Circulating Tumour Cells: History
Please note this is an old version of this entry, which may differ significantly from the current revision.
Subjects: Biophysics
Contributor: , , , , , , , ,

Cancer is one of the dreaded diseases to which a sizeable proportion of the population succumbs every year. Circulating tumour cells (CTCs) have grabbed the attention of researchers in the detection of metastasis and there has been a huge surge in the surrounding research activities. Acting as a biomarker, CTCs prove beneficial in a variety of aspects. Nanomaterial-based strategies have been devised to have a tremendous impact on the early and rapid examination of tumor cells.

  • circulating tumour cells
  • metastasis
  • nanotechnology
  • nanomaterials

1. Introduction

Cancer is a broad term that often refers to a set of diseases characterized by uncontrolled cell growth with the ability to spread throughout the animal body [1]. It is one of the major causes of mortality globally, affecting patients from all socioeconomic backgrounds and their families. According to World Health Organization (WHO) statistics, 18.1 million new cases and 9.6 million deaths occurred in 2018 due to cancer, with secondary cancer or metastasis accounting for more than 90% of them [2,3]. The growing prevalence of cancer has encouraged the development of rapid and sensitive techniques for early detection. Currently, several methods, such as detecting the levels of metabolites or tumour markers in the blood, biopsy followed by histological evaluation, ultrasonography, magnetic resonance imaging, computerised tomography, positron emission tomography, and endoscopic-based examination are available [4]. The majority of the techniques are routinely used for cancer diagnosis and disease monitoring at a later stage only after the appearance of initial symptoms. As cellular and molecular sciences advance, various indicators and markers for early cancer detection are being investigated. Biomarkers based on gene and RNA expression are regularly used for the expeditious evaluation of cancers [5,6,7]. However, the requirements of extensive facilities and expensive instruments have limited its diagnostic application. On the other hand, dissemination of circulating tumour cells (CTCs) from primary tumours due to metastasis—which then spreads into the lymphatic nodes and blood, has been seen as an important marker for early diagnosis of cancer [8]. They stay either as a single cell or in a group, which can move from one site to another causing tumour [9] The early invasion of CTCs along with fast progression is vital for accurate monitoring, and detection of the tumour cells and an important part of liquid biopsy [10,11]. Detection and genomic characterization of CTCs can also help to investigate the mechanism of metastasis [12,13]. Liquid biopsy, often referred to as fluid biopsy or liquid phase biopsy, is a non-invasive diagnostic method for the analysis of non-solid biological samples such as blood. It overcomes the limitation of the inability to obtain heterogeneous information with traditional methods and helps in the identification of both genetic and epigenetic causes related to any diseases [14]. Liquid biopsy is not a routine test in clinical practice; however, over the past few years, it has evolved as a promising tool for the effective and early detection, monitoring of recurrence and evaluation treatment efficacy of cancer. The early description of circulating free DNA (cf DNA) and RNA in 1948, without knowing in detail about it, is said to be the first step towards the biopsy [15]. Ever since, various other biomarkers have also been looked into, for effective disease management (Figure 1). Micro-RNA, cf DNA, circulating tumour DNA, metabolites, CTCs, exosomes and other extracellular vesicles are some of the markers which have been significantly worked upon. Researches isolate these markers from blood and analyze them by different biochemical and analytical methods such as next-generation sequencing, polymerase chain reactions and mass spectrometry-based genotyping assay [7,16]. With the advancement of cancer treatment towards a shift to personalized medicine, this developing technology has the potential to change and/or complement functional cancer care. The advancement of liquid biopsy procedures has resulted in the incorporation of extremely effective approaches for the rapid detection and separation of CTCs [17], with nanotechnology at the forefront. Due to the unique physicochemical properties of nanomaterials emerging from their high surface area, shape, size, and optical nature, nanotechnology has proven to be the most reliable strategy in cancer diagnosis [18]. Higher surface-to-volume ratio property allows strong binding of the ligands which helps in recognizing critical biomarker molecules. As such, with the advent of this strategy, CTCs isolation and detection with higher efficiency and specificity, even at extremely low numbers in the circulatory system, has recently been achievable, allowing for early cancer diagnosis [19].
Figure 1. Applications of liquid biopsy in cancer diagnosis along with the different biomarkers commonly targeted using the technique.

2. Biogenesis of CTCs

CTCs are a rare subset of cells that are released from primary tumours and act as the precursor for the growth of additional cancerous tissue in a different location in the body [20]. The hallmarks of cancer such as invasiveness and motility give rise to the ability of malignant tumours to be metastatic. This is devised to be the main factor for the formation and release of CTCs in the circulatory system [21]. Though the formation and progression of cancer is a complex and little understood process, with the development of modern tools, this can be explored. The metastasis and carcinogenesis of tumour cells are commonly described to be a multi-step process, as shown in Figure 2 [22]. Initially, the cell loses its normal cell cycle ability, whether being triggered by internal factors or due to extremal stimulus. This causes the tumour cells to accumulate numerous mutations, prompting them to become malignant [23]. In most cases, it is not the original tumour that causes fatalities, but the spread of malignant cells to other organs. Once the primary tumour grows to a certain size, the available nutrients and oxygen become limited for the continuously dividing cells. This triggers the formation of hypoxia-inducing factors (HIFs). HIFs, with other pathways in the tumours microenvironment, trigger the expression of angiogenesis-promoting factors such as VEGF and angiopoietin-1 and 2, promoting neovascularization around the tumour [24,25]. Further, the expression of HIFs, angiogenesis, and other factors such as laminin have been shown to reduce the expression of E-cadherin through the pleiotropic effect [26]. The suppressed expression of E-cadherin in the tumour microenvironment reduces cell-to-cell adhesion and increases the mobility of the tumor cells. This begins the process of epithelial-to-mesenchymal transition (EMT). It is observed that changes in the expression of makers and molecules on its surface, such as altered expression of extracellular matrix (ECM)-cell adhesion molecules, suppress expression of epithelial markers, and increase expression of mesenchymal markers [27,28]. EMT is often considered to be the most accepted hypothesis regulating the formation of CTCs. However, this process is highly complex and still unknown. After the EMT process, the tumour cells adopt a motile, invasive phenotype leading to their detachment from the primary tumour and migration into the neighboring tissue, also known as local invasion. The process is regulated by complex mechanistic changes in cytoskeleton structure, proteolysis of surrounding tissue and alteration in cell–ECM dynamics [29]. Thereafter, some of the cancer cells evade into the network of blood vessels formed around the primary tumor body by intravasation. This process allows cancer cells to initiate metastases at a distant, different locations within the animal body. The cancer cells in the circulation (CTCs) have the ability to evade anoikis due to their mesenchymal properties and also due to the expression of anoikis inhibitors (such as XIAP) in the sub-populations of the cells, thereby resulting in the cells being resistant to apoptosis [30]. The CTCs in circulation are believed to be non-proliferative in nature and travel around the body until they adhere to the capillary bed of a different organ due to their molecular properties or size. Therefore, it is observed that secondary tumours can be formed at distant organs from the original site of the primary neoplasm causing the most fatal malignancies [31]. In addition, it is worth mentioning that these cancer cells also take part in local metastasis, thereby often reaching the lymph nodes that make the disease more severe. Once the cancer cells are attached to the capillary surface, they penetrate the endothelial layer of the blood vessel, thereby moving into the host organ. Then the cells undergo another round of phenotypic alteration almost similar to EMT which is known as mesenchymal to epithelial transition [32,33]. Though this process is less understood and is still being studied, it is observed that the cancer cells regain their epithelial characteristics, which helps them to acclimatize to new surroundings. Apart from the EMT-mediated motility of cancer cells in the circulation, the non-EMT-associated scenarios have also been known to give rise to CTCs. Centrosome amplification is one of them, in which the E-cadherin expression is maintained throughout the process of CTC formation. The centrosome is sought to play the role of organizing flagella and cilla, apart from also facilitating the separation of chromosomes. Thus, the centrosome has been shown to induce the propagation and motility of cancer cells [34]. Another method is by the non-EMT-mediated dissemination to form CTCs clusters, in which 2–50 cells are clustered together by intracellular adhesion as they move across the vessels. These cells have a higher probability of surviving anoikis than individual circulating cancer cells [35]. This contributes to a better sustainable metastasis and increases the likelihood of extravasation in secondary sites. As not all CTCs lose their epithelial properties, it is also necessary to consider these properties for the effective detection of cells in the blood. It should also be noted that cancer cells might enter the blood following the surgical or microscopic procedures to remove the tumour (such as in case of minimum residual disease) in addition to the naturally occurring CTCs from primary or secondary neoplasms [36,37].
Figure 2. Schematic representation of potential biogenesis and the transport mechanism of circulating tumor cells. Reproduced from [38].
The physical and biological characteristics of the CTCs play an important role in the development of strategies for isolation and detection. CTCs are traditionally very rare cells, and their count has been devised as the marker for the potential prognosis of cancer. Many studies have shown the presence of ≥ 5 CTCs per 7.5 mL of blood as the indication of metastatic cancer whereas one cell is considered to be the threshold for non-metastatic tumor [39,40]. However, such low cut-offs for prognosis require extremely sensitive and efficient detection methods [41]. As CTCs move around in the circulating system without any supporting tissue, these cells are found to be very fragile and harsh conditions have been shown to initiate the apoptotic cascade in them [42]. Therefore, gentle isolation methods should be followed to preserve the integrity of cells. CTCs are usually 10–20 μm, which is usually larger than the other cells in the blood. This feature is used in size-selective methods for the easy isolation of CTCs [43]. Further, the less deformability of cancer cells compared to erythrocytes and lymphocytes can be used to discriminate between malignant and non-malignant cells [44]. CTCs also contain certain biological features such as cell surface markers similar to their cells of origin. Epithelial cell adhesion molecule (EpCAM) is a transmembrane glycoprotein commonly expressed by the CTCs originating from epithelial cells [45]. The other blood cells lack this marker, thus antibodies against the molecule can be used to effectively segregate the cancer cells from the rest. However, as CTCs also undergo EMT, therefore mesenchymal markers can also be present in cells among the CTCs population. Another sub-group of CTCs is also known to show stem-cell-like features (cancer stem cells). Thus, they show stemness markers and can be used to study important aspects of cancer therapy such as recurrence and treatment resistance [46]. In addition to the common markers, cancer-specific markers are also present in CTCs. The HER2 marker has been effectively used to establish the prognosis of breast cancer CTCs [47]. In another study, androgen receptor markers have been used for the detection of hormonally responsive prostate cancer [48]. Likewise, specific markers of lung, gastric and pancreatic cancer are also used for the observation of specific CTCs.
Irrespective of the type of CTCs and how they enter the circulatory system, they undergo one the following fates: including anoikis or cell death, transition to a dormant state and remain in circulation, develop micrometastases and remain dormant for a long time without developing an aggressive tumor, or develop a malignant tumor at a secondary site [49,50]. It is believed that primary tumors can emit ~1 × 106 cells/g of tumor into the circulation in a day and the majority of it (~85%) undergoes anoikis and gets destroyed within a few hours [51,52]. It is less than 0.01% of remaining cells in the circulation that act to develop metastatic tumors [36]. The rarity of the CTCs and the non-reliability of one marker to effectively distinguish them from other blood cells makes the detection and isolation of cancer cells extremely challenging. In this aspect, different markers involving liquid biopsy have been demonstrated to have significant advantages towards effective cancer monitoring (see Figure 1). The detection could involve direct or indirect methods for the identification of markers whereas isolation indicates the efficient separation of them. As CTCs are usually present in very small numbers in blood, it is necessary to develop techniques which are highly efficient, and effective as well as detectable in a small quantity of sample. After isolation, throughput methods are obligatory for the proper characterization of the isolated CTCs.

3. Nanotechnology

Nanotechnology has been utilized in various biological research to carry out with high-throughput, sensitivity, selectivity, and specificity and it possesses a high capacity to measure multiplexed systems. Due to their smaller size, they possess a high surface-to-volume ratio, which increases their efficiency towards cellular binding capacity; they are utilized in cancer research which has led to the advancement in significant detection, isolation and enrichment of CTCs from the blood sample. The nanoparticles that are implemented in the analysis of CTCs are classified into various types depending upon their type, shape, and structure. Some of them include quantum dots/fluorescent nanoparticles, surface-enhanced Raman scattering nanoparticles and many more. Each of them has its unique advantages and disadvantages, as discussed in Table 1, which make them suitable for cancer research.
Table 1. Different types of nanomaterials used for the detection of CTCs.

3.1. Quantum Dots (QDs)/Fluorescent Nanoparticles

QDs are zero-dimensional fluorescent nanoparticles, where all the dimensions of the particles are less than 100 nm. They possess a semiconductor core covered by a shell as shown in Figure 3a. They are generally made up of elements from groups II to VI or III to V of the periodic table. They pose discrete energy levels with varying bandgap depending upon their size, which ranges between 2–10 nm, which is less than the size of the exciton Bohr radius. They display unique electronic and optical properties such as higher quantum yield, longer fluorescence lifetime, large absorption coefficient, high-quality brightness, excellent photostability, and narrow and tunable fluorescence emission which lies between visible to infrared wavelengths. Due to these properties, QDs have led to the development of modern-day probes which have high specificity and sensitivity [53,54,55,56,71].
Figure 3. Schematic representation of (a) Quantum dot labelled with antibodies (Redrawn after [72]). (b) SERS nanoparticles (Redrawn after [73]). (c) Magnetic Nanoparticles labelled with antibodies (Redrawn after [62]). (d) Conductive nanoparticles. (e) Upconversion nanoparticles (Redrawn after [74]). (f) Nanoparticles of various morphologies used to detect CTCs. (g) Metallic nanoparticle displaying surface plasmon resonance (Redrawn after [75]).
QDs attached to antibodies, are used in the detection of CTCs with very high metastatic potential as they display unique fluorescence signals at different wavelengths and thus, can also determine the stage of tumor by determining the number of CTCs in the blood vessel [53,54,55,56,71,76,77,78,79,80,81,82,83,84].

3.2. Surface-Enhanced Raman Scattering Nanoparticles (SERS NPs)

SERS nanoparticles are formed as a result of absorbance of the analyte, e.g., organic dyes on the surface of plasmonic metal nanoparticles which results in significant enhancement of their Raman signals due to the amplification of electromagnetic field upon excitation by an external light source, which helps in detection of even single molecule (Figure 3b). Its development has led to the foundation of new-generation ultrasensitive probes with high specificity and minimized photobleaching. Probes fabricated by these NPs can be used in biomedical imaging, disease detection and diagnosis [55,85].
By conjugating it with antibodies, it can be used in enrichment, multicolour imaging and enumeration of even a single cell of CTCs [57,58,59,85,86].

3.3. Magnetic Nanoparticles (MNPs)

Magnetic nanoparticles (MNPs) are shown in Figure 3c. They commonly pose a core–shell structure with a magnetic core that is covered by a magnetically disordered shell. They are generally made up of elements such as cobalt (Co), iron (Fe), nickel (Ni) and ferrite oxide (Fe3O4) possessing magnetic properties. When the external magnetic field is passed through them, under saturation conditions, all the magnetic moments of the particles align along the direction of the applied field. MNPs can display ferromagnetic or superparamagnetic behavior which can be changed by altering their morphology, structure and composition, which helps in their separation. If the size of the NPs is less than 20 nm, then after removal of the external field, due to strong thermal fluctuations magnetic nanoparticles display superparamagnetic behaviour, which possesses no residual magnetization in absence of a magnetic field. Whereas, if the size of the NPs is higher than this limit then some amount of residual magnetization is present in them and they are classified as ferromagnetic NPs [55,61,62].
Their unique properties such as high cellular binding capability, outstanding stability in blood and their capacity to attach a large number of MNPs to a single cell without any aggregation make them very useful for immunomagnetic separation, enrichment and detection of CTCs from blood. These NPs bind easily to the cells and, hence, can be used for in vitro separation under the presence of an externally applied magnetic field [53,60,61,62,87,88].

3.4. Conductive Nanoparticles/Carbon Nanotubes (CNTs)

Carbon nanotubes (CNTs) are one-dimensional nanostructures, due to the propagation of electrons only along the axis of the nanotube. They possess a hollow cylindrical core composed of single or multiple sheets of graphite (Figure 3d). Due to the strong carbon bonds in them and their cylindrical symmetry, they possess extraordinary mechanical, unique structural, and outstanding electrical properties. Their conductivity can be varied with a change in chemical binding and structure which makes them an excellent choice for the fabrication of biological sensors. If the CNTs are made up of multi-walled graphite, their surface area and electrical conductivity increased and, thus, can be utilized in the electronic detection of CTCs by the method of real-time electrical impedance sensing. When the CNTs bind with CTCs their conductivities are decreased by around 60%. They are mainly utilized to detect CTCs which have low protein expression without going through any enrichment process [54,55,63,64,89].

3.5. Up Conversion Nanoparticles (UCNPs)

UCNPs made up of lanthanide ions resulted in the breakthrough discovery of next-generation fluorophores, bearing the capability to convert two or more low-energy incident photons in the near-infrared region to a single photon emission with relatively higher energy in the visible region resulting in fluorescence emission. This conversion of energy occurs via a nonlinear optical process as shown in Figure 3e. The extraordinary properties displayed by them such as strong and sharp emission spectra not only prevent damage the normal tissues but also facilitate deep penetration [55,66]. Their unique luminescent properties, large Stokes shifts, low background signals, and less photobleaching, are used for high-sensitivity detection and imaging of CTCs [54,55,65,66,67].

3.6. Nanostructures of Various Shapes

The shape and size of the nanostructural probes greatly influence their properties and thus, their sensitivity. The most popularly utilised shapes of the nanostructure substrates are nanosphere, nanorod, nanosheet, nanoprism and nanostars (Figure 3f) [54,67,90]. Some properties associated with these nanostructures are enhanced cell capture and binding affinity which enables them to functionalise targeting ligands to be utilised for capturing and enrichment of CTCs by ligand–antigen binding. The shape and size of the NPs also affect the enhanced permeability and retention effect (EPR) [54,67,90,91,92,93,94,95].

3.7. Metallic Nanoparticles/Surface Plasmonic Nanoparticles

Metallic NPs display unique optical properties, due to the presence of free conduction band electrons which oscillate collectively when the frequency of the external electromagnetic radiation matches the frequency of oscillation of the conduction band electrons. Under this condition, localized surface plasmon resonance (LSPR) occurs, which results in significant enhancement of absorbance in smaller-sized metallic nanoparticles. (Figure 3g). The resonance condition in each metallic nanoparticle is dependent on its size, morphology, composition, and geometry. Plasmonic NPs such as gold and silver display biocompatibility and high chemical stability with minimum toxicity and hence, can be used for biological purposes [54,70,96].
Colorimetric assays are based on the use of metallic nanoparticles can quantifiably detect the presence of CTCs in blood. The sensitivity of functionalized metallic nanoparticles in the detection of CTCs extends up to several CTCs per mL of blood [54,68,69,97,98].

This entry is adapted from the peer-reviewed paper 10.3390/pharmaceutics15010280

This entry is offline, you can click here to edit this entry!
ScholarVision Creations