The rational design of methodological approaches in the quest forsatisfactory explanations of conceptual and empirical phenomena is the essence of holism [41,42]. In this context, it is highly relevant to understand the close relationship that exists in each of the parts that make up a given system and their interaction to form a whole [43]. Undoubtedly, this means that a whole is made up of parts, but the action that it exercises or performs cannot be unequivocally determined as the sum of its parts. This concept leads to thinking that the relationships and interactions between the parts contribute strongly to determining the qualities and attributes of the whole as a unit (i.e., the components are not independent of each other). In the historical context, the concept of holism in science was introduced in the second half of the 1920s, explaining the behavior of complex biological systems [44]. Considering this, in nature, it has been observed that the interaction among the component parts of a living organism (e.g., cells) acting as a whole allows for the preservation of their existence (Figure 1) [45,46,47].

Therefore, the hierarchical interactions present in biological systems allow them to act as a whole, being more than the simple sum of their parts (i.e., hierarchical holism) [48,49]. Illustratively, inside the cell membrane, this behavior can also be observed because the coordinated interaction of their organelles (e.g., ribosomes, nucleus, mitochondrial) is fundamental for satisfying all needed biological functions (Figure 2) [50].

A contrasting example is found in physics. The so-called entangled states belonging to quantum theory are often considered as an exception to the holistic principle. In this case, it is established that every system or physical entity can be described from its kinematic properties (e.g., velocity, position coordinates) in aform independent of other systems, i.e., a reductionist perspective. However, it is known that these properties can become dynamic (acting as more complex systems) when the influence of interactions with other systems is taken into account (Figure 3) [51]. Consequently, in the case of composting systems, the study of the state of an aggregate system is approached from the analysis of the states of the subsystems and their interactions.

On the other hand, the importance of integrated systems is closely related to the rapidly emerging field of nanoscience and nanotechnology [52,53]. Nanotechnology addresses the rational design and potential technological applications of functional structures that generally exhibit a high degree of organization at the molecular and supramolecular scale [54,55]. Importantly, an integrated molecular system can be considered as hierarchical assembled molecules or macromolecules arranged to carry out specific processes [56,57]. This is the case already described for biological systems (e.g., mitochondria, the photosynthetic system). Other comparatively less structurally complex but sophisticated artificial systems are abundantly reported in the literature, such as photoelectrochemical systems [58], sensors [59], semiconductors [60], and devices for solar cells [61], among others (Figure 4).

These are all representative examples of integrated molecular systems that constitute a considerable amount of knowledge and experience accumulated over several years towards the development of nanotechnology. For example, many efforts have been devoted to designing more thermodynamically efficient integrated photochemical systems, allowing the conversion of light energy into clean, abundant, and highly usable energy for technological purposes [62,63]. As mentioned above, this approach is based on mimicking, to some extent, the function and organization of biological systems on a scale of similar dimensions (e.g., micro, nanoscale). In general, these types of artificial systems have sophisticated structures and architectures, with a high degree of organization (i.e., assembled materials) [64]. From the perspective of technological advances, the fabrication of self-assembled structures (through intermolecular interactions) is an important drive towards designing photoresponsive systems [65]. This is a relevant point, since the challenge of mimicking more complex processes or structures that turn out to be more efficient is an interdisciplinary challenge fully in force to date [66,67]. Therefore, the scientific and technological endeavors should feel strongly encouraged to continue providing valuable efforts to better understand the role of functional holistic-integrated molecular systems [68,69].

Photo-induced energy transfer (PhET) involves light-induced processes present in molecular systems that contain photoactive chemical entities (e.g., chromophore groups) [70]. Globally, this type of process requires the study and an adequate understanding of the behavior of the excited states of organic molecules. Importantly, the thorough analysis of these processes can evidence valuable information on the light-induced energy-transfer mechanisms [71].

PhET processes are a highly relevant phenomenon both in nature and in artificial systems. A representative case is photosynthesis, wherein numerous energy transfer phenomena occur in the reaction center [72,73]. This triggers different mechanisms of ion separation and charges transport for the effective synthesis of energetic molecules. Thereby, photosynthesis can be visualized as large and complex machinery for converting light radiation into chemical energy [74]. In the case of artificial systems, photofunctional materials should exhibit attributes to harvest and convert solar energy into usable energy. Considering this, several examples can be cited as suitable molecular systems to favor photon-induced energy transfer, such as micelles [75], vesicles [76], colloids [77], monolayers [78], and dendrimers [79].

The above-mentioned systems require incorporating photoexcitable molecules or entities by hosting into their nanoreservoirs, intermolecular interactions, or forming covalent bonds. Ideally, photoexcitable molecules must contain active energy sites, donors, and acceptors. Additionally, the chemical environment would favor and stabilize the photoexcited species involved in the energy transfer process. Note that these phenomena occur at nanoscale dimensions; hence, the dimensions of the inner reservoirs of the host systems should be on that magnitude [80,81]. Considering these aspects, dendrimer-based systems can be conceived as a proper medium to ensure that the non-radiative process is raised for the lifetime of a fluorophore [82]. It is important to mention that the light-harvesting process performed by photoactive systems bearing electron-donor active sites involves the unidirectional transfer of the absorbed radiation energy [83]. This is an essential condition observed in nature, where photoactive centers composed of numerous chromophores exhibit a specific position or determine the spatial orientation for each other [84]. Therefore, artificial chemical systems would contain several symmetrically distributed light-harvesting donor–acceptor sites (into micellar, vesicular, or dendrimer structures) to appease a directional energy transfer over nanoscale dimensions. In recent years, the fluorescence (or Förster) resonance energy-transfer (FRET) mechanism has been studied in-depth to concentrate absorbed energy at a spatially confined site in nanometric regions [85,86,87]. FRET systems involve the presence of a significant amount of chromophores able to mainly absorb light radiation, e.g., in the visible region of the spectrum (this is addressed in more detail below). Importantly, these artificial systems would be suitable for generating multi-step mechanism directional energy transfer of the absorbed radiation energy [88]. These chemical environment conditions would allow for reaching photoactive centers separated by distances in the order of nanometers. Additionally, it is expected that the energy of photoexcitation of the chromophore centers corresponds typically to S₀→S₁ transitions (i.e., from HOMO to LUMO) [89,90].