Hydrogels are considered one of the most attractive materials for biomedical applications due to their similarities in mechanical and chemical behavior to natural tissues ^[1][2][1,2]. The water retention capacity of hydrogels is very high in their integrated polymer network [3]. Hydrogels can be prepared using natural polymers, e.g., agarose, alginate, chitosan, collagen, fibrin, gelatin, etc. ^[4][5][4,5], while they can also be made of synthetical synthetic polymers or a combination of natural and synthetic polymers. Hydrogels exhibit mechanical and dimensional responses to the changes in their surrounding environment, such as pH, temperature, and ionic strength [6]. These behaviors represent their potential applicability for drug delivery systems, biomedical adhesives, sensors, tissue reconstructions, fabrication of artificial organs, and more ^[7][8][9][7,8,9]. The self-healing hydrogels (SHH) are hydrogels that show special healing ability. The self-healing property of hydrogel comes from the reversible physical or chemical bonds [10]. Furthermore, SHH also show ionic conductivity and adhesive properties that make them suitable for real-time applications including tissue engineering, cartilage treatment, wound healing treatment, and so on [11]. Moreover, SHH should process enough mechanical toughness to be used as a biomedical material [12].

The development of polymeric hydrogels has become ubiquitous over the last couple of decades [13]. To address the rising demand, researchers are tuning hydrogel quality by changing the synthetic process and bonding mechanisms to introduce mechanical robustness and other properties [9]. High-end mechanical behavior, long-elongation, strain-hardening, and self-healing capability are the significant characteristics of fabricating hydrogel to use as artificial tissue [14]. Most conventional polymeric gels have demonstrated considerable mechanical properties with poor adhesion and self-healing ability, which have restricted their use in sensitive applications such as tissue engineering and drug delivery [15]. However, these properties are difficult to bring together in the same hydrogel effectively [15].

The enhancement of mechanical behavior often produces weak self-healing performance [16]. Assuring mechanical toughness and optimum self-healing performance is a tricky job in SHH development. Efforts have been made to design synthetic hydrogels to provide the desired and unique combination of high mechanical properties with strong self-healing behavior by introducing special types of functional groups to provide various reversible chemical networks of hydrogels, such as hydrogen bonds, ionic bonds, hydrophobic interactions, host–guest interactions, π–π stacking, sometimes special covalent bonds, etc. [17] The most effective strategy for developing tough hydrogels has been observed in polyampholyte hydrogels by introducing a supramolecular system [18].

The Young’s modulus of a gel composite depends on the elastic properties, and this depends on the numbers of both reversible and nonreversible covalent bond active sides present on the composite matrix [19]. Self-healing ability is an intrinsic property, and this particular property of hydrogel either comes from the reversible physical or chemical bonds or the combination of those bonds [20]. Viscous properties of SHH may reduce the modulus of composite hydrogel [21]. As a result, the molecular interactions can happen properly for the viscous region, whereas a hydrogel with a large modulus requires strong bonding with moderate viscous properties [10]. This may reduce the chances of the bond regeneration process and lead to a tough gel with weak healing ability. However, to introduce a mechanically tough but self-healable hydrogel, the proper combination of elastic and viscous properties or viscoelastic property is necessary ^[16][22][16,22]. Recently, Rumon et al. [16] reported the viscoelastic property of their prepared material by the proper combination both of reversible and nonreversible chemical and physical active sides simultaneously.

Building on the concept of the reversible dynamic bond to make healable hydrogels, the scientific community has already introduced several nanoparticles, including graphene sheets and their derivatives such as graphene oxide, carbon nanotube, various metal nanoparticles, etc. ^[12][23][12,23]. These materials provide either dynamic reversible physical or reversible chemical bonds. However, dynamic reversible bonds, including hydrogen bond interactions, π-π stacking interactions, Van der Waals bonding, ionic bonds, etc., and the reversible covalent bonds have been continuously directed to design self-healable but tough hydrogels ^[16][24][16,24]. The biggest weakness of those strategies described is that they cannot address the root cause of the opposite relationship between mechanical toughness and self-healing ability. Dahlquist criterion indicates that as the polymeric materials’ modulus increases, the self-healing ability is decreased, and high self-healing efficiency is difficult to obtain in large modulus hydrogels ^[16][18][25][16,18,25]. For example, Fan et al. [26] reported a conventional hydrogel where tannic acid was used as a crosslinker to crosslink polyacrylamide and polyvinyl alcohol monomer [26]. Though this gel exhibited considerable toughness, it showed a very nominal level of healing ability that was only 40%. A self-healing polyampholyte gel was synthesized by Ihsan et al. [18], of which it was described that, in the increment of the chemical crosslinker, the modulus is also enhanced, resulting in a substantial lower self-healing efficiency from 92.11% to 2.76% [18].

Self-healing hydrogel is an intrinsic polymer, and this special healing ability of hydrogel either comes from the reversible physical or chemical bonds or a combination of those bonds ^[27][31]. Other properties of SHH are conductivity, fast adhesion, and stimuli-responsiveness ^[28][29][30][32,33,34]. More importantly, the biomedical application of SHH should possess enough mechanical toughness [10].

The hydrogel self-healing mechanism possesses similarities with biological systems ^[31][32][35,36]. The healing process progresses through five consecutive individual steps: surface rearrangement, surface approach, wetting, diffusion, and randomization ^[33][34][37,38]. All those steps are facilitated through the molecular interaction of two fractured surfaces, which leads to regeneration or reconstruction of the damaged bonding to ensure the healing process. However, they contains only reversible and dynamic physical and chemical bonds ^[35][39].

The role of physical bond chemistry on the healing ability or healing performance based on reversible non-covalent interactions such hydrogen bonds, hydrophobic interactions, host–guest bond interactions, and ionic or electrostatic interactions is all included in this section. Different self-healing hydrogels show different bonding dynamics. Figure 1 shows the bonding mechanism of functionalized graphene oxide crosslinked polyacrylamide hydrogel [16].

The hydrogen bond is an electrostatic attraction force among hydrogen atoms and electronegative atoms such as oxygen, nitrogen, and fluorine that is covalently bonded with a hydrogen atom ^[36][37][40,41]. It is a dynamic and reversible bond that has a vital impact on developing the SHH system ^[38][39][42,43]. For example, Zhang et al. ^[40][44] reported polyvinyl alcohol-based hydrogels with exceptional self-healing performance when the polymer concentration was around 36% wt. The hydroxyl groups present in the polymer matrix promote hydrogen bond reformation and make the material self-healable ^[40][44]. The donor and acceptor conformations of these hydrogen bonds also considerably influence hydrogen bond formation and affect self-healing behavior. Rumon et al. [16] reported a functionalized graphene oxide-based polyacrylamide gel that provides about 70% healing efficiency. The graphene oxide surface has a large abundance of -OH and COOH groups, which undergo physical bond formation with the polymer chain. As a result, the hydrogel provided up to 70% self-healing ability. In addition to this work, Rumon, with his team, showed the effect of crosslinking on healing kinetics, and reported that, as the degree of crosslinking increased, the graphene oxide based crosslinker (GOBC) crosslinked polyacrylamide (PAM) hydrogels showed faster healing phenomena. Figure 2 shows the stress-strain curve and the healing kinetics of PAM hydrogel with various GOBC crosslinkers [16]. In this researchtudy, the authors showed that the percentage of the healing efficiency increases as time passes, and the highest GOBC containing PAM composite hydrogel possesses maximum and fast healing, while the MBA cross-linked gel composite does not undergo any healing process.

The conformational structure of the donors and acceptors of hydrogen bonds can affect the strength of the bonds, which can also affect how well the self-healing process works ^[41][45]. Zimmerman et al. ^[42][46] proposed that healing efficiency strongly depends on the position or arrangement of lone pair electron donors and acceptor groups, and he demonstrated the mechanism using just alphabetic letters (A and D). Here, A is the lone pair electron and D is the lone pair electron donor. The AA-DDD array has a larger binding constant than the DAA-AAD and ADA-DAD arrangements. A self-healing hydrogel was developed by Zhang et al. ^[43][47] with quadruple hydrogen bonds by using ureido pyrimidinone (UPy). It is possible to undergo dimerization of the UPy moieties by using those quadruple hydrogen bonds. Multiple hydrogen bonds in the hydrogel network enabled the self-healing process ^[43][47]. Ye et al. ^[44][48] developed guanosine and cytosine (nitrogen base)-based SHH that provide self-healing through reversible hydrogen bond interactions among the nitrogen atoms on the guanosine and cytosine and the hydrogen atoms.

Despite their self-healing ability, hydrogels based on hydrogen bonding are less stable in water. To make them stable in an aqueous environment ^[45][49], particular focus has been given to hydrophobic binding interactions. In polymeric gels, hydrophobic monomers are introduced as co-monomers with hydrophilic monomers to prepare a hydrophobic bond-based self-healing hydrogel ^[46][50]. This hydrophobic monomer-based hydrogel provides self-healing performance because of the hydrophobic chain’s free energy and entropy gain. Hydrophobic polymer chains always try to keep away from the aqueous atmosphere of a swollen hydrogel and subsequently retain surface-bound water molecules from the hydrogel matrix ^[47][51]. More importantly, hydrogels undergo a self-healing process through entropy or free energy gain, which results in entropy change. For instance, Tuncaboylu et al. ^[48][52] and Deng et al. ^[49][53] developed several hydrogels based on hydrophobic interactions, and most of those gels exhibited satisfactory self-healing performance. Owusu-Nkwantabisah et al. ^[50][54] prepared self-repairing gels from a hydrophilic monomer poly(N-isopropyl-acrylamide). The self-healing properties of hydrophilic hydrogels could be affected by temperature, and healing efficacy increases as the temperature rises ^[50][54]. Mihajlovic et al. ^[51][55] and Tuncaboylu et al. ^[48][52] prepared a self-healing hydrophobic micellar hydrogel by mixing a hydrophilic monomer (acrylamide) and a hydrophobic monomer (stearyl methacrylate sodium dodecyl sulfate). In all those cases, adding a small quantity of salt to the stearyl methacrylate sodium dodecyl sulfate aqueous solution may lead to the micelle formation and solubilization of hydrophobes within the stearyl methacrylate sodium dodecyl sulfate micelles. Additionally, stearyl methacrylate sodium dodecyl sulfate micelles in the matrix with time-dependent dynamic moduli exhibited large strain values with better self-healing properties ^[48][52]. In contrast, in time-independent dynamic moduli, hydrogels demonstrated substantial mechanical properties but no self-healing ability.

Most traditional synthetic self-healable hydrogels based on hydrophobic interaction are usually brittle and have limited mechanical features ^[52][53][70,71]. This drawback can severely restrict their applications, as they often need high mechanical toughness and load-bearing ability. However, host–guest interaction-based supramolecular hydrogels have shown a prominent approach to overcoming this drawback. In host-guest interactions, more than two molecules form a complex using dynamic non-covalent interactions such as hydrogen bonding, van der Waals attraction forces, and electrostatic or coordination bonds ^[54][72]. Moreover, this interaction involves a particular assembly among two compounds, like a lock and key by inclusion thanks to their complementary structures. Therefore, through dynamic reversible and non-covalent bond interactions, a guest molecule takes place inside of a host molecule of a second species ^[55][73]. The reversible behavior of the interactions in this assembly provides a dynamic character to the crosslinking formed in this way that has been used in the self-healing processes ^[56][74]. Crown ether, cyclodextrin ^[57][75], and cucurbituril are typical examples of host molecules that are mainly responsible for self-healing properties ^[58][59][60][76,77,78]. In addition, adamantine, cholic acid, ferrocene, or azobenzene are typical guest molecules accommodated by various guest species with different binding affinities, making it a stable insertion complex with CDs and their derivatives ^[58][61][76,79]. Deng et al. ^[62][80] synthesized several conductive hydrogels that exhibited self-healing properties. These hydrogels could be used for biomedical applications where electroactivity is needed, as biosensors, as reported by Deng et al. ^[62][80], and as a carrier for therapeutic medium or agent, as reported by Chen et al. ^[63][81]. The typical mechanism of the host–guest interaction-based redox-active self-healing hydrogel system is shown in Figure 3.

In a recent study, electrostatically attractive oppositely charged ions crosslinked hydrogels have received focus because of their high mechanical properties ^[64][82]. These electrostatic attractions among the oppositely charged polyions in the hydrogel matrix make it self-healable using the ionic mechanism. Moreover, external conditions such as the degree of ionization of the weak polyelectrolytes, salt conditions, etc., may influence this straightforward ionic mechanism for self-healing ^[65][83]. The migration velocity of free ions and free polyelectrolytes may also affect these electrostatic network properties. It can be influenced by the molecular weight of electrolytes or ions. Dynamic ionic bonding between anionic monomers such as poly(acrylic acid) and ferric ions has been employed to prepare mechanically tough hydrogels; these bonding networks have exhibited the ability to be recovered after damage ^[66][84]. The catechol moiety and its derivatives show coordinated bonding with metal ions such as ferric, calcium, or cupric ions. The possible mechanism of metal ion coordinate self-healing hydrogel is illustrated in Figure 4.

Most mechanically tough polymeric gels have been synthesized by using irreversible covalent interactions ^[54][72]. However, reversible crosslinked covalent bonds in dynamic chemistry can provide the self-healing character ^[67][85]. In the chemically self-healing hydrogel system, damaged or cracked polymer chain networks can regenerate their bonding interaction through reversible covalent bonds such as disulfide bond, dynamic imine bond, and Diels-Alder reaction.

The imine (or Schiff base) is a molecule containing a double bond of carbon–nitrogen developed when an amine reacts with an aldehyde or ketone nucleophilically ^[68][86]. They can be aromatic or aliphatic. Many SHH have been developed using these bases ^[69][70][71][87,88,89]. The aromatic Schiff base-based hydrogel demonstrates higher mechanical toughness than aliphatic Schiff bases ^[72][73][90,91]. Zhang et al. ^[68][86] have reported dynamic imine bond-based self-healing gels for biological applications. Most of the time, benzaldehyde-functionalized polyethylene-glycol (PEG)-based hydrogels were synthesized with aromatic Schiff bases. To prepare those hydrogels, the Schiff-base DF-PEG solution was mixed with either synthetic polymeric materials such as glycol chitosan solution or natural polymer solution such as cellulose solution, depending on their properties and potential uses. Moreover, these self-healable hydrogels are also applied in various biomedical systems, such as three-dimensional cell culture, regulated biological molecular release, blood capillary development, CNS recovery, and so on ^[70][88]. A pH-dependent self-healable hydrogel has been designed by Guo et al. ^[74][92]. They demonstrated that the self-healing Schiff base-based hydrogels are dynamic and their efficiency is strongly influenced by solution pH, as the phenylboronic ester complex has a pH effect on the complex formation, as shown in Figure 5. According to this research, the pH level requirement must be met to achieve sufficient healing efficiency to be used in biomedical applications.

Fu et al. ^[75][105] developed an imine and acylhydrazone from a dynamic bond Schiff- base based hydrogel system that has considerable self-healing in which sodium alginate was used to crosslink the N-carboxyethyl chitosan and adipic acid. They demonstrated excellent bond stability in self-healing. Injectable SHH were introduced by Yesilyurt et al. ^[76][106]. They are composed of four-armed PEG terminated with phenylboronic acid, and four-armed PEG terminated with diol bonds. According to that study, the pKa value of the phenylboronic acid group is strongly linked to hydrogels’ self-healing properties and mechanical properties ^[76][106]. The hydrogel was hard and brittle when prepared at a pH that was just higher than the pKa of the phenylboronic acid group, and the capacity to self-heal was observed to decrease as the pH was raised. The hydrogels demonstrated good self-healing abilities when they were prepared close to the pKa value of the phenylboronic acid group. Gel was not formed in the pH below the pKa value. Moreover, the conformation of the diol groups in the polymer chains can also affect the self-healing process of the phenylboronic ester complex. For example, polysaccharides and phenylboronic acid were used to investigate the binding constants of Schiff base in different diol positions or conformations by Yesilyurt et al. ^[76][106]. He noted that phenylboronic acid prefers cis-diol groups over trans-diol groups. Although boron-cis-diol complexation is more thermodynamically strong and likely to repair after disintegrating, the hydrogel’s self-healing capacity is expected to improve when cis-diol is incorporated into polymers used to produce the hydrogel network. The phenylboronic ester complexation-based self-healing hydrogel SHH can be used in clinical applications. Kotsuchibashi et al. ^[63][77][81,107] prepared a series of SHH. Those gels can be used for glucose sensing, medication release, and 3D cell growth.

Like imine bond-based self-healing hydrogel systems, dynamic reversible disulfide bond-based covalent chemistry strongly depends on pH and redox potential ^[78][79][108,109]. The dynamic reversibility of the disulfide bonds can be explained in terms of disulfide/thiol exchange reactions. Zhang et al. ^[80][110] designed a hydrogel that can heal spontaneously using a tri-block copolymer (ABC). This polymer contains dithiolane groups in the form of an A-block, and these groups are crosslinked using reversible ring-opening polymerization, which is mediated by disulfide exchange reactions between 1,2-dithiolanes and dithiols. When subjected to external stimuli such as changes in pH and temperature, the hydrogel that has been prepared goes through a reversible sol-gel transition ^[80][110]. The as-prepared polymer hydrogel restored itself (around eight times the strain value) after several rheological deformations at 25 °C and was reported as a promising candidate for drug delivery. However, the disulfide exchange of 1,2-dithiolane can reconstruct their chain networks in a solution that has a pH of 7 or higher than 7, and the temperature of the surrounding environment can further regulate the degree of reformation. Tu et al. ^[38][42] proposed a special type of hydrogel that shows moderate self-healing performance by using both disulfide bond and imine bonding mechanisms. The polyethylene oxide (PEO) hydrogels exhibited variable self-healing efficiency at different pH because these two dynamic covalent reversible bonds work at different pH conditions (the pKa value significantly influences these two complexation processes’ dynamic systems that further influence the self-healing ability) ^[38][42]. Within this PEO hydrogel matrix, the disulfide bond exchange reactions took place at basic pH, acylhydrazone exchange reactions occurred at low pH or acidic pH, and these covalent bonds were not capable of reforming at neutral pH.

Temperature-sensitive Diels-Alder reaction is another dynamic covalent bond chemistry in SHH ^[81][111]. The Diels-Alder reaction is a ring-opening reaction between a diene and a dienophile ^[82][112]. However, the Diels-Alder reaction has limited biomedical uses since it requires high temperatures and extended times to break and reform. However, the Diels-Alder has recently become popular in polymeric hydrogels to improve its medical applications by combining with other reversible bonds, including the acylhydrazone bond, imine bond, coordination, and electrostatic interaction ^[54][72].