1. List

1.1. F1-F999

• F7-95(2016) Specification for Aluminum Oxide Powder
• F14-80(2019) Practice for Making and Testing Reference Glass-Metal Bead-Seal
• F15-04(2017) Specification for Iron-Nickel-Cobalt Sealing Alloy
• F16-12(2017) Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
• F17-20 Terminology Relating to Primary Barrier Packaging
• F18-12(2017) Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices
• F19-11(2016) Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
• F21-20 Test Method for Hydrophobic Surface Films by the Atomizer Test
• F22-13 Test Method for Hydrophobic Surface Films by the Water-Break Test
• F22-RU-RU-13 Стандартный метод испытания для определения гидрофобных поверхностных пленок путем испытания с образованием капель воды на поверхности
• F24-20 Test Method for Measuring and Counting Particulate Contamination on Surfaces
• F25/F25M-09(2015) Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
• F29-97(2017) Specification for Dumet Wire for Glass-to-Metal Seal Applications
• F30-96(2017) Specification for Iron-Nickel Sealing Alloys
• F31-16 Specification for Nickel-Chromium-Iron Sealing Alloys
• F34-13(2018) Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
• F36-15 Test Method for Compressibility and Recovery of Gasket Materials
• F37-06(2019) Test Methods for Sealability of Gasket Materials
• F38-18 Test Methods for Creep Relaxation of a Gasket Material
• F44-16 Specification for Metallized Surfaces on Ceramic
• F50-12(2015) Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
• F51/F51M-20 Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
• F67-13(2017) Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
• F68-16 Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
• F72-21 Specification for Gold Wire for Semiconductor Lead Bonding
• F73-96(2017) Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps
• F75-18 Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
• F76-08(2016)e1 Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
• F79-69(2019) Specification for Type 101 Sealing Glass
• F83-71(2018) Practice for Definition and Determination of Thermionic Constants of Electron Emitters
• F85-76(2018) Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes
• F86-13 Practice for Surface Preparation and Marking of Metallic Surgical Implants
• F88/F88M-15 Test Method for Seal Strength of Flexible Barrier Materials
• F88/F88M-RU-RU-15 Стандартный метод испытания прочности соединения гибкого барьерного материала
• F90-14 Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
• F91-06(2019) Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
• F96-77(2020) Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms
• F99-07(2015) Guide for Writing a Specification for Flexible Barrier Rollstock Materials
• F104-11(2020) Standard Classification System for Nonmetallic Gasket Materials
• F105-72(2019) Specification for Type 58 Borosilicate Sealing Glass
• F106-12(2017) Specification for Brazing Filler Metals for Electron Devices
• F109-12(2018) Terminology Relating to Surface Imperfections on Ceramics
• F109-12(2018) Terminology Relating to Surface Imperfections on Ceramics
• F112-00(2019) Test Method for Sealability of Enveloped Gaskets
• F116-12(2016) Specification for Medical Screwdriver Bits
• F118-13 Standard Definitions of Terms Relating to Gaskets
• F119-82(2015) Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
• F136-13 Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
• F136-RU-RU-13 Стандартные технические условия на кованый ультрамелкозернистый сплав титана-алюминия-6-ванадия 4 для применения в хирургических имплантатах (UNS R56401)
• F137-08(2018) Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
• F138-19 Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
• F139-19 Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
• F140-98(2020) Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
• F141-12(2020) Terminology Relating to Resilient Floor Coverings
• F144-80(2019) Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
• F145-72(2016) Practice for Evaluating Flat-Faced Gasketed Joint Assemblies
• F146-12(2019)e1 Test Methods for Fluid Resistance of Gasket Materials
• F147-87(2017) Test Method for Flexibility of Non-Metallic Gasket Materials
• F148-13(2019) Test Method for Binder Durability of Cork Composition Gasket Materials
• F150-06(2018) Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
• F152-95(2017) Test Methods for Tension Testing of Nonmetallic Gasket Materials
• F180-94(2020) Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
• F204-76(2018) Test Method for Surface Flaws in Tungsten Seal Rod and Wire
• F205-94(2020) Test Method for Measuring Diameter of Fine Wire by Weighing
• F218-13(2020) Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
• F219-96(2018) Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps
• F256-05(2020) Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium
• F269-60(2019) Test Method for Sag of Tungsten Wire
• F288-96(2019) Specification for Tungsten Wire for Electron Devices and Lamps
• F289-96(2019) Specification for Molybdenum Wire and Rod for Electronic Applications
• F290-94(2020) Specification for Round Wire for Winding Electron Tube Grid Laterals
• F302-09(2015) Practice for Field Sampling of Aerospace Fluids in Containers
• F303-08(2016) Practices for Sampling for Particles in Aerospace Fluids and Components
• F307-13(2020) Practice for Sampling Pressurized Gas for Gas Analysis
• F309-18 Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
• F310-07(2020) Practice for Sampling Cryogenic Aerospace Fluids
• F311-08(2020) Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
• F312-08(2016) Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
• F316-03(2019) Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
• F319-19 Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
• F320-16 Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures
• F326-17 Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
• F327-08(2015) Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
• F330-16 Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
• F331-13(2020) Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
• F336-02(2016) Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service
• F355-16e1 Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play
• F363-99(2018) Test Method for Corrosion Testing of Gaskets
• F364-96(2019) Specification for Molybdenum Flattened Wire for Electron Tubes
• F366-17 Specification for Fixation Pins and Wires
• F373-13(2017) Test Method for Embossed Depth of Resilient Floor Coverings
• F375-20 Specification for Integrated Circuit Lead Frame Material
• F377-03(2015) Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires
• F381-16 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
• F382-17 Specification and Test Method for Metallic Bone Plates
• F384-17 Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
• F386-17 Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
• F387-17 Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
• F392/F392M-11(2015) Practice for Conditioning Flexible Barrier Materials for Flex Durability
• F395-19 Terminology Relating to Vacuum Cleaners
• F400-20 Standard Consumer Safety Specification for Lighters
• F402-18 Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
• F404-20 Standard Consumer Safety Specification for High Chairs
• F406-19 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
• F408-99(2015) Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer
• F409-17 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
• F410-08(2017) Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
• F412-20a Terminology Relating to Plastic Piping Systems
• F414-15 Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger
• F420-04(2014) Test Method for Access Depth Under Furniture of Vacuum Cleaners
• F421-15 Test Method for Measuring Groove and Void Depth in Passenger Car Tires
• F428-19 Test Method for Intensity of Scratches on Aerospace Glass Enclosures
• F430-13(2018) Specification for Paper Used for Vacuum Cleaner Filter Bags
• F431-04(2013) Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners
• F432-19 Specification for Roof and Rock Bolts and Accessories
• F433-02(2020) Practice for Evaluating Thermal Conductivity of Gasket Materials
• F434-93(2017) Test Method for Blow-Out Testing of Preformed Gaskets
• F436/F436M-19 Specification for Hardened Steel Washers Inch and Metric Dimensions
• F437-15 Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
• F438-17 Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
• F439-19 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
• F441/F441M-20 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
• F442/F442M-20 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
• F444-88(2017) Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas
• F445-88(2017) Standard Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas
• F446-19 Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
• F448-18 Test Method for Measuring Steady-State Primary Photocurrent
• F449-20 Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
• F450-13(2019) Test Methods for Vacuum Cleaner Hose—Durability and Reliability (Plastic)
• F451-16 Specification for Acrylic Bone Cement
• F452-76(2014) Specification for Preformed Cranioplasty Plates
• F457-04(2017) Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
• F458-13(2018) Practice for Nondestructive Pull Testing of Wire Bonds
• F459-13(2018) Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
• F467-13(2018) Specification for Nonferrous Nuts for General Use
• F467M-06a(2018) Specification for Nonferrous Nuts for General Use (Metric)
• F468-16 Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
• F468M-06(2018) Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
• F472-11(2017) Terminology for Geometry of Alpine Skis
• F473-09(2017) Specification for Binding Mounting Area Dimensions on Alpine Skis and Bindings
• F476-14 Test Methods for Security of Swinging Door Assemblies
• F477-14 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
• F478-14a(2019) Specification for In-Service Care of Insulating Line Hose and Covers
• F479-06(2017) Specification for In-Service Care of Insulating Blankets
• F480-14 Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
• F481-97(2019) Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
• F482-09(2020) Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
• F483-09(2020) Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
• F484-08(2019) Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
• F484-RU-RU-08(2019) Стандартный метод испытания акрилового пластика на образование волосных трещин под напряжением при контакте с жидкими или полужидкими веществами
• F485-08(2019) Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
• F486-01(2018) Practice for Preparation of Use and Care Booklets for Vacuum Cleaners
• F487-13(2018) Specification for Fine Aluminum–1 % Silicon Wire for Semiconductor Lead-Bonding
• F493-20 Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
• F494-05(2016) Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
• F495-99a(2019) Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
• F496-20 Specification for In-Service Care of Insulating Gloves and Sleeves
• F498-19 Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis
• F502-08(2019) Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
• F504-05(2017) Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings
• F510/F510M-20 Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
• F511-17 Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile
• F512-19 Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
• F513-12(2018) Specification for Eye and Face Protective Equipment for Hockey Players
• F519-18 Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
• F520-16 Test Method for Environmental Resistance of Aerospace Transparencies to Artificially Induced Exposures
• F521-16 Test Methods for Bond Integrity of Transparent Laminates
• F526-16 Test Method for Using Calorimeters for Total Dose Measurements in Pulsed Linear Accelerator or Flash X-ray Machines
• F537-01(2019) Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
• F538-13 Terminology Relating to the Characteristics and Performance of Tires
• F539-01(2017) Practice for Fitting Athletic Footwear
• F541-12(2020) Specification for Alloy Steel Eyebolts
• F543-17 Specification and Test Methods for Metallic Medical Bone Screws
• F547-17 Terminology of Nails for Use with Wood and Wood-Base Materials
• F548-19 Test Method for Intensity of Scratches on Aerospace Transparent Plastics
• F551/F551M-16 Practice for Using a 1.707-m (67.23-in.) Diameter Laboratory Test Roadwheel in Testing Tires
• F552-14(2019) Terminology Relating to Chain Link Fencing
• F555-01(2016) Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
• F558-18 Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
• F559-05(2017) Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
• F560-17 Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
• F561-19 Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
• F562-13 Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
• F564-17 Specification and Test Methods for Metallic Bone Staples
• F565-04(2018) Practice for Care and Handling of Orthopedic Implants and Instruments
• F567-14a(2019) Practice for Installation of Chain-Link Fence
• F571-87(2016) Practice for Installation of Exit Devices in Security Areas
• F585-16 Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
• F588-17 Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
• F589-17 Standard Consumer Safety Specification for Non-Powder Guns
• F590-12(2018) Standard Consumer Safety Specification for Non-Powder Gun Projectiles and Propellants
• F593-17 Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
• F594-09(2020) Specification for Stainless Steel Nuts
• F601-18 Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
• F602-09(2015) Standard Criteria for Implantable Thermoset Epoxy Plastics
• F603-12(2020) Specification for High-Purity Dense Aluminum Oxide for Medical Application
• F606/F606M-19 Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
• F607-03(2019) Test Method for Adhesion of Gasket Materials to Metal Surfaces
• F608-18 Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners
• F609-05(2013) Test Method for Using a Horizontal Pull Slipmeter (HPS)
• F610/F610M-15 Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
• F615M-95(2013) Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric)
• F619-20 Practice for Extraction of Materials Used in Medical Devices
• F620-20 Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition
• F621-12(2017) Specification for Stainless Steel Forgings for Surgical Implants
• F623-19 Standard Performance Specification for Foley Catheter
• F624-09(2015)e1 Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
• F625/F625M-94(2017) Practice for Classifying Water Bodies for Spill Control Systems
• F626-14(2019) Specification for Fence Fittings
• F628-12e3 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
• F629-20 Practice for Radiography of Cast Metallic Surgical Implants
• F631-15(2020) Guide for Collecting Skimmer Performance Data in Controlled Environments
• F639-09(2015) Specification for Polyethylene Plastics for Medical Applications
• F640-20 Test Methods for Determining Radiopacity for Medical Use
• F641-09(2014) Specification for Implantable Epoxy Electronic Encapsulants
• F645-18b Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
• F647-94(2014) Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application
• F648-14 Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
• F654-07(2017) Specification for Residential Chain Link Fence Gates
• F655-13 Specification for Test Carpets and Pads for Vacuum Cleaner Testing
• F656-15 Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
• F659-10(2018) Specification for Ski and Snowboard Goggles
• F660-83(2019) Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
• F665-09(2015) Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
• F667/F667M-16 Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
• F668-17 Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
• F670-02(2017) Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing
• F679-16 Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
• F680-20 Test Methods for Nails
• F680-20 Test Methods for Nails
• F681-82(2018) Practice for Use of Branch Connections
• F682-82a(2018) Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
• F683-14 Practice for Selection and Application of Thermal Insulation for Piping and Machinery
• F688-19 Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
• F693-01(2018)e1 Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
• F696-06(2019) Specification for Leather Protectors for Rubber Insulating Gloves and Mittens
• F697-16 Practice for Care and Use of Athletic Mouth Protectors
• F700-93(2014) Practice for Care and Handling of Intracranial Aneurysm Clips and Instruments
• F702-18 Specification for Polysulfone Resin for Medical Applications
• F703-18 Specification for Implantable Breast Prostheses
• F704-81(2018)e1 Practice for Selecting Bolting Lengths for Piping System Flanged Joints
• F707/F707M-94(2019)e1 Specification for Modular Gauge Boards
• F708-92(2018)e1 Practice for Design and Installation of Rigid Pipe Hangers
• F710-19e1 Practice for Preparing Concrete Floors to Receive Resilient Flooring
• F711-17 Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools
• F712-06(2018) Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers
• F714-13(2019) Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
• F715-07(2018) Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
• F716-18 Test Methods for Sorbent Performance of Absorbents for Use on Chemical and Light Hydrocarbon Spills
• F718-07(2017) Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
• F719-20e1 Practice for Testing Materials in Rabbits for Primary Skin Irritation
• F720-17 Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test
• F721-18 Specification for Gage Piping Assemblies
• F722-18 Specification for Welded Joints for Shipboard Piping Systems
• F724-94a(2016) Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance
• F725-03(2018) Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
• F726-17 Test Method for Sorbent Performance of Adsorbents for use on Crude Oil and Related Spills
• F732-17 Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
• F733-19 Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
• F734-17 Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
• F735-17 Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
• F736-17 Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
• F739-20 Test Method for Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Continuous Contact
• F744M-16 Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits (Metric)
• F746-04(2014) Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
• F747-15 Terminology Relating to Amusement Rides and Devices
• F747-FRCA-15 Terminologie standard au sujet des jeux et manègesz
• F747-SP-15 Terminología estándar relacionada con Juegos Mecánicos y Dispositivos
• F748-16 Practice for Selecting Generic Biological Test Methods for Materials and Devices
• F749-20 Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit
• F750-20 Practice for Evaluating Acute Systemic Toxicity of Material Extracts by Systemic Injection in the Mouse
• F754-08(2015) Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders
• F755-19 Specification for Selection of Porous Polyethylene for Use in Surgical Implants
• F756-17 Practice for Assessment of Hemolytic Properties of Materials
• F758-14(2019) Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
• F760-93(2017) Specification for Food Service Equipment Manuals
• F762/F762M-08(2020)e1 Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires
• F763-04(2016) Practice for Short-Term Screening of Implant Materials
• F765-93(2017) Specification for Wildcats, Ship Anchor Chain
• F770-19 Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
• F770-FRCA-19 Norme de pratique concernant la propriété, l’exploitation, l’entretien et l’inspection des jeux et manèges
• F770-SP-19 Práctica estándar para la propiedad, el funcionamiento, el mantenimiento y la inspección de juegos y dispositivos para parques de diversiones
• F773M-16 Practice for Measuring Dose Rate Response of Linear Integrated Circuits (Metric)
• F778-88(2014) Standard Methods for Gas Flow Resistance Testing of Filtration Media
• F779-12(2018) Test Method for Torsion Characteristic of Alpine Skis
• F780-93a(2018) Test Method for Linear Deformation and Breaking Strength of Alpine Skis
• F782-19 Specification for Doors, Furniture, Marine
• F783-88(2018) Specification for Staple, Handgrab, Handle, and Stirrup Rung
• F788-20 Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
• F790-18 Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
• F791-18 Test Method for Stress Crazing of Transparent Plastics
• F792-17e1 Practice for Evaluating the Imaging Performance of Security X-Ray Systems
• F793/F793M-20 Standard Classification of Wall Coverings by Use Characteristics
• F794-03(2014) Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
• F799-19 Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
• F801-16 Test Method for Measuring Optical Angular Deviation of Transparent Parts
• F803-19 Specification for Eye Protectors for Selected Sports
• F806-99a(2017) Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
• F810-12(2018) Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
• F811-02(2016) Practice for Accelerometer Use in Vehicles for Tire Testing
• F812-12(2017) Specification for Surface Discontinuities of Nuts, Inch and Metric Series
• F813-20 Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices
• F818-16(2020) Terminology Relating to Spill Response Booms and Barriers
• F819-10(2015) Terminology Relating to Electrical Protective Equipment for Workers
• F820-18 Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
• F821/F821M-01(2018) Specification for Domestic Use Doors and Frames, Steel, Interior, Marine
• F822-93(2017) Specification for Chest of Drawers (Chiffonier), Steel, Marine
• F823-93(2017) Specification for Desk, Log, Marine, Steel, with Cabinet
• F824-93(2017) Specification for Tables, Mess, Marine, Steel
• F825-93(2017) Specification for Drawers, Furniture, Marine, Steel
• F826-94(2017) Specification for Tops, Furniture, Marine, Steel
• F832-90(2016) Standard Classification for Security Seals
• F833-19 Standard Consumer Safety Performance Specification for Carriages and Strollers
• F835-20 Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
• F836M-20 Specification for Style 1 Stainless Steel Metric Nuts (Metric)
• F837-20 Specification for Stainless Steel Socket Head Cap Screws
• F837M-20 Specification for Stainless Steel Socket Head Cap Screws (Metric)
• F838-20 Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
• F839-15 Specification for Cautionary Labeling of Portable Gasoline, Kerosene, and Diesel Containers for Consumer Use
• F841-19 Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels
• F842-17 Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
• F844-19 Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
• F851-87(2020) Test Method for Self-Rising Seat Mechanisms
• F852/F852M-20 Specification for Portable Gasoline, Kerosene, and Diesel Containers for Consumer Use
• F855-20 Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
• F856-97(2018) Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and Air Conditioning (HVAC)
• F857-17 Specification for Hot Water and Chemical Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
• F858-18 Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Single Tank, Conveyor Rack Type
• F859-15 Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type
• F860-07(2018)e1 Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
• F861-14a(2019) Specification for Commercial Dishwashing Racks
• F862-11(2017) Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
• F868-17 Standard Classification for Laminated Composite Gasket Materials
• F870-94(2016) Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
• F874-98(2019) Test Method for Temperature Measurement and Profiling for Microwave Susceptors
• F876-20b Specification for Crosslinked Polyethylene (PEX) Tubing
• F877-20 Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
• F879M-16 Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
• F879-15(2020) Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
• F880M-16 Specification for Stainless Steel Socket Set Screws (Metric)
• F880-12(2017) Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws
• F881-94(2014) Specification for Silicone Elastomer Facial Implants
• F883-13 Standard Performance Specification for Padlocks
• F884-01(2016) Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
• F885-84(2017) Specification for Envelope Dimensions for Bronze Globe Valves NPS 14 to 2
• F887-20 Specifications for Personal Climbing Equipment
• F888-06(2018) Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner
• F891-16 Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
• F894-19 Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
• F895-11(2016) Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity
• F897-19 Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
• F899-20 Specification for Wrought Stainless Steels for Surgical Instruments
• F900-11(2017) Specification for Industrial and Commercial Steel Swing Gates
• F901-20 Specification for Aluminum Transmission Tower Bolts and Nuts
• F903-18 Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
• F904-16 Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
• F905-04(2018) Practice for Qualification of Polyethylene Saddle-Fused Joints
• F906-85(2020) Specification for Letters and Numerals for Ships
• F910-04(2015) Specification for Face Guards for Youth Baseball
• F912-11(2017) Specification for Alloy Steel Socket Set Screws
• F913-02(2014) Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
• F914/F914M-20 Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments
• F917-19 Specification for Commercial Food Waste Disposers
• F918-15(2020)e1 Specification for Noncarbonated Mechanically Refrigerated Beverage Dispenser (Visible Product)
• F919-20 Specification for Slicing Machines, Food, Electric
• F921-10(2018) Terminology Relating to Hemostatic Forceps
• F922-01(2016) Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
• F924-90(2015) Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings
• F925-13(2020) Test Method for Resistance to Chemicals of Resilient Flooring
• F934-96(2017) Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
• F939-19 Practice for Selection of Release Torque Values for Alpine Ski Bindings
• F940-99(2019)e1 Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
• F941-99(2019) Practice for Inspection of Marine Surface Preparation and Coating Application
• F942-18 Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
• F945-12(2019) Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
• F946-85(2018) Guide for Establishing Security Seal Control and Accountability Procedures
• F949-20 Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
• F952-12(2017) Specification for Mixing Machines, Food, Electric
• F953-19 Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing
• F955-15 Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
• F956-91(2018) Specification for Bell, Cast, Sound Signalling
• F957-91(2018) Specification for Gong, Sound Signaling
• F95 F959/F959M-17a Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series
• F961-20 Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
• F962-04(2018) Specification for Oil Spill Response Boom Connection: Z-Connector
• F963-17 Standard Consumer Safety Specification for Toy Safety
• F963-SP-17 Especificación Estándar de Seguridad para el Consumidor para la Seguridad en los Juguetes
• F964-13(2019) Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
• F967-03(2018) Practice for Security Engineering Symbols
• F969-11(2016) Practice for Construction of Chain-Link Tennis Court Fence
• F970-17 Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading
• F977-18 Standard Consumer Safety Specification for Infant Walkers
• F980-16 Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices
• F981-04(2016) Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Insertion into Bone
• F983-86(2018) Practice for Permanent Marking of Orthopaedic Implant Components
• F985-18 Specification for Pilot Platform
• F986-86(2018)e1 Specification for Suction Strainer Boxes
• F987-04(2017) Specification for Portable Intermediate Flush Deck Stanchion
• F992-17 Specification for Valve Label Plates
• F993-17 Specification for Valve Locking Devices
• F994-86(2018) Specification for Design and Installation of Overboard Discharge Hull Penetration Connections
• F996-11(2018) Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current–Voltage Characteristics
• F997-18 Specification for Polycarbonate Resin for Medical Applications
• F998-12(2018) Specification for Centrifugal Pump, Shipboard Use

1.2. F1000-F1999

• F1000-13(2019) Practice for Piping System Drawing Symbols
• F1001-12(2017) Guide for Selection of Chemicals to Evaluate Protective Clothing Materials
• F1002-15 Standard Performance Specification for Protective Clothing and Materials for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards
• F1003-19 Specification for Searchlights on Motor Lifeboats
• F1004-19 Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
• F1005-91(2019) Practice for HVAC Duct Shapes; Identification and Description of Design Configuration
• F1006-86(2018) Specification for Entrainment Separators for Use in Marine Piping Applications
• F1007-18 Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
• F1011-07(2013) Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel
• F1014-20 Specification for Flashlights on Vessels
• F1015-03(2017) Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces
• F1016-07(2020) Practice for Linear Tire Treadwear Data Analysis
• F1018-87a(2017) Specification for Steel Emergency Gear Stowage Locker
• F1019M-00(2018) Specification for Steel Deck Gear Stowage Box [Metric
• F1020-86(2018) Specification for Line-Blind Valves for Marine Applications
• F1021-18 Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines
• F1023-12(2018) Specification for Dispensers, Powdered Iced Tea
• F1025-19 Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
• F1026-86(2014) Specification for General Workmanship and Performance Measurements of Hemostatic Forceps
• F1027-86(2017) Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices
• F1030-86(2018) Practice for Selection of Valve Operators
• F1031-13 Practice for Training the Emergency Medical Technician (Basic)
• F1035-03(2015) Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
• F1037-18 Test Method for Visual Rating of Appearance of Resilient Floors
• F1038-02(2016) Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator
• F1041-20 Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
• F1043-18 Specification for Strength and Protective Coatings on Steel Industrial Fence Framework
• F1044-05(2017)e1 Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
• F1045-16 Standard Performance Specification for Ice Hockey Helmets
• F1046-01(2015) Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing
• F1047-17 Specification for Frying and Braising Pans, Tilting Type
• F1052-20 Test Method for Pressure Testing Vapor Protective Suits
• F1055-16a Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
• F1056-18 Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
• F1057-19 Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
• F1058-16 Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)
• F1060-18 Test Method for Evaluation of Conductive and Compressive Heat Resistance (CCHR)
• F1061-08(2020) Specification for Ski Binding Test Devices
• F1062-97(2018) Test Method for Verification of Ski Binding Test Devices
• F1063-09(2018) Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems
• F1064-11(2016) Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications
• F1066-04(2018) Specification for Vinyl Composition Floor Tile
• F1068-90(2018) Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use
• F1069-19 Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use
• F1070-19 Specification for Doors, Non-Tight, for Marine Use
• F1071-94(2018) Specification for Expanded-Metal Bulkhead Panels
• F1072-94(2018) Specification for Expanded-Metal Doors
• F1073-19 Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
• F1074-87(2018) Specification for Cleats, Welded Horn Type
• F1075-97(2018) Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained
• F1076-19 Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube
• F1078-10(2018) Terminology for Surgical Scissors—Inserted and Non-Inserted Blades
• F1079-87(2014) Specification for Inserted and Noninserted Surgical Scissors
• F1080-93(2019) Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
• F1081-09(2015) Specification for Competition Wrestling Mats
• F1083-18 Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
• F1084-08(2018) Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
• F1085-19 Specification for Mattress and Box Springs for Use in Berths in Marine Vessels
• F1086-94(2016) Guide for Structures and Responsibilities of Emergency Medical Services Systems Organizations
• F1087-02(2016) Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
• F1088-18 Specification for Beta-Tricalcium Phosphate for Surgical Implantation
• F1089-18 Test Method for Corrosion of Surgical Instruments
• F1090-15 Standard Classification for Bank and Mercantile Vault Construction
• F1091-20 Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)
• F1092-19 Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems
• F1093-99(2018) Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom
• F1093-RU-RU-99(2018) Стандартные методы испытаний для определения характеристик прочности на растяжение боновых заграждений для ликвидации разливов нефти
• F1094-87(2020) Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
• F1097-17 Specification for Mortar, Refractory (High-Temperature, Air-Setting)
• F1098-87(2019) Specification for Envelope Dimensions for Butterfly Valves—NPS 2 to 24
• F1099M-18 Specification for Rat Guards, Ship's (Metric)
• F1104-02(2019) Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing
• F1105-09(2020) Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
• F1106-87(2018) Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)
• F1107-04(2015) Terminology Relating to Snowboarding
• F1108-14 Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
• F1110-09(2020) Test Method for Sandwich Corrosion Test
• F1111-08b(2019) Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
• F1112-06A(2018)e1 Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure
• F1113-87(2017) Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
• F1114-16 Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Stationary Rack Type Water-Driven Rotary Spray
• F1115-16 Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
• F1116-14a Test Method for Determining Dielectric Strength of Dielectric Footwear
• F1117-03(2019) Specification for Dielectric Footwear
• F1120-87(2019) Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
• F1121-87(2019) Specification for International Shore Connections for Marine Fire Applications
• F1122-04(2015)e1 Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
• F1123-87(2019) Specification for Non-Metallic Expansion Joints
• F1126-12(2017)e1 Specification for Food Cutters (Electric)
• F1127-07(2013) Guide for Containment of Hazardous Material Spills by Emergency Response Personnel
• F1129/F1129M-12 Guide for Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids
• F1130-99(2020) Practice for Inspecting the Coating System of a Ship
• F1134-15(2019) Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
• F1136/F1136M-11(2019) Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
• F1137/F1137M-19 Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
• F1138-98(2014) Specification for Spray Shields for Mechanical Joints
• F1139-88(2019) Specification for Steam Traps and Drains
• F114 F1140/F1140M-13(2020)e1 Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages
• F1141/F1141M-20 Specification for Wall Coverings
• F1142-19 Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight
• F1143-19 Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight
• F1144-19 Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged
• F1145-05(2017) Specification for Turnbuckles, Swaged, Welded, Forged
• F1147-05(2017)e1 Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
• F1148-20 Standard Consumer Safety Performance Specification for Home Playground Equipment
• F1149-93(2013) Practice for Qualifications, Responsibilities, and Authority of Individuals and Institutions Providing Medical Direction of Emergency Medical Services
• F1150-16 Specification for Commercial Food Waste Pulper and Waterpress Assembly
• F1154-18 Practices for Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles, Ensemble Elements, and Other Components
• F1155-10(2019) Practice for Selection and Application of Piping System Materials
• F1157-04(2015) Practice for Classifying the Relative Performance of the Physical Properties of Security Seals
• F1158-94(2015) Guide for Inspection and Evaluation of Tampering of Security Seals
• F1159-16 Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards
• F1159-SP-16 Práctica estándar para Diseño de Parques y Dispositivos de Atracciones que están Fuera del Alcance de otras Normas de Diseño F24
• F1160-14(2017)e1 Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
• F1162/F1162M-18 Specification for Pole Vault Landing Systems
• F1163-15 Specification for Protective Headgear Used in Horse Sports and Horseback Riding
• F1164-19 Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
• F1165-20 Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
• F1166-07(2013) Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
• F1169-19 Standard Consumer Safety Specification for Full-Size Baby Cribs
• F1172-88(2019) Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
• F1173-01(2018) Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
• F1178-11(2015) Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture
• F1181-19 Test Method for Measuring Binocular Disparity in Transparent Parts
• F1182-07(2019) Specification for Anodes, Sacrificial Zinc Alloy
• F1183-96(2017) Specification for Aluminum Alloy Chain Link Fence Fabric
• F1184-16 Specification for Industrial and Commercial Horizontal Slide Gates
• F1185-03(2014) Specification for Composition of Hydroxylapatite for Surgical Implants
• F1186-18 Standard Classification System for Chemicals According to Functional Groups
• F1190-18 Guide for Neutron Irradiation of Unbiased Electronic Components
• F1192-11(2018) Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices
• F1193-18a Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
• F1194-18 Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
• F1196-19 Specification for Sliding Watertight Door Assemblies
• F1197-19 Specification for Sliding Watertight Door Control Systems
• F1198-92(2018)e1 Guide for Shipboard Fire Detection Systems
• F1199-88(2019) Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150 °F Maximum)
• F1200-88(2016) Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150 °F)
• F1201-88(2021) Specification for Fluid Conditioner Fittings in Piping Applications Above 0 °F
• F1202-16 Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
• F1203-16 Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
• F1207M-12(2018) Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric
• F1209-19 Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs
• F1210-19 Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies
• F1216-16 Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
• F1217-17 Specification for Cooker, Steam
• F1218-89(2014) Specification for Bronchoscopes (Rigid)
• F1220-95(2014) Guide for Emergency Medical Services System (EMSS) Telecommunications
• F1221-89(2014) Guide for Interagency Information Exchange
• F1223-20 Test Method for Determination of Total Knee Replacement Constraint
• F1229-01(2016) Guide for Qualification and Training of EMS Air Medical Patient Care Providers
• F1231-19 Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks
• F1233-08(2019) Test Method for Security Glazing Materials And Systems
• F1235-18 Standard Consumer Safety Specification for Portable Hook-On Chairs
• F1236-19 Guide for Visual Inspection of Electrical Protective Rubber Products
• F1237-15 Specification for Commercial Dishwashing Machines, Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing
• F1244-08(2018) Specification for Berths, Marine
• F1245-19 Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
• F1247-89(2018) Specification for Intrusion Resistant Generic Vault Structures
• F1249-20 Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
• F1250-18 Specification for Stationary Upright and Recumbent Exercise Bicycles and Upper and Total Body Ergometers
• F1252-16 Test Method for Measuring Optical Reflectivity of Transparent Materials
• F1256-13 Guide for Selection and Practice of Emergency Medical Services Instructor for Emergency Medical Technician (EMT) Training Programs
• F1257-13 Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced Emergency Medical Technician
• F1258-95(2014) Practice for Emergency Medical Dispatch
• F1262M-14 Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits (Metric)
• F1263-11(2019) Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts
• F1264-16e1 Specification and Test Methods for Intramedullary Fixation Devices
• F1265-03a(2020) Test Method for Resistance to Impact for Resilient Floor Tile
• F1267-18 Specification for Metal, Expanded, Steel
• F1268-90(2020) Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems
• F1269-13(2018) Test Methods for Destructive Shear Testing of Ball Bonds
• F1270-97(2019) Practice for Preparing and Locating Emergency Muster Lists
• F1271-90(2018) Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
• F1273-91(2013) Specification for Tank Vent Flame Arresters
• F1275-14(2020) Test Method for Performance of Griddles
• F1276-99(2016) Test Method for Creep Relaxation of Laminated Composite Gasket Materials
• F1278-96(2015) Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
• F1279-19 Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces
• F1280-19 Guide for Ecological Considerations for the Use of Surface Washing Agents: Impermeable Surfaces
• F1281-17 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
• F1282-17 Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
• F1284-09(2016) Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
• F1285-13 Guide for Training the Emergency Medical Technician to Perform Patient Examination Techniques
• F1287-90(2020) Guide for Scope of Performance of First Responders Who Provide Emergency Medical Care
• F1290-19 Practice for Electrofusion Joining Polyolefin Pipe and Fittings
• F1291-16 Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
• F1292-18e1 Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment
• F1295-16 Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
• F1296-08(2015) Guide for Evaluating Chemical Protective Clothing
• F1297-90(2018) Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment
• F1298-90(2018) Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
• F1301-18 Practice for Labeling Chemical Protective Clothing
• F1303-04(2014) Specification for Sheet Vinyl Floor Covering with Backing
• F1304-18 Test Method for Deflection of Resilient Floor Tile
• F1306-16 Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
• F1307-20 Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
• F1308-98(2018) Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
• F1309-98(2018) Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations
• F1311-90(2018) Specification for Large–Diameter Fabricated Carbon Steel Flanges
• F1312-19 Specification for Brick, Insulating, High Temperature, Fire Clay
• F1314-18 Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
• F1315-17 Test Method for Density of a Sheet Gasket Material
• F1316-18 Test Method for Measuring the Transmissivity of Transparent Parts
• F1317-98(2019) Test Method for Calibration of Microwave Ovens
• F1321-14 Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel
• F1322-15 Guide for Selection of Shipboard Incinerators
• F1323-14(2020) Specification for Shipboard Incinerators
• F1325-91(2016) Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
• F1326-02(2016) Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
• F1330-91(2018) Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe
• F1331-91(2017) Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces
• F1333-91(2019) Specification for Construction of Fire and Foam Station Cabinets
• F1334-18 Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
• F1336-20 Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
• F1337-10(2015) Practice for Human Systems Integration Program Requirements for Ships and Marine Systems, Equipment, and Facilities
• F1338-91(2019) Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly
• F1339-92(2016) Guide for Organization and Operation of Emergency Medical Services Systems
• F134 F1342/F1342M-05(2013)e1 Test Method for Protective Clothing Material Resistance to Puncture
• F1344-15 Specification for Rubber Floor Tile
• F1345-10a(2019) Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
• F1346-91(2018) Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs
• F1347-91(2018) Specification for Manually Operated Fueling Hose Reels
• F1348/F1348M-91(2019) Specification for Pneumatic Rotary Descaling Machines
• F1349-08(2019) Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
• F1350-15 Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)
• F1352-08(2013) Guide for Fixed Blade Broadhead Performance and Safety Standards
• F1355-19 Guide for Irradiation of Fresh Agricultural Produce as a Phytosanitary Treatment
• F1356-16 Guide for Irradiation of Fresh, Frozen or Processed Meat and Poultry to Control Pathogens and Other Microorganisms
• F1357-14(2019) Specification for Articulating Total Wrist Implants
• F1358/F1358M-20 Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
• F1359/F1359M-16a Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Manikin
• F1360-17 Specification for Ovens, Microwave, Electric
• F1361-20 Test Method for Performance of Open Vat Fryers
• F1362-18 Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
• F1363-07(2017) Guide for Reduction of Risk of Injury for Archery Overdraws
• F1364-03(2015) Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
• F1365-91(2018) Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
• F1370-92(2019)e1 Specification for Pressure-Reducing Valves for Water Systems, Shipboard
• F1371-13(2018)e1 Specification for Vegetable Peeling Machines, Electric
• F1372-93(2020) Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
• F1373-93(2020) Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
• F1374-92(2020) Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components
• F1375-92(2020) Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
• F1376-92(2020) Guide for Metallurgical Analysis for Gas Distribution System Components
• F1377-13 Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
• F1378-18e1 Specification for Shoulder Prostheses
• F1379-95(2018) Terminology Relating to Barbed Tape
• F1383-20 Test Method for Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Intermittent Contact
• F1385-07(2018) Practice for Platforms in Cargo Tanks
• F1386-92(2016)e1 Guide for Construction of Sounding Tube and Striker Plate for Tank Sounding
• F1387-19 Specification for Performance of Piping and Tubing Mechanically Attached Fittings
• F1394-92(2020) Test Method for Determination of Particle Contribution from Gas Distribution System Valves
• F1396-93(2020) Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
• F1397-93(2020) Test Method for Determination of Moisture Contribution by Gas Distribution System Components
• F1398-93(2020) Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components
• F1407-12(2017) Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method
• F1408-20a Practice for Subcutaneous Screening Test for Implant Materials
• F1409-16 Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets
• F1410-98(2016) Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners
• F1411-11(2018) Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use
• F1412-16 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
• F1413/F1413M-18 Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems
• F1414-19 Test Method for Measurement of Cut Resistance to Chainsaw in Lower Body (Legs) Protective Clothing
• F1416-96(2019) Guide for Selection of Time-Temperature Indicators
• F1417-11A(2019)e1 Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air
• F1422-08(2020) Guide for Using the Incident Command System Framework in Managing Search and Rescue Operations
• F1426-20 Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use
• F1427-19 Standard Consumer Safety Specification for Bunk Beds
• F1428-92(2017) Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
• F1429-99(2014) Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
• F1430/F1430M-20 Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments
• F1431-92(2021) Specification for Water Trap for Diesel Exhaust
• F1435-08(2013) Specification for Designation of the Balance Point Location for Archery Arrows
• F1436-11(2017) Guide for Center Serving Diameter Dimensions for Archery Bow Strings
• F1438-93(2020) Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
• F1439-03(2018) Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials
• F1441-03(2014) Specification for Soft-Tissue Expander Devices
• F1446-20 Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
• F1447-18 Specification for Helmets Used in Recreational Bicycling or Roller Skating
• F1448-16 Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents
• F1449-20 Guide for Industrial Laundering Care and Maintenance of Flame Resistant or Arc Rated Clothing
• F1450-12a(2019) Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities
• F1453-92(2020) Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care
• F1455-92(2017) Guide for Selection of Structural Details for Ship Construction
• F1458-15 Test Method for Measurement of Cut Resistance to Chainsaw of Foot Protective Devices
• F1459-06(2017) Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
• F1460/F1460M-18 Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems
• F1461-17 Practice for Chemical Protective Clothing Program
• F1466-20 Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
• F1467-18 Guide for Use of an X-Ray Tester (≈10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
• F1468-04a(2018) Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening
• F1470-19 Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
• F1472-20a Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
• F1473-18 Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
• F1476-07(2019) Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
• F1482-15 Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring
• F1483-17 Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
• F1484-18 Test Methods for Performance of Steam Cookers
• F1487-17 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
• F1488-14(2019) Specification for Coextruded Composite Pipe
• F1492-15 Specification for Helmets Used in Skateboarding and Trick Roller Skating
• F1494-14 Terminology Relating to Protective Clothing
• F1495-20 Specification for Combination Oven Electric or Gas Fired
• F1496-13(2019) Test Method for Performance of Convection Ovens
• F1498-08(2020) Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
• F1499-17 Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
• F1500-98(2019) Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
• F1502-05(2016) Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles
• F1504-14 Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
• F1505-16 Specification for Insulated and Insulating Hand Tools
• F1506-20a Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs
• F1507-99(2017) Specification for Surge Suppressors for Shipboard Use
• F1508-96(2021) Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services
• F1510-21 Specification for Rotary Positive Displacement Pumps, Ships Use
• F1511-18 Specification for Mechanical Seals for Shipboard Pump Applications
• F1514-19 Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
• F1515-15 Test Method for Measuring Light Stability of Resilient Flooring by Color Change
• F1516-13(2018) Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)
• F1517-14 Guide for Scope of Performance of Emergency Medical Services Ambulance Operators
• F1519-98(2019) Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
• F1521-12(2018) Test Methods for Performance of Range Tops
• F1523-94(2018) Guide for Selection of Booms in Accordance With Water Body Classifications
• F1524-95(2013) Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills
• F1533-20 Specification for Deformed Polyethylene (PE) Liner
• F1534-16 Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
• F1536-95(2015)e1 Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape
• F1537-20 Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
• F1538-03(2017) Specification for Glass and Glass Ceramic Biomaterials for Implantation
• F1541-17 Specification and Test Methods for External Skeletal Fixation Devices
• F1544-11(2017) Specification for Determining the Rating Velocities of a Compound Archery Bow
• F1545-15a Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
• F1546-96(2018) Specification for Fire Hose Nozzles
• F1548-01(2018) Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
• F1550-16 Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
• F1551-09(2017) Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials
• F1552-94(2016) Practice for Training Instructor Qualification and Certification Eligibility of Emergency Medical Dispatchers
• F1553-11(2017) Guide for Specifying Chain Link Fence
• F1554-20 Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
• F1555-94(2015) Guide for Characteristics for Extremity Splints
• F1556-94(2015) Guide for Spinal Immobilization and Extrication (SPINE) Device Characteristics
• F1558-94(2015) Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID)
• F1559-94(2015) Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC)
• F1560-00(2014) Practice for Emergency Medical Dispatch Management
• F1562-14 Guide for Use-Oriented Foreign Language Instruction
• F1563-01(2019) Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
• F1564-13(2019)e1 Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers
• F1565-00(2019) Specification for Pressure-Reducing Valves for Steam Service
• F1566-14(2021) Test Methods for Evaluation of Innersprings, Boxsprings, Mattresses or Mattress Sets
• F1567-94(2019) Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
• F1568-12(2017)e1 Specification for Food Processors, Electric
• F1572-08(2015) Test Methods for Tire Performance Testing on Snow and Ice Surfaces
• F1574-03a(2017) Test Method for Compressive Strength of Gaskets at Elevated Temperatures
• F1575-17 Test Method for Determining Bending Yield Moment of Nails
• F1577-05(2019) Test Methods for Detention Locks for Swinging Doors
• F1578-07(2014) Test Method for Contact Closure Cycling of a Membrane Switch
• F1580-18 Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
• F1581-08(2020) Specification for Composition of Anorganic Bone for Surgical Implants
• F1582-98(2016) Terminology Relating to Spinal Implants
• F1583-95(2019) Practice for Communications Procedures—Phonetics
• F1586-13e1 Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
• F1587-12a(2018) Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders
• F1588-96(2019) Test Method for Constant Tensile Load Joint Test (CTLJT)
• F1591-95(2019) Practice for Visual Signals Between Persons on the Ground and in Aircraft During Ground Emergencies
• F1592-12(2019) Test Methods for Detention Hollow Metal Vision Systems
• F1593-08(2016) Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
• F1595-00(2020) Practice for Viewing Conditions for Visual Inspection of Membrane Switches
• F1596-15 Test Method for Exposure of a Membrane Switch or Printed Electronic Device to Temperature and Relative Humidity
• F1598-95(2014) Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)
• F1599-95(2018) Guide for Collecting Performance Data on Temporary Storage Devices
• F1601-01(2016) Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems
• F1602-12(2017) Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
• F1603-17 Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated
• F1604-15(2020)e1 Specification for Freezers, Ice Cream, Soft Serve, Shake
• F1605-14(2019) Test Method for Performance of Double-Sided Griddles
• F1606-19 Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
• F1607-95(2018) Guide for Reporting of Test Performance Data for Oil Spill Response Pumps
• F1608-16 Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
• F1609-08(2014) Specification for Calcium Phosphate Coatings for Implantable Materials
• F1611-20 Specification for Intramedullary Reamers
• F1613-95(2016) Specification for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb Type)
• F1615-19 Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
• F1616-95(2016) Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings
• F1624-12(2018) Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
• F1625-00(2018) Specification and Test Method for Rear-Mounted Bicycle Child Carriers
• F1632-03(2018) Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
• F1635-16 Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
• F1637-19 Practice for Safe Walking Surfaces
• F1638-95(2016)e1 Terminology for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb-Type)
• F1640-16 Guide for Selection and Use of Contact Materials for Foods to Be Irradiated
• F1642/F1642M-17 Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
• F1643-05(2019) Test Methods for Detention Sliding Door Locking Device Assembly
• F1645/F1645M-16 Test Method for Water Migration in Honeycomb Core Materials
• F1646-16 Terminology Relating to Walkway Safety and Footwear
• F1647-11(2018) Test Methods for Organic Matter Content of Athletic Field Rootzone Mixes
• F1648-95(2013) Test Methods for Archery Bowstring Component—Serving String Material
• F1649-20 Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems
• F1650-98(2014)e1 Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions
• F1653-95(2020) Guide for Scope of Performance of Triage in a Prehospital Environment
• F1654-95(2020) Guide for Training and Evaluation of Individuals Who Are Responsible for or Perform Triage in a Prehospital Environment
• F1655-95(2013) Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings
• F1657/F1657M-96(2018) Practice for Emergency Joining of Booms with Incompatible Connectors
• F1661-09(2015) Test Method for Determining the Contact Bounce Time of a Membrane Switch
• F1662-16 Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch or Printed Electronic Device
• F1663-15 Test Method for Determining the Capacitance of a Membrane Switch or Printed Electronic Device
• F1664-08(2018) Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
• F1665-08(2018) Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
• F1667-18a Specification for Driven Fasteners: Nails, Spikes, and Staples
• F1668-16 Guide for Construction Procedures for Buried Plastic Pipe
• F1669M-12(2018) Specification for Insulation Monitors for Shipboard Electrical Systems [Metric
• F1670/F1670M-17a Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
• F1671/F1671M-13 Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
• F1672-14(2019) Specification for Resurfacing Patellar Prosthesis
• F1673-10(2016) Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
• F1674-18 Test Method for Joint Restraint Products for Use with PVC Pipe
• F1675-13(2017) Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
• F1680-07a(2014) Test Method for Determining Circuit Resistance of a Membrane Switch
• F1681-14 Test Method for Determining Current Carrying Capacity of a Membrane Switch Circuit
• F1684-06(2016) Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
• F1685-00(2019) Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems
• F1686-16 Guide for Surveys to Document and Assess Oiling Conditions
• F1687-16 Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines
• F1689-05(2020) Test Method for Determining the Insulation Resistance of a Membrane Switch
• F1692-01(2016) Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems
• F1693-17 Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land
• F1694-14 Guide for Composing Walkway Surface Investigation, Evaluation and Incident Report Forms for Slips, Stumbles, Trips, and Falls
• F1695-20 Test Method for Performance of Underfired Broilers
• F1696-20 Test Method for Energy Performance of Stationary-Rack, Door-Type Commercial Dishwashing Machines
• F1697-18 Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
• F1698-02(2015)e1 Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
• F1699-96(2016) Standard Classification for Passive Fiber Optic Seals
• F1700-20 Specification for Solid Vinyl Floor Tile
• F1701-12(2018) Specification for Unused Rope with Special Electrical Properties
• F1702-10(2018) Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
• F1703-13 Guide for Skating and Ice Hockey Playing Facilities
• F1704-12(2017) Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems
• F1705-96(2020) Guide for Training Emergency Medical Services Ambulance Operations
• F1709-97(2016) Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications
• F1710-08(2016) Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
• F1711-96(2016) Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method
• F1713-08(2013) Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)
• F1714-96(2018) Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices
• F1716-96(2015) Guide for Transition and Performance of Marine Software Systems Maintenance
• F1717-18 Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
• F1718-01(2019) Specification for Rotary Positive Displacement Distillate Fuel Pumps
• F1720-17 Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
• F1722-15 Test Method for Determining Mass and Moment of Inertia of Alpine Skis
• F1728-96(2020) Practice for Multiple Persons Cold Water Survival/Rescue Technique: Huddle Position
• F1729-96(2020) Practice for Single Person Cold Water Survival/Rescue Technique: HELP Position
• F1730-96(2020) Guide for Throwing a Water Rescue Throwbag
• F1731-96(2013) Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing
• F1732-12(2018) Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
• F1733-20 Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
• F1734-19 Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
• F1735-09(2015) Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
• F1736-09(2016) Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms
• F1737/F1737M-19 Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems
• F1738-19 Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
• F1739-96(2018) Guide for Performance of a Water Rescuer—Level I
• F1740-96(2018) Guide for Inspection of Nylon, Polyester, or Nylon/Polyester Blend, or Both Kernmantle Rope
• F1741-18 Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
• F1742-03(2020) Specification for PVC Insulating Sheeting
• F1743-17 Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
• F1744-96(2016) Guide for Care and Handling of Stainless Steel Surgical Instruments
• F1749-15(2020) Specification for Fitness Equipment and Fitness Facility Safety Signage and Labels
• F1750-16(2020) Specification for Paintball Marker Threaded-Propellant Source Interface
• F1752-96(2014) Test Method for Archery Bow Component—Cord Material
• F1753-96(2014) Specification for Classification and Marking of Single-Lens Scopes for Use with Archery Bows
• F1755M-96(2018) Specification for Solid State Bargraph Meters for Shipboard Use (Metric)
• F1757-96(2015) Guide for Digital Communication Protocols for Computerized Systems
• F1758-05(2019) Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
• F1759-97(2018) Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
• F1760-16(2020) Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
• F1762-14 Test Method for Determining the Effects of Atmospheric Pressure Variation on a Membrane Switch
• F1764-97(2018) Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
• F1765-97a(2014) Guide for Ice Staff Self-Rescue Technique
• F1766-97a(2020) Guide for Ice Awls Self-Rescue Technique
• F1767-14(2020) Guide for Forms Used for Search and Rescue
• F1768-97(2020) Guide for Using Whistle Signals During Rope Rescue Operations
• F1772-17 Specification for Harnesses for Rescue and Sport Activities
• F1773-09(2015) Terminology Relating to Climbing, Mountaineering, Search and Rescue Equipment and Practices
• F1774-20 Specification for Climbing and Mountaineering Carabiners
• F1776-19 Specification for Eye Protective Devices for Paintball Sports
• F1777-19 Practice for Paintball Game Site Operation
• F1778-97(2020) Guide for Selection of Skimmers for Oil-Spill Response
• F1779-20 Practice for Reporting Visual Observations of Oil on Water from Aircraft
• F1780-18 Guide for Estimating Oil Spill Recovery System Effectiveness
• F1781-15 Specification for Elastomeric Flexible Hinge Finger Total Joint Implants
• F1783-97(2013) Guide for Performance of an Ice Rescuer—Level II
• F1784-97(2020) Test Method for Performance of a Pasta Cooker
• F1785-97(2020) Test Method for Performance of Steam Kettles
• F1786-97(2016) Test Method for Performance of Braising Pans
• F1787-98(2020) Test Method for Performance of Rotisserie Ovens
• F1788-19 Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
• F1789-17a Terminology for F16 Mechanical Fasteners
• F1790/F1790M-15 Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with CPP Test Equipment
• F1791-00(2019) Specification for Filters Used in Air or Nitrogen Systems
• F1792-97(2021) Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
• F1793-97(2021) Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air or Nitrogen Service
• F1794-97(2021) Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems
• F1795-00(2019) Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
• F1796-19 Specification for High Voltage Detectors—Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC
• F1797-18 Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks
• F1798-13 Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants
• F1799-97(2021) Guide for Shipboard Generated Waste Management Audits
• F1799-97(2021) Guide for Shipboard Generated Waste Management Audits
• F1800-19e1 Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
• F1801-20 Practice for Corrosion Fatigue Testing of Metallic Implant Materials
• F1802-15 Test Method for Performance Testing of Excess Flow Valves
• F1803-15(2019) Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
• F1804-08(2020) Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
• F1805-20 Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces
• F1806-14 Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use
• F1807-19b Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
• F1808-03(2019) Guide for Weight Control Technical Requirements for Surface Ships
• F1812-15 Test Method for Determining the Effect of an ESD Discharge on a Membrane Switch or Printed Electronic Device
• F1813-13 Specification for Wrought Titanium–12 Molybdenum–6 Zirconium–2 Iron Alloy for Surgical Implant (UNS R58120)
• F1814-15 Guide for Evaluating Modular Hip and Knee Joint Components
• F1815-11(2018) Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones
• F1816-18 Standard Safety Specification for Drawstrings on Children's Upper Outerwear
• F1816-FRCA-18 Spécification normalisée de sécurité pour les cordons de serrage des hauts de vêtements pour enfants
• F1817-17 Test Method for Performance of Conveyor Ovens
• F1818-15 Specification for Foot Protection for Chainsaw Users
• F1819-19 Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
• F1820-13 Test Method for Determining the Forces for Disassembly of Modular Acetabular Devices
• F1821-19e1 Standard Consumer Safety Specification for Toddler Beds
• F1823-97(2018) Guide for Water Rescue Personal Flotation Device (PFD)
• F1824-97(2013) Guide for Performance of a Water Rescuer–Level II
• F1825-03(2019) Specification for Clampstick Type Live Line Tools
• F1826-00(2016) Specification for Live Line and Measuring Telescoping Tools
• F1827-13(2019) Terminology Relating to Food Service Equipment
• F1828-17 Specification for Ureteral Stents
• F1829-17 Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear
• F1830-19 Practice for Collection and Preparation of Blood for Dynamic in vitro Evaluation of Hemolysis in Blood Pumps
• F1831-17 Specification for Cranial Traction Tongs and Halo External Spinal Immobilization Devices
• F1832-07(2017) Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
• F1833-97(2017) Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
• F1835-97(2018) Guide for Cable Splicing Installations
• F1836M-15(2019) Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)
• F1837M-97(2018) Specification for Heat-Shrink Cable Entry Seals (Metric)
• F1838-19 Standard Performance Requirements for Adult and Children's Plastic Chairs for Outdoor Use
• F1839-08(2016) Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
• F1840-10(2016) Terminology for Surgical Suture Needles
• F1841-19 Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps
• F1842-15 Test Method for Determining Ink or Coating Adhesion on Flexible Substrates for a Membrane Switch or Printed Electronic Device
• F1843-15 Practice for Sample Preparation of Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements
• F1844-97(2016) Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
• F1845-08(2016) Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer
• F1846-98(2020) Practice for Symbols and Markings for Use With Land Search Maps
• F1847-14 Guide for Minimum Training of Search Dog Crews or Teams
• F1848-14 Standard Classification System for Canine Search Resources
• F1849-18 Specification for Helmets Used in Short Track Speed Ice Skating (Not to Include Hockey)
• F1853-11(2018) Test Method for Measuring Sleeping Bag Packing Volume
• F1854-15 Test Method for Stereological Evaluation of Porous Coatings on Medical Implants
• F1855-00(2019) Specification for Polyoxymethylene (Acetal) for Medical Applications
• F1858-98(2020) Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use
• F1859-14e1 Specification for Rubber Sheet Floor Covering Without Backing
• F1860-14e1 Specification for Rubber Sheet Floor Covering With Backing
• F1861-16 Specification for Resilient Wall Base
• F1862/F1862M-17 Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)
• F1863-16 Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts
• F1864-16 Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
• F1866-18 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
• F1867-06(2020) Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
• F1868-17 Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
• F1869-16a Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
• F1870-16 Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
• F1871-20 Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
• F1872-17 Guide for Use of Chemical Shoreline Cleaning Agents: Environmental and Operational Considerations
• F1875-98(2014) Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface
• F1877-16 Practice for Characterization of Particles
• F1878-98(2015) Guide for Escort Vessel Evaluation and Selection
• F1879-14(2020) Guide for Demonstrating Obedience and Agility in Search and Rescue Dogs
• F1880-09(2013) Test Method for the Determination of Percent of Let-Off for Archery Bows
• F1882-15 Specification for Residential Basketball Systems
• F1883-20 Practice for Selection of Wire and Cable Size in AWG or Metric Units
• F1884-04(2018) Test Methods for Determining Residual Solvents in Packaging Materials
• F1885-18 Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogens and Other Microorganisms
• F1886/F1886M-16 Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection
• F1887-14(2019)e1 Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
• F1888-09(2016) Test Method for Compression-Displacement of Baseballs and Softballs
• F1889-05(2014) Guide for Straightness Measurement of Arrow Shafts
• F1890-17e1 Test Method for Measuring Softball and Baseball Bat Performance Factor
• F1891-19 Specification for Arc and Flame Resistant Rainwear
• F1892-12(2018) Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices
• F1893-18 Guide for Measurement of Ionizing Dose-Rate Survivability and Burnout of Semiconductor Devices
• F1895-14 Test Method for Submersion of a Membrane Switch
• F1896-16 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
• F1897-20 Specification for Leg Protection for Chain Saw Users
• F1898-15 Specification for Helmets for Non-Motorized Wheeled Vehicles Used by Infants and Toddlers
• F1899-14a(2019) Specification for Food Waste Pulper Without Waterpress Assembly
• F1900-98(2017) Test Method for Water Resistance of Footwear Using a Walking Step Simulator
• F1901-16 Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
• F1903-18 Practice for Testing for Cellular Responses to Particles in vitro
• F1904-14 Practice for Testing the Biological Responses to Particles in vivo
• F1908-08(2018) Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
• F1909-98(2020) Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets
• F1910-98(2018) Specification for Long Barbed Tape Obstacles
• F1911-05(2019) Practice for Installation of Barbed Tape
• F1912-19 Specification for Safety of Bean Bag Chairs and Bean Bag Covers
• F1913-19 Specification for Vinyl Sheet Floor Covering Without Backing
• F1914-18 Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
• F1915-05(2019) Test Methods for Glazing for Detention Facilities
• F1917-20e1 Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories
• F1918-12(2017) Standard Safety Performance Specification for Soft Contained Play Equipment
• F1919-14(2019) Specification for Griddles, Single-Sided and Double-Sided, Gas and Electric
• F1920-20 Test Method for Performance of Rack Conveyor Commercial Dishwashing Machines
• F1921/F1921M-12(2018) Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
• F1922-98(2014) Test Method for Tires, Pneumatic, Vehicular, Highway
• F1923-98(2014) Test Method for Tires, Pneumatic, Low Speed, Off Highway
• F1924-19 Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
• F1925-17 Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants
• F1926/F1926M-14 Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings
• F1927-20 Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
• F1928-98(2018) Standard Safety Guide for Consumer Recreational Use of Fun-Karts
• F1929-15 Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
• F1930-18 Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
• F1932/F1932M-98(2018) Test Method for Measuring Sleeping Bag Loft
• F1933-98(2018) Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent
• F1934-98(2018) Test Method for Weighing a Backpacking or Mountaineering Tent
• F1935-01(2018) Test Method for Measuring the Headroom of a Backpacking or Mountaineering Tent
• F1936-19 Specification for Impact Attenuation of Turf Playing Systems as Measured in the Field
• F1937-04(2017) Specification for Body Protectors Used in Horse Sports and Horseback Riding
• F1938-98(2017) Guide for Safer Use of Movable Soccer Goals
• F1939-15(2020) Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating
• F1940-07a(2019) Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
• F1941/F1941M-16 Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
• F1948-20 Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
• F1949-99(2013) Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles
• F1951-14 Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
• F1952-15 Specification for Helmets Used for Downhill Mountain Bicycle Racing
• F1953-10(2018) Guide for Construction and Maintenance of Grass Tennis Courts
• F1955-20 Test Method for Flammability of Sleeping Bags
• F1956-20 Specification for Rescue Carabiners
• F1957-99(2017) Test Method for Composite Foam Hardness-Durometer Hardness
• F1957-SP-99(2017) Método de Ensayo Estándar para Dureza de Espuma Compuesta-Dureza por Durómetro
• F1957-FRCA-99(2017) Méthode d'essai standard pour dureté de mousse composite-Test au duromètre
• F1957-JPN-99(2017) 発泡複合材およびデュローメータ硬さ試験の 標準試験方法
• F1958/F1958M-12 Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins
• F1959/F1959M-14e1 Test Method for Determining the Arc Rating of Materials for Clothing
• F1960-20 Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
• F1962-20 Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
• F1963-05(2017)e1 Specification for Deep-Fat Fryers, Gas or Electric, Open
• F1964-11(2019) Test Method for Performance of Pressure Fryers
• F1965-17 Test Method for Performance of Deck Ovens
• F1966-12(2017)e1 Specification for Dough Divider and Rounding Machines
• F1967-19 Standard Consumer Safety Specification for Infant Bath Seats
• F1970-19 Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
• F1971-12(2018) Test Method for Electrical Resistance of Tires Under Load On the Test Bench
• F1972-19 Guide for Terminology Relating to Candles and Associated Accessory Items
• F1973-13(2018) Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
• F1974-09(2020) Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
• F1975-15 Specification for Nonpowered Bicycle Trailers Designed for Human Passengers
• F1976-13 Test Method for Impact Attenuation of Athletic Shoe Cushioning Systems and Materials
• F1977-04(2017) Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
• F1978-18 Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
• F1979-17 Specification for Projectiles Used in the Sport of Paintball
• F1980-16 Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices
• F1983-14 Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications
• F1984-99(2018) Practice for Testing for Whole Complement Activation in Serum by Solid Materials
• F1985-99(2019)e1 Specification for Pneumatic-Operated, Globe-Style, Control Valves
• F1988-99(2020) Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use
• F1989-05(2020) Specification for Cooking Fire Suppression Blankets
• F1990-19 Guide for In-Situ Burning of Spilled Oil: Ignition Devices
• F1991-99(2016) Test Method for Performance of Chinese (Wok) Ranges
• F1993-16 Standard Classification System of Human Land Search and Rescue Resources
• F1994-99(2019)e1 Test Method for Shipboard Fixed Foam Firefighting Systems
• F1995-13 Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch
• F1996-14 Test Method for Silver Migration for Membrane Switch Circuitry
• F1999-14(2019) Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems

1.3. F2000-F2999

• F2000-19 Standard Safety Performance Specification for Fences for Baseball and Softball Fields
• F2001-15 Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record
• F2003-02(2015) Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
• F2004-17 Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
• F2005-05(2015) Terminology for Nickel-Titanium Shape Memory Alloys
• F2006-17 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
• F2007-18 Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
• F2008-00(2018) Guide for Qualitative Observations of Skimmer Performance
• F2009-20 Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
• F2010/F2010M-18 Test Method for Evaluation of Glove Effects on Wearer Finger Dexterity Using a Modified Pegboard Test
• F2011-02(2018) Specification for Safety and Performance of Fun-Karts
• F2012-18e1 Standard Consumer Safety Performance Specification for Stationary Activity Centers
• F2013-10(2016) Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
• F2014-00(2019) Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
• F2015-00(2019) Specification for Lap Joint Flange Pipe End Applications
• F2016-00(2018) Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings
• F2017-15 Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration
• F2019-20 Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method
• F2021-17 Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
• F2022-01(2019) Test Method for Performance of Booster Heaters
• F2023-15 Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water
• F2024-10(2016) Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
• F2025-06(2018) Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment
• F2026-17 Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
• F2027-16 Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products
• F2028-17 Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation
• F2029-16 Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength
• F2029-RU-RU-16 Стандартные практические руководства по изготовлению в лабораторных условиях запаянных соединений для определения термосвариваемости гибких барьерных материалов по прочности соединения
• F2030-11(2020) Specification for Paintball Cylinder Burst Disk Assemblies
• F2031-05(2014) Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
• F2032-15 Specification for Helmets Used for BMX Cycling
• F2033-20 Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials
• F2034-18 Specification for Sheet Linoleum Floor Covering
• F2038-18 Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I—Formulations and Uncured Materials
• F2039-00(2018) Guide for Basic Elements of Shipboard Occupational Health and Safety Program
• F2040-18 Specification for Helmets Used for Recreational Snow Sports
• F2042-18 Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication
• F2043-13(2018) Standard Classification for Bicycle Usage
• F2044-09(2019)e1 Specification for Liquid Level Indicating Equipment, Electrical
• F2045-00(2018)e1 Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic
• F2046-00(2017) Specification for Tachometers, Various
• F2047-00(2019) Practice for Workers’ Compensation Coverage of Emergency Services Volunteers
• F2048-00(2017) Practice for Reporting Slip Resistance Test Results
• F2050-19 Standard Consumer Safety Specification for Hand-Held Infant Carriers
• F2051-00(2014) Specification for Implantable Saline Filled Breast Prosthesis
• F2052-15 Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
• F2053-00(2017) Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials
• F2054/F2054M-13(2020) Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
• F2055-17 Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
• F2057-19 Standard Safety Specification for Clothing Storage Units
• F2058-07(2014) Specification for Candle Fire Safety Labeling
• F2059-17 Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Swirling Flask
• F2060-00(2018) Guide for Maintaining Cool Season Turfgrasses on Athletic Fields
• F2061-17 Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions
• F2062-00(2018) Specification for Square Drive Interconnections on Surgical Instruments
• F2063-18 Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
• F2064-17 Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications
• F2066-18 Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
• F2067-19 Practice for Development and Use of Oil-Spill Trajectory Models
• F2068-15 Specification for Femoral Prostheses—Metallic Implants
• F2070-00(2017) Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic
• F2071-00(2017) Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
• F2072-14 Test Method for Hosedown of a Membrane Switch
• F2073-14 Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch
• F2075-20 Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
• F2076-01(2014) Practice for Communicating an EMS Patient Report to Receiving Medical Facilities
• F2077-18 Test Methods For Intervertebral Body Fusion Devices
• F2078-15 Terminology Relating to Hydrogen Embrittlement Testing
• F2079-09(2017) Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents
• F2080-19 Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe
• F2081-06(2017) Guide for Characterization and Presentation of the Dimensional Attributes of Vascular Stents
• F2082/F2082M-16 Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
• F2082/F2082M-RU-RU-16 Стандартный метод испытания для определения температурного перехода никель-титановых сплавов с памятью формы посредством изгиба и свободного восстановления
• F2083-12 Specification for Knee Replacement Prosthesis
• F2084/F2084M-01(2018) Guide for Collecting Containment Boom Performance Data in Controlled Environments
• F2085-19 Standard Consumer Safety Specification for Portable Bed Rails
• F2087-13(2019) Specification for Packing, Fiberglass, Braided, Rope, and Wick
• F2088-20 Standard Consumer Safety Specification for Infant and Cradle Swings
• F2089-15 Practice for Language Interpreting
• F2090-17 Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
• F2091-15 Specification for Acetabular Prostheses
• F2092-14 Specification for Convection Oven Gas or Electric
• F2093-18 Test Method for Performance of Rack Ovens
• F209 F2094/F2094M-18a Specification for Silicon Nitride Bearing Balls
• F2095-07(2013) Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
• F2096-11(2019) Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)
• F2097-20 Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
• F2098-18 Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings
• F2099-01(2020) Guide for Use of Universal Transverse Mercator (UTM) Grids When Preparing and Using a Field Map for Land Search
• F2100-20 Specification for Performance of Materials Used in Medical Face Masks
• F2101-19 Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus
• F2102-17 Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants
• F2103-18 Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications
• F2105-18 Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
• F2106-18 Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
• F2107-08(2020) Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields
• F2108-17 Practice for Inspection of Transparent Parts by Prism
• F2109-01(2017) Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
• F2111-01a(2017) Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
• F2112-02(2019) Terminology for Membrane Switches
• F2115-19 Specification for Motorized Treadmills
• F2116-01(2015) Specification for Low Stretch and Static Kernmantle Life Safety Rope
• F2117-10(2017) Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement
• F2118-14(2020) Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials
• F2119-07(2013) Test Method for Evaluation of MR Image Artifacts from Passive Implants
• F2123-19 Practice for Treestand Instructions
• F2125-09(2013) Test Method for Treestand Static Stability and Adherence
• F2126-06(2018) Test Method for Treestand Static Load Capacity
• F2128-13 Test Method for Treestand Repetitive Loading Capability
• F2129-19a Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
• F2130-11(2018) Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials
• F2131-02(2012) Test Method for In Vitro Biological Activity of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) Using the W-20 Mouse Stromal Cell Line
• F2135-01(2017)e1 Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
• F2136-18 Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
• F2137-19 Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
• F2137-FRCA-19 Norme de pratique concernant la mesure des caractéristiques dynamiques des jeux et manèges
• F2137-SP-19 Práctica estándar para medir las características dinámicas de los juegos y los dispositivos para parques de diversiones
• F2138-12(2017) Specification for Excess Flow Valves for Natural Gas Service
• F2140-11(2019) Test Method for Performance of Hot Food Holding Cabinets
• F2141-07(2019) Test Method for Performance of Self-Serve Hot Deli Cases
• F2142-01(2019) Test Method for Performance of Drawer Warmers
• F2143-16 Test Method for Performance of Refrigerated Buffet and Preparation Tables
• F2144-17 Test Method for Performance of Large Open Vat Fryers
• F2145-13(2018) Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
• F2146-13 Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
• F2147-01(2016) Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens
• F2148-18 Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA)
• F2149-16 Test Method for Automated Analyses of Cells—the Electrical Sensing Zone Method of Enumerating and Sizing Single Cell Suspensions
• F2150-19 Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products
• F2152-07(2018) Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
• F2153-07(2018) Test Method for Measurement of Backpack Capacity
• F2154-13(2019) Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced
• F2155-01(2017) Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals
• F2156-17 Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
• F2157-09(2018) Specification for Synthetic Surfaced Running Tracks
• F2158-08(2016) Specification for Residential Central-Vacuum Tube and Fittings
• F2159-20 Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
• F2160-16 Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
• F2162-01(2016) Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
• F2163-01(2016) Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
• F2164-18 Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure
• F2165-19 Specification for Flexible Pre-Insulated Plastic Piping
• F2167-19 Standard Consumer Safety Specification for Infant Bouncer Seats
• F2168-13(2019) Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring
• F2169-15(2020) Specification for Resilient Stair Treads
• F2170-19a Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
• F2172-02(2011) Specification for Blood/Intravenous Fluid/Irrigation Fluid Warmers
• F2174-02(2019) Practice for Verifying Acoustic Emission Sensor Response
• F2175-07(2015) Specification for Portable and Permanent Emergency Escape Ladders for Residential Use
• F2176-17 Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
• F2178/F2178M-20 Specification for Arc Rated Eye or Face Protective Products
• F2179-20 Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers
• F2180-17 Specification for Metallic Implantable Strands and Cables
• F2181-20 Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
• F2182-19e2 Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging
• F2184-10(2018) Guide for Installation of Paintball Barrier Netting
• F2187-02(2019) Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
• F2188-02(2019) Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
• F219 F2191/F2191M-13(2020)e1 Specification for Packing Material, Graphitic or Carbon Braided Yarn
• F2192-05(2017) Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders
• F2193-20 Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
• F2194-16e1 Standard Consumer Safety Specification for Bassinets and Cradles
• F2195-18 Specification for Linoleum Floor Tile
• F2199-20 Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
• F2200-20 Specification for Automated Vehicular Gate Construction
• F2201-20 Standard Consumer Safety Specification for Utility Lighters
• F2202-02(2020) Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets
• F2203-13(2018) Test Method for Linear Measurement Using Precision Steel Rule
• F2204/F2204M-16 Guide for Describing Shoreline and Inland Response Techniques
• F2205-19 Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response: Tropical Environments
• F2206-19 Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)
• F2207-06(2019) Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
• F2208-08(2019) Standard Safety Specification for Residential Pool Alarms
• F2209-20 Guide for Training of Land Search Team Member
• F2211-13 Standard Classification for Tissue Engineered Medical Products (TEMPs)
• F2212-20 Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)
• F2213-17 Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
• F2214-16 Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
• F2215-15 Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
• F2216-17a Specification for Selectorized Strength Equipment
• F2217/F2217M-13(2018) Practice for Coating/Adhesive Weight Determination
• F2218-02(2015) Guide for Hardware Implementation for Computerized Systems
• F2219-14 Test Methods for Measuring High-Speed Bat Performance
• F2220-15 Specification for Headforms
• F2223-19a Guide for ASTM Standards on Playground Surfacing
• F2224-09(2020) Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants
• F2225-15(2020) Standard Safety Specification for Consumer Trampoline Enclosures
• F2227-13 Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO2 Tracer Gas Method
• F2228-13 Test Method for Non-Destructive Detection of Leaks in Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method
• F2229-20 Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
• F2230-19 Guide for In-situ Burning of Oil Spills on Water: Ice Conditions
• F2231-02(2019) Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
• F2232-14(2020) Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear
• F2233-03(2015) Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers
• F2236-16a Standard Consumer Safety Specification for Soft Infant and Toddler Carriers
• F2237-03(2020) Test Method for Performance of Upright Overfired Broilers
• F2238-20 Test Method for Performance of Rapid Cook Ovens
• F2239-10(2016) Test Method for Performance of Conveyor Broilers
• F2241-14 Specification for Continued Airworthiness System for Powered Parachute Aircraft
• F2242-05(2018) Specification for Production Acceptance Testing System for Powered Parachute Aircraft
• F2243-11(2018) Specification for Required Product Information to be Provided with Powered Parachute Aircraft
• F2244-14 Specification for Design and Performance Requirements for Powered Parachute Aircraft
• F2245-20 Specification for Design and Performance of a Light Sport Airplane
• F2246-06(2013) Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
• F2247-18 Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
• F2248-19 Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
• F2249-20e1 Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment
• F2250-13(2018) Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
• F2251-13(2018) Test Method for Thickness Measurement of Flexible Packaging Material
• F2252/F2252M-13(2018) Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
• F2255-05(2015) Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
• F2256-05(2015) Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading
• F2257-14 Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
• F2258-05(2015) Test Method for Strength Properties of Tissue Adhesives in Tension
• F2259-10(2012)e1 Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy
• F2260-18 Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy
• F2261-06(2018) Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type.
• F2263-14(2019) Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
• F2264-14(2019) Standard Consumer Safety Specification for Non-Powered Scooters
• F2266-03(2015) Specification for Masses Used in Testing Rescue Systems and Components
• F2267-04(2018) Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
• F2268-03(2015) Specification for Bicycle Serial Numbers
• F2269-11(2018) Guide for Maintaining Warm Season Turfgrasses on Athletic Fields
• F2270-12(2018) Guide for Construction and Maintenance of Warning Track Areas on Athletic Fields
• F2271-11(2019) Specification for Paintball Marker Barrel Blocking Devices
• F2272-13(2017) Specification for Paintball Markers
• F2273-11(2016) Test Methods for Bicycle Forks
• F2274-11(2016) Specification for Condition 3 Bicycle Forks
• F2275-17 Practice for Treestand Manufacturer Quality Assurance Program
• F2276-10(2015) Specification for Fitness Equipment
• F2277-17a Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
• F2278-19 Test Method for Evaluating Paintball Barrier Netting
• F2281-04(2017) Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
• F2282-18 Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
• F2283-12(2018) Specification for Shipboard Oil Pollution Abatement System
• F2285-04(2016)e1 Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use
• F2286-16 Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas
• F2291-20 Practice for Design of Amusement Rides and Devices
• F2291-FRCA-20 Norme de pratique concernant la conception des jeux et manèges
• F2291-SP-20 Práctica estándar para el diseño de juegos y dispositivos mecánicos para parques de diversiones
• F2299/F2299M-03(2017) Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
• F2300-10(2016) Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing
• F2302-20 Standard Performance Specification for Labeling Protective Clothing Which Provides Resistance to Incidental Exposures to Heat or Open Flame
• F2303-03(2015) Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits
• F2304-10(2016)e1 Practice for Sealing of Sewers Using Chemical Grouting
• F2306/F2306M-20 Specification for 12 to 60 in. (300 to 1500 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
• F2312-11(2020) Terminology Relating to Tissue Engineered Medical Products
• F2313-18 Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70% Glycolide
• F2315-18 Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels
• F2316-12(2014) Specification for Airframe Emergency Parachutes
• F231 F2317/F2317M-16a Specification for Design of Weight-Shift-Control Aircraft
• F2318-15 Specification for Rotary Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances
• F2320-18 Specification for Rubber Insulating Sheeting
• F2321-14(2020) Specification for Flexible and Rigid Insulated Temporary By-Pass Jumpers
• F2322-12(2019) Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities
• F2324-13(2019) Test Method for Prerinse Spray Valves
• F2325-14(2020) Standard Classification for Multi-Layer Steel (MLS) and Other Metal Layer Gaskets for Transportation Applications
• F2326-04(2015) Test Method for Collection and Analysis of Visible Emissions from Candles as They Burn
• F2327-15 Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water
• F2328-17 Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
• F2328M-17 Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
• F2329/F2329M-15 Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
• F2331-11(2016) Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
• F2332-06(2013) Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
• F2333-04(2017) Test Method for Traction Characteristics of the Athletic Shoe-Sports Surface Interface
• F2334-18 Guide for Above Ground Public Use Skatepark Facilities
• F2336-17 Guide for Roller Hockey Playing Facilities
• F2337-20 Test Method for Treestand Fall Arrest System
• F2338-09(2020) Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
• F2339-19a Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft
• F2340-05(2016) Specification for Developing and Validating Prediction Equation(s) or Model(s) Used in Connection with Livestock, Meat, and Poultry Evaluation Device(s) or System(s) to Determine Value
• F2341-05(2016) Practice for User Requirements for Livestock, Meat, and Poultry Evaluation Devices or Systems
• F2342/F2342M-15 Specification for Design and Construction of Composition or Quality Constituent Measuring Devices or Systems
• F2343-15 Test Method for Livestock, Meat, and Poultry Evaluation Devices
• F2345-03(2013) Test Methods for Determination of Static and Cyclic Fatigue Strength of Ceramic Modular Femoral Heads
• F2346-18 Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
• F2347-15 Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications
• F2348-04(2017) Standard Performance Specification for Privacy Padlocks
• F2352-14 Specification for Design and Performance of Light Sport Gyroplane Aircraft
• F2354-05b(2013) Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft
• F2355-14 Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft
• F2356-05a(2018) Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft
• F2359-04(2019) Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source
• F2360-08(2015)e1 Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
• F2361-18 Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
• F2362-03(2019) Specification for Temperature Monitoring Equipment
• F2363/F2363M-17 Specification for Sewage and Graywater Flow Through Treatment Systems
• F2367-04a(2018) Specification for Labeling for Upright Brooms for Consumer and Institutional Use
• F2368-04(2018) Specification for Labeling for Wet Mops for Consumer and Institutional Use
• F2369-20 Standard Safety Specification for Non-Integral Firearm Locking Devices
• F2370-16 Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
• F2371-16 Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Manikin
• F2372-15 Standard Consumer Safety Performance Specification for Shopping Carts
• F2373-11(2017) Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
• F2374-20 Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
• F2375-09(2017) Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions
• F2376-17a Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
• F237 F2376-CH-17a 标准规范水滑道系统的分类、设计、制造、施工和操作1
• F237 F2376-FRCA-17a Norme de pratique concernantla classification, la conception, la fabrication, la construction et le fonctionnement desystèmes de glissade d’eau
• F237 F2376-SP-17a Práctica estándar parala clasificación, el diseño, la fabricación, el armado y la operación de sistemas detoboganes de agua1
• F2378-05(2016) Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
• F2379-04(2016) Test Method for Energy Performance of Powered Open Warewashing Sinks
• F2380-18 Test Method for Performance of Conveyor Toasters
• F2381-19 Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
• F2382-18 Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT)
• F2384-10(2016) Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
• F2385-15(2019) Practice for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs
• F2387-04(2012) Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs
• F2388-18 Standard Consumer Safety Specification for Baby Changing Products for Domestic Use
• F2389-19 Specification for Pressure-rated Polypropylene (PP) Piping Systems
• F2390-12(2017) Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
• F2391-05(2016) Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
• F2392-04(2015) Test Method for Burst Strength of Surgical Sealants
• F2393-12(2020) Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications
• F2394-07(2017) Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System
• F2396-11(2019) Guide for Construction of High Performance Sand-Based Rootzones for Athletic Fields
• F2397-18 Specification for Protective Headgear Used in Combative Sports
• F2398-11(2020) Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
• F2400-16 Specification for Helmets Used in Pole Vaulting
• F2401-16 Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
• F2407-20 Specification for Surgical Gowns Intended for Use in Healthcare Facilities
• F2408-16 Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
• F2409-10(2016) Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas
• F2412-18a Test Methods for Foot Protection
• F2413-18 Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
• F2414-04(2016) Practice for Sealing Sewer Manholes Using Chemical Grouting
• F2415-14 Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft
• F2417-17 Specification for Fire Safety for Candles
• F2418-19 Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
• F2419-11(2017) Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
• F2421-19a Test Method for Measurement of Resilient Floor Plank by Dial Gauge
• F2423-11(2020) Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses
• F2425-05a(2018) Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft
• F2426-13(2018)e1 Guide on Wing Interface Documentation for Powered Parachute Aircraft
• F2427-05a(2018) Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft
• F2429-15 Terminology Relating to Aerospace Transparent Materials and Enclosures
• F2430-04(2018) Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)
• F2431-04(2018) Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
• F2432-12(2018) Specification for Ice Making Machines, Icemaker-Dispensers, and Ice Dispensing Equipment
• F2433-05(2018) Test Method for Determining Thermoplastic Pipe Wall Stiffness
• F2434-19 Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
• F2435-15 Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
• F2436-14(2019) Test Method for Measuring the Performance of Synthetic Rope Rescue Belay Systems Using a Drop Test
• F2437/F2437M-17 Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
• F2438-04(2017) Specification for Oil Spill Response Boom Connection: Slide Connector
• F2439-17e1 Specification for Headgear Used in Soccer
• F2440-18 Specification for Indoor Wall/Feature Padding
• F2441-12(2018) Practice for Labeling of Backpacking and Mountaineering Tents and Bivouac Sacks
• F2443-04(2012) Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End
• F2444-04(2018) Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques
• F2446-04(2018) Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange
• F2447-05(2018) Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft
• F2450-18 Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue-Engineered Medical Products
• F2453/F2453M-14(2019) Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 [3871 mm2 or Less, in Panels or Rolls, with Uniform Meshes
• F2454-05(2016)e1 Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting
• F2456-20 Specification for Youth-Resistant Firearms Containers (YRFCs)
• F2457-05(2018) Specification for Required Product Information to be Provided withWeight-Shift-Control Aircraft
• F2458-05(2015) Test Method for Wound Closure Strength of Tissue Adhesives and Sealants
• F2459-18 Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis
• F2460-19 Practice for Special Requirements for Bumper Boats
• F2461-20a Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment
• F2462-05(2015) Practice for Operation and Maintenance of Sewers with Optical Fiber Systems
• F2463-15 Terminology for Livestock, Meat, and Poultry Evaluation Systems
• F2465/F2465M-20 Guide for Oil Spill Dispersant Application Equipment: Single-point Spray Systems
• F2466-10(2018) Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications
• F2467-06(2019) Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications
• F2468-05(2019) Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
• F2469-20 Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
• F2471-19 Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
• F2472-05(2016) Test Method for Performance of Staff-Serve Hot Deli Cases
• F2473-12(2018) Test Method for Performance of Water-Bath Rethermalizers
• F2474-17 Test Method for Heat Gain to Space Performance of Commercial Kitchen Ventilation/Appliance Systems
• F2475-20 Guide for Biocompatibility Evaluation of Medical Device Packaging Materials
• F2476-20 Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO2TR) Through Barrier Materials Using an Infrared Detector
• F2477-19 Test Methods for in vitro Pulsatile Durability Testing of Vascular Stents
• F2479-17 Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
• F2480-18 Guide for In-ground Concrete Skatepark
• F2482-08(2015) Specification for Load-Indicating Externally Threaded Fasteners
• F2483-18e1 Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft
• F2487-13(2017) Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
• F2488-05(2013) Terminology for Rolling Element Bearings
• F2489-06(2013) Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases
• F2490-20 Guide for Aircraft Electrical Load and Power Source Capacity Analysis
• F2491-20 Guide for Determining Safety Factors for Technical Rescue Systems and Equipment
• F2493-20 Specification for P225/60R16 97S Radial Standard Reference Test Tire
• F2502-17 Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants
• F2503-20 Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
• F2504-05(2014) Practice for Describing System Output of Implantable Middle Ear Hearing Devices
• F2506-13 Specification for Design and Testing of Light Sport Aircraft Propellers
• F2507-15 Specification for Recreational Airpark Design
• F2508-16e1 Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
• F2509-15(2019) Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene and Polyamide-11 (PA11) Gas Distribution Pipe and Tubing
• F2510/F2510M-17 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes
• F2511-05(2013) Specification for Rollers, Bearing, Needle, Ferrous, Solid
• F2514-08(2014) Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading
• F2516-18 Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
• F2517-17 Specification for Determination of Child Resistance of Portable Fuel Containers for Consumer Use
• F2519-05(2020) Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
• F2520-20 Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets
• F2521-09(2014) Specification for Heavy-Duty Ranges, Gas and Electric
• F2522-12(2017) Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards
• F2523-13(2020) Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
• F2524-06(2020) Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications
• F2527-16 Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
• F2528-06(2014) Test Methods for Enteral Feeding Devices with a Retention Balloon
• F2529-13 Guide for in vivo Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM)
• F2530-13(2020) Specification for Protective Headgear with Faceguard Used in Bull Riding
• F2531-13 Test Method for Load Capacity of Treestand Seats
• F2532-19 Guide for Determining Net Environmental Benefit of Dispersant Use
• F2533-20 Guide for In-Situ Burning of Oil in Ships or Other Vessels
• F2534-17 Guide for Visually Estimating Oil Spill Thickness on Water
• F2536-17 Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
• F2537-06(2017) Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
• F2538-07a(2019) Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft
• F2542-05(2019) Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities
• F2544-11(2018) Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
• F2546-07(2018) Test Method for Snowboard Step-in Bindings
• F2547-18 Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment
• F2548-20 Specification for Expanded Metal Fence Systems for Security Purposes
• F2549-14a Standard Consumer Safety Specification for Frame Child Carriers
• F2550-13(2018) Practice for Locating Leaks in Sewer Pipes By Measuring the Variation of Electric Current Flow Through the Pipe Wall
• F2551-09(2016) Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
• F2553-16(2020) Specification for Warnings on Refillable CO2 Cylinders Used In the Sport of Paintball
• F2554-18 Practice for Measurement of Positional Accuracy of Computer Assisted Surgical Systems
• F2559/F2559M-06(2015) Guide for Writing a Specification for Sterilizable Peel Pouches
• F2561-20 Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
• F2562/F2562M-15(2019) Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
• F2563-16 Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation
• F2564-14 Specification for Design and Performance of a Light Sport Glider
• F2565-13 Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
• F2568-06(2018) Test Method for Measurement of Sleeping Bags
• F2569-11(2019) Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
• F2571-15 Test Methods for Evaluating Design and Performance Characteristics of Fitness Equipment
• F2573-06(2018) Specification for Low Velocity Resilient Material Projectile
• F2574-06(2018) Specification for Low Velocity Projectile Marker
• F2575-14 Guide for Quality Assurance in Translation
• F2576-15a Terminology Relating to Declarable Substances in Materials
• F2577-14 Guide for Assessment of Materials and Products for Declarable Substances
• F2579-18 Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants
• F2580-18 Practice for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prosthesis
• F2581-12(2017) Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
• F2582-20 Test Method for Dynamic Impingement Between Femoral and Acetabular Hip Components
• F2588-12(2020) Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles
• F2589-16 Specification for Ornamental Fences Employing Steel Tubular Pickets
• F2590-06(2013) Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type
• F2591-06(2013) Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)
• F2592-16 Test Method for Measuring the Force-Displacement of a Membrane Switch
• F2598-09(2017)e1 Standard Consumer Safety Specification for Clothing Storage Chests
• F2599-20 Practice for Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place Liner
• F2600-09(2018) Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
• F2601-18 Specification for Fire Safety for Candle Accessories
• F2602-18 Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
• F2603-06(2020) Guide for Interpreting Images of Polymeric Tissue Scaffolds
• F2605-16 Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
• F2606-08(2014) Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
• F2607-08(2014) Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
• F2608-15e1 Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
• F2609-11(2015) Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners
• F2611-15 Guide for Design and Construction of Chain Link Security Fencing
• F2613-19 Standard Consumer Safety Specification for Children's Chairs and Stools
• F2614-19 Specification for Condition 3 Bicycle Frames
• F2617-15 Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
• F2618-19 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
• F2619/F2619M-20 Specification for High-Density Polyethylene (PE) Line Pipe
• F2620-20 Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
• F2621/F2621M-19 Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products and Evaluating other Products in an Electric Arc Exposure
• F2622-20 Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
• F2623-19 Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
• F2624-12(2020) Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs
• F2625-10(2016) Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
• F2630-14 Guide for Self-Closing/Self-Latching General-Purpose Gates
• F2633-19 Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants
• F2634-15 Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
• F2638-18 Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
• F2639-18 Practice for Design, Alteration, and Certification of Aircraft Electrical Wiring Systems
• F2640-18 Standard Consumer Safety Specification for Booster Seats
• F2641-08(2015) Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes
• F2642-08(2015) Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes
• F2643-20 Specification for Powered Pot, Pan and Utensil Washing Sinks
• F2644-07(2019) Test Method for Performance of Commercial Patio Heaters
• F2645-16 Specification for Bun Slicing Machines
• F2646-16 Specification for Bread Slicing Machines
• F2647-07(2016) Guide for Approved Methods of Installing a CVS (Central Vacuum System)
• F2648/F2648M-20 Specification for 2 to 60 inch (50 to 1500 mm) Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
• F2649-14(2019) Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
• F2650-17e1 Terminology Relating to Impact Testing of Sports Surfaces and Equipment
• F2651-10(2015) Terminology Relating to Soil and Turfgrass Characteristics of Natural Playing Surfaces
• F2653-16(2020) Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders
• F2654-16(2020) Specification for Airsoft Gun Warnings
• F2656/F2656M-20 Test Method for Crash Testing of Vehicle Security Barriers
• F2657-07(2018) Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
• F2658-07(2019) Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
• F2659-10(2015) Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
• F2660-20 Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
• F2661-07(2015) Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
• F2662-08(2020) Guide for Minimum Training of Dispatchers and Telecommunicators of SAR Incidents
• F2663-15 Test Method for Bead Unseating of Tubeless Passenger and Light Truck Tires
• F2664-19e1 Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods
• F2665-09(2014) Specification for Total Ankle Replacement Prosthesis
• F2666-16 Specification for Aboveground Portable Pools for Residential Use
• F2668-16 Practice for Determining the Physiological Responses of the Wearer to Protective Clothing Ensembles
• F2669-12(2018) Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides
• F2670-18 Standard Consumer Safety Specification for Infant Bath Tubs
• F2675/F2675M-19 Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection
• F2676-19 Test Method for Determining the Protective Performance of an Arc Protective Blanket for Electric Arc Hazards
• F2677-08a(2019) Specification for Electrically Insulating Aprons
• F2678-16 Practice for Preparing Panel Underlayments, Thick Poured Gypsum Concrete Underlayments, Thick Poured Lightweight Cellular Concrete Underlayments, and Concrete Subfloors with Underlayment Patching Compounds to Receive Resilient Flooring
• F2679-15(2019) Specification for 6 mm Projectiles Used with Airsoft Guns
• F2680-17 Test Methods and Specifications for Bicycle Manually Operated Front Wheel Retention Systems
• F2681-18 Specification for Body Protectors Used in Equine Racing
• F2682-07(2018) Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom
• F2682-RU-RU-07(2018) Стандартное руководство по определению отношения плавучести к массе боновых заграждений для локализации разливов нефтепродуктов
• F2683-11(2017) Guide for Selection of Booms for Oil-Spill Response
• F2684/F2684M-07(2017) Test Method for Portable High Anchor Devices
• F2685-14 Guide for Training of a Land Search Team Leader (STL)
• F2686-14 Specification for Glass Fiber Reinforced Thermoplastic Pipe
• F2687-13(2019) Practice for Life Cycle Cost Analysis of Commercial Food Service Equipment
• F2694-16(2020) Practice for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses
• F2695-12(2020) Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications
• F2696-14(2019) Practice for Inspection of Aircraft Electrical Wiring Systems
• F2697-15 Test Methods for Physical Assault on Overhead Horizontal Fixed Barriers for Detention and Correctional Facilities
• F2698-08(2018) Guide for Fences for Above-Ground and In-ground Skate Park Facilities
• F2699-08(2018) Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas
• F2700-08(2020) Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Continuous Heating
• F2703-08(2013) Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction
• F2704-17a Specification for Air-Fed Protective Ensembles
• F2706-18 Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model
• F2707-10(2018)e1 Standard Safety Performance Specification for Safe Design and Installation of Field Fabricated Suction-Limiting Vent Systems for Suction Entrapment Prevention in Swimming Pools, Spas, Hot Tubs, and Wading Pools
• F2709-19 Test Method for Determining a Measured Nameplate Recovery Rate of Stationary Oil Skimmer Systems
• F2710-19 Standard Consumer Safety Performance Specification for Commercial Cribs
• F2711-19 Test Methods for Bicycle Frames
• F2713-18 Specification for Eye Protectors for Field Hockey
• F2714-08(2013) Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
• F2715-19 Specification for Temporary Protective Equipotential Bond Mat To Be Used on De-Energized Equipment
• F2716-08(2020) Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam
• F2717-14(2019) Guide for Development of an Independent Third-Party Verification of Reference Materials
• F2718-09(2015) Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines
• F2719-09(2015) Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines
• F2720/F2720M-20 Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
• F2721-09(2014) Guide for Pre-clinical in vivo Evaluation in Critical Size Segmental Bone Defects
• F2722-15 Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops
• F2723-13a Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation
• F2724-08(2014) Test Method for Evaluating Mobile Bearing Knee Dislocation
• F2725-19 Guide for European Union's Registration, Evaluation, and Authorization of Chemicals (REACH) Supply Chain Information Exchange
• F2726-08 Specification for fixation devices for tracheal tubes and other airway devices
• F2727-09(2020) Guide for Manufacturers for Labeling Headgear Products
• F2729-18 Standard Consumer Safety Specification for Constant Air Inflatable Play Devices for Home Use
• F2730/F2730M-18a Specification for Silicon Nitride Cylindrical Bearing Rollers
• F2731-18 Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems
• F2732-16 Practice for Determining the Temperature Ratings for Cold Weather Protective Clothing
• F2733-17 Specification for Flame-Resistant Rainwear for Protection Against Flame Hazards
• F2735-20 Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
• F2737-11(2017) Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
• F2739-19 Guide for Quantifying Cell Viability and Related Attributes within Biomaterial Scaffolds
• F2743-11(2018) Guide for Coating Inspection and Acute Particulate Characterization of Coated Drug-Eluting Vascular Stent Systems
• F2745-15 Specification for Required Product Information to be Provided with an Airplane
• F2746-14 Specification for Pilot's Operating Handbook (POH) for Light Sport Airplane
• F2747-19 Guide for Construction of Sand-based Rootzones for Golf Putting Greens and Tees
• F2748-19 Specification for Airsoft Guns
• F2749-15 Test Method for Determining the Effects of Creasing a Membrane Switch or Printed Electronic Device
• F2750-16 Test Method for Determining the Effects of Bending a Membrane Switch or Printed Electronic Device
• F2751-16 Guide for Training of a Land Search and Rescue Team Member
• F2752-19 Guide for Training for Basic Rope Rescuer Endorsement
• F2753-10(2015) Practice to Evaluate the Effect of Dynamic Rolling Load over Resilient Floor Covering System
• F2754/F2754M-09(2013) Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire
• F2754/F2754M-RUS-09(2013) Стандартный метод измерения изгиба, размера витка, шага спирали и определения направления намотки проволочной спирали
• F2755-14 Standard Safety Specification for Cautionary Labeling of Inflatable Air Mattresses
• F2756-11(2016) Test Method for Determining Energy Consumption of Vacuum Cleaners
• F2757-20 Guide for Home Laundering Care and Maintenance of Flame Resistant or Arc Rated Clothing
• F2759-19 Guide for Assessment of the Ultra-High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
• F2761-09(2013) Medical Devices and Medical Systems-Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE)-Part 1: General requirements and conceptual model
• F2763-16 Specification for 12 to 60 in. [300 to 1500 mm Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
• F2764/F2764M-19 Specification for 6 to 60 in. [150 to 1500 mm Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
• F2765-14 Specification for Total Lead Content in Synthetic Turf Fibers
• F2766-11(2020) Test Method for Boat Barriers
• F2767-18 Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
• F2769-18 Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
• F2771-10(2016) Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
• F2772-11(2019) Specification for Athletic Performance Properties of Indoor Sports Floor Systems
• F2773-13(2017) Practice for Transfilling Compressed Air or Nitrogen and Safe Handling of Small Paintball Cylinders
• F2774-09(2020) Practice for Manufacturing Quality Control of Consumer Trampoline Bed Material
• F2777-16 Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion
• F2778-09(2020) Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
• F2779-10(2016) Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface
• F2780-20 Guide for Design and Construction of Expanded Metal Security Fences and Barriers
• F2781-15 Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems
• F2783-20 Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada
• F2783-FRCA-20 Norme de pratique concernant la conception, la fabrication, l’exploitation, l’entretien et l’inspection des jeux et manèges, au Canada
• F2785-20 Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
• F2786-16 Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
• F2787-13(2018) Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
• F2788/F2788M-20 Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
• F2789-10(2020) Guide for Mechanical and Functional Characterization of Nucleus Devices
• F2790-10(2019)e1 Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses
• F2791-15 Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
• F2793-14 Specification for Bicycle Grips
• F2794-09(2020) Guide for Level 1 (Basic) Mounted Search and Rescue (MSAR) Responder
• F2795-18 Test Method for Performance of Self-Contained Soft Serve and Shake Freezers
• F2796-19 Specification for Hot Food Holding Tables
• F2797-19 Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners
• F2798-09(2018) Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
• F2799-14(2019) Practice for Maintenance of Aircraft Electrical Wiring Systems
• F2800-11(2017) Specification for Recirculating Hood System for Cooking Appliances
• F2801-19 Practice for Paintball Player Safety Briefing
• F2802-19 Specification for Condition 1 Bicycle Frames
• F2803-09(2015) Test Method for Evaluating Rim Slip Performance of Tires and Wheels
• F2805-16 Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
• F2806-20 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
• F2807-13(2018) Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications
• F2808-17 Test Method for Performing Behind-the-Knee (BTK) Test for Evaluating Skin Irritation Response to Products and Materials That Come Into Repeated or Extended Contact with Skin
• F2810-15 Specification for Elliptical Trainers
• F2811-15 Test Methods for Evaluating Design and Performance Characteristics of Elliptical Trainers
• F2812-12(2018) Specification for Goggle- and Spectacle-Type Eye Protectors for Selected Motor Sports
• F2813-18 Specification for Glass Used as a Horizontal Surface in Desks and Tables
• F2814-09(2015) Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes
• F2817-13(2019) Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
• F2818-10(2019) Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
• F2819-10(2015)e2 Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices
• F2820-12 Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
• F2821-15(2020) Test Methods for Basket Type Rescue Litters
• F2822-10(2016) Specification for Fixed Anchorages Installed on Structures used for Rope Rescue Training
• F2823-20 Guide for In-Situ Burning of Oil Spills in Marshes
• F2824-10(2020) Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
• F2825-18 Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery
• F2826-14(2018) Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units
• F2828-20 Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System
• F2829/F2829M-20 Specification for Metric- and Inch-Sized Fittings for Crosslinked Polyethylene (PEX) Pipe
• F2830-11(2017) Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer
• F2831-19 Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems
• F2832-11(2016) Guide for Accelerated Corrosion Testing for Mechanical Fasteners
• F2833-11(2017) Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
• F2834-10A(2017)e1 Specification for Induction Cooktops, Counter Top, Drop-in Mounted, or Floor Standing
• F2835-10(2017) Specification for Underfired Broilers
• F2836-18 Practice for Gasket Constants for Bolted Joint Design
• F2837-11(2018) Test Method for Hot Compression Properties of Gasket Materials
• F2838-17 Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
• F2839-11(2016) Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft
• F2840-14 Practice for Design and Manufacture of Electric Propulsion Units for Light Sport Aircraft
• F2842-20 Specification for Reins Used in Thoroughbred and Quarter Horse Racing
• F2843-19 Specification for Condition 0 Bicycle Frames
• F2844-20 Test Method for Displacement Compression of Softball and Baseball Bat Barrels
• F2845-14 Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs
• F2847-17 Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments
• F2848-17 Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
• F2849-10(2019) Practice for Handling of Unmanned Aircraft Systems at Divert Airfields
• F2851-10(2018) Practice for UAS Registration and Marking (Excluding Small Unmanned Aircraft Systems)
• F2852-19 Practice for Training a Land Search Tracker
• F2853-10(2015) Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
• F2854-20a Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
• F2855-19 Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
• F2856-12(2020) Practice for Transfilling and Safe Handling of Small CO2 Cylinders for Use in Paintball
• F2861-20 Test Method for Enhanced Performance of Combination Oven in Various Modes
• F2863-11(2016) Specification for Central Vacuum Hose Inlet Valve Socket Dimensions
• F2865-13 Guide for Classifying the Degrees of Ingress of Dust and Water into a Membrane Switch
• F2866-11(2019) Test Method for Flammability of a Membrane Switch in Defined Assembly
• F2867-13 Terminology Relating to Thoroughbred Horse Racing Surfaces
• F2868-19 Specification for Condition 2 Bicycle Frames
• F2869-10(2016) Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface
• F2870-19 Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
• F2871-16 Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
• F2872-19 Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire
• F2873-20 Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring
• F2874-20 Specification for One Time Use Portable Emergency Fuel Containers (PEFC) for Use by Consumers
• F2875-10(2020) Guide for Laboratory Requirements Necessary to Test Commercial Cooking and Warming Appliances to ASTM Test Methods
• F2876-10(2015) Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications
• F2877/F2877M-13(2019) Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
• F2878-19 Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture
• F2879-19 Specification for Eye Protective Devices for Airsoft Sports
• F2880-14 Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3/4 in. to 65 in.
• F2881/F2881M-19 Specification for 12 to 60 in. [300 to 1500 mm Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
• F2882/F2882M-17 Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)
• F2884-12 Guide for Pre-clinical in vivo Evaluation of Spinal Fusion
• F2885-17 Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications
• F2886-17 Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications
• F2887-17 Specification for Total Elbow Prostheses
• F2888-19 Practice for Platelet Leukocyte Count—An In-Vitro Measure for Hemocompatibility Assessment of Cardiovascular Materials
• F2889-11(2020) Practice for Assessing Language Proficiency
• F2890-17 Guide for Hazard Awareness for Search and Rescue Personnel
• F2891-15(2020)e1 Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated
• F2892-18 Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety / Non-Protective Toe)
• F2894-19 Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven
• F2895-20 Practice for Digital Radiography of Cast Metallic Implants
• F2896-11(2017) Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
• F2897-15a Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)
• F2898-11(2019) Test Method for Permeability of Synthetic Turf Sports Field Base Stone and Surface System by Non-confined Area Flood Test Method
• F2899-11(2016) Specification for Condition 1 Bicycle Forks
• F2901-19 Guide for Selecting Tests to Evaluate Potential Neurotoxicity of Medical Devices
• F2902-16e1 Guide for Assessment of Absorbable Polymeric Implants
• F2904-11(2019) Specification for Warnings on Paintball Marker Accessories Used In the Sport of Paintball
• F2905/F2905M-20a Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications
• F2906-13(2019) Standard Consumer Safety Specification for Bedside Sleepers
• F2907-19 Standard Consumer Safety Specification for Sling Carriers
• F2908-18 Specification for Unmanned Aircraft Flight Manual (UFM) for an Unmanned Aircraft System (UAS)
• F2909-19 Specification for Continued Airworthiness of Lightweight Unmanned Aircraft Systems
• F2910-14 Specification for Design and Construction of a Small Unmanned Aircraft System (sUAS)
• F2911-14e1 Practice for Production Acceptance of Small Unmanned Aircraft System (sUAS)
• F2912-17 Specification for Glazing and Glazing Systems Subject to Airblast Loadings
• F2913-19 Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester
• F2914-12(2018) Guide for Identification of Shelf-life Test Attributes for Endovascular Devices
• F2916-19 Practice for Environmental Impact Analysis of Commercial Food Service Equipment
• F2917-12(2018) Specification for Bicycle Trailer Cycles Designed for Human Passengers
• F2918-11(2015) Test Method for Weighing a Bicycle
• F2919/F2919M-12(2018) Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2 in Panels
• F2922-13(2018) Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
• F2923-20 Specification for Consumer Product Safety for Children's Jewelry
• F2924-14 Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
• F2924-RU-RU-14 Стандартные технические условия для аддитивного производства деталей из сплава Титан-6 Алюминий-4 ванадий по технологии расплавления материала в заранее сформированном слое
• F2925-11(2018) Specification for Tenderness Marketing Claims Associated with Meat Cuts Derived from Beef
• F2926-18 Guide for Selection and Operation of Vessel-mounted Camera Systems
• F2927-12 Test Method for Door Systems Subject to Airblast Loadings
• F2928-18 Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
• F2929-17 Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
• F2930-16e1 Guide for Compliance with Light Sport Aircraft Standards
• F2931-19a Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
• F2933-19 Standard Consumer Safety Specification for Crib Mattresses
• F2934-12(2018) Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications
• F2935-12(2018)e1 Specification for Chocks, Panama, Mooring Cast Steel
• F2936-12(2018)e1 Specification for Chocks, Ship Mooring, Cast Steel
• F2939-13(2019)e1 Specification for High Voltage Phasing Testers
• F2940-13(2017) Practice for Air Soft Field Operation
• F2941-13(2017) Practice for Air Soft Player Safety Briefing
• F2942-19 Guide for in vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents
• F2943-14(2019) Guide for Presentation of End User Labeling Information for Musculoskeletal Implants
• F2944-20 Practice for Automated Colony Forming Unit (CFU) Assays—Image Acquisition and Analysis Method for Enumerating and Characterizing Cells and Colonies in Culture
• F2945-18 Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
• F2946-12(2017) Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes
• F2947/F2947M-20 Specification for 150 to 1500 mm [6 to 60 in. Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
• F2947/F2947M-SP-20 Especificación de estándar para tuberías de polietileno (PE) de pared de perfil corrugado annular de 150 a 1500 mm [de 6 a 60 in. y accessorios para applicaciones de alcantarillas sanitarias
• F2948-20 Guide to Walkway Auditor Qualifications
• F2949-18 Specification for Pole Vault Box Collars
• F2950-14(2021) Standard Safety and Performance Specification for Soccer Goals
• F2951-19 Standard Consumer Safety Specification for Baby Monitors
• F2952-14 Guide for Determining the Mean Darcy Permeability Coefficient for a Porous Tissue Scaffold
• F2953-12 Specification for Phenolic Raw Materials for the Use in Bearing Cages
• F2954-19 Guide for Training for Intermediate Rope Rescuer Endorsement
• F2955-19 Guide for Training for Advanced Rope Rescuer Endorsement
• F2956-16 Test Methods for Anchor Systems Used for Detention Hollow Metal Systems
• F2957-13(2019)e1 Specification for Ornamental Aluminum Fence Systems
• F2958-14(2019) Guide for Helicopter Inland Search and Rescue (SAR) Technician
• F2959-19 Practice for Aerial Adventure Courses
• F2959-FRCA-19 Norme de pratique concernant Les parcours d’aventure aériens
• F2959-SP-19 Práctica estándar para Circuitos de aventuras aéreas
• F2960-16 Practice for Permanent Amusement Railway Ride Tracks and Related Devices
• F2961-15 Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
• F2964-12(2020) Test Method for Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device
• F2965-13 Guide for Selection of Walkway Surfaces and Treatments When Considering Aggressive Contaminant Conditions in Commercial and Industrial (Not Including Construction) Environments
• F2966-19 Guide for Snow and Ice Control for Walkway Surfaces
• F2968/F2968M-20a Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications
• F2969-12(2020) Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe
• F2970-20 Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
• F2971-13 Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing
• F2972-15 Specification for Light Sport Aircraft Manufacturer's Quality Assurance System
• F2973-16 Specification for Insulating Lifting Links for Load Lifting Equipment Working Near Energized Power Lines
• F2974-20 Practice for Auditing Amusement Rides and Devices
• F2974-SP-20 Práctica estándar para la auditoría de juegos y dispositivos para parques de diversiones
• F2974-FRCA-20 Norme de pratique concernant la vérification des jeux et manèges
• F2975-12(2017) Test Method for Measuring the Field Performance of Commercial Kitchen Ventilation Systems
• F2976-13(2019) Practice for Determining the Field Performance of Commercial Kitchen Demand Control Ventilation Systems
• F2977-20 Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants
• F2978-20 Standards Guide to Optimize Scan Sequences for Clinical Diagnostic Evaluation of Metal-on-Metal Hip Arthroplasty Devices using Magnetic Resonance Imaging
• F2979-14 Guide for Characterization of Wear from the Articulating Surfaces in Retrieved Metal-on-Metal and other Hard-on-Hard Hip Prostheses
• F2980-13(2017) Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)
• F2981-15(2020) Test Method for Verifying Nonporous Flexible Barrier Material Resistance to the Passage of Air
• F2982-18 Specification for Polyester Composition Floor Tile
• F2983-13(2018) Guide for Manufacturers for Labeling and Care Instructions for Wrestling Mats
• F2984-13(2019) Specification for Segmental Panel System for the Grout-in-Place-Liner (GIPL) Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts, and Conduits
• F2985-14(2019) Practice for Installation of a PVC Segmental Panel Liner System in Man-Entry Size Sewers and Conduits
• F2986-12(2017) Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications
• F2987-12(2018) Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications
• F2988-18 Specification for Commercial Coffee Brewers
• F2989-13 Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications
• F2990-12(2018) Test Method for Commercial Coffee Brewers
• F2991-13 Guide for Doubler Plate Repairs for Non-Classed Ship Structures
• F2992/F2992M-15 Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with Tomodynamometer (TDM-100) Test Equipment
• F2994-18 Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems
• F2995-16 Guide for Shipping Possibly Infectious Materials, Tissues, and Fluids
• F2996-20 Practice for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems
• F2997-13 Practice for Quantification of Calcium Deposits in Osteogenic Culture of Progenitor Cells Using Fluorescent Image Analysis
• F2998-14 Guide for Using Fluorescence Microscopy to Quantify the Spread Area of Fixed Cells
• F2999-19 Standard Consumer Safety Specification for Adult Jewelry

1.4. F3000-F3999

• F3000/F3000M-13(2018) Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats
• F3001-14 Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion
• F3002-14a Specification for Design of the Command and Control System for Small Unmanned Aircraft Systems (sUAS)
• F3003-14 Specification for Quality Assurance of a Small Unmanned Aircraft System (sUAS)
• F3004-13(2020) Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound
• F3005-14a Specification for Batteries for Use in Small Unmanned Aircraft Systems (sUAS)
• F3006-20 Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing
• F3007-19 Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass
• F3008-13(2020) Specification for Cork Floor Tile
• F3009-14(2018) Specification for Polyolefin Composition Floor Tile
• F3010-18 Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings
• F3011-13 Specification for Performance of Angle of Attack System
• F3012-14 Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment
• F3013-13(2018) Test Method for Density of Topsoil and Blended Soils In-place by the Core Displacement Method
• F3014-14 Test Method for Penetration Testing of Needles Used in Surgical Sutures
• F3015-13 Test Method for Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through Load Range E
• F3016/F3016M-19 Test Method for Surrogate Testing of Vehicle Impact Protective Devices at Low Speeds
• F3018-17 Guide for Assessment of Hard-on-Hard Articulation Total Hip Replacement and Hip Resurfacing Arthroplasty Devices
• F3019/F3019M-19 Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners
• F3020-20 Standard Performance Specifications and Test Methods for Hand-Worn Metal Detectors Used in Safety and Security
• F3021-17 Specification for Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
• F3022-16e1 Test Method for Evaluating the Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
• F3023-18 Test Methods for Evaluating Design and Performance Characteristics of Stationary Upright and Recumbent Exercise Bicycles and Upper and Total Body Ergometers
• F3024-13 Guide for Training of a Land Search and Rescue (SAR) Strike Team/Task Force Leader
• F3026-14(2019) Guide for Helicopter Inland Search and Rescue (SAR) Crew Chief
• F3027-18 Guide for Training of Personnel Operating in Mountainous Terrain (Mountain Endorsement)
• F3028-18 Guide for Training of Search and Rescue Personnel Operating in the Alpine Environment (Alpine Endorsement)
• F3030-13(2019) Test Method for Snowboards with a Channel-Mounting System and Removable Inserts
• F3031-17 Practice for Range of Motion Evaluation of First Responder's Protective Ensembles
• F3033-16 Practice for Installation of a Single-Sized, Cured-In-Place Liner Utilizing an Inflatable Bladder for Resurfacing Manhole Walls of Various Shapes and Sizes
• F3034-15(2020) Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
• F3035-13 Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft
• F3036-13 Guide for Testing Absorbable Stents
• F3038-14 Test Method for Timed Evaluation of Forced-Entry-Resistant Systems
• F3039-15 Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
• F3040/F3040M-13(2018) Test Method for Mechanical Static Load Testing of Non-Structural Marine Joiner Bulkheads
• F3041-14(2019) Specification for Bonded Rubber Crumb Floor Coverings
• F3042-13(2018) Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws
• F3043-15 Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
• F3044-20 Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants
• F3045-20 Test Method for Evaluation of the Type and Viscoelastic Stability of Water-in-oil Mixtures Formed from Crude Oil and Petroleum Products Mixed with Water
• F3046-13 Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)
• F3047M-15 Guide for High Demand Hip Simulator Wear Testing of Hard-on-hard Articulations
• F3048-13e1 Guide for Swiftwater/Flood Search and Rescue Operations
• F3049-14 Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes
• F3050-17 Guide for Conformity Assessment of Personal Protective Clothing and Equipment
• F3051-14(2019) Test Method for Performance of Cook-and-Hold Ovens
• F3052-14(2020)e1 Guide for Conducting Small Boat Stability Test (Deadweight Survey and Air Inclining Experiment) to Determine Lightcraft Weight and Centers of Gravity of a Small Craft
• F3054-18 Practice for Operations of Amusement Railway Rides, Devices, and Facilities
• F3055-14a Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
• F305 F3055-RU-RU-14a Стандартные технические условия на никелевый сплав (UNS N07718) для аддитивного производства с плавлением в порошковом слое
• F3056-14e1 Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
• F3056-RU-RU-14e1 Стандартные технические условия на никелевый сплав (UNS N06625) для аддитивного производства с плавлением в порошковом слое
• F3057-16 Test Method for Electromagnetic Shielding Effectiveness of Glazings
• F3058-16 Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines
• F3059-18 Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding
• F3060-20 Terminology for Aircraft
• F3061/F3061M-20 Specification for Systems and Equipment in Small Aircraft
• F3062/F3062M-20 Specification for Aircraft Powerplant Installation
• F3063/F3063M-20 Specification for Aircraft Fuel Storage and Delivery
• F3064/F3064M-20a Specification for Aircraft Powerplant Control, Operation, and Indication
• F3065/F3065M-19 Specification for Aircraft Propeller System Installation
• F3066/F3066M-18 Specification for Aircraft Powerplant Installation Hazard Mitigation
• F3067-14 Guide for Radial Loading of Balloon Expandable and Self Expanding Vascular Stents
• F3068-14 Guide for Contents and Use of a Position Task Book (PTB)
• F3069-14 Guide for Requirements for Bodies that Operate Certification Programs in the Field of Search and Rescue
• F3070-14 Guide for Evaluating Area Search Dog Crews or Teams
• F3071-14(2020) Guide for Basic Wilderness GPS/GNSS Use (GPS/GNSS-IW) Endorsement
• F3072-14(2020) Guide for Intermediate Wilderness GPS/GNSS Use (GPS/GNSS-IIW) Endorsement
• F3077-17 Specification for Eye Protectors for Women's Lacrosse
• F3078-15 Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)
• F3079-14(2020) Practice for Use of Distributed Optical Fiber Sensing Systems for Monitoring the Impact of Ground Movements During Tunnel and Utility Construction on Existing Underground Utilities
• F3080-17a Practice for Laser Technologies for Measurement of Cross-Sectional Shape of Pipeline and Conduit by Non-Rotating Laser Projector and CCTV Camera System
• F3082/F3082M-17 Specification for Weights and Centers of Gravity of Aircraft
• F308 F3083/F3083M-20a Specification for Emergency Conditions, Occupant Safety and Accommodations
• F3084-20 Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers
• F3085-14(2018) Specification for Air Soft Gun Barrel Blocking Devices
• F3087-15 Specification for Acrylic Molding Resins for Medical Implant Applications
• F3088-14 Test Method for Use of a Centrifugation Method to Quantify/Study Cell-Material Adhesive Interactions
• F3089-14 Guide for Characterization and Standardization of Polymerizable Collagen-Based Products and Associated Collagen-Cell Interactions
• F3090-20 Test Method for Fatigue Testing of Acetabular Devices for Total Hip Replacement
• F3091/F3091M-14 Specification for Powder Bed Fusion of Plastic Materials
• F3092-14(2019) Terminology Relating to Optical Fiber Sensing Systems
• F3093/F3093M-20 Specification for Aeroelasticity Requirements
• F3094-14 Test Method for Determining Protection Provided by X-ray Shielding Garments Used in Medical X-ray Fluoroscopy from Sources of Scattered X-Rays
• F3095-17a Practice for Laser Technologies for Direct Measurement of Cross Sectional Shape of Pipeline and Conduit by Rotating Laser Diodes and CCTV Camera System
• F3096-14 Standard Performance Specification for Tipover Restraint(s) Used with Clothing Storage Unit(s)
• F3097-15 Practice for Installation of an Outside Sewer Service Cleanout through a Minimally Invasive Small Bore Vacuum Excavation
• F3098-16 Guide for Training of Non-Wilderness Land Search Team Member
• F3099-19 Practices for Parasailing
• F3100-15(2019) Practice for Low Impact Paintball Field Operation
• F3101-15 Specification for Unsupervised Public Use Outdoor Fitness Equipment
• F3102-15 Guide for Specifying, Measuring, and Managing Impact Attenuation of Synthetic Turf Playing Systems
• F3103-14(2019) Specification for Testing Off-Road Motorcycle and ATV Helmets
• F3104-14 Test Methods for Evaluating Design and Performance Characteristics of Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment
• F3105-14 Specification for Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment
• F3106-14 Guide for in vitro Osteoblast Differentiation Assays
• F3107-14 Test Method for Measuring Accuracy after Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems
• F3108-19 Guide for Clinical Outcomes for Clinical Trials and/or Clinical Registries for Knee Reconstructive Surgery
• F3109-16 Test Method for Verification of Multi-Axis Force Measuring Platforms
• F3110-14(2018) Practice for Proper Use of Mechanical Trenchless Point Repair Sleeve with Locking Gear Mechanism for Pipes of Varying Inner Diameter and Offset Joints
• F3111-16 Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
• F3114-19 Specification for Structures
• F3115/F3115M-20 Specification for Structural Durability for Small Aeroplanes
• F3116/F3116M-18e2 Specification for Design Loads and Conditions
• F3117/F3117M-20 Specification for Crew Interface in Aircraft
• F3118-17a Standard Consumer Safety Specification for Infant Inclined Sleep Products
• F3120/F3120M-20 Specification for Ice Protection for General Aviation Aircraft
• F3121/F3121M-17e1 Guide for In-Service Inspection, Maintenance, and Electrical Testing of Hand-Held Live-Line Insulating Tools (Fiberglass-Reinforced Plastic (FRP))
• F3122-14 Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes
• F3123-18a Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
• F3124-15e1 Practice for Data Recording the Procedure used to Produce Heat Butt Fusion Joints in Plastic Piping Systems or Fittings
• F3125/F3125M-19e2 Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
• F3127-16 Guide for Validating Cleaning Processes Used During the Manufacture of Medical Devices
• F3128-19 Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core
• F3129-16 Guide for Characterization of Material Loss from Conical Taper Junctions in Total Joint Prostheses
• F3130-18 Practice for Language Service Companies
• F3131-14 Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages
• F3132-20 Practice for Selection of Walkway Surfaces When Considering Pedestrian Safety
• F3133-19 Practice for Classification, Design, Manufacture, Construction, Maintenance, and Operation of Stationary Wave Systems
• F3136-15 Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method
• F3137-15 Specification for Headgear Used in Women's Lacrosse (excluding Goalkeepers)
• F3139-15 Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry
• F3140-17 Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements
• F3141-17a Guide for Total Knee Replacement Loading Profiles
• F3142-16 Guide for Evaluation of in vitro Release of Biomolecules from Biomaterials Scaffolds for TEMPs
• F3143-20 Test Method for Determination of Frictional Torque and Friction Factor for Hip Replacement Bearings under Standard Conditions Using a Reciprocal Friction Simulator
• F3144-15 Guide for Evaluating Trailing Search Dog Crews or Teams
• F3145-15 Guide for Swiftwater/Flood Rescue Technician Basic
• F3146-18 Test Method for Impact Attenuation of Turf Playing Systems Designated for Rugby
• F3147-15 Test Method for Evaluating the Reliability of Surface Mounted Device (SMD) Joints on a Flexible Circuit by a Rolling Mandrel Bend
• F3148-17a Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
• F3149-15 Practice for Determining the Maintenance Factor (m) and Yield Factor (y) Loading Constants Applicable to Gasket Materials and Designs
• F3150-18 Specification for HEPA Filtration System Performance of Residential and Commercial Vacuum Cleaners
• F3151-17 Specification for Driven Steel Post Drive Anchor System
• F3152-16 Test Method for Determining Abrasion Resistance of Inks and Coatings on Substrates Using Dry or Wet Abrasive Medium
• F3153-15 Specification for Verification of Avionics Systems
• F3158-20 Practice for Patron Transportation Conveyors Used with a Water Related Amusement Ride or Device
• F3159-15e1 Standard Safety Specification for Liquid Laundry Packets
• F3160-16 Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants
• F3161-16 Test Method for Finite Element Analysis (FEA) of Metallic Orthopaedic Total Knee Femoral Components under Closing Conditions
• F3163-16 Guide for Classification of Cellular and/or Tissue-Based Products (CTPs) for Skin Wounds
• F3164-19 Specification for Eye Protectors for Racket Sports (Racquetball, Squash, Tennis)
• F3165-16 Specification for Throat Protective Equipment for Hockey Goaltenders
• F3166-16 Specification for High-Purity Titanium Sputtering Target Used for Through-Silicon Vias (TSV) Metallization
• F3168-20 Practice for Hayride Attractions
• F3169-16 Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method by Laser Measurement
• F3172-15 Guide for Design Verification Device Size and Sample Size Selection for Endovascular Devices
• F3173/F3173M-18 Specification for Aircraft Handling Characteristics
• F3174/F3174M-19 Specification for Establishing Operating Limitations and Information for Aeroplanes
• F3175-16 Guide for Training and Equipping Search and Rescue Personnel Operating on Mountain Bikes (Mountain Bike SAR Endorsement)
• F3176-20 Specification for Special Needs Shopping Carts
• F3178-16 Practice for Operational Risk Assessment of Small Unmanned Aircraft Systems (sUAS)
• F3179/F3179M-20 Specification for Performance of Aircraft
• F3180/F3180M-19 Specification for Low-Speed Flight Characteristics of Aircraft
• F3181-16 Test Method for The Un-notched, Constant Ligament Stress Crack Test (UCLS) for HDPE Materials Containing Post- Consumer Recycled HDPE
• F3182-16 Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines for Potable Water
• F3183-16 Practice for Guided Side Bend Evaluation of Polyethylene Pipe Butt Fusion Joint
• F3184-16 Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
• F3186-17 Specification for Adult Portable Bed Rails and Related Products
• F3187-16 Guide for Directed Energy Deposition of Metals
• F3188-16 Specification for Extractable Hazardous Metals in Synthetic Turf Infill Materials
• F3189-20 Test Method for Measuring Force Reduction, Vertical Deformation, and Energy Restitution of Synthetic Turf Systems Using the Advanced Artificial Athlete
• F3190-16 Practice for Heat Fusion Equipment (HFE) Operator Qualification on Polyethylene (PE) and Polyamide (PA) Pipe and Fittings
• F3191-16 Practice for Field Determination of Substrate Water Absorption (Porosity) for Substrates to Receive Resilient Flooring
• F3192-16 Specification for High-Purity Copper Sputtering Target Used for Through-Silicon Vias (TSV) Mettalization
• F3193-16 Guide for Training of a Land Search and Rescue Team Leader
• F3194-16 Guide for Training for Personnel Operating Small Land Off Road Vehicles (ATV-ROHV Ops Endorsement)
• F3195-16 Guide for Estimating the Volume of Oil Consumed in an In-Situ Burn
• F3196-18 Practice for Seeking Approval for Beyond Visual Line of Sight (BVLOS) Small Unmanned Aircraft System (sUAS) Operations
• F3198-18 Specification for Light Sport Aircraft Manufacturer's Continued Operational Safety (COS) Program
• F3199-16a Guide for Wing Interface Documentation for Weight Shift Control Aircraft
• F3200-20a Terminology for Driverless Automatic Guided Industrial Vehicles
• F3201-16 Practice for Ensuring Dependability of Software Used in Unmanned Aircraft Systems (UAS)
• F3202-19a Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping
• F3203-19 Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing
• F3204-16 Guide for Design and Construction of Welded Wire Fence Systems for Security Purposes
• F3205-17 Practice for Independent Audit Program for Light Aircraft Manufacturers
• F3206-17 Guide for Assessing Medical Device Cytocompatibility with Delivered Cellular Therapies
• F3207-17 Guide for in vivo Evaluation of Rabbit Lumbar Intertransverse Process Spinal Fusion Model
• F3208-20 Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices
• F3209-16 Guide for Autologous Platelet-Rich Plasma for Use in Tissue Engineering and Cell Therapy
• F3211-17 Guide for Fatigue-to-Fracture (FtF) Methodology for Cardiovascular Medical Devices
• F3212-16 Test Method for Coring Testing of Huber Needles
• F3213-17 Standard for Additive Manufacturing – Finished Part Properties – Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
• F3214-18 Practice for Characterization of Fire Properties of Materials Specified for Vehicles Associated with Amusement Rides and Devices
• F3215-16 Specification for Food Waste Dehydrators
• F3216-16 Test Method for Performance of Retherm Ovens
• F3217-17 Guide for Security Fasteners
• F3218-19 Practice for Documenting Environmental Conditions for Utilization with A-UGV Test Methods
• F3219-19 Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
• F3220-17 Practice for Prioritizing Sewer Pipe Cleaning Operations by Using Transmissive Acoustic Inspection
• F3221-16 Guide for Training for Snowmobile Operator's Endorsement
• F3222-16 Terminology Relating to F32 Land Search and Rescue Standards and Guides
• F3223-17 Guide for Characterization and Assessment of Tissue Engineered Medical Products (TEMPs) for Knee Meniscus Surgical Repair and/or Reconstruction
• F3224-17 Test Method for Evaluating Growth of Engineered Cartilage Tissue using Magnetic Resonance Imaging
• F3225-17 Guide for Characterization and Assessment of Vascular Graft Tissue Engineered Medical Products (TEMPs)
• F3226/F3226M-19 Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
• F3227/F3227M-20 Specification for Environmental Systems in Aircraft
• F3228-17 Specification for Flight Data and Voice Recording in Small Aircraft
• F3229/F3229M-17 Practice for Static Pressure System Tests in Small Aircraft
• F3230-20a Practice for Safety Assessment of Systems and Equipment in Small Aircraft
• F3231/F3231M-19 Specification for Electrical Systems for Aircraft with Combustion Engine Electrical Power Generation
• F3232/F3232M-20 Specification for Flight Controls in Small Aircraft
• F3233/F3233M-17 Specification for Instrumentation in Small Aircraft
• F3234/F3234M-17 Specification for Exterior Lighting in Small Aircraft
• F3235-17a Specification for Aircraft Storage Batteries
• F3236-17 Specification for High Intensity Radiated Field (HIRF) Protection in Small Aircraft
• F3237-18 Terminology Relating to Snow Sport Freestyle Terrain Park Jumps
• F3238-17 Specification for Design and Installation of an Infrared (IR) Searchlight System (USA)
• F3239-19 Specification for Aircraft Electric Propulsion Systems
• F3240-19e1 Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG) for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main and Lateral Pipelines
• F3244-17 Test Method for Navigation: Defined Area
• F3245-19 Guide for Aircraft Electronics Technician Personnel Certification
• F3246-18 Specification for Quality Assurance for Manufacturers of Aircraft Systems
• F3248-17 Test Method for Determining Vertical Deformation and Area Deflection of Area Elastic, Point Elastic, Combined Elastic and Mixed Elastic Sport and Dance Surfaces
• F3249-20 Specification for Treestands, Climbing Sticks, and Tripod or Tower Stands
• F3251-17 Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Baffled Flask
• F3253-19 Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems
• F3254-19 Specification for Aircraft Interaction of Systems and Structures
• F3255-19 Specification for Rapid Pull Down Refrigerators (Blast Chillers), Freezers (Blast Freezers), Combination Refrigerator/Freezer (Blast Chiller/Freezers), and Quick Chillers for Commercial Use
• F3256-17 Guide for Reporting and Recording of Near-Misses for Maritime Industry
• F3257-17 Guide for Design, Construction, and Operation of Vessels Providing Accommodation Service to Offshore Installations
• F3259-17 Guide for Micro-computed Tomography of Tissue Engineered Scaffolds
• F3260-18 Test Method for Determining the Flexural Stiffness of Medical Textiles
• F3261-20 Specification for Resilient Flooring in Modular Format with Rigid Polymeric Core
• F3262-17 Standard Classification System for Small Unmanned Aircraft Systems (sUASs) for Land Search and Rescue
• F3263-17 Guide for Packaging Test Method Validation
• F3264-19 Specification for Normal Category Aeroplanes Certification
• F3265-17 Test Method for Grid-Video Obstacle Measurement
• F3266-18 Guide for Training for Remote Pilot in Command of Unmanned Aircraft Systems (UAS) Endorsement
• F3268-18a Guide for in vitro Degradation Testing of Absorbable Metals
• F3269-17 Practice for Methods to Safely Bound Flight Behavior of Unmanned Aircraft Systems Containing Complex Functions
• F3270/F3270M-17 Practice for Compression versus Load Properties of Gasket Materials
• F3272-18 Guide for Selection, Care, and Use of Arc Protective Blankets
• F3273-17 Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700)
• F3275-19 Guide for Using a Force Tester to Evaluate Performance of a Brush Part Designed to Clean the Internal Channel of a Medical Device
• F3276-19 Guide for Using a Force Tester to Evaluate the Performance of a Brush Part Designed to Clean the External Surface of a Medical Device
• F3277-19 Specification for Cantilevered Steel Bunks Used in Detention and Correctional Facilities
• F3278-20 Standard Performance Specifications and Test Methods for Hand-Held Metal Detectors Used in Safety and Security
• F3283/F3283M-18 Specification for the Manufacturing of High-Voltage Proximity Alarm to be used for the Detection of Overhead High Voltage Alternating Current (AC)
• F3284-18 Guide for Recording and Reporting of Injuries and Illnesses for the Maritime Industry
• F3285-18 Guide for Installation and Application of Type C Portable Tanks for Marine LNG Service
• F3286-17 Guide for Cybersecurity and Cyberattack Mitigation
• F3287-17e1 Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
• F3288/F3288M-20 Specification for MRS-Rated Metric- and Inch-sized Crosslinked Polyethylene (PEX) Pressure Pipe
• F3290-17 Guide for Handling and Application of a Membrane Switch or Printed Electronic Device to its Final Support Structure
• F3291-17 Test Method for Measuring the Force-Resistance of a Membrane Force Sensor
• F3292-19 Practice for Inspection of Spinal Implants Undergoing Testing
• F3293-18 Guide for Application of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices
• F3294-18 Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy
• F3295-18 Guide for Impingement Testing of Total Disc Prostheses
• F3296-19 Practice for Commercial Application of Electric Security Fences
• F3297-19 Practice for Corrections Application for Non-Lethal Electric Security Fences
• F3298-19 Specification for Design, Construction, and Verification of Lightweight Unmanned Aircraft Systems (UAS)
• F3299-18 Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P2O5 Sensor)
• F3300-18 Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
• F3301-18a Standard for Additive Manufacturing – Post Processing Methods – Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion
• F3302-18 Standard for Additive Manufacturing – Finished Part Properties – Specification for Titanium Alloys via Powder Bed Fusion
• F3306-19 Test Method for Ion Release Evaluation of Medical Implants
• F3308/F3308M-19 Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene (PE) Pipe for Non-Pressure Applications
• F3309/F3309M-20 Practice for Simplified Safety Assessment of Systems and Equipment in Small Aircraft
• F3310-18 Specification for Non-Essential Ice Detectors for Aircraft
• F3311-19 Practice for Mat Bond Evaluation of Performance and Compatibility for Resilient Flooring System Components Prior to Installation
• F3312/F3312M-18 Practice for Liquefied Natural Gas (LNG) Bunkering Hose Transfer Assembly
• F3313-20 Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field
• F3314-20 Terminology Relating to Technology and Underground Infrastructure
• F3315-18 Guide for Training of Abandoned or Inactive Mine Search and Rescue Team Member
• F3316/F3316M-19 Specification for Electrical Systems for Aircraft with Electric or Hybrid-Electric Propulsion
• F3317-20 Standard Consumer Safety Specification for Infant Floor Seats
• F3318-18 Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam
• F3319-20 Specification for Selection and Application of Field-Installed Cryogenic Pipe and Equipment Insulation Systems on Liquefied Natural Gas (LNG)-Fueled Ships
• F3320-18 Guide for Coating Characterization of Drug Coated Balloons
• F3321-19 Guide for Methods of Extraction of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices
• F3322-18 Specification for Small Unmanned Aircraft System (sUAS) Parachutes
• F3323-20 Terminology for Exoskeletons and Exosuits
• F3324-19 Test Method for Measurement of Cut Resistance to Chainsaw in Leg-Protective Devices
• F3325-20 Specification for Leg-Protective Devices for Chainsaw Users
• F3326-19a Specification for Flame Mitigation Devices on Portable Fuel Containers
• F3327-18 Practice for Recording the A-UGV Test Configuration
• F3328-18 Practice for the One-Step (Solvent Cement Only) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
• F3329-18 Specification for Carbon and Alloy Steel Metric Rivets
• F3330-18 Specification for Training and the Development of Training Manuals for the UAS Operator
• F3331-18 Practice for Aircraft Water Loads
• F3333-20 Specification for Chopped Carbon Fiber Reinforced (CFR) Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
• F3334-19 Practice for Finite Element Analysis (FEA) of Metallic Orthopaedic Total Knee Tibial Components
• F3335-20 Guide for Assessing the Removal of Additive Manufacturing Residues in Medical Devices Fabricated by Powder Bed Fusion
• F3337-19 Guide for Taking Property and Behavior Measurements on Weathered Fractions of Oil
• F3338-20 Specification for Design of Electric Propulsion Units for General Aviation Aircraft
• F3339-20 Guide for Construction or Renovation of Native-soil Athletic Fields
• F3340-18 Test Method for Thermal Resistance of Camping Mattresses Using a Guarded Hot Plate Apparatus
• F3341/F3341M-20a Terminology for Unmanned Aircraft Systems
• F3342-19 Guide for Temporary Fence Applications for Construction Sites
• F3343-20 Standard Consumer Safety Specification for Infant Bathers
• F3344-19 Guide for Storage, Use, and Handling of Liquid Rocket Propellants
• F3346-19 Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PERT/AL/PE-RT) Composite Pressure Pipe
• F3347-20a Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
• F3348-20b Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
• F3349-18 Guide for Use of Herding Agents in Conjunction with In-Situ Burning
• F3350-18 Guide for Collecting Skimmer Performance Data in Ice Conditions
• F3351-19e1 Test Method for Playground Surface Impact Testing in Laboratory at Specified Test Height
• F3352-19 Specification for Isolation Gowns Intended for Use in Healthcare Facilities
• F3353-19 Guide for Shipboard Use of Lithium-Ion (Li-ion) Batteries
• F3354-19 Guide for Evaluating Extracellular Matrix Decellularization Processes
• F3356-19a Practice for Conformity Assessment of Metal Detectors Used in Safety and Security
• F3357-19 Guide for Designing Reusable Medical Devices for Cleanability
• F3358-20 Practice for Labeling and Information for Exoskeletons
• F3359-19 Test Method for Determining Bending Yield Moment of Staples
• F3361-18e1 Guide for Classifying Alterations for In-Service Aircraft under FAA Authority Oversight
• F3362-18 Guide for Onboard Communication & Safety Systems Personnel Certification
• F3363-19 Specification for Unvented Liquid/Gel Fuel-Burning Portable Devices
• F3364-19 Practice for Independent Audit Program for Unmanned Aircraft Operators
• F3365-19 Practice for Compliance Audits to ASTM Standards on Unmanned Aircraft Systems
• F3366-19 Specification for General Maintenance Manual (GMM) for a small Unmanned Aircraft System (sUAS)
• F3367-20 Practice for Simplified Methods for Addressing High-Intensity Radiated Fields (HIRF) and Indirect Effects of Lightning on Aircraft
• F3368-19 Guide for Cell Potency Assays for Cell Therapy and Tissue Engineered Products
• F3369-19e1 Guide for Assessing the Skeletal Myoblast Phenotype
• F3371-19 Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications
• F3372-20 Practice for Butt Fusion Joining of PA12 Pipe and Fittings
• F3373-20 Specification for Polyethylene (PE) Electrofusion Fittings for Outside Diameter Controlled Crosslinked Polyethylene (PEX) Pipe
• F3374-19 Guide for Active Fixation Durability of Endovascular Prostheses
• F3375-19 Test Method for Assessing Non-Metered Restricted Delivery Systems for Liquid Consumer Products
• F3376-19 Guide for Core Competencies for Aviation Maintenance Personnel
• F3377-20 Terminology Relating to Commercial Spaceflight
• F3379-20 Guide for Training for Public Safety Remote Pilot of Unmanned Aircraft Systems (UAS) Endorsement
• F3380-19 Practice for Structural Compliance of Very Light Aeroplanes
• F3381-19 Practice for Describing Stationary Obstacles Utilized within A-UGV Test Methods
• F3383-19a Test Method for Filament Bind of Single Fibers in Synthetic Turf
• F3386/F3386M-20 Specification for Detonation Flame Arresters
• F3387-19 Practice for Respiratory Protection
• F3389/F3389M-20 Test Method for Assessing the Safety of Small Unmanned Aircraft Impacts
• F3390-20 Specification for 3 through 24 in. Lined Flexible Corrugated Polyethylene Pipe for Land Drainage Applications
• F3392-20 Practice for Exoskeleton Wearing, Care, and Maintenance Instructions
• F3393-20e1 Zinc-Flake Coating Systems for Fasteners
• F3394/F3394M-20 Specification for Hardened Steel Backup and Reaction Washers Inch and Metric Dimensions
• F3395/F3395M-19 Specification for Neurosurgical Head Holder Devices
• F3396/F3396M-20 Practice for Aircraft Simplified Loads Criteria
• F3400-19 Test Method for In-situ Testing of Functional Properties of Equine Surfaces: Artificial Surfaces
• F3401-19 Test Method for Wax Binder Removal from Equestrian Synthetic Track Surfaces
• F3407-20 Test Method for Respirator Fit Capability for Negative-Pressure Half-Facepiece Particulate Respirators
• F3408/F3408M-20 Specification for Aircraft Emergency Parachute Recovery Systems
• F3409-19 Practice for Simplified Aircraft Loads Determination
• F3410-19 Test Method for Testing Fiber Rope Used in Water Sports
• F3411-19 Specification for Remote ID and Tracking
• F3412-20 Terminology Relating to Treestands
• F3413-19 Guide for Additive Manufacturing — Design — Directed Energy Deposition
• F3414-20 Test Method for Determining Ortho-Phthalate Concentration in Flooring Containing Polyvinyl Chloride
• F3415-20 Test Method for Triaxial Shear Strength and Cohesion of Equine Sports Surfaces
• F3417-20 Test Method for Gas Chromatography Analysis of Petroleum Waxes Used in Equestrian Synthetic Surfaces
• F3418-20 Test Method for Measurement of Transition Temperatures of Slack Waxes used in Equine Sports Surfaces by Differential Scanning Calorimetry (DSC)
• F3425-20 Guide for Aircraft Electronics Installation Technician Certification
• F3426-20 Test Method for Measuring the Thermal Insulation of Clothing Items Using Heated Manikin Body Forms
• F3427-20 Practice for Documenting Environmental Conditions for Utilization with Exoskeleton Test Methods
• F3429/F3429M-20 Specification for Performance of Flame Mitigation Devices Installed in Disposable and Pre-Filled Flammable Liquid Containers
• F3430-20 Specification for Closed-Cell Cellular Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
• F3431-20 Specification for Determining Flammability of Materials for Recreational Camping Tents and Warning Labels for Associated Hazards
• F3432-20a Practice for Powerplant Instruments
• F3434-20 Guide for Additive manufacturing – Installation/Operation and Performance Qualification (IQ/OQ/PQ) of Laser-Beam Powder Bed Fusion Equipment for Production Manufacturing
• F3442/F3442M-20 Specification for Detect and Avoid System Performance Requirements
• F3443-20 Practice for Load Handling When Using an Exoskeleton
• F3444/F3444M-20 Practice for Training Exoskeleton Users
• F3446-20 Test Method for Determination of Frictional Torque and Friction Factor for Hip Implants Using an Anatomical Motion Hip Simulator
• F3448-20 Guide for Clinical Outcomes for Clinical Trials and/or Clinical Registries for Hip Reconstructive Surgery
• F3449-20 Guide for Inclusion of Cyber Risks into Maritime Safety Management Systems in Accordance with IMO Resolution MSC.428(98)―Cyber Risks and Challenges
• F3450-20 Guide for Flight Hazard and Surveillance Systems Personnel Certification
• F3457-20 Guide for Aircraft Certification Education Standards for Engineers and Professionals in Aerospace Industry
• F3463-20 Guide for Ensuring the Safety of Connected Consumer Products
• F3470-20 Guide for A-UGV Capabilities
• F3474-20 Practice for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics
• F3478-20 Practice for Development of a Durability and Reliability Flight Demonstration Program for Low-Risk Unmanned Aircraft Systems (UAS) under FAA Oversight
• F3479-20 Specification for Failure Tolerance for Occupant Safety of Suborbital Vehicles
• F3487-20 Guide for Assessing the Service Life of a Brush Part Intended to Clean a Medical Device
• F3496-20 Specification for Polyaromatic Hydrocarbon (PAH) Content in Synthetic Turf Infil

1.5. Withdrawn Standard

• F568M Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners. Withdrawn January 2012 due to ISO 898-1.^[1]

The content is sourced from: https://handwiki.org/wiki/Engineering:List_of_ASTM_International_standards_(F)