Perfluoroalkyl and polyfluoroalkyl substances (PFASs) consist of a group of environmentally persistent, toxic and bio-accumulative organic compounds of industrial origin that are widely present in water and wastewater. Despite restricted use due to current regulations on their use, perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) remain the most commonly detected long-chain PFAS.
1. Introduction
Perfluoroalkyl and polyfluoroalkyl substances (PFASs) (C5–C18) are widely used in different industrial applications (clothing, paper packing, non-stick cookware, food packaging, pesticide formulations, waterproof fabrics, fume suppressants, photographic films, masking tape, firefighting foams) due to their unique properties
[1][2]. These special properties of PFASs are associated with characteristics such as: (1) the hydrogen atoms on the alkyl chain are replaced by fluorine atoms
[3], and (2) the presence of both long hydrophobic perfluorinated (C
nH
2n+1) carbon chain and hydrophilic functional group (-S
O3−, -COO
−), i.e., in PFOS and PFOA
[4]. PFAS have been found in both influent and effluent of wastewater treatment plants which are considered as one of the major sources for their occurrence in surface and groundwater
[5][6][7]. Like several other micropollutants, PFAS are found at very low concentrations
[8], but their refractory nature and unique physicochemical properties (
Table 1) exacerbates the challenge of their degradation and/or removal.
Table 1. Physicochemical properties of various PFASs (adapted from Espana et al.
[9]).
Property |
PFOA (Free Acid) |
PFOS (Potassium Salt) |
* Physical description |
White powder/waxy white solid |
White powder PFOA |
Molecular formula |
C8HF15O2 |
C8HF17O3S |
Molecular weight (g mol−1) |
414 |
538 |
Water solubility at 25 °C (mg L−1) |
9.5 × 103 |
680 |
Melting Point (°C) |
45–50 |
>400 |
Boiling point (°C) |
189–192 |
Not measurable |
Vapour pressure at 25 °C (Pa) |
4.2 |
2.48 × 10–8 |
Organic–carbon partition coefficient (log Koc) |
2.06 |
** 2.57 |
Henry’s law constant (atm-m3 mol−1) |
Not measurable |
3.05 × 10–9 |
Half-Life |
*** 90 days, **** >92 years (at 25 °C) |
*** 114 days, **** >41 years (at 25 °C) |
This entry is adapted from the peer-reviewed paper 10.3390/w13223185