dangerous metal ions. Adsorption is regarded as the most efficient, uncomplicated and widespread technique for water decontamination [31][32][33][34][35]. Undeniably, activated carbon is the standard adsorbent material and is well-known as the most utilized adsorbent for water and wastewater treatment with an excellent demonstration of higher adsorption competencies for the removal of heavy metal cations, but its use gets hindered due to its comparatively high cost [36]. Hence, in spite of the exceptional adsorption ability of this material, its higher production costing is the root cause of wide-ranging research for low-cost yet effective options in recent times. Significantly, the unique porous structure of geopolymers and the existence of negative charges on the aluminum-tetrahedra of the resulting gels, they can efficiently and successfully absorb metal ions, namely, Pb+2, Cu+2, Cd+2, Mg+2, Hg+2, Cr+3, etc. [37][38][39][40][41][42].
The performance of heavy metal adsorption by geopolymers relies mostly on the structures formulated by the geopolymer gels; nevertheless, owing to the presence of numerous inert crystalline phases in them, the clear-cut correlations among the geopolymeric gels and performance of adsorption by them cannot be verified all the time. The earlier research works deal with the hydrochloric acid (HCl) dissolution to verify the degree of reaction of geopolymerization, and as inert crystalline phases are insoluble in acid, the gels and other dissolved matters can be measured based on the mass alterations. The adsorbents in powder form may necessitate the support materials use, such as porous ceramics and polymer foams, [42] to permit their industrial utilization or a separation step, such as pressure filtration after wastewater treatment course of action, both being harmful to the wastewater treatment costing besides the rising complexity of the procedures. The geopolymers can fruitfully be used as green adsorbents or ion exchangers by manufacturing them with wastes as precursors extending a systematic solution for their disposal too. Thus, the adsorption using these environ-benign adsorbents is a superb and very much progressive technique for the elimination of not merely inorganic but also organic contaminants from aqueous mediums, particularly through geopolymers, which can be produced employing solid wastes as precursors [43].
The ever-increasing diverse wastes from various fields, such as fly ash, metakaolin or low-calcium alumina-silicate solid wastes, accumulating as landfills are not only hazardous to the environmental sustainability but are also resource-wasting and polluting water, soil, etc., with lots of negative impacts on the health of living beings, and can advantageously be used as precursor resources. For instance, fly ash (FA) is being used as higher value-added applications, viz., the synthesis of FA-ZnO enclosing nanofibers for adsorption and photo-catalytic degradation of organic dyes, etc. [44]. Furthermore, the production of geopolymers enables benefiting industrial, agricultural, etc., wastes containing alumina and silica to be utilized as a resource for precursors, such as fly ash, clay, slag, raw kaolin, metakaolin and rice husks. Lots of research works used rice husk as a precursor, considering it as a silicon source useful for preparing a range of geopolymers making the costing comparatively low. Moreover, their uses for disinfection made ground, gaining the geopolymer technology substantial attention from not only researchers but also industries for concentrating on cleaner manufacturing. This is an additional advantage to offer systematic disposal of all such kinds of wastes that can be used to design a geopolymer useful for water and wastewater treatment and reclamation as well [45]. These compounds raise quite remarkable questions about their surface and structure, e.g., the almost total exclusion of diffusion of sequestered metal ions and avoidance of issues linked to leaching of geopolymer adsorbents [46].
As referred, geopolymers are famous for occupying inter-crossed linked bonds with cationic ends on the surface, structurally permitting the entrapment of toxic and radioactive metals through charge balancing. On the other hand, the micro-structure of geopolymer in the nano-metric scale of 5 to 10 nm frequently consists of numerous pores inside a highly porous –Al–O–Si– repetitive unit, and these voids are probable to provide room for ionic integration, replacement and balances too. Extraordinarily, geopolymers own a key structural unit analogous to zeolites; Provis et al. [47] unveiled that they possess an amorphous gel phase and nano-crystalline zeolites agglomerates. According to them, a proposal has been put forward that the geopolymers and zeolites could be inter-converted under suitable conditions. Thus, the conversion of geopolymers into zeolites is regarded as an exceptional strategy since the well-organized recycling of solid wastes from industries and the economical production of costly zeolites can be recognized concurrently. Beforehand, Cui et al. [48] authenticated using a high-resolution transmission electron microscope and particular area electron diffraction that numerous nanometer-ordered structures were detected in the amorphous geopolymer (Al2O32SiO2Na2O7H2O), successfully acquiring the Na-A type molecular sieve from this geopolymer through a hydrothermal reaction. Afterward, a series of sodium (Na)-zeolites, including sodium (Na)-A, faujasite, sodium (Na)–P and sodium (Na)-X were attained via the hydrothermal alteration of geopolymers when sodium cations (Na+) were present, which displayed huge potential for membrane separation and bulky adsorbent utilizations. It is eminent that the development and nucleation of zeolites rely upon the concentration of alkali metal cations and their kind [49][50][51][52][53].
The zeolites, which are derived from geopolymers, are acquired from a solution of Na+ cations resulting in restraining their diversity. Hence, it is imperative to develop an extensive variety of zeolites from geopolymers for utilizations linking bulky adsorption and membrane separation. On the other hand, in a research study, Rossi blended a biomass fly ash as 75% with 25% geological natural metakaolin and used the mixture as a precursor for geo-synthesis through geopolymerization and achieved an end-product with a huge specific surface area of 56.35 m2/g together with a brilliant pressure resistance of up to ~10 MPa. Furthermore, a noteworthy improvement in adsorption competence and compressive strength was monitored in a study whereby the supplement of cork waste residue was made into metakaolin-based geopolymers [54]. Moreover, the existence of dyes in wastewaters is considered a somber crisis for ecology [55]. Cation-enclosing dyes, such as methylene blue or methylthioninium chloride with a formula C16H18ClN3S, is a salt that is cationic and used as a dye, mostly in the textile industry for cotton, wool and leather dyeing, paper and plastics, as well as furniture coloring. Methylene blue is very injurious to the health of living beings since it can cause blindness, allergy, abdominal disorders, asthma, etc. [25][55]. As a result, such dyes must be removed from aqueous solutions by means of ultra-filtration, photo-degradation or ion-exchange methods. Still, adsorption is one of the most efficient and affordable routes for water and wastewater treatments [56][57]. For the reason that it is a cationic dye, hence, positively charged; the application of geopolymers with negatively charged networks as adsorbents is the most promising solution in this context. Furthermore, the likelihood of the development of zeolites in the course of the geopolymerization of metakaolin can optimistically influence the procedures of adsorption.
The zeolite is portrayed by a higher selectivity headed for methylene blue [58]. The few modern research works are throwing light on the application of zeolite-type geopolymeric green nano-adsorbents considering their higher effectiveness, steadiness, trouble-free production system, exceptional binding characteristic and attractive lower costing [14][58][59][60][61]. They are found highly porous and can be manufactured at as low as room temperature through a simple process of geopolymerization among aluminum and silicon sources in an alkali medium [14][60]. Zeolites resembling geopolymers are appreciably useful for a variety of eco-friendly applications, viz., the taking away of heavy metals and photo-catalytic degradation of a few organic compounds, such as benzophenone, metronidazole, p-nitrophenol and eriochrome black T [62][63][64][65][66][67], along with some significant industrial uses, namely, diversion of methanol (CH3OH) to olefins and phenol hydroxylation for water and wastewater treatment.

1.2. Thermo-Dynamics of Adsorption

The necessary data with regard to the nature and thermo-dynamic viability of the adsorption progression can be obtained with the help of the thermo-dynamic parameters, standard change of entropy (DS0), change of standard free energy (DG0) and change of standard enthalpy (DH0). In the context of geopolymer adsorbents, the accounted DHO values of adsorption are commonly found as positive [68][17][28], designating with respect to the adsorption competence that it escalates at elevated temperatures. Nevertheless, one differing upshot as DH0 10 kJ/mol was found reported by Li et al. [69] in the case of elimination of methylene by fly ash-based geopolymer. This is additionally supported by the fact that the values of DS0 are constantly positive, signifying that the system entropy enhances are subsequent to the adsorption course of action [28][69][70]. This can be comprehended with the separation of hydrated water molecules from the metal ion, i.e., inner-sphere complexes are formulated, and specific adsorption takes place previous to the attachment to the surface sites of geopolymers, which is regarded as an energy-requiring procedure [68][28][70].

1.3. Adsorption of Radioisotopes

Fantastically, geopolymer composites are employed to adsorb a number of elements that have radioisotopes, viz., caesium (Cs), strontium (Sr), radium (Ra) and cobalt (Co). The elimination of radioisotopes from water has turned out to be progressively more significant in the aftermath of the incident of the accident at Fukushima nuclear site, Japan, in 2011 [71]. In the aqueous environment, caesium, which is highly soluble and stable, occurs as Cs. The radioactive isotope 137Cs is of great concern because it has a long half-life of 30.2 years. On the other hand, strontium is found present chiefly as Sr+2 in the aqueous environment and possesses quite a lot of radioactive isotopes. Of which, 90Sr with a half-life of 28.9 years is the most noteworthy [72]. Usually, all radium (Ra) isotopes are found present as Ra+2 in low salinity conditions with half-lives ranging between a few days and 1600 years. The metakaolin-based geopolymer is potentially effective for the adsorption of the caesium (Cs), and therefore, preferable to lead (Pb+2), copper (Cu+2), cadmium (Cd+2), nickel (Ni+2) and zinc (Zn+2). The adsorption competence is not influenced by the presence of sodium chloride (NaCl) up to 10 weight-% concentration. Chuang and Liao [73] adsorbed caesium (Cs+) ions by phosphate-based geopolymer enclosing potassium (K+), zinc (Zn+2) cations and Ferrocyanide anion [(Fe(CN)6)]−4. Lee et al. [74] utilized porous geopolymeric blocks manufactured with fly ash and blast furnace slag with a view for eliminating Cs+. Geopolymer composites are compared satisfactorily with so many other types of adsorbents for the removal of Cs+, which show the highest adsorption competence [71]. Chen et al. [75] investigated the elimination of Cs+, Sr+2 and Co+2 ions by metakaolin and fly ash-based geopolymer composites and achieved very high adsorption competencies. Moreover, it is possible to adsorb these ions with 0.1 M HCl, which suggests that the adsorbent could be regenerated [75]. Geopolymer composites using fly ash are reported to be potentially efficient for taking away cobalt (Co+2). At this juncture, it is interesting to note that both the radioisotopes and non-radioactive isotopes exhibit analogous aqueous chemistry. In the end, radium isotopes can be significantly removed by foamed geopolymers where there is an incorporation of barium sulfate (BaSO4), and the material is suggested to be employed as a passive filtration material. Thus, geopolymer composites can brilliantly remove different polluting ions efficiently.

2. Geopolymer Interaction Mechanism with Heavy Metals

Geopolymer removes heavy metals via an adsorption process in which heavy metal ions, or adsorbates, cling to the accessible binding surfaces of geopolymer. The adsorption isotherm is required to explore the nature of the interaction between geopolymer and heavy metal ions and to improve the application. In this scenario, the Langmuir and Freundlich models are typically used. Table 1 shows the adsorption of metals through a geopolymer and Table 2 represents adsorption of dyes in different types of geopolymers. Ge et al. [76] also showed that when MK-based porous geopolymer spheres were employed to remove Cu2+ the Langmuir model fit better than the Freundlich model. These data imply that Cu adsorption by FA-based standard geopolymers is monolayer. In the instance of Pb2+ removal, FA-based traditional geopolymers and found that the Langmuir model is more suited to represent the adsorption process than the Freundlich model [77]. As a result of the superior match of the Langmuir model seen in most studies, it is possible to conclude that heavy metal ion adsorption onto the geopolymer adsorbent is classified as monolayer. The interaction between Cu2+ and FA-based conventional geopolymer within a temperature range of 25–45℃ using both the Langmuir and Freundlich models and found that both models had a good correlation coefficient, however the Langmuir model fit better [76]. The removal effectiveness of Ni2+ using LD-slag based traditional geopolymer and discovered that the Langmuir model suited better than the Freundlich model, implying that the adsorption is monolayer adsorption [70]. On the other hand, classified the adsorption process based on the kind of bond produced, which are physisorption and chemisorption [78]. The former is preferable because the weak Van der Waal force allows for easy renewal of geopolymer as an adsorbent by simple or steam washing, chemical or thermal treatment. It has been observed that after 6–10 consecutive times of use, the adsorption capacity of geopolymer was lowered by roughly 1–10%. The latter, on the other hand, was observed to occur in the majority of the investigations, which is related to the fitting of the Langmuir isotherm. Fourier-transform infrared spectroscopy (FTIR) was used to understand the adsorption mechanism at the microscopic level, despite the fact that very little literature was available. Typically, wavenumbers ranging from 400 or 450 cm−1 to 4000 cm−1 were used. Furthermore, no significant change in the absorption band of Al–O–Si bending vibrations and Si–O–Si bending vibrations was seen following heavy metal adsorption [79]. However, following Mn2+ and Cu2+ adsorption, the adsorption band of H–O–H bending vibration at 1647 cm−1 was relocated to 1637 cm−1, and the peak at 1450 cm−1 was definitely shifted to 1431 cm−1 after Cu2+ adsorption. These spectral changes suggested that when Mn2+ and Cu2+ were attached to MK-based conventional geopolymer, a complexion with –OH groups occurred. When Ni2+ was adherent to LD-slag based conventional geopolymer, the peak of the spectra at 963 cm−1 got broader, and postulated that this was due to the formation of a metal ion layer surrounding the LD-slag based conventional geopolymer matrix. Another tiny signal was found at 1447 cm−1, showing that heavy metal ions may be chemically bound to the LD-slag-based conventional geopolymer matrix [70].
Table 1. Adsorption of metals through a geopolymer.
Source Material for Geopolymer Adsorbate Alkaline Activator Adsorption Capacity (mg/g) References
Metakaolin, Rice Husk Ash Crystal Violet KOH 276.9 [80]
Fly Ash Cd2+ NaOH, Na2SiO3 9.02 [81]
Pyrophyllite Cd2+ NaOH 7.82 [82]
Pyrophyllite Co2+ NaOH 7.1 [82]
Metakaolin Co2+ NaOH, Na2SiO3 69.23 [79]
Metakaolin Mn2+ NaOH, Na2SiO3 72.34 [79]
Pyrophyllite Ni2+ NaOH 7.28 [82]
Pyrophyllite Pb2+ NaOH 7.54 [82]
Ld Slag Zn2+ NaOH, Na2SiO3 86 [83]
Fly Ash, Blast Furnace Slag Cs+ NaOH, 15.24 [74]
Metakaolin Cu2+ KOH, silica fume 40 [84]
Metakaolin Cu2+ NaOH, Na2SiO3 62.5 [85]
Metakaolin Ni2+ NaOH, Na2SiO3 42.61 [79]
Blast Furnace Slag SO42− NaOH, Na2SiO3 119 [28]
Metakaolin Cd2+ NaOH, Na2SiO3 98.10 [86]
Metakaolin, Clinoptilolite Cr3+ NaOH, Na2SiO3 21.84 [86]
Fly Ash, Iron Ore Tailings Cu2+ NaOH, Na2SiO3 113.41 [18]
Metakaolin Cu2+ NaOH, Na2SiO3 44.73 [86]
Metakaolin, Clinoptilolite Pb2+ NaOH, Na2SiO3 261.22 [86]
Volcanic Tuff Zn2+ NaOH 14.83 [87]
Metakaolin, Clinoptilolite Zn2+ NaOH, Na2SiO3 35.88 [86]
Metakaolin, Al2O3 Methylene Blue H3PO4 4.26 [25]
Metakaolin Ca2+ NaOH 24 [88]
Fly Ash Cu2+ NaOH 152.3 [68]
Metakaolin Cu2+ NaOH 34.5 [88]
Metakaolin Pb2+ NaOH 45.1 [88]
Metakaolin Cu2+ NaOH, Na2SiO3 52.63 [76]
Fly Ash Methylene Blue NaOH, Na2SiO3 50.7 [89]
Metakaolin NH4+ NaOH, Na2SiO3 21.07 [90]
Blast Furnace Slag As(III) NaOH, Na2SiO3 0.52 [22]
Fly Ash Co2+ NaOH, Na2SiO3 66 [20]
Fly Ash Co2+ NaOH, Na2SiO3 59 [91]
Fly Ash Co2+ NaOH, Na2SiO3 52 [91]
Fly Ash Cu2+ NaOH, Na2SiO3 77 [20]
Blast Furnace Slag Ni2+ NaOH, Na2SiO3 4.42 [22]
Fly Ash Pb2+ NaOH, Na2SiO3 118.6 [17]
Fly Ash Pb2+ NaOH, Na2SiO3 6.34 [92]
Blast Furnace Slag Sb(III) NaOH, Na2SiO3 0.34 [90]
Metakaolin NH4+ NaOH, Na2SiO3 32 [93]
Table 2. Adsorption of dyes in different types of geopolymers.
Geopolymer as a Adsorbent Dye Adsorption Capacity (mg/g) Efficiency Degradation (%) References
TiO2 geopolymer composite MB 20.11 97 [94]
Phosphoric acid-based geopolymer MB 3.01   [25]
Fly ash geopolymer MB 37.04 [95]
Metakaolin-based geopolymer MB 43.48 - [96]
Magnetic geopolymer AR97 1814.27   [97]
Geopolymer CR 100 [98]
Fly ash-based geopolymer BY 36.364   [99]
Magnetic geopolymer AG 183.17   [100]
Metakaolin-based geopolymer MV10B 276.9   [80]
Metakaolin geopolymer MO 0.333 [101]
Magnetic geopolymer PR 39.21   [100]
Alkali-activated phosphorous slag BV 46.58   [102]
Fly ash geopolymer MB 92.79 [103]
Alkali-activated phosphorous slag MGO 46.36   [102]
Magnetic geopolymer AG16 400   [104]
Geopolymer MV 91.16 [105]
Methylene blue—MB, Basic yellow 2—BY, Acid green—AG, Procion red—PR, Basic violet—BV, Malachite green oxalate—MGO, Acid green 16—AG16, Methyl violet 10B—MV10B, Acid red 97—AR97, Methyl orange—MO, Crystal violet—CV, Congo red—CR, Methyl violet—MV.


  1. Hashimoto, S.; MacHino, T.; Takeda, H.; Daiko, Y.; Honda, S.; Iwamoto, Y. Antimicrobial activity of geopolymers ion exchanged with copper ions. Ceram. Int. 2015, 41, 13788–13792.
  2. O’Connor, S.J.; MacKenzie, K.J.D.; Smith, M.E.; Hanna, J.V. Ion exchange in the charge-balancing sites of aluminosilicate inorganic polymers. J. Mater. Chem. 2010, 20, 10234–10240.
  3. Adak, D.; Sarkar, M.; Maiti, M.; Tamang, A.; Mandal, S.; Chattopadhyay, B. Anti-microbial efficiency of nano silver-silica modified geopolymer mortar for eco-friendly green construction technology. RSC Adv. 2015, 5, 64037–64045.
  4. Akhigbe, L.; Ouki, S.; Saroj, D.; Lim, X.M. Silver-modified clinoptilolite for the removal of Escherichia coli and heavy metals from aqueous solutions. Environ. Sci. Pollut. Res. 2014, 21, 10940–10948.
  5. Dolic, M.B.; Rajakovic-Ognjanovic, V.N.; Strbac, S.B.; Rakocevic, Z.L.; Veljovic, D.N.; Dimitrijevic, S.I.; Rajakovic, L.V. The antimicrobial efficiency of silver activated sorbents. Appl. Surf. Sci. 2015, 357, 819–831.
  6. Johari, S.A.; Kalbassi, M.R.; Soltani, M.; Yu, I.J. Application of nanosilver-coated zeolite as water filter media for fungal disinfection of rainbow trout (Oncorhynchus mykiss) eggs. Aquac. Int. 2016, 24, 23–38.
  7. Davidovits, J. Solid Phase Synthesis of a Mineral Blockpolymer by Low Temperature Polycondensation of Aluminosilicate Polymers. In Proceedings of the International Symposium on Macromolecules, Stockholm, Sweden, 1976.
  8. Noor ul, A.; Faisal, M.; Muhammad, K.; Gul, S. Synthesis and characterization of geopolymer from bagasse bottom ash, waste of sugar industries and naturally available China clay. J. Clean. Prod. 2016, 129, 491–495.
  9. Salwa, S.S.M.; Mustafa, M.A.; Abdullah, M.M.A.B.; Kamarudin, H.; Ruzaidi, C.; Binhussain, M.; Syed Zuber, S.Z. Review on current geopolymer as a coating material. Aust. J. Basic Appl. Sci. 2013, 7, 246–257.
  10. Aizat, A.E.; Abdullah, M.M.A.B.; Ming, L.; Yong, H.; Kamarudin, H.; Aziz, A. Review of Geopolymer Materials for Thermal Insulating Applications. Key Eng. Mater. 2015, 660, 17–22.
  11. Perera, D.; Blackford, M.; Vance, R.; Hanna, V.E.; Finnie, K.J.; Nicholson, L. Geopolymers for the immobilization of radioactive waste. Mater. Res. Soc. Symp. Proc. 2004, 824, CC8.35.
  12. Bai, C.; Colombo, P. Processing, properties and applications of highly porous geopolymers: A review. Ceram. Int. 2018, 44, 16103–16118.
  13. Abdelrahman, E.A.; Hegazey, R.M. Exploitation of Egyptian insecticide cans in the fabrication of Si/Fe nanostructures and their chitosan polymer composites for the removal of Ni(II), Cu(II), and Zn(II) ions from aqueous solutions. Compos. Part B Eng. 2019, 166, 382–400.
  14. Abdelrahman, E.A.; Hegazey, R.M.; Alharbi, A. Facile synthesis of mordenite nanoparticles for efficient removal of Pb(II) ions from aqueous media. J. Inorg. Organomet. Polym. Mater. 2020, 30, 1369–1383.
  15. Khalifa, M.E.; Abdelrahman, E.A.; Hassanien, M.M.; Ibrahim, W.A. Application of mesoporous silica nanoparticles modified with Dibenzoylmethane as a novel composite for efficient removal of Cd(II), Hg(II), and Cu(II) ions from aqueous media. J. Inorg. Organomet. Polym. Mater. 2020, 30, 2182–2196.
  16. Horpibulsuk, S.; Suksiripattanapong, C.; Samingthong, W.; Rachan, R.; Arulrajah, A. Durability against wetting-drying cycles of water treatment sludge-fly ash geopolymer and water treatment sludge-cement and silty clay-cement systems. J. Mater. Civ. Eng. 2016, 28, 1–9.
  17. Liu, Y.; Yan, C.; Zhang, Z.; Wang, H.; Zhou, S.; Zhou, W. A comparative study on fly ash, geopolymer and faujasite block for Pb removal from aqueous solution. Fuel 2016, 185, 181–189.
  18. Duan, P.; Yan, C.; Zhou, W.; Ren, D. Development of fly ash and iron ore tailing based porous geopolymer for removal of Cu(II) from wastewater. Ceram. Int. 2016, 42, 13507–13518.
  19. Novais, R.M.; Gameiro, T.; Carvalheiras, J.; Seabra, M.P.; Tarelho, L.A.C.; Labrincha, J.A.; Capela, I. High pH buffer capacity biomass fly ash-based geopolymer spheres to boost methane yield in anaerobic digestion. J. Clean. Prod. 2018, 178, 258–267.
  20. Mužek, M.N.; Svilović, S.; Ugrina, M.; Zelić, J. Removal of copper and cobalt ions by fly ash-based geopolymer from solutions-equilibrium study, Desalin. Water Treat. 2016, 57, 10689–10699.
  21. Bumanis, G.; Rugele, K.; Bajare, D. The effect of alkaline material particle size on adjustment ability of buffer capacity. Medziagotyra 2015, 21, 405–409.
  22. Luukkonen, T.; Runtti, H.; Niskanen, M.; Tolonen, E.T.; Sarkkinen, M.; Kemppainen, K.; Rämö, J.; Lassi, U. Simultaneous removal of Ni(II), as(III), and Sb(III) from spiked mine effluent with metakaolin and blast-furnace-slag geopolymers. J. Environ. Manag. 2016, 166, 579–588.
  23. Gasca-Tirado, J.R.; Manzano-Ramírez, A.; Vazquez-Landaverde, P.A.; Herrera-Díaz, E.I.; Rodríguez-Ugarte, M.E.; Rubio-Ávalos, J.C.; Amigó-Borrás, V.; Chávez-Páez, M. Ion exchanged geopolymer for photocatalytic degradation of a volatile organic compound. Mater. Lett. 2014, 134, 222–224.
  24. Novais, R.M.; Seabra, M.P.; Labrincha, J.A. Porous geopolymer spheres as novel pH buffering materials. J. Clean. Prod. 2017, 143, 1114–1122.
  25. Khan, M.I.; Min, T.K.; Azizli, K.; Sufian, S.; Ullah, H.; Man, Z. Effective removal of methylene blue from water using phosphoric acid based geopolymers: Synthesis, characterizations and adsorption studies. RSC Adv. 2015, 5, 61410–61420.
  26. Xu, M.; He, Y.; Wang, C.; He, X.; He, X.; Liu, J.; Cui, X. Preparation and characterization of a self-supporting inorganic membrane based on metakaolin based geopolymers. Appl. Clay Sci. 2015, 115, 254–259.
  27. Ascensão, G.; Seabra, M.P.; Aguiar, J.B.; Labrincha, J.A. Red mud-based geopolymers with tailored alkali diffusion properties and pH buffering ability. J. Clean. Prod. 2017, 148, 23–30.
  28. Runtti, H.; Luukkonen, T.; Niskanen, M.; Tuomikoski, S.; Kangas, T.; Tynjälä, P.; Tolonen, E.T.; Sarkkinen, M.; Kemppainen, K.; Rämö, J.; et al. Sulphate removal over barium-modified blast-furnace-slag geopolymer. J. Hazard. Mater. 2016, 317, 373–384.
  29. Bumanis, G.; Bajare, D. The effect of porous alkali activated material composition on buffer capacity in bioreactors. Int. J. Chem. Nucl. Metall. Mater. Eng. 2014, 8, 1040–1046.
  30. Min Li, C.; He, Y.; Tang, Q.; Tuo Wang, K.; Min Cui, X.; Min Li, C.; He, Y.; Tang, Q.; Tuo Wang, K.; Min Cui, X. Study of the preparation of CdS on the surface of geopolymer spheres and photocatalyst performance. Mater. Chem. Phys. 2016, 178, 204–210.
  31. Li, Z.; Wang, L.; Meng, J.; Liu, X.; Xu, J.; Wang, F.; Brookes, P. Zeolite-supported nanoscale zero-valent iron: New findings on simultaneous adsorption of Cd(II), Pb (II), and as(III) in aqueous solution and soil. J. Hazard. Mater. 2018, 344, 1–11.
  32. Ji, Z.; Pei, Y. Immobilization efficiency and mechanism of metal cations (Cd2+, Pb2+ and Zn2+) and anions (AsO43− and Cr2O72−) in wastes-based geopolymer. J. Hazard. Mater. 2020, 384, 121290.
  33. Xie, W.M.; Zhou, F.P.; Bi, X.L.; Chen, D.D.; Li, J.; Sun, S.Y.; Liu, J.Y.; Chen, X.Q. Accelerated crystallization of magnetic 4A-zeolite synthesized from red mud for application in removal of mixed heavy metal ions. J. Hazard. Mater. 2018, 358, 441–449.
  34. Zhang, Y.J.; Han, Z.C.; He, P.Y.; Chen, H. Geopolymer-based catalysts for cost effective environmental governance: A review based on source control and end-of pipe treatment. J. Clean. Prod. 2020, 263, 121556.
  35. Huang, J.; Li, Z.; Zhang, J.; Zhang, Y.; Cui, X. In-situ synchronous carbonation and self-activation of biochar/geopolymer composite membrane: Enhanced catalyst for oxidative degradation of tetracycline in water. Chem. Eng. J. 2020, 397, 125528.
  36. Mestre, A.S.; Pires, R.A.; Aroso, I.; Fernandes, E.M.; Pinto, M.L.; Reis, R.L.; Andrade, M.A.; Pires, J.; Silva, S.P.; Carvalho, A.P. Activated carbons prepared from industrial pre-treated cork: Sustainable adsorbents for pharmaceutical compounds removal. Chem. Eng. J. 2014, 253, 408–417.
  37. Sanguanpak, S.; Wannagon, A.; Saengam, C.; Chiemchaisri, W.; Chiemchaisri, C. Porous metakaolin-based geopolymer granules for removal of ammonium in aqueous solution and anaerobically pretreated piggery wastewater. J. Clean. Prod. 2021, 297, 126643.
  38. Maleki, A.; Hajizadeh, Z.; Sharifi, V.; Emdadi, Z. A green, porous and eco-friendly magnetic geopolymer adsorbent for heavy metals removal from aqueous solutions. J. Clean. Prod. 2019, 215, 1233–1245.
  39. Lan, T.; Guo, S.; Li, X.; Guo, J.; Bai, T.; Zhao, Q.; Yang, W.; Li, P. Mixed precursor geopolymer synthesis for removal of Pb(II) and Cd(II). Mater. Lett. 2020, 274, 127977.
  40. Yu, Z.; Song, W.; Li, J.; Li, Q. Improved simultaneous adsorption of Cu(II) and Cr (VI) of organic modified metakaolin-based geopolymer. Arab. J. Chem. 2020, 13, 4811–4823.
  41. Naghsh, M.; Shams, K. Synthesis of a kaolin-based geopolymer using a novel fusion method and its application in effective water softening. Appl. Clay Sci. 2017, 146, 238–245.
  42. Zhang, Z.; Li, L.; He, D.; Ma, X.; Yan, C.; Wang, H. Novel self-supporting zeolitic block with tunable porosity and crystallinity for water treatment. Mater. Lett. 2016, 178, 151–154.
  43. Abdelrahman, E.A. Synthesis of zeolite nanostructures from waste aluminum cans for efficient removal of malachite green dye from aqueous media. J. Mol. Liq. 2018, 253, 72–82.
  44. Pant, B.; Ojha, G.P.; Kim, H.-Y.; Park, M.; Park, S.-J. Fly-ash-incorporated electrospun zinc oxide nanofibers: Potential material for environmental remediation. Environ. Pollut. 2019, 245, 163–172.
  45. Prachasaree, W.; Limkatanyu, S.; Hawa, A.; Samakrattakit, A. Development of equivalent stress block parameters for fly-ash-based geopolymer concrete. Arab. J. Sci. Eng. 2014, 39, 8549–8558.
  46. Cioffi, R.; Maffucci, L.; Santoro, L. Optimization of geopolymer synthesis bycalcination and polycondensation of a kaolinitic residue. Resour. Conserv. Recycl. 2003, 40, 27–38.
  47. Provis, J.L.; Lukey, G.C.; Deventer, J.S.J.V. Do geopolymers actually contain nanocrystalline zeolites? A reexamination of existing results. Chem. Mater. 2005, 17, 3075–3085.
  48. Cui, X.; He, Y.; Liu, L.; Chen, J. NaA zeolite synthesis from geopolymer precursor. MRS Commun. 2011, 1, 49–51.
  49. Luhar, S.; Chaudhary, S.; Luhar, I. Development of rubberized geopolymer concrete: Strength and durability studies. Constr. Build. Mater. 2019, 204, 740–753.
  50. Van, T.L.; Gobechiya, E.; Breynaert, E.; Martens, J.A.; Kirschhock, C.E. Alkaline cations directing the transformation of FAU zeolites into five different framework types. Chem. Commun. 2013, 49, 11737–11739.
  51. Azarshab, M.; Mohammadi, F.; Maghsoodloorad, H.; Mohammadi, T. Ceramic membrane synthesis based on alkali activated blast furnace slag for separation of water from ethanol. Ceram. Int. 2016, 42, 15568–15574.
  52. Wang, H.; Yan, C.; Li, D.; Zhou, F.; Liu, Y.; Zhou, C.; Komarneni, S. In situ transformation of geopolymer gels to self-supporting NaX zeolite monoliths with excellent compressive strength. Microporous Mesoporous Mater. 2017, 261, 164–169.
  53. Tang, Q.; Ge, Y.Y.; Wang, K.T.; He, Y.; Cui, X.M. Preparation of porous P-type zeolite spheres with suspension solidification method. Mater. Lett. 2015, 161, 558–560.
  54. Sudagar, A.; Andrejkovicová, S.; Patinha, C.; Velosa, A.; Mcadam, A.; Silva, E.F.; Rocha, F. A novel study on the influence of cork waste residue on metakaolin zeolite based geopolymers. Appl. Clay Sci. 2018, 152, 196–210.
  55. Sivalingam, S.; Kella, T.; Maharana, M.; Sen, S. Efficient sono-sorptive elimination of methylene blue by fly ash-derived nano-zeolite X: Process optimization, isotherm and kinetic studies. J. Clean. Prod. 2019, 208, 1241–1254.
  56. Novais, R.M.; Ascensao, G.; Tobaldi, D.M.; Seabra, M.P.; Labrincha, J.A. Biomass fly ash geopolymer monoliths for effective methylene blue removal from wastewaters. J. Clean. Prod. 2018, 171, 783–794.
  57. Mouni, L.; Belkhiri, L.; Bollinger, J.C.; Bouzaza, A.; Assadi, A.; Tirri, A.; Dahmoune, F.; Madani, K.; Remini, H. Removal of Methylene Blue from aqueous solutions by adsorption on Kaolin: Kinetic and equilibrium studies. Appl. Clay Sci. 2018, 153, 38–45.
  58. Sapawe, N.; Jalil, A.A.; Triwahyono, S.; Shah, M.I.A.; Jusoh, R.; Salleh, N.F.M.; Hameed, B.H.; Karim, A.H. Cost-effective microwave rapid synthesis of zeolite NaA for removal of methylene blue. Chem. Eng. J. 2013, 229, 388–398.
  59. Subaihi, A.; Morad, M.; Hameed, A.M.; Alharbi, A.; Abou, Y.G.; Algethami, F.K.; Hegazey, R.M.; Abdelrahman, E.A. Studying some analytical parameters affecting the removal of Mn(II) ions from aqueous media using facilely synthesised analcime. Int. J. Environ. Anal. Chem. 2020, 1–12.
  60. Nasiri-ardali, M.; Nezamzadeh-ejhieh, A. A Comprehensive Study on the Kinetics and Thermodynamic Aspects of Batch and Column Removal of Pb(II) by the Clinoptilolite—Glycine Adsorbent. Mater. Chem. Phys. 2020, 240, 122142.
  61. al Sadat Shafiof, M.; Nezamzadeh-Ejhieh, A. A comprehensive study on the removal of Cd(II) from aqueous solution on a novel pentetic acid-clinoptilolite nanoparticles adsorbent: Experimental design, kinetic and thermodynamic aspects. Solid State Sci. 2020, 99, 106071.
  62. Derikvandi, H.; Nezamzadeh-Ejhieh, A. Increased photocatalytic activity of NiO and ZnO in photodegradation of a model drug aqueous solution: Effect of coupling, supporting, particles size and calcination temperature. J. Hazard. Mater. 2017, 321, 629–638.
  63. Derikvandi, H.; Nezamzadeh-Ejhieh, A. Comprehensive study on enhanced photocatalytic activity of heterojunction ZnS-NiS/zeolite nanoparticles: Experimental design based on response surface methodology (RSM), impedance spectroscopy and GC-MASS studies. J. Colloid Interface Sci. 2017, 490, 652–664.
  64. Tamiji, T.; Nezamzadeh-Ejhieh, A. Sensitive voltammetric determination of bromate by using ion-exchange property of a Sn(II)-clinoptilolite-modified carbon paste electrode. J. Solid State Electrochem. 2019, 23, 143–157.
  65. Nezamzadeh-Ejhieh, A.; Khorsandi, M. Photodecolorization of Eriochrome Black T using NiS-P zeolite as a heterogeneous catalyst. J. Hazard. Mater. 2010, 176, 629–637.
  66. Esmaili-Hafshejani, J.; Nezamzadeh-Ejhieh, A. Increased photocatalytic activity of Zn(II)/Cu(II) oxides and sulfides by coupling and supporting them onto clinoptilolite nanoparticles in the degradation of benzophenone aqueous solution. J. Hazard. Mater. 2016, 316, 194–203.
  67. Babaahamdi-Milani, M.; Nezamzadeh-Ejhieh, A. A comprehensive study on photocatalytic activity of supported Ni/Pb sulfide and oxide systems onto natural zeolite nanoparticles. J. Hazard. Mater. 2016, 318, 291–301.
  68. Al-Harahsheh, M.S.; Al Zboon, K.; Al-Makhadmeh, L.; Hararah, M.; Mahasneh, M. Fly ash based geopolymer for heavy metal removal: A case study on copper removal. J. Environ. Chem. Eng. 2015, 3, 1669–1677.
  69. Li, L.; Wang, S.; Zhu, Z. Geopolymeric adsorbents from fly ash for dye removal from aqueous solution. J. Colloid Interface Sci. 2006, 300, 52–59.
  70. Sarkar, C.; Basu, J.K.; Samanta, A.N. Removal of Ni2+ Ion from waste water by geopolymeric adsorbent derived from LD Slag. J Water Proc. Eng. 2017, 17, 237–244.
  71. Liu, X.; Chen, G.R.; Lee, D.J.; Kawamoto, T.; Tanaka, H.; Chen, M.L.; Luo, Y.K. Adsorption removal of cesium from drinking waters: A mini review on use of biosorbents and other adsorbents. Bioresour. Technol. 2014, 160, 142–149.
  72. Guille’n, F.J.; Baeza, A.; Salas, A. Strontium. In Radionuclides in the Environment; Atwood, D.A., Ed.; Wiley: Chichester, UK, 2010; pp. 79–96.
  73. Chuang, L.; Liao, C. Sorption of cesium using KZnFc on phosphoric acid-based geopolymer. Ceram. Silik. 2015, 59, 125–134.
  74. Lee, N.K.; Khalid, H.R.; Lee, H.K. Adsorption characteristics of cesium onto mesoporous geopolymers containing nanocrystalline zeolites. Microporous Mesoporous Mater. 2017, 242, 238–244.
  75. Chen, Y.L.; Tong, Y.Y.; Pan, R.W.; Tang, J. The research on adsorption behaviors and mechanisms of geopolymers on Sr2+, Co2+ and Cs+1,2. Adv. Mater. Res. 2013, 704, 313–318.
  76. Ge, Y.; Cui, X.; Kong, Y.; Li, Z.; He, Y.; Zhou, Q. Porous geopolymeric spheres for removal of Cu(II) from aqueous solution: Synthesis and evaluation. J. Hazard. Mater. 2015, 283, 244–251.
  77. Al-Zboon, K.; Al-Harahsheh, M.S.; Hani, F.B. Fly ash-based geopolymer for Pb removal from aqueous solution. J. Hazard. Mater. 2011, 188, 414–421.
  78. Nergis, D.D.B.; Vizureanu, P.; Ardelean, I.; Sandu, A.V.; Corbu, O.C.; Matei, E. Revealing the Influence of Microparticles on Geopolymers’ Synthesis and Porosity. Materials 2020, 13, 3211.
  79. Kara, I.; Tunc, D.; Sayin, F.; Akar, S.T. Study on the performance of metakaolin based geopolymer for Mn(II) and Co(II) removal. Appl. Clay Sci. 2018, 161, 184–193.
  80. Barbosa, T.R.; Foletto, E.L.; Dotto, G.L.; Jahn, S.L. Preparation of mesoporous geopolymer using metakaolin and rice husk ash as synthesis precursors and its use as potential adsorbent to remove organic dye from aqueous solutions. Ceram. Int. 2018, 44, 416–423.
  81. Onutai, S.; Kobayashi, T.; Thavorniti, P.; Jiemsirilers, S. The adsorption of cadmium ions on fly ash based geopolymer particles. In Key Engineering Materials (KEM); Trans Tech Publications Ltd.: Kapellweg, Switzerland, 2018; Volume 766, pp. 65–70.
  82. Panda, L.; Rath, S.S.; Rao, D.S.; Nayak, B.B.; Das, B.; Misra, P.K. Thorough understanding of the kinetics and mechanism of heavy metal adsorption onto a pyrophyllite mine waste based geopolymer. J. Mol. Liq. 2018, 263, 428–441.
  83. Sarkar, C.; Basu, J.K.; Samanta, A.N. Synthesis of mesoporous geopolymeric powder from LD slag as superior adsorbent for Zinc (II) removal. Adv. Powder Technol. 2018, 29, 1142–1152.
  84. Singhal, A.; Gangwar, B.P.; Gayathry, J.M. CTAB modified large surface area nanoporous geopolymer with high adsorption capacity for copper ion removal. Appl. Clay. Sci. 2017, 150, 106–114.
  85. Ge, Y.; Cui, X.; Liao, C.; Li, Z. Facile fabrication of green geopolymer/alginate hybrid spheres for efficient removal of Cu (II) in water: Batch and column studies. Chem. Eng. J. 2017, 311, 126–134.
  86. Andrejkovicova, S.; Sudagar, A.; Rocha, J.; Patinha, C.; Hajjaji, W.; da Silva, E.F.; Velosa, A.; Rocha, F. The effect of natural zeolite on microstructure, mechanical and heavy metals adsorption properties of metakaolin based geopolymers. Appl. Clay Sci. 2016, 126, 141–152.
  87. Al-Zboon, K.; Al-smadi, B.M.; Al-Khawaldh, S. Natural volcanic tuff-based geopolymer for Zn removal: Adsorption isotherm, kinetic, and thermodynamic study. Water Air Soil Pollut. 2016, 227, 1–22.
  88. Tang, Q.; Ge, Y.Y.; Wang, K.T.; He, Y.; Cui, X.M. Preparation and characterization of porous metakaolin-based inorganic polymer spheres as an adsorbent. Mater. Des. 2015, 88, 1244–1249.
  89. Liu, Y.; Yan, C.; Zhang, Z.; Gong, Y.; Wang, H.; Qiu, X. A facile method for preparation of floatable and permeable fly ash-based geopolymer block. Mater. Lett. 2016, 185, 370–373.
  90. Luukkonen, T.; Sarkkinen, M.; Kemppainen, K.; Rämö, J.; Lassi, U. Metakaolin geopolymer characterization and application for ammonium removal from model solutions and landfill leachate. Appl. Clay Sci. 2016, 119, 266–276.
  91. Muzek, M.N.; Svilovic, S.; Zelic, J. Kinetic studies of cobalt ion removal from aqueous solutions using fly ash-based geopolymer and zeolite NaX as sorbents. Sep. Sci. Technol. 2016, 51, 2868–2875.
  92. Novais, R.M.; Buruberri, L.H.; Seabra, M.P.; Labrincha, J.A. Novel porous fly-ash containing geopolymer monoliths for lead adsorption from wastewaters. J. Hazard. Mater. 2016, 318, 631–640.
  93. Luukkonen, T.; Věžníková, K.; Tolonen, E.T.; Runtti, H.; Yliniemi, J.; Hu, T.; Kemppainen, K.; Lassi, U. Removal of ammonium from municipal wastewater with powdered and granulated metakaolin geopolymer. Environ. Technol. 2018, 39, 414–423.
  94. Falah, M.; MacKenzie, K.J.; Knibbe, R.; Page, S.J.; Hanna, J.V. New composites of nanoparticle Cu (I) oxide and titania in a novel inorganic polymer (geopolymer) matrix for destruction of dyes and hazardous organic pollutants. J. Hazard. Mater. 2016, 318, 772–782.
  95. El Alouani, M.; Alehyen, S.; El Achouri, M.; Taibi, M. Removal of Cationic Dye—Methylene Blue—From Aque Ous Solution by Adsorption on Fly Ash—Based Geopolymer. J. Mater. Environ. Sci. 2018, 9, 32–46.
  96. El Alouani, M.; Alehyen, s.; El Achouri, M.; Taibi, M. Preparation, characterization, and application of metakaolin-based geopolymer for removal of methylene blue from aqueous solution. J. Chem. 2019, 2019, 4212901.
  97. Netto, M.S.; Rossatto, D.L.; Jahn, S.L.; Mallmann, E.S.; Dotto, G.L.; Foletto, E.L. Preparation of a novel magnetic geopolymer/zero–valent iron composite with remarkable adsorption performance towards aqueous Acid Red 97. Chem. Eng. Commun. 2020, 207, 1048–1061.
  98. Zhang, Y.J.; Liu, L.C.; Ni, L.L.; Wang, B.L. A facile and low-cost synthesis of granulated blast furnace slag-based cementitious material coupled with Fe2O3 catalyst for treatment of dye wastewater. Appl. Catal. B Environ. 2013, 138, 9–16.
  99. Acisli, O.; Acar, I.; Khataee, A. Preparation of a fly ash-based geopolymer for removal of a cationic dye: Isothermal, kinetic and thermodynamic studies. J. Ind. Eng. Chem. 2020, 83, 53–63.
  100. Hua, P.; Sellaoui, L.; Franco, D.; Netto, M.S.; Dotto, G.L.; Bajahzar, A.; Belmabrouk, H.; Bonilla-Petriciolet, A.; Li, Z. Adsorption of acid green and procion red on a magnetic geopolymer based adsorbent: Experiments, characterization and theoretical treatment. Chem. Eng. J. 2020, 383, 123113.
  101. Fumba, G.; Essomba, J.S.; Tagne, G.M.; Nsami, J.N.; élibi, P.D.B.B.; Mbadcam, J.K. Equilibrium and kinetic adsorption studies of methyl orange from aqueous solutions using kaolinite, metakaolinite and activated geopolymer as low cost adsorbents. J. Acad. Ind. Res. 2014, 3, 156–163.
  102. Salehi, A.; Najafi Kani, E. Green cylindrical mesoporous adsorbent based on alkal-activated phosphorous slag: Synthesis, dye removal, and RSM modeling. Adsorption 2018, 24, 647–666.
  103. Van Den Berg, H.H.J.L.; Friederichs, L.; Versteegh, J.F.M.; Smeets, P.W.M.H.; Husman, A.M.D.R. How current risk assessment and risk management methods for drinking water in the Netherlands cover the WHO water safety plan approach. Int. J. Hyg. Environ. Health 2019, 222, 1030–1037.
  104. Rossatto, D.L.; Netto, M.S.; Jahn, S.L.; Mallmann, E.S.; Dotto, G.L.; Foletto, E.L. Highly efficient adsorption performance of a novel magnetic geopolymer/Fe3O4 composite towards removal of aqueous acid green 16 dye. J. Environ. Chem. Eng. 2020, 8, 103804.
  105. Zhang, Y.J.; Yang, M.Y.; Zhang, L.; Zhang, K.; Kang, L. A new graphene/geopolymer nanocomposite for degradation of dye wastewater. Integr. Ferroelectr. Int. J. 2016, 171, 38–45.
Contributor MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to :
View Times: 886
Revisions: 4 times (View History)
Update Date: 30 Dec 2021
Video Production Service