MNs are able to encapsulate proteins with high efficiency and store them in a bioactive state without requesting further expedients (cold-chain), hence minimizing the cost of transportation. Moreover, the addition of excipients, such as ethylene-diaminetetraacetic acid trehalose or mannitol, into their formulation can also stabilize the activity of the drugs over several days. Unfortunately, the current MN preparations still show some limitations. For example, solid MNs have expensive fabrication costs and their difficult application processes are troublesome for patients. Coated MNs are able to load only a small amount of drugs since they can only be applied on the surface of the MNs, while hollow MNs are characterized by a potential toxic effect
because of the uncontrolled drug dose release that occurs, and they require specialized personnel and a complex set up for the injection. In addition, there are dissolving MNs, which are not able to provide prolonged release, and most of the methods are not suitable for protein stability. Despite these restrictions, the progress in MN fabrication and protein encapsulation make microneedles a promising platform for the dermal delivery of drugs.

Type of MNs Based on Their Structure and Release Profile

Hollow MNs

Hollow MNs emerged to inject liquids and suspensions for drug infusion into the body through the needle bore . Silicon, metal, or glass can be employed for the preparation of hollow MNs with an adjustable bore diameter. A study using ovalbumin (OVA)-loaded PLGA nanoparticles (NPs) delivered by hollow MNs showed a higher antibody response and a higher amount of interferon-γ as compared to intramascular NP injection and soluble antigen delivered by hollow MNs.

Coated MNs

In this kind of patch, drugs are adhered directly onto the surface of solid or polymeric MNs. Since the coating layer reduces the mechanical strength and sharpness of the needles, the drug loading on the needle surface is limited to a low amount. As a consequence, coated MNs are only usable for some specific applications in which a low dose is needed.

Dissolvable Matrix MNs

Dissolving MNs were created to encapsulate drugs within a water-soluble polymer matrix, and they become completely dissolved once the MNs are inserted into the skin, with a dissolving time from minutes to hours.

Degradable Particle Embedded-MNs

In order to achieve sustained drug release, MNs with biodegradable polymer particles were designed. The drug payload is gradually released by simple diffusion and hydrolysis of the polymer.

Swellable MNs

Swellable MNs, also known as cross-linked hydrogels, are solid systems that swell after the uptake of interstitial fluid (IF), after which they deliver the payload, and are removed intact from the
skin.

Bio-responsive MNs 

Bio-responsive materials have the outstanding characteristic of sensing physiological or pathological signals and regulating on-demand release based on the presence and intensity of a specific stimulus.

Conclusion

The clinical development of proteins is faster than that of small-molecules or peptides, although their chemical-physical properties put wide restrictions on transdermal delivery. Particularly, proteins are subject to degradation in aqueous environments, undergoing aggregation, denaturation, or precipitation mechanisms. Microneedles possess many advantages to avoid protein denaturation and aggregation (e.g., rapid delivery) as compared with other systemic administrations, and for this reason, they could significantly revolutionize the field of drug delivery.