1. History

The history of the transistor dates to the 1920s when several inventors attempted devices that were intended to control current in solid-state diodes and convert them into triodes. Success came after World War II, when the use of silicon and germanium crystals as radar detectors led to improvements in fabrication and theory. Scientists who had worked on radar returned to solid-state device development. With the invention of transistors at Bell Labs in 1947, the field of electronics shifted from vacuum tubes to solid-state device.

With the small transistor at their hands, electrical engineers of the 1950s saw the possibilities of constructing far more advanced circuits. However, as the complexity of circuits grew, problems arose.^[1]

One problem was the size of the circuit. A complex circuit like a computer was dependent on speed. If the components were large, the wires interconnecting them must be long. The electric signals took time to go through the circuit, thus slowing the computer.^[1]

The invention of the integrated circuit by Jack Kilby and Robert Noyce solved this problem by making all the components and the chip out of the same block (monolith) of semiconductor material. The circuits could be made smaller, and the manufacturing process could be automated. This led to the idea of integrating all components on a single-crystal silicon wafer, which led to small-scale integration (SSI) in the early 1960s, medium-scale integration (MSI) in the late 1960s, and then large-scale integration (LSI) as well as VLSI in the 1970s and 1980s, with tens of thousands of transistors on a single chip (later hundreds of thousands, then millions, and now billions (10⁹)).

2. Developments

The first semiconductor chips held two transistors each. Subsequent advances added more transistors, and as a consequence, more individual functions or systems were integrated over time. The first integrated circuits held only a few devices, perhaps as many as ten diodes, transistors, resistors and capacitors, making it possible to fabricate one or more logic gates on a single device. Now known retrospectively as small-scale integration (SSI), improvements in technique led to devices with hundreds of logic gates, known as medium-scale integration (MSI). Further improvements led to large-scale integration (LSI), i.e. systems with at least a thousand logic gates. Current technology has moved far past this mark and today's microprocessors have many millions of gates and billions of individual transistors.

At one time, there was an effort to name and calibrate various levels of large-scale integration above VLSI. Terms like ultra-large-scale integration (ULSI) were used. But the huge number of gates and transistors available on common devices has rendered such fine distinctions moot. Terms suggesting greater than VLSI levels of integration are no longer in widespread use.

In 2008, billion-transistor processors became commercially available. This became more commonplace as semiconductor fabrication advanced from the then-current generation of 65 nm processes. Current designs, unlike the earliest devices, use extensive design automation and automated logic synthesis to lay out the transistors, enabling higher levels of complexity in the resulting logic functionality. Certain high-performance logic blocks like the SRAM (static random-access memory) cell, are still designed by hand to ensure the highest efficiency.

3. Structured Design

Structured VLSI design is a modular methodology originated by Carver Mead and Lynn Conway for saving microchip area by minimizing the interconnect fabrics area. This is obtained by repetitive arrangement of rectangular macro blocks which can be interconnected using wiring by abutment. An example is partitioning the layout of an adder into a row of equal bit slices cells. In complex designs this structuring may be achieved by hierarchical nesting.^[2]

Structured VLSI design had been popular in the early 1980s, but lost its popularity later because of the advent of placement and routing tools wasting a lot of area by routing, which is tolerated because of the progress of Moore's Law. When introducing the hardware description language KARL in the mid' 1970s, Reiner Hartenstein coined the term "structured VLSI design" (originally as "structured LSI design"), echoing Edsger Dijkstra's structured programming approach by procedure nesting to avoid chaotic spaghetti-structured program

4. Difficulties

As microprocessors become more complex due to technology scaling, microprocessor designers have encountered several challenges which force them to think beyond the design plane, and look ahead to post-silicon:

• Process variation – As photolithography techniques get closer to the fundamental laws of optics, achieving high accuracy in doping concentrations and etched wires is becoming more difficult and prone to errors due to variation. Designers now must simulate across multiple fabrication process corners before a chip is certified ready for production, or use system-level techniques for dealing with effects of variation.^[3]
• Stricter design rules – Due to lithography and etch issues with scaling, design rules for layout have become increasingly stringent. Designers must keep in mind an ever increasing list of rules when laying out custom circuits. The overhead for custom design is now reaching a tipping point, with many design houses opting to switch to electronic design automation (EDA) tools to automate their design process.
• Timing/design closure – As clock frequencies tend to scale up, designers are finding it more difficult to distribute and maintain low clock skew between these high frequency clocks across the entire chip. This has led to a rising interest in multicore and multiprocessor architectures, since an overall speedup can be obtained even with lower clock frequency by using the computational power of all the cores.
• First-pass success – As die sizes shrink (due to scaling), and wafer sizes go up (due to lower manufacturing costs), the number of dies per wafer increases, and the complexity of making suitable photomasks goes up rapidly. A mask set for a modern technology can cost several million dollars. This non-recurring expense deters the old iterative philosophy involving several "spin-cycles" to find errors in silicon, and encourages first-pass silicon success. Several design philosophies have been developed to aid this new design flow, including design for manufacturing (DFM), design for test (DFT), and Design for X.

The content is sourced from: https://handwiki.org/wiki/Engineering:Very-large-scale_integration