3D Patient-Specific Virtual Models
  • View Times: 23
  • |
  • Release Date: 2022-03-30
  • three-dimensional image
  • anatomical models
  • endometriosis
  • magnetic resonance imaging
Video Introduction

This video is adapted from 10.3390/medicina58010086

In recent years, 3D printing has been used to support surgical planning or to guide intraoperative procedures in various surgical specialties. An improvement in surgical planning for recto-sigmoid endometriosis (RSE) excision might reduce the high complication rate related to this challenging surgery. The aim of this video was to build novel presurgical 3D models of RSE nodules from magnetic resonance imaging (MRI) and compare them with intraoperative findings.

Full Transcript
1000/1000
Hot Most Recent
©Text is available under the terms and conditions of the Creative Commons-Attribution ShareAlike (CC BY-SA) license; additional terms may apply. By using this site, you agree to the Terms and Conditions and Privacy Policy.

Confirm

Are you sure to Delete?
Yes No
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Raimondo, D.; Borghese, G.; Raffone, A. 3D Patient-Specific Virtual Models. Encyclopedia. Available online: https://encyclopedia.pub/video/video_detail/263 (accessed on 31 July 2024).
Raimondo D, Borghese G, Raffone A. 3D Patient-Specific Virtual Models. Encyclopedia. Available at: https://encyclopedia.pub/video/video_detail/263. Accessed July 31, 2024.
Raimondo, Diego, Giulia Borghese, Antonio Raffone. "3D Patient-Specific Virtual Models" Encyclopedia, https://encyclopedia.pub/video/video_detail/263 (accessed July 31, 2024).
Raimondo, D., Borghese, G., & Raffone, A. (2022, March 30). 3D Patient-Specific Virtual Models. In Encyclopedia. https://encyclopedia.pub/video/video_detail/263
Raimondo, Diego, et al. "3D Patient-Specific Virtual Models." Encyclopedia. Web. 30 March, 2022.
Video Production Service
Feedback