Alluvial Gold Mining Technologies: History
View Latest Version
Please note this is an old version of this entry, which may differ significantly from the current revision.
Contributor:
Spyridon Mathioudakis
,
George Xiroudakis
,
Evangelos Petrakis
,
Emmanouil Manoutsoglou

Gold has been a highly prized commodity throughout history and has played a significant role in humanity’s economic and cultural progress.

  • alluvial gold
  • “Golden Fleece”
  • gold mining

1. Introduction

Gold is a metal whose value has been recognized by all cultures over the centuries for different reasons and was originally extracted from alluvial deposits. Some scientists believe that the exploitation began in the early Iron Age, others in the second half of the 8th century BC, or even in the 7th century BC. More recently, scientists argued that the Pactolus gold was already mined in the third millennium BC. The Egyptians recovered gold on the coasts of the Nile and Sudan (Nubia) approximately in the 5th millennium BC [1]. Analyzing samples with a higher degree of fineness than naturally occurring gold can suggest the use of refining techniques, and the presence of unusual alloys may indicate evidence of such practices in Ancient Egypt. Unfortunately, this method is open to certain difficulties. Ancient Egyptian gold articles are not as common as might be generally expected and are often not available for analysis from crucial time periods. These factors present obstacles to fully comprehending the refining techniques and alloys employed by ancient civilizations such as the Egyptians [2].
According to Greek mythology and historical sources, the ancient Georgian Kingdom of Colchis was renowned for its wealth in “gold sands,” and the indigenous people mined this precious metal from the rivers. They employed special wooden vessels and sheepskins for the extraction process. Apart from the references to the Argonautic expedition by Strabo (book-XII; Pliny the Elder I), the perspective of the Roman historian Apianos Alexandrinos (90–170 AD), who accepted the Argonauts’ trip to the Colchis kingdom in quest of the “Golden Fleece” as a true occurrence, is adopted by analyzing geological information, artifacts, myths, and historical sources [3]. Next, the processes were developed significantly with the introduction of Emperor Augustus’ new mining techniques during the Roman Empire period, such as hydraulic mining (hushing) and ground sluicing methods [4].
The Renaissance period was accompanied by Georgius Agricola’s book “De Re Metallica”, an innovative manual of mining techniques still used in today’s industrially advance era. In particular, Agricola highlights a groundbreaking technical advancement in his writings, describing a new type of pump that brought about a revolution in mining techniques. He applies his rigorous taxonomical approach to detail various types of pumping systems, including both discontinuous methods involving buckets, goatskins, or tubs assisted by ordinary hoists, and continuous methods utilizing a chain of buckets, reciprocating piston pumps, or pater noster pumps. His great work, De Re Metallica, carefully depicted and described all facets of mining from ores to mining machinery. Until that time, Pliny the Elder’s work Historia Naturalis was the main source of information on metals and mining techniques. Agricola acknowledged his debt to ancient authors, such as Pliny and Theophrastus, and made numerous references to Roman works. In geology, Agricola described and illustrated how ore veins occur in and on the ground. He described prospecting for ore veins and surveying in detail, as well as washing the ores to collect the heavier valuable minerals, such as gold and tin. Agricola’s work offers insights into the utilization of water mills in mining operations, including a device designed to raise personnel and materials in and out of mine shafts. Water mills played a significant role in processes like crushing ores to liberate fine particles of gold and other dense minerals. Furthermore, Agricola described their application in operating large bellows to forcefully introduce air into the confined spaces of underground mines [5][6].
Gold was primarily collected from alluvial deposits in the ancient world using gravity techniques and mercury (amalgams) [7], which are still employed today in small-scale alluvial gold resources. Large-scale hard rock mining first employed cyanide in the 1880s to extract commodities, including gold, silver, copper, and other precious metals [7]. New techniques were utilized during the colonization of the Americas by the Spanish, who took advantage of the highly effective procedures of the natives. Refining by amalgamation consisted essentially of grinding the ore to coarse dust and sprinkling a small amount of mercury over it. From this, pure gold could be obtained by applying enough heat to volatilize the mercury. Other ingredients were added to increase the speed and effectiveness of the process: water, to bind the dust into a loose mud; common salt; iron filings; and copper sulphate.
It is acknowledged that the mercury method poses a severe threat to the environment and the miners’ health. Small-scale mining produces the highest mercury emissions (the mercury cycle presented with black arrows in Figure 1), with South America producing 340 tonnes annually [8][9]. Modern industrial and artisanal gold extraction is subject to significantly less stringent enforcement standards than is necessary for industrial mining, particularly in the Amazon Basin region, as demonstrated in the work of Costa and Rios [10]. The effects are also amplified by the widespread use of amalgamating gold with mercury and the localized use of cyanide leaching. Mercury is routinely released into the environment through the latter approach, contaminating waterways and harming all connected ecosystems, including human settlements and the food supply chain [10].
Some of the environmental impacts associated with small-scale gold mining are as follows [11]:
  • Mercury pollution;
  • Disposal of tailings and effluents into rivers;
  • River damage in alluvial areas;
  • Erosion damage and deforestation;
  • Landscape destruction;
  • Socio-economic consequences.
Small-scale alluvial gold miners in Tadó, Dept, Chocó, generate “green gold” using readily available plant extracts as part of a unique method employed in Colombia to substitute mercury. Instead of using mercury, a frothy liquid made from the crushed leaves of Balso (Ochroma pyramidale) and Malva (Hibiscus furcellatus) is poured into the gold pan (type batea) [12].
Figure 1. Gold extracting in small-scale placer involving the stages (presented with blue arrows): (1) excavation, (2) grinding and sifting, (3) washing, (4) panning, and (5) gold–Hg-amalgam burning.
Apart from analyzing the abovementioned critical historical periods and the conditions that led to the foundation of the alluvial gold mining and processing methods, the technical characteristics and operating principles of the devices applied from 4000 BC to the present day will be described in detail. Over the years, there have been rapid advancements in gold mining and extraction methods. New machines and methods [13][14][15][16] have been developed in our modern society to enable more precise excavation while minimizing environmental impact.

2. The Historical Progression of Alluvial Gold Mining and Processing Technologies

2.1. Early Finds of Gold in Greece, Egypt, and Asia Minor (5000–1000 BC)

Gold was first found at the surface level near rivers in Asia Minor, such as the Pactolus in Lydia, and was also mined underground from 2000 BC by the Egyptians and later by the Romans in Africa, Portugal, and Spain. Electrum (a natural alloy of gold and silver) was used in jewellery by the Egyptians from 5000 BC. The Egyptians recovered gold along the Nile and Nubia (Sudan), specifically from the highlands east of the Nile in the Red Sea region. The oldest geological map discovered is the Turin Papyrus of the Wadi Hammamat gold mines and greywacke stone quarries used by ancient Egyptians [17]. The gold was initially derived from eroded surface material and then from underground shafts and tunnels in these deposits. Egypt served as the primary source of gold in the ancient Mediterranean world, holding this prominent position before the peak of Greece’s influence. Before 1500 BC, the Egyptians developed a method known as fire assaying to assess the purity of gold. Chemical analysis as researchers know it today has its roots in the assaying procedure used to handle precious metals, particularly gold [18].
The initial gold artefacts uncovered in Greece included a gold earring discovered in Dimini, a fortified settlement in Thessaly near Volos, dating back to the early fifth millennium BC. Shortly afterwards, a gold bead was discovered during the Final Neolithic period at the Sitagroi settlement in Drama, also located in Greece (4600–4200 BC). Archaeologists generally agree that the role of gold was associated with people of high social status and symbolized their power and authority. The motivation for producing a noble but impractical metal for the time indicates that its value was more closely linked to the social structure and hierarchy of cultures rather than the metallurgical expertise of the artisans involved [19]. Today, there is evidence that the initial gold production in Asia Minor dates between the Late Chalcolithic and Early Bronze Age. An early example of gold used in Asia Minor comes from the ancient city of Melid (or Arslantepe), where a gold disc was found around 3000 BC. The presence of this artefact, along with a spiral ring found in subsequent royal tombs, suggests the existence of a gold smelting industry that had likely already emerged and was operational inland. During the middle of the third millennium BC, there was considerable interest in the exploration of gold. Its production increased significantly with large quantities of artefacts being made from the second level of the “Troy” excavation, in the catacombs of Alaca Höyük and other sites in the Eastern Mediterranean, particularly in the royal tombs of the city of Ur (Mesopotamia). The enduring fascination with gold in Anatolia (Asia Minor in Greek) during this period could be attributed to the dynamic changes that occurred due to metallurgical operations: extensive exploitation of polymetallic ore deposits took place, the population increased, and a socially based demand for luxury goods developed in earnest [20].
The high demand for gold led to the depletion of primary sources. It is believed that at some point, alluvial and placer deposits could no longer provide the necessary quantities of gold. As a result, miners of the time moved to different sources. They quickly realized that the gold-bearing ores accumulating in the rivers came from an initially higher altitude, and it took them only a short time to detect their primary source. In this case, the gold was trapped in the host rock, commonly in amalgamated quartz at the highest point. Gold was initially subjected to a panning process. In order to achieve separation from the gangue minerals, the miners carried out the scrubbing process in which the gold-bearing quartz was washed by the action of water. Then, the pulp was poured onto a shaking table, with the heavier particles collected in its holes and pockets. The process mentioned above could be repeated as many times as possible to obtain the highest possible quantity of gold without the existence of gangue minerals [20]. Since the New Kingdom, gold has been recovered from quartz ores found in the weathered debris of the wadi beds, in addition to the mined gold quartz veins that are visible at the surface. So-called placers or nuggets had a minor significance in Egypt’s ancient gold mining history due to the arid environment. Such placers had, however, at the latest, been extracted since the Early Arab Period, typically in the form of extremely fine gold grains from alluvial sands in the wadi beds.

2.2. The Argonautic Expedition and the Retrieval of Gold from the Riverbeds of COLCHIS (1330 BC)

The mountains of the Caucasus have had a strong connection with gold for millennia. According to the legends told by Greek and Roman writers, Jason was sent on an impossible mission to find the Golden Fleece in Colchis (a part of today’s Georgia in Eastern Europe) [21], from which his usurper uncle and king of Iolkos, Pelias, assumed he would never return. The rivers flowing through Colchis, particularly in the Svaneti province, carried coarse sand and particles of gold. The local inhabitants employed special wooden sluice boxes designed to concentrate the sands, with the finer fractions being captured in the lower section of the device, lined with sheepskin. The remarkable and distinctive mechanism described above gave rise to the legend of the Golden Fleece, which originated in a country with abundant silver palaces and golden halls of ancient kings. Thus, the legend of the magnificent wealth of Colchis, like the rumours of the wealth of its rulers, is said to have excited the business avarice of the Argonauts [22].
Appian of Alexandria, a Greek-born Roman historian (90–170 BC), and other historians expressed that actual mining practices inspired the Golden Fleece. The description of the Golden Fleece alludes to the use of sheepskin to extract gold from riverbeds (Figure 2).
Figure 2. Representation of the use of the sluice-box. Its wooden base is covered by a fleece.
The Argonauts, on their return to Iolkos, avoided the Aegean and followed the sea routes of the central Mediterranean and the rivers of southern Europe. They passed through the great mining centers along the Danube, located mainly in the areas of Ai Bunar (Bulgaria) and Rudna Glava (Serbia), where copper was mined from the large deposits of gold in Transylvania, as well as in the southwestern part of Danube (Erzgebirge, Germany). From there, the Argo sailed via the Adriatic to the Rhone and the Eridanos (a river in Northern Europe mentioned in Greek mythology and historiography), the rivers south of the Alps, on whose banks were concentrated deposits of copper, iron, lead, and gold. The Argonauts reached Egypt and finally the Aegean, stopping in Crete and Thera, which was the intermediate station for imports from the Aegean to Crete (Figure 3) [23].
Figure 3. The path taken by the Argonauts and the regions containing the most significant deposits of the era.

2.3. The Revolutionary Techniques for Processing Alluvial Gold Deposits during the Roman Empire Era (27 BC–476 AD)

The growth of the Roman Empire demonstrated a significant need for metals, leading to the search for additional sources. Gold mining played a crucial role within the territories of the Roman Empire, including those conquered, primarily serving to support the military and its infrastructure. Over time, gold gained prominence and became a vital foundation of Roman society. It served not only as a currency during that era but also as an indicator of wealth and a catalyst for global trade. The Romans mined at least fourteen locations for gold, copper, and silver. In the Astur region, Aurifers were primarily found in Galicia and Lusitania, according to Rodrigues [24]. The Porto area in this final region had the most well-known mines [25]. The Ruina Montium method, the most impressive mining technique invented by Roman engineering and recorded by Pliny in his Natural History, was used in several mines [26]. The same concept was applied in Roman settlements on Portuguese territor. This method required moving an extensive amount of water to the area to be exploited and building channels (80 to 100 km) and reservoirs with a maximum capacity of 18,000 m3. The ruina montium was built using the methodical application of hydraulic force [27][28]. The flow of water (Figure 4a) through the excavation system leads to the erosion of the mountain. Such an excavation is marked with the red arrow in Figure 4b.
Figure 4. Ruina montium method to Las Médulas (a) water flow erosion; (b) remaining gallery from the operations.
For the most part, gold and other metals were mined by hand. However, a significant breakthrough came with the invention of hydraulic mining, a technique that greatly enhanced production levels. Hydraulic mining, also known as hushing, is an age-old mining technology that uses a powerful stream of water to remove impurities and uncover mineral veins. During the most profitable mining period, it is estimated that the Roman Empire produced up to 9 tonnes of gold per year. Considering today’s gold prices, this production level would generate over half a billion dollars in yearly gold revenue [29].
The Romans employed a range of techniques to extract metals from the overall composition of the ore. Specifically, gold underwent two primary refining processes. One approach involved heating the gold for an extended period alongside other substances, either metallic or non-metallic, using a process known as cementation or refining. Another method was the process of amalgamation with mercury, which is one of the earliest techniques for gold extraction. It involves the amalgamation of Au from Hg and then the distillation of Hg from the Au-Hg amalgam, producing spongy gold and mercury vapour [30].
The initial stages of exploiting alluvial gold involved leaching and crushing the gold-bearing rocks. These two operations could be conducted simultaneously and/or continuously depending on the mass to be extracted and the volume of water supplied. The open-pit mines provide ample evidence of the various leaching methods, such as selective operations in which convergent trenching (Las Cavenes) was applied when gold was located at higher altitudes (Figure 5). Gaius Plinius Secundus, a Roman author who lived from 23 to 79 AD, described the leaching of copper and subsequent evaporation of copper sulphate solutions [31], evident that the technique was used in Roman’s Empire era.
Figure 5. Exploiting alluvial gold deposits using hydraulic mining.
Figure 5 presents a detailed depiction of the secondary gold mining process using hydraulic power. The drawing depicts the water tank (from which water is supplied to the mining operation through a channel), the use of trenches to move the conglomerate materials to the lower section, the miners removing the larger boulders manually, and the sluice box devices used to wash the conglomerates and separate gold particles of different sizes. In general, this specific technique is known as “ground sluicing”, and it was particularly suited for mining deposits with a thickness ranging from 4 to 6 m. When dealing with dry soils, they would create 6 to 8 converging trenches, each inclined at a 5% angle relative to the horizontal plane. By utilizing the force of running water, the miners would push the alluvial deposits towards the trench walls, gradually driving them downwards along the slope. The pebbles were washed and removed from the trench while the flowing water carried the sand and clay towards the outlet. Consequently, the heavier fraction of the material settled at the bottom of the trenches, allowing for the recovery of gold grains via concentration pans (Figure 6) [32].
Figure 6. A different illustration of the exploitation of alluvial gold reserves using hydraulic power.

2.4. The Colonialism of the Americas and the Evolution of Indigenous Mining Techniques (1492–1511)

During the Spanish colonization of the Americas, mines such as the well-known Potosí silver mines of southern Bolivia and the cinnabar mines of Huancavelica were significant operations controlled by the Spanish crown. Most evidence indicates that Inca mining was also quite extensive. They considered that gold symbolizes power and wealth and had been sent by the gods. As a result, gold played a significant role in Inca culture, both in religious rituals and in everyday life. According to historical sources, Incas had a complex system for mining, refining, and processing gold. The metal was mined from the Andes mountains and the Incas would extract it from the ore using the amalgamation process, which involved mixing ground gold ore with mercury. Then, the mercury–gold amalgam was burned in order to valorize the mercury and recover the gold [33]. The Incas had also developed efficient ways to control the production of wealth and systems of state control involving complex mining techniques that required central coordination of the workforce [34][35][36].
All European rulers coveted gold when Christopher Columbus (1451–1506) landed in the Americas in 1492. In 1494, the conquistadors made their first gold discovery on the island of Hispaniola (now the Dominican Republic/Haiti) [37]. The Spanish empire then reached Cuba, which at the time was the best gold source, Puerto Rico in 1508, Jamaica in 1509, and Puerto Rico again in 1511. Spain became the richest nation in the world due to the conquistadors’ incredible gold discoveries in the Americas. During the Spanish colonization of the American continent, miners began exploiting alluvial deposits as a starting point. The simplest method employed was the processing of conglomerates and sands located in rivers and lake bottoms using the gold concentration pans. At the same time, the use of sluice box devices was widespread in gold processing and was carried out in colonial New Granada. To implement this method, workers constructed a channel or dam beneath the surface containing mineral deposits or along slopes. By excavating the ground, they created a designated area for treatment. Subsequently, the soil from the site was carefully removed and fed into the sluice box device. In some cases, workers would direct the water flow towards the treatment surface, using its power to help excavate.
Within these open-pit mines, a network of bamboo pipes was constructed, serving as small aqueducts to transport water from higher locations to the treatment zones where sluice boxes were located. The water would flow through the sluice boxes, causing the settlement of the larger minerals in the lower section of the device. Then, the workers would hand-sort the gold particles and remove the residue from the apparatus, which could be processed using gold concentration pans. By adding water to the mixture in the pan and shaking it vigorously, they could separate the lighter material from the top of the device. Consequently, the heavier material, including the concentrated gold, would settle at the bottom of the pan. Miners used many different techniques to separate metals from the bulk of the ore. When dealing with black sands containing gold flakes and iron oxides, miners adopted the approach of the natives. They would mix the concentrate with the sap derived from tropical plants, producing a foamy and sticky material that caused the “iron oxide flakes” to stick to its surface. As a result, pure gold would settle in the lower part of the ‘batea’s (open conical dish) gold concentration pan. In the 1880s, the technique of using magnets by Europeans could also help separate iron oxides from gold. In the Chocó region of northwestern Colombia, gold often appeared with platinum, and miners used mercury to separate the two metals at the time. However, until the mid-eighteenth century, platinum—Platino as it was called for its similarity to silver—was considered of little value [38].

2.5. The Pioneering Machine Designs by Georgius Bauer Agricola (1494–1556)

After the fall of the Roman Empire (476 AD), there was a notable shift in demand for minerals and metals from the Mediterranean region to the highly productive mines of central Europe. During the early Renaissance (15th century AD), mining and metallurgy developed significantly. During this period, metal production reached unprecedented levels, setting new records, and constantly evolving as innovative technologies were employed. The primary sources of information regarding metallurgy and mining during that period were Georgius Agricola and Vannoccio Biringuccio, who made substantial contributions. Their main works, Pirotechnia (1540) and De Re Metallica (1556), covered most of the topics related to mining and metallurgy and became standard textbooks for the next two centuries.
In 1556, almost a year after the death of its author, De Re Metallica was published in Basel. The publication of this book marked a crucial transition from the philosophical realm of metallurgy to a more empirical and scientifically grounded approach based on careful observation. Thus, De Re Metallica represents the first attempt to describe the nature, location, and means of obtaining and purifying metals from experience and experimentation. It is reflected in the ability to replicate the processes and experiments as they unfold and in the accuracy and detail with which they are described. Agricola’s De Re Metallica is considered one of the most famous engineering manuals of the 16th century. In his work, Agricola delves into the advanced machinery of the Erzgebirge (Germany) mines, mainly using pumps for water drainage and hoists for ore extraction. More specifically, readers can find thorough depictions of the various devices utilized for pumping water out of wells, as the excessive presence of water hinders mining activities. Unregulated water supply poses challenges to the efficient execution of underground mining operations. In cases where a proper drainage system is absent, it becomes crucial to excavate an appropriate well and construct a pump to control the water table [39].
The three innovative types of pumps that Agricola is presenting for the first time are the following:
  • Bucket-line pumps;
  • Pater noster pumps;
  • Piston pumps.
Agricola described and made detailed sketches of a series of water pumps that revolutionized the mining techniques. Agricola described in pictorial detail the methodologies and equipment used in Chapter VIII of the translated book De Re Metallica [40]. Agricola focused much of his attention on the procedures for washing and isolating metal from gangue. Forty-nine exquisite drawings depicting a variety of troughs, sluices, launders, weirs, and ditches for directing the ore and combining it with water to separate the fine grains from the lumps serve as illustrations of the equipment for washing ore. The heavier grains of metal that flowed down the troughs were caught and held by various mechanisms in these troughs and launders. Others featured cleats, rifles, skins, cloth, twigs, and sieves, whereas some were lined with boards. Also demonstrated was the art of whirling bowls with various capturing devices (Figure 7). The commonly used tools, including rakes, brooms, hoes, and trowels, were considered agitators.
Figure 7. (a) The Argonauts using the fleece’s skin to extract gold from the riverbeds of Colchis; (b) trough with wooden scrubber for washing the metalliferous ores; (c) Agricola’s millstone complex system for material’s further milling; (d) Bohemians baskets one of the first methods of gold panning; (e) one of the first sluice box systems; (f) bowls used as gold concentration pans.
The Colchians threw animal skins (B) into the springs’ pools (A), and when they were taken out, they were covered in gold particles. The “golden fleece” and the Argonauts’ expedition (C) were created by poets (Figure 7a).
Before developing the short strake and jigging sieve, metalliferous ores, mainly tin, were dried, crushed with stamps, and washed in a large trough (A) hollowed out of one or more tree trunks. At the head of this trough was a platform (B), on which the ore was thrown after being completely crushed. The washer used a wooden scrubber (C) with a long handle to lower the ore into the trough. Once the water had been allowed to enter the trough, the same scrubber was used to agitate the ore (Figure 7b).
Figure 7c displays this information. The water wheel (B) that drives Agricola’s millstone complex system has an axle (A) that is mortised and a toothed drum (C) with teeth set in the side of the rim. These teeth rotate a second drum of extraordinarily durable rundles (D). This drum is positioned around an iron axle (E) that rotates in an iron cup in timber and has a pinion at the bottom. An iron tongue dovetailed into the millstone (F) is attached to the top of the iron axle, which causes the millstone to rotate when the teeth of one drum spin over the rundles of the other. It receives ore from an overhanging machine through a hopper (G) and, after being ground to a powder, is discharged from a round wooden plate (H) into a trough (I), where it flows away and collects on the floor before being transported away and set aside for washing.
In Figure 7d, the Bohemians utilize an osier-tied basket (A) that is a foot and a half wide and deep. It has two handles (B), which hold onto it when moving and shaking it in a bathtub or a small pool almost filled with water. They remove and wash everything that passes through it in a bowl (C), which is higher in the back part (D) and lower and fiat in the front (E). The bowl is shaken in the water while being held by the two handles (F), with the lighter particles floating away and the heavier and mineral portion sinking to the bottom.
One of the first sluice devices was described by Agricola, as shown in Figure 7e. It is situated in a river, stream, or bank and is supported by two stools, the first of which is higher than the second to allow gravel and small stones to flow down the sluice. The washer uses a shovel to deposit sand into the head (A) and then opens the washer to let the water in. The water then drags metal fragments and some sand down into the riffles (B), while the remaining sand and gravel fall into a tub below the sluice. He removes the concentrates and washes them in a bowl when the riffles are full (G, E).
In Figure 7f, the sand is washed in a sizable bowl that can be easily shaken and suspended from a building beam by two ropes. The separation is created using the same theory as contemporary panning. There are only three handles on the bowl (D), one of which they hold in their hands when they shake it. The other two handles are fastened with a rope used to hang the bowl from a ceiling or a crosspiece supported by the forks of two upright posts staked into the ground. In order to examine the ore, miners frequently wash it in a small bowl (E). This bowl is shaken while being held in one hand and banged with the other.

2.6. The Gold Rush Era in the Rivers of Western America (19th–Early 20th Century)

In 1849, a wave of people known as “49 ers” made an effort to make the long journey to California. By the end of the year, the non-native population in America had grown to about 100,000, a significant increase compared to 20,000 at the end of 1848 and only 800 in March 1848. Gold mining towns developed across the territory to serve the needs of the 49 ers, looking for profitability by this time. Following 1850, surface gold in California largely disappeared, even as miners continued to arrive. However, gold mining continued through the 1850s, peaking in 1852 when total profits from production reached about $81 million. After that year, total annual profits gradually decreased to $45 million by 1857. Settlement in California continued; however, by the decade’s end, the state’s population declined significantly [41].
During the gold rush period, the extraction of alluvial deposits was based on manual labour and water-based methods, thus mining sites were usually located along streams in tributary canyons. Miners used various equipment, including rocker (or cradle) boxes, Long Toms, and sluice boxes, and handheld equipment like pans, picks, and shovels. As time passed, more advanced techniques for mining alluvial deposits were adopted. The construction of dams, water pumps, and ditch-fed sluicing systems became essential for efficient operations.
The introduction of hydraulic mining was one of the most significant improvements in mining alluvial deposits. Miners using these systems provided high-pressure water to wash away the overburdened materials and direct the gold-bearing particles into the sluice boxes. Water cannons, presented in Figure 8, played a vital role in removing impurities and overburden during the mining process. Smaller cannons were also used for washing the gold-bearing gravels within sluice box systems. Hydraulic mining systems flourished from the 1860s to the mid-1880s, when one of the first lawsuits concerning the generation of environmental pollutants was filed, which led to the strict control and end of this process [41]. Dredging was the final evolution of the mining methods for the alluvial deposits of the period, the most successful forms of dredging operated during the 20th century. The dredging fields were located at low altitudes, usually where rivers or large tributary streams emerged from the mountains. It is worth mentioning that the dregging technology originated in New Zealand in 1882. The largest gathering of dredges at work was reported in 1900 with 187 dredges operating among the gravels of the Clutha.
Figure 8. Hydraulic mining at Malakoff Diggings (Historic photograph taken by Watkins).

This entry is adapted from the peer-reviewed paper 10.3390/mining3040034

References

  1. Klemm, R.; Klemm, D. Archaeological Chronology of Gold Mining in Ancient Egypt and Nubian Sudan. In Natural Science in Archaeology; Springer: Berlin/Heidelberg, Germany, 2013; pp. 1–20.
  2. Klemm, D.; Klemm, R. Mining in Ancient Egypt and Nubia. In Encyclopaedia of the History of Science, Technology, and Medicine in Non-Western Cultures; Springer: Dordrecht, The Netherlands, 2008; pp. 1685–1698.
  3. Okrostsvaridze, A.; Gagnidze, N.; Akimidze, K. A Modern Field Investigation of the Mythical “Gold Sands” of the Ancient Colchis Kingdom and “Golden Fleece” Phenomena. Quat. Int. 2016, 409, 61–69.
  4. Boyle, R.W. Gold during the Classical Period. In Gold; Springer: Boston, MA, USA, 1987; pp. 29–38.
  5. Craddock, P.T. Agricola, De Re Metallica: A Landmark in the History of Metallurgy. Endeavour 1994, 18, 67–73.
  6. Trujillo, F.J.; Claver, J.; Sevilla, L.; Sebastián, M.A. De Re Metallica: An Early Ergonomics Lesson Applied to Machine Design in the Renaissance. Sustainability 2021, 13, 9984.
  7. Brooks, W.E.; Öztürk, H.; Cansu, Z. Amalgamation and Small-Scale Gold Mining at Ancient Sardis, Turkey. Archaeol. Discov. 2017, 5, 42–59.
  8. Soe, P.S.; Kyaw, W.T.; Arizono, K.; Ishibashi, Y.; Agusa, T. Mercury Pollution from Artisanal and Small-Scale Gold Mining in Myanmar and Other Southeast Asian Countries. Int. J. Environ. Res. Public Health 2022, 19, 6290.
  9. Velásquez Ramírez, M.G.; Vega Ruiz, C.M.; Gomringer, R.C.; Pillaca, M.; Thomas, E.; Stewart, P.M.; Gamarra Miranda, L.A.; Dañobeytia, F.R.; Guerrero Barrantes, J.A.; Gushiken, M.C.; et al. Mercury in Soils Impacted by Alluvial Gold Mining in the Peruvian Amazon. J. Environ. Manag. 2021, 288, 112364.
  10. Da Costa, M.A.; Rios, F.J. The Gold Mining Industry in Brazil: A Historical Overview. Ore Geol. Rev. 2022, 148, 105005.
  11. Vieira, R. Mercury-Free Gold Mining Technologies: Possibilities for Adoption in the Guianas. J. Clean. Prod. 2006, 14, 448–454.
  12. Brooks, W.E.; Sierra-Giraldo, J.A.; Palacios, F.M. Green Gold—Dirty Gold, Tadó, Dept. Chocó, Colombia. Nat. Resour. 2015, 6, 534–542.
  13. Alekseev, V.S.; Banshchikova, T.S. Rebellious Gold Extraction from Gravity Concentrates and Placer Tailings by Chemical Reagents. J. Min. Sci. 2018, 53, 756–761.
  14. Clarkson, G.; Clarkson, R.; Hitch, M. Exploiting the Malleability of Gold for Placer Concentrate Extraction and Recovery. Miner. Eng. 2016, 94, 38–40.
  15. Knelson, B. The Knelson Concentrator. Metamorphosis from Crude Beginning to Sophisticated World Wide Acceptance. Miner. Eng. 1992, 5, 1091–1097.
  16. Falconer, A. Gravity Separation: Old Technique/New Methods. Phys. Sep. Sci. Eng. 2003, 12, 812865.
  17. Harrell, J.A.; Brown, V.M. The World’s Oldest Surviving Geological Map: The 1150 B.C. Turin Papyrus from Egypt. J. Geol. 1992, 100, 3–18.
  18. Oddy, A. Assaying in Antiquity. Gold Bull. 1983, 16, 52–59.
  19. Lehner, J.W.; Yener, K.A.I. Organization and Specialization of Early Mining and Metal Technologies in Anatolia. In Archaeometallurgy in Global Perspective: Methods and Syntheses; Springer: Berlin/Heidelberg, Germany, 2014; ISBN 9781461490173.
  20. De Jesus, P.; Dardeniz, G. Archaeological and Geological Concepts on the Topic of Ancient Mining. Bull. Miner. Res. Explor. 2015, 151, 231–246.
  21. Lordkipanidze, O. The Golden Fleece: Myth, Euhemeristic Explanation and Archaeology. Oxf. J. Archaeol. 2001, 20, 1–38.
  22. Doumas, C. What Did the Argonauts Seek in Colchis? Hermathena 1991, 150, 31–41. Available online: https://www.jstor.org/stable/23040952 (accessed on 10 July 2023).
  23. Kakridis, I. Greek Mythology; Athenon SA: Athens, Greece, 1986; Volume 5.
  24. Rodríguez, R.M. La Minería Aurífera Romana Del Noroeste de Hispania: Inge-niería Minera y Gestión de Las Explotaciones Auríferas Romanas En La Sierra Del Teleno (León-España). In Nuevos Elementos de Ingeniería Romana (III Congreso de las Obras Públicas Romanas); University of La Rioja: La Rioja, Spain, 2006.
  25. Lima, A.; Matias, R.; Fonte, J.A. Exploração de Depósitos Secundários de Ouro Nas Serras de Santa Justa e Pias (Município de Valongo). In Proceedings of the Atas do 1 Congresso de Mineração Romana em Valongo, Valongo, Portugal, 8–9 November 2014; pp. 40–47.
  26. Del Mar, A. A History of the Precious Metals, 2nd ed.; Cambridge Encyclopedia Company: New York, NY, USA, 1901.
  27. Aller, J.; Bastida, F.; Bulnes, M.; Fernández, F.J.; Poblet, J. Field Trip in Honour of the Work of Prof. Richard J. Lisle. The Roman Gold Mine of Las Médulas; University of Oviedo: Oviedo, Spain, 2013.
  28. Redondo-Vega, J.M.; Alonso-Herrero, E.; Santos-González, J.; González-Gutiérrez, R.B.; Gómez-Villar, A. La Balouta Exhumed Karst: A Roman Gold-Mine-Derived Landscape within the Las Médulas UNESCO World Heritage Site (Spain). Int. J. Speleol. 2015, 44, 267–276.
  29. Hirt, A. Gold and Silver Mining in the Roman Empire. In Debasement. Manipulation of Coin Standards in Pre-Modern Monetary Systems; Butcher, K., Ed.; Oxbow Books: Oxford, PA, USA, 2020; ISBN 978-1-78925-401-3.
  30. Zevgolis, E.N. Gold Metallurgy and Environmental Impacts. The International Experience. In Proceedings of the TEE Conference, Athens, Greece, 6–8 May 2003.
  31. John, L.W. The Art of Heap Leaching—The Fundamentals; The South African Institute of Mining and Metallurgy: Johannesburg, South Africa, 2011.
  32. Pérez-García, L.C.; Sánchez-Palencia, F.J.; Torres-Ruiz, J. Tertiary and Quaternary Alluvial Gold Deposits of Northwest Spain and Roman Mining (NW of Duero and Bierzo Basins). J. Geochem. Explor. 2000, 71, 225–240.
  33. Brooks, W.E. Enigma of Alluvial Gold Mining in Pre-Contact Peru—The Present Is Key to the Past. Archaeol. Discov. 2023, 11, 39–64.
  34. Tripcevich, N.; Vaughn, K.J. Mining and Quarrying in the Ancient Andes; Springer: New York, NY, USA, 2013; ISBN 978-1-46145-199-0.
  35. Berthelot, J. The Extraction of Precious Metals at the Time of the Inka. In Anthropological History of Andean Polities; Cambridge University Press: Cambridge, UK, 2010.
  36. Van Buren, M.; Presta Prof, A.M. The Organization of Inka Silver Production in Porco, Bolivia. In Distant Provinces in the Inka Empire: Toward a Deeper Understanding of Inka Imperialism; University of Iowa Press: Iowa City, IA, USA, 2010.
  37. Fisher, J.R. Gold in the Search for the Americas. Gold Bull. 1976, 9, 58–63.
  38. Brown, K.W. The Lure of Gold, the Wealth of Silver. In A History of Mining in Latin America: From the Colonial Era to the Present; University of New Mexico Press: Albuquerque, NM, USA, 2012.
  39. Frank, L.; Galvin, M.; Skinner, M. Mining and Metallurgy to the Renaissance; Worcester Polytechnic Institute: Worcester, UK, 1999.
  40. Hoover, H.C.; Hoover, L.H. Georgius Agricola, De Re Metallica; Translated from 1556; Dover Publications Inc.: New York, NY, USA, 1950.
  41. Paddison, J.E. 1848–1865: Gold Rush, Statehood, and the Western Movement; California Cultures Project; University of California: Los Angeles, CA, USA, 2005.
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license; additional terms may apply. By using this site, you agree to the Terms and Conditions and Privacy Policy.
This entry is offline, you can click here to edit this entry!
ScholarVision Creations
Feedback