Your browser does not fully support modern features. Please upgrade for a smoother experience.
3D Flow over the DTMB 4119 Propeller
Academic Video Service
  • View Times: 87
  • |
  • Update Date: 26 Jun 2023
  • Flow simulation
  • DTMB 4119
  • Propeller
  • STAR CCM+
  • Simulation
Video Introduction

This video shows the simulation of propeller conducted using STAR CCM+. In this video 3d surf/ iso-surface is used for creation of post processing.

Full Transcript
${ textCharacter }/${ maxCharacter }
Submit
Cancel
There is no comment~
${ textCharacter }/${ maxCharacter }
Submit
Cancel
${ selectedItem.replyTextCharacter }/${ selectedItem.replyMaxCharacter }
Submit
Cancel
Confirm
Are you sure to Delete?
Yes No
Content is available under the terms and conditions of the Creative Commons Attribution (CC BY) license; additional terms may apply. By using this site, you agree to the Terms and Conditions and Privacy Policy.
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Loya, A. 3D Flow over the DTMB 4119 Propeller. Encyclopedia. Available online: https://encyclopedia.pub/video/780 (accessed on 02 September 2026).
Loya A. 3D Flow over the DTMB 4119 Propeller. Encyclopedia. Available at: https://encyclopedia.pub/video/780. Accessed September 02, 2026.
Loya, Adil. "3D Flow over the DTMB 4119 Propeller" Encyclopedia, https://encyclopedia.pub/video/780 (accessed September 02, 2026).
Loya, A. (2023, June 22). 3D Flow over the DTMB 4119 Propeller. In Encyclopedia. https://encyclopedia.pub/video/780
Loya, Adil. "3D Flow over the DTMB 4119 Propeller." Encyclopedia. Web. 22 June, 2023.
Academic Video Service
Feedback