Minimally invasive mitral valve surgery is evolving rapidly since the early 1990’s and is now increasingly adopted as the standard approach for mitral valve surgery. It has a long and challenging learning curve and there are many considerations regarding technique, planning and patient selection when starting a minimally invasive program.
Significant Aortic, Iliac, or Femoral Disease That Prevents Safe Retrograde Arterial Perfusion |
---|
Left ventricular ejection fraction < 25% |
Severe right ventricular dysfunction |
Pulmonary artery pressure > 70 mmHg |
Aorta > 4 cm if endo-aortic balloon being used |
Significant mitral annular calcification |
Patients with more than mild aortic regurgitation |
Kyphoscoliosis and pectus excavatum |
Morbidly obese and extremely muscular patients |
Previous right thoracotomy or expected adhesions in the right chest |
Advanced renal- or liver disease, significant pulmonary disease |
5. Avct: Minimailable techniques and safety considerations
5.1.ly invasive mitral valve surgery is evolving Srafety of the minimally invasive techniquepidly since the early 90's and is now increas
Muingly adoptiple techniques are available at each step of sed as the standard approach for mitral valve surgery (e.g. chest access, cardiopulmonary bypass configuration, aortic occlusion). In the early days of MIMVS, . It has a long and challenging learning curve and there were concerns about the safety of thisare many considerations regarding technique, especially with regard to aortic injury and stroke (23). Since the 1990s, results have improved significantly due to better pre-operative planning, planning and patient selection when starting a minimally invasive program. In the current review, we provide an overview of all considerations and the decision-making process during the learning curve.
1. aIntrodjustuction
Minimeally ints to surgical technique and as more experienced centers have become familiar with the technique. A recent STS database study from 2021 and recent meta-analysis show similar results for MIMVS versus sternotomy (4-9, 11, 39, 40). To initiate the MIMVS program, an institute should begin with the lowest risk patients with non-complex valve pathology and the most appropriate anatomy for the access. In a more advanced stage, more advanced techniques can be applied to expand the appropriate patient population that willvasive mitral valve surgery (MIMVS) has evolved rapidly since the beginning in the early ’90 (1-3) and is now increasingly adopted as the standard approach for mitral valve surgery by many centers (4-10). The STS database showed an increase from 15,5% (2014) to 24,6% (2018) of all mitral valve procedures in the United States being approached by a less invasive access (11). In experienced centers, rates of minimally invasive access have been reported up to 74% (12) with good short- and long-term results in primary (4-6, 15) and in redo mitral valve surgery (7-10), equal repair rates as in sternotomy approach (13, 14).
2. bLenefit from the arning curve of minimally invasive technique. However, movingmitral valve surgery
MIMVS towhards more complex and less invasive techniques should never compromise operative safety and the valve repairability. Available techniques for each steps a long learning curve due to multiple factors complicating the learning process. The decrease of the operation (access, cardiopulmonary bypass, aortic occlusion) are discussed in the section below.
5.2. L surgical working space and remotely working with long shafted instruments whiless invasivthe surgical access and visualization of the mitral valvperspective is changed to a videoscopic view, is technically more
In litderature, access for MIMVS has been described through lower mini sternotomy, right parasternal incision or right anterolateral mini-thoracotomy. Different manding than working in a wide surgical field with shorter instruments. For the extra-corporeal circulation, the procedure requires peripheral canulation (femoral, axillary or direct aortic) with specific aortic clamp techniques have been described for the right mini-thoracotomy (surgery under direct vision with video assistance, or totally thoracoscopic approach and robotic assisted approach) and it is important that the team can adapt to one technique (41). Highly specialized(e.g. Chitwood clamp or endo-aortic balloon). There must be insight into the pitfalls for peripheral cannulation techniques. Adding more complex techniques, such as the endo-aortic balloon will require extra attention from the surgeon while there is already full focus needed for the surgical procedure.
The number of procenters use a peri areolar access for improved aesthetic results (42, 43), but the most common incision site is the right minidures required to complete the learning curve is reported at 75 – 125 cases and at least 2 surgeries per week to maintain optimal surgical outcome (12). To train thoracotomy. For the direct view technique, the thoracotomy incision is placed slightly more lateral compared to the totally thoracoscopic technique, scopic skills and surgical sequence of MIMVS, training modules and simulators are available to shorten the learning curve (16, 17).
3. Benefits an which the incision is placedd limitations of minimally invasive access
3.1. morBe anterior and the camera is placednefits of minimally invasive access
In moliterature laterally, directly in line with thea range of advantages is described when mitral valve. Both 2D and 3D cameras can be used, of which the 3D camera provides a very realistic image of the intrathoracic space, allowing best estimation of the depth for optimal accuracy. All instruments used are specialized long shafted instruments for endoscopic cardiac surgery.
Figure 3. Setup of a MIMVS procedure by right anterolateral mini thoracotomy. Starting from the bottom of the soft tissue retractor in clockwise direction: Carbon dioxide insufflator, Transthoracic Chitwood clamp, video port and left atrial retractor.
Th surgery is performed via minimally invasive access. A reduction of blood transfusions, post- operative atrial fibrillation, ventilation time, length of stay in intensive care unit or hospital and risk of deep sternal wound complications are reported robotic assisted approach is the most complex to learn and has a learning curve beyond mini thoracfor MIMVS (18, 19). In addition, minimally invasive access showed improved quality of life and faster return to daily activity compared to sternotomy (44). Iin the robotic assisted technique, a early postoperative phase (first 3 months) (20, 21).
Figure 1. Marking of the incisions for MIMVS and the incision for conversion to sternotomy
3D.2. camera is used to visualize the chestLimitations of minimally invasive access
MIMVS andis robotic arms are installed through ports and a variety of instruments can be inserted (e.g. scissors, diathermia, forceps). Lack of tactile feedback has not been experienced as troublesome in experienced robotic surgeons due to the realistic image with the 3D camera and the intuitive instruments with 360-degree freedom of motion. The disadvantages of this technique are more pain experience aby no means a risk-free procedure, it has many advantages for the patients but it carries specific risks: a potentially higher stroke risk, groin complications, aortic dissection, longer cardiopulmonary bypass and aortic occlusion time are described. Concomitant procedures in MIMVS are usually limited to tricuspid valve surgery, closure of defects in the atrial septum and rhythm surgery. Chest deformations (e.g. pectus excavatum) or adhesions in the right thorax (e.g. prior pneumothorax or trauma) can limit the thoracic incisiview in MIMVS.
4. Cons (poiderts), higher costs and complexations in pre-operative planning due to the avand patient selection during the learning curve
4.1. Pre-operatilability of tve planning and imaging
When robot (45).
5.3. Cstardtiopulmonary bypass: arterial cannulang a MIMVS program, careful patient selection
C arndiopulmonary bypass can be organized peripherally and centrally with a variety of configurations for many reasons. For peripheral cannulation, arterial access is most frequently obtained through the femoral artery, percutaneously (Seldinger technique) or via a groin incision, as it is a simple and reproducible technique that does not interfere with the surgical field. Whenever the femoral artery is inaccessible (e.g. in case of severe ilio-femoral planning is necessary to establish a safe and successful program. A dedicated multidisciplinary mitral valve heart team can help select the best treatment (MIMVS vs. sternotomy vs. trans-catheter treatment vs. conservative) for each individual patient and is proven to improve long-term survival (22). In addition to the standard preoperative examinations (e.g. Chest X-ray, blood tests, transthoracic and/or trans-esophageal echocardiography and coronary angiogram), a thoracic CT scan and aortic CT from the femoral vessels to the aortic valve provide important information for surgical planning. Based on these images, calcifications, stenosis and tortuosity or thrombus in mitral annulus, thoracic deformations, the position of the mitral valve in the thoraco-abdominal aorta), an 8mm Dacron graft can be sewn onic cavity and distance to the subclavian artery for arterial cannulation (46).
Fternum is objectified and the optimal position of thoracic central arterincision can be predicted.
4.2. Patiaent sel cection
Contrainnulation, the cannula enters the chest through the mini thoracotomy or through an extra port and is inserted directly into the aorta, comparable to tradidications for MIMVS are safety related factors that expose unnecessary risks which are not in proportion with the benefits of less invasive access. Relative contraindications reported by the International open cardiac sSociety for Minimally Invasive Cardiothoracic Surgery. The (ISMICS) are shown in table 1 (23).
Table 1. Reladtivantage of direct aortic or subclavian artery cannulation is an antegrade e contraindications and concerns for MIMVS reported by the International Society for Minimally Invasive Cardiothoracic Surgery (ISMICS).
Significant aortic, iliac, or femoral disease that prevents safe retrograde arterial perfusion |
Left ventricular ejection fraction < 25% |
Severe right ventricular dysfunction |
Pulmonary artery pressure > 70 mmHg |
Aorta > 4 cm if endo-aortic balloon being used |
Significant mitral annular calcification |
Patients with more than mild aortic regurgitation |
Kyphoscoliosis and pectus excavatum |
Morbidly obese and extremely muscular patients |
Previous right thoracotomy or expected adhesions in the right chest |
Advanced renal- or liver disease, significant pulmonary disease |
Tablooe derived flow towards the carrom Ailawadi et al. 2016 (33).
4.3. Cotnsid arteries which decreerations of mitral valve pathology during learning curve of MIMVS
Pasties the risk of stroke innts with complex repair, such as patients with atherosclerotic disease or intra-aortic thrombus, in whom plaques and thrombi can be embolized during retrograde perfusion, causing stroke. However, an extra cannula in the surgical working field can interfere the surgery. A recent systematic review showed that retrograde perfusion might increase stroke risk in MIMVS compared to antenterior leaflet or bi-leaflet prolapse, should be avoided early in the learning curve as minimally invasive access should not compromise the outcome valve repair. Experienced centers have reported excellent long-term results of complex repairs (e.g. Barlow’s disease) through MIMVS with freedom from re-operation up to 93.8% in 10-years follow up and freedom from greater than 2+ grade perfusion, but has no influence on mortality and renal failure (47mitral regurgitation up to 88.4% in 10- years follow up (24, 25).
5. HowAvailable tever, as mentionchniques and safety considerations
5.1. Safedty by the authors, the of the minimally invasive techniques
Multincpluded studies were retrospective observational studies without a pre-operative imaging protocol ande techniques are available at each step of surgery (e.g. chest access, cardiopulmonary bypass configuration, aortic occlusion). In the early days of MIMVS, therefore the association of stroke were concerns about the safety of this technique, especially with retrograde perfusion might be biased by selection. There was only one study with a gard to aortic injury and stroke (19). Since the 1990s, results have improved significantly due to better pre-operative imaging protocol, in which patients planning, adjustments to surgical technique and as more experienced centers have become familiar with tortuous and/or atheromatous aortoiliac-femoral arteries were selhe technique. A recent STS database study from 2021 and recent meta-analysis show similar results for MIMVS versus sternotomy (4-9, 11, 26, 27).
Figure 2. Setup of a MIMVS procedure by right anterolateral mini thoracotomy. Starting from the bottom of the soft tissue retractor in clockwise direction: Carbon dioxide insufflator, Transthoracic Chitwood clamp, video port and left atrial retractor.
The roboticted for central cannulation. There was no difference in stroke rate of both cannulation assisted approach is the most complex to learn and has a learning curve beyond mini thoracotomy (28). In the robotic assisted techniques, suggesting that these pati, a 3D camera is used to visualize the chest and robotic arms are installed through ports and a variety of instruments could benefit fran be inserted (e.g. scissors, diathermia, forceps).
5.3. Cardiopulm a modifiedonary bypass: arterial cannulation
Cardiopulmonary bypasstrategy (48). In the early experience of a center, can be organized peripherally and centrally with a variety of configurations for many reasons. For peripheral femoral cannulation is the safest, simplest and , arterial access is most frequently applied technique. The pre-operative CT scan will aid in selection of patients without the complicating vascular anatomy to reduce the risk of stroke and vascular complications. In a more advanced stage, a modified cannulation strategy will expand the patient population that benefit from the minimally invasive accessobtained through the femoral artery, percutaneously (Seldinger technique) or via a groin incision, as it is a simple and reproducible technique that does not interfere with the surgical field. Whenever the femoral artery is inaccessible (e.g. in case of severe ilio-femoral calcifications, stenosis and tortuosity or thrombus in the thoraco-abdominal aorta), subclavian or central cannulation can be used. (29).
Figure 43. Peripheral arterial and venous cannulation in the right groin. Standard arterial cannula for direct aortic cross clamp technique. When using an endoaortic balloon, there is a sidearm in the arterial cannula to insert the balloon. 5.4. Cardiopulmonary bypass: Venous cannulation As in arterial cannulation, peripheral venous cannulation is most frequently used in MIMVS. Access is obtained through the femoral vein, percutaneously (Seldinger technique) or through a groin incision, by inserting a two staged cannula positioned with the tip in the superior vena cava under TEE guidance, draining the superior and inferior caval vein. For tricuspid valve surgery or closure of an atrial septum defect, it is preferable to drain both caval veins separately, snaring both caval veins when opening the right atrium to prevent air lock in the extracorporeal circulation. When preferred an additional cannula can be inserted through the interna jugular or subclavian vein next to the femoral cannula (with the tip just below the diafragm) for separate caval venous drainage. 5.4. ThCardis technique is also indicated iopulmonary bypass: Venous cannulation mitral valve Asurgery in patients with a vena cava filter (40) to prevent dislocation of the filter. Centarterial cannulation, peripheral venous cannulation is lessmost frequently appliused in MIMVS since it. Access is obstructing the surgical field. It is recommended to familiarize the team with the above tained through the femoral vein, percutaneously (Seldinger techniques before starting a MIMVS program. In the early experience, ) or through a groin incision, by inserting a two staged venous cannula in the femoral vein ispositioned with the tip in the superior vena cava under TEE guidance, draining the simplest to learn. However, pre-operative CT planning to discover anatomical variants (e.g. Interrupted inferior vena cava or persistent left vena cava superior) and strict guidance with TEE duringuperior and inferior caval vein. For tricuspid valve surgery or closure of an atrial septum defect, it is preferable to drain both caval veins separately, snaring both caval veins when opening the right atrium to prevent air lock in the extracorporeal circulation. When preferred an additional cannula can be inserted through the insertion of the terna jugular or subclavian vein next to the femoral cannula is mandatory to avoid displacement injuries and to ensure adequate(with the tip just below the diafragm) for separate caval venous drainage. 5.5. Techniques for aortic occlusion and de-airing In literature, there are two techniques described for aortic cross clamping in MIMVS: the endo-aortic balloon occlusion and the direct transthoracic aortic clamp (e.g. Chitwood clamp).Compared to conventional heart surgery, the surgeon is most accustomed to the direct transthoracic aortic cross-clamp and is therefore most easy to handle (4930). For the administration of cardioplegia in this technique, an aortic root vent must be placed. Removal of this vent after releasing the clamp can be challenging. One of the techniques is to remove the aortic root vent after the de-airing process and before releasing the clamp. An alternative technique is to administer retrograde cardioplegia in the coronary sinus. A catheter can be placed either by the anesthetist or the surgeon under direct view after snaring both the superior and inferior caval vein. In this technique, the patient is placed in Trendelenburg during the whole procedure and a left vent can be inserted for de-airing. Using this aorta clamp, the surgeon has to take care not to damage the left atrial appendage or the pulmonary artery. An alternative for direct aortic occlusion with a clamp is the endo-aortic The use of the endo balloon, which is inserted via a side branch of the arterial femoral cannula. The use of the endo balloon was recen was recently described in detail by van Praet et al (50, 5131, 32). In brief, the balloon occludes the aorta and cardioplegia is administered through the balloon. During the aortic occlusion, close monitoring of the pressures in the aortic root, the balloon itself and the radial artery pressure are important. Migration of the balloon is possible whenever there are changes in the pressures, such as during the start and stop of administration of cardioplegia, opening the left atrium and changes in cardiopulmonary bypass flow. In redo-surgery, the balloon can be very useful to occlude the aorta without necessity to perform adhesiolysis. After initial concerns of stroke and aortic injuries in the early days of MIMVS by the use of the endo-aortic balloon (52), these catastrophic complications have decreased (53). Knowledge and experience of regulating pressures in the aorta and balloon during the procedure have improved surgical outcome and studies have shown equal results compared to cross clamping (54, 55). Close communication with the perfusionist and anesthetist is necessary to prevent injuries associated with balloon migration such as stroke and aortic dissection. When starting MIMVS, the direct transthoracic aortic clamp is the easiest to handle and for the team in training probably the safest technique. The advantage of the endo-aortic balloon is mostly in redo surgery as aortic occlusion can be obtained without adhesiolysis. However, such a technique should only be considered if the surgical team has sufficient experience in access and repair techniques to also focus on the endo-aortic balloon. Planning the procedure, it is important to choose for the technique which is the most appropriate for the surgical team experience. 5.6. Hypothermic fibrillary arrest In selected patients, such as in redo surgery (especially in patients with patent internal mammary artery grafts after CABG), a calcified ascending aorta without safe clamping site (hostile aorta) or whenever the endo-aortic balloon is contra indicated, hypothermic fibrillary arrest can provide safe myocardial preservation., however Iin patients with more than mild aortic valve regurgitation the vision can be hampered by retrograde blood. This can be overcome by introducing a second suction device in the left ventricle. In some patients a short stop of the heart lung machine at 25 degrees Celsius in Trendelenburg position can be very helpful to improve vision of especially the posterior annulus. De-airing can be done by leaving a vent in the left ventricle until sinus rhythm is restored and TEE confirm no residual air in the left ventricle. Experienced centers in MIMVS have reported outcomes of this technique with good results (7, 8, 10). However, since this technique requires extensive surgical experience, it should not be applied during the learning curve. 5.7. Valve repair and replacement techniques Repair rates of MIMVS have been reported to be comparable to sternotomy approach (13, 14). All techniques for mitral valve repair are feasible through minimally invasive access, although there is a trend towards ‘respect’ rather than ‘resect’ in MIMVS. Recent studies have shown that the neochord technique showed better long-term results than the resection technique in patients with degenerative disease who underwent mitral valve repair through minimally invasive access (5633, 5734).
Figure 4. View on the mitral valve in MIMVS. A. Prolapse of P2 segment B. Placement of neochords on the prolapsing segment C. Adjusting of the height of the neochords D. Result of mitral valve repair Conversion to sternotomy is reported at 1-2% in large series of experienced centers (4-6) and can be divided in an intended and unintended sternotomy. A perioperative unintended conversion is an emergency sternotomy due to a lesion of a major vascular structure or the heart (e.g. aortic dissection, atrioventricular dissociation). An intended conversion is a perioperative anticipated conversion to sternotomy due to inaccessible anatomy for MIMVS (e.g. unexpected peri-operative pulmonary adhesions). The Leipzig group have analyzed their conversions to sternotomy and reported main reasons were major bleeding (53%), severe pulmonary adhesions (18%) and type A aortic dissection (15%)(58). Potential bleeding site were the left atrial appendage (due to clamping) and left ventricular apex (due to the water tube for the water test). Awareness of these above-mentioned risks can prevent such complications. During the standard preparations on the operating room before minimally invasive surgery, marking of the incision for sternotomy can aid in such an emergency situation (figure 5).
In most cases of such an emergency conversion (such as for bleeding or aortic dissection), the patient is already on cardiopulmonary bypass. In case of a major bleeding, a cardiotomy suction sump can be placed in the chest, followed by an emergency sternotomy to repair whatever is causing the bleeding. Whenever there are pulmonary adhesions, there is enough time to perform a standard sternotomy to proceed with the surgery. MIMVS is increasingly adopted worldwide as the standard approach for mitral valve surgery due to less surgical trauma resulting in faster postoperative recovery and improved functional outcome. MIMVS is a complex technique with a long learning curve. The ideal case to start with is a mitral valve replacement or a straight forward mitral valve repair without pulmonary hypertension in a non-obese patient with good left ventricular function, no mitral calcification, no chest deformity, no previous cardiac surgery and no adhesions in the right chest. The most reproducible and simplest technique is access through right mini thoracotomy (totally thoracoscopic or with video assistance and direct view), cardiopulmonary bypass through peripheral femoral arterial and venous cannulation and aortic occlusion with a direct transthoracic clamp. In a more experienced stage, more complex patients can be operated on with more complex techniques, such as the use of the endo-aortic balloon, robotic assistance and patient specific modified cannulation configurations. However, moving towards more complex techniques should never compromise operative safety and reparability of the mitral valve. The number required to complete the learning curve is currently reported at 75 – 125 cases and at least 2 cases per week to maintain optimal surgical outcome. T Rechnology (such as a training simulator) can dfecrease this number, but is not yet confirmed by rencestudies.[13][14]
Figure 5. MScarking of the incisions for MIMVS and the incision for conversion to sternotom of minimally invasive access for mitral valve surgery