Geometric Design of Suburban Roundabouts: Comparison
View Latest Version
Please note this is a comparison between Version 2 by Vicky Zhou and Version 1 by Saša Ahac.

A modern roundabout is an intersection with a circulatory roadway at which the vehicle speed is low, and the traffic is continuous and circulating in one direction around the central island towards the exits at the approach legs. Modern roundabout design is an iterative process that is composed of the following steps: (1) the identification of the roundabout as the optimal traffic solution; (2) the definition of the number of lanes at the intersection based on the required capacity and the level of service; (3) the initial design of the roundabout geometry; (4) design vehicle swept path, the fastest path analysis, and visibility performance checks; and (5) detailed roundabout design if the results of the performance checks are in line with the design recommendations. Initial roundabout geometry design elements are not independent of each other; therefore, care must be taken to provide compatibility between them. An overview and a comparative analysis of the initial geometric design elements for suburban single-lane roundabouts defined in roundabout design guidelines and norms used in Croatia, Austria, France, the Netherlands, Germany, Serbia, and Switzerland is given in this entry.

  • approach alignment
  • outer radius
  • circulatory roadway
  • apron
  • splitter island
  • roundabout entry
  • roundabout exit
  • longitudinal slope
Please wait, diff process is still running!

References

  1. Waddell, E. Evolution of Roundabout Technology—A History-Based Literature Review. In Proceedings of the Institute of Transportation Engineers 67th annual Meeting, Boston, MA, USA, 3–7 August 1997.
  2. Brilon, W. Studies on Roundabouts in Germany: Lessons Learned. In Proceedings of the 3rd International Roundabout Conference, Carmel, IN, USA, 17–20 May 2011.
  3. Beyondthemaps. Available online: https://beyondthemaps.wordpress.com/2017/08/26/roundabouts-in-europe-2017-edition/ (accessed on 16 June 2021).
  4. Smjernice za Projektiranje Kružnih Raskrižja na Državnim Cestama, Hrvatske Ceste. 2014. Available online: https://hrvatske-ceste.hr/hr/stranice/tehnicka-dokumentacija/dokumenti/45-smjernice-za-projektiranje-kruznih-raskrizja (accessed on 16 June 2021).
  5. Plangleiche Knoten–Kreisverkehre; (RVS 03.05.14); Österreichische Forschungsgesellschaft Straße-Schiene-Verkehr (FSV): Wien, Austria, 2010.
  6. Aménagement des Carrefours Interurbains sur les Routes Principales, Carrefours Plans—Guide Technique; Service d’Etudes Techniques des Routes et Autoroutes, Centre de la Sécurité et des Techniques Routières: Bagneux, France, 1998.
  7. CROW: Eenheid in Rotondes; CROW publication no.126; CROW: Ede, The Netherlands, 1998.
  8. Roundabouts—Application and Design: A Practical Manual; (Dutch) Ministry of Transport, Public Works and Water Management, Partners for Roads: Amsterdam, The Netherlands, 2009.
  9. Merkblatt für die Anlage von Kreisverkehren, K 10000; FGSV (Forschungsgesellschaft für Strassen-und Verkehrswesen): Köln, Germany, 2006.
  10. Pravilnik o Uslovima Koje sa Aspekta Bezbednosti Saobraćaja Moraju da Ispunjavaju Putni Objekti i Drugi Elementi Javnog Puta, Službeni Glasnik RS, br. 50/2011. Available online: https://www.mgsi.gov.rs/sites/default/files/Pravilnik%20o%20uslovima%20koje%20sa%20aspekta%20bezbednosti%20saobracaja%20moraju%20da%20ispunjavaju%20putni%20objekti%20i%20drugi%20elementi%20javnog%20puta.pdf (accessed on 16 June 2021).
  11. Maletin, M.; Andjus, V.; Katanić, J. Tehnička Uputstva za Projektovanje Površinskih Raskrsnica (PGS-PR/07); Građevinski Centar: Beograd, Serbia, 2010.
  12. Knoten, Knoten mit Kreisverkehr; Schweizer Norm (SN 640 263); Vereinigung Schwiezerischer Strassenfachleute (VSS): Zürich, Switzerland, 2000.
  13. Kontrolle der Befahrbarkeit; Schweizer Norm (SN 640 271a); Vereinigung Schwiezerischer Strassenfachleute (VSS): Zürich, Switzerland, 1991.
  14. Knoten, Knoten in Einer Ebene (ohne Kreisverkehr); Schweizer Norm (SN 640 262); Vereinigung Schwiezerischer Strassenfachleute (VSS): Zürich, Switzerland, 1999.
  15. Bovy, P.; de Aragao, P.; Blanc, P.H.; Veuve, L. Guide Suisse des Giratoires; Fonds de Securite Routiere, Institut des Transports et de Planification, Ecole Polytechnique Federale de Lausanne: Lausanne, Switzerland, 1991.
  16. Tolazzi, T. Alternative Types of Roundabouts; Springer: Berlin/Heidelberg, Germany, 2015.
  17. Stančerić, I.; Ahac, S.; Bezina, Š.; Vlaović, F. Design limits for intersection angles between approach legs of suburban roundabouts. Građevinar 2019, 71, 389–399.
  18. Ahmed, H.; Easa, S.M. Multi-Objective Evaluation Model of Single-Lane Roundabouts. Transp. Res. Rec. 2021.
  19. Diachuk, M.; Easa, S.M. Guidelines for roundabout circulatory and entry widths based on vehicle dynamics. J. Traffic Transp. Eng. 2018, 5, 361–371.
  20. Montella, A.; Turner, S.; Chiaradonna, S.; Aldridge, D. International overview of roundabout design practices and insights for improvement of the Italian standard. Can. J. Civ. Eng. 2013, 40, 1215–1226.
  21. Ahac, S. Design of Suburban Roundabouts Based on Rules of Vehicle Movement Geometry. Ph.D. Thesis, University of Zagreb, Zagreb, Croatia, April 2014.
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/)
Feedback