Prostate cancer is an androgen-driven tumor. Different prostate cancer therapies consequently focus on blocking the androgen receptor pathway. Clinical studies reported tumor resistance mechanisms by reactivating and bypassing the androgen pathway. Preclinical models allowed the identification, confirmation, and thorough study of these pathways.
The androgen receptor (AR) is the main driver of proliferation in prostate cancer (PCa) cells, and thus is an important therapeutic target [1][2]. It consists of three structural components: the C terminal domain/ligand binding domain, the DNA binding domain, and the N terminal domain [3]. Ligand binding, dimerization, and complex formation with coregulators contribute to the downstream AR signaling [4] (Figure 1). At the cellular level, prostate epithelial cells depend on survival- and growth-inducing signals from the AR. Thus, AR inhibition deprives PCa cells of these signals and leads to G1 arrest [5].

Figure 1. Overview of intracellular androgen action. Androgen receptor (AR), heat shock proteins (hsp), dihydrotestosterone (DHT), 5-alpha reductase (5α-R), androgen response element (ARE).
Clinical targeting of the AR is achieved by LHRH agonists/antagonists and abiraterone or by blocking the AR ligand binding pocket with anti-androgens (e.g., apalutamide, darolutamide, and enzalutamide). Unfortunately, curative treatment of advanced PCa by these AR signaling inhibitors is prevented by the occurrence of resistance mechanisms [1][2].
To become resistant against these therapies, PCa cells have to overcome the lack of growth signals. The mechanisms can be broadly categorized into two groups: (1) mechanisms that reactivate AR signaling output (i.e., AR overexpression, mutation and splice variants, glucocorticoid receptor takeover, androgen synthesis); and (2) mechanisms that bypass the AR by providing growth signals via other means (i.e., alterations in cell cycle regulators, DNA repair pathways, PI3K/PTEN alterations, trans-differentiation into AR independent phenotypes such as neuroendocrine cells).
Different cell types are used as preclinical PCa models, each with their distinct features. The most commonly used PCa cell lines and their characteristics are shown in Table 1.
Table 1. Overview commonly used prostate cancer cell lines. Wild type (WT); androgen receptor (AR). Adapted from [6][7][8].
| Cell Line | AR/PSA | Hormone Resistant/Sensitive | Direct/Xenograft (Indirect) | Specific Characteristics |
|---|---|---|---|---|
| Lymph node metastasis | ||||
| LNCaP | + | Sensitive | Direct | T877A AR mutant, PTEN -, androgen dependent |
| LAPC-4 | + | Sensitive | Xenograft | P53 mutant, WT PTEN |
| Bone metastasis | ||||
| VCaP | + | Sensitive | Xenograft | Amplified WT AR, AR splice variants, TMPRSS-ERG fusion |
| MDA PCa 2a/b | + | Sensitive | Direct | AR mutants L702H and T878A |
| PC3 | − | Resistant | Direct | |
| CWR22(Rv1) | + | Resistant | Xenograft | H875Y AR mutant, AR splice variants, WT PTEN, Zinc Finger Duplication |
| Organ metastasis | ||||
| DU-145 (brain) | − | Resistant | Direct | |
| DuCaP (dura) | + | Sensitive | Xenograft | Amplified WT AR |
LNCaP is a cell line derived from a lymph node metastasis. It harbors a T877A AR mutation, with ligand promiscuity and has only a modest potential to form xenografts in nude mice [9]. It has multiple derivative cell lines, differing from the maternal LNCaP cell lines on different points: C4-2b (PSA +, bone metastatic in mice), LNCaP-abl (androgen-resistant, androgen depleted medium), LNCaP-AR (androgen-resistant, tissue culture), ResA and B (androgen- and anti-androgen-resistant) [10][11]. VCaP cells come from a metastatic lesion and have a wild-type, yet amplified, AR. VCaP cells are especially interesting in preclinical research as they express the TMPRSS2-ERG gene arrangement, commonly seen in PCa patients [12]. DuCaP is derived from a hormone refractory xenograft of a dura mater metastasis and is expressing PSA and overexpressing wildtype AR [7][13]. Multiple LAPC cell lines are androgen-responsive and developed from a xenograft of a PCa lymph node (LAPC-4) and bone (LAPC-9) metastasis. LAPC-4 is characterized by mutations of p53 and wildtype PTEN [14]. DU-145 are derived from a PCa brain metastasis. It does not express AR and is therefore hormone-insensitive [15]. PC3 cells are grown from a PCa bone metastasis and are, similarly to DU-145, AR negative. [16]. Some studies suggested PC3 cells to have neuroendocrine features reflecting small cell PCa and stem-like features [17][18]. 22Rv1 is a cell line derived from a relapsing xenograft of the CWR22 cell line in mice that were castrated [19]. Its AR is mutated (H874Y), while expressing a truncated AR in parallel because of an intragenic duplication of exon 3 and has a wildtype PTEN. It is mostly used in research involving splice variants of the AR [8]. MDA PCa 2A is a cell line derived from bone metastasis, being AR positive, harboring AR mutants L702H and T878A [6][20].
The big advantages of these cell lines are their relative simplicity and ease of culturing in different conditions. This enables the rapid validations of hypotheses and the simultaneous testing of multiple compounds. Also beneficial is the high amount of data that are already available on them (i.e., on DepMap and CCLE) [21][22]. Each cell line should, however, be considered as a proxy of a very specific type of PCa (i.e., AR/PSA positive, TMPRSS2-ERG fusion positive, PTEN status) (Table 3).
For example, in Tran et all., they used LNCaP cells with increased expression of wild type AR and VCaP cells. In these cells, together with the derived xenograft model, the AR inhibitor MDV3100 was identified, which was later renamed to enzalutamide [23]. PCa cell lines play an important role in investigating the plethora of AR resistance mechanisms. Such resistance to AR signaling inhibitors may pre-exist in the patient (de novo resistance) or may develop upon treatment of the patient (acquired resistance). Both types of resistance can be recapitulated in culture conditions, which enables researchers to study them in detail.
De novo resistance mechanisms can be studied in cellular models generated via genetically modifying PCa cells (i.e., stable transfections, up/down-regulation of a gene by siRNA or CRISPR/Cas9), but this largely limits their use in validation studies. In contrast to de novo resistance studies, cell lines with acquired resistance may lead to the discovery of novel resistance mechanisms, but it is challenging to identify the underlying mechanism [11]. More recently, genome-wide CRISPR-Cas9 screenings allowed the discovery of novel resistance mechanisms [24]. While these cell lines certainly have their place in the preclinical research landscape, they do not reflect all aspects of the heterogeneous primary tumor biology. This makes investigating, for example, the role of tumor microenvironment difficult, as only one cell type is present in the cultures. Another shortcoming is that cell lines all have severe aneuploidy. For example, the complex chromosomes of LNCaP (87 chromosomes), PC3 (58/113), and DU145 (62 chromosomes) have structural alterations of multiple chromosomes (1, 2, 4, 6, 10, 15, and 16) [25].
Mouse xenografts are commonly created by transplanting human cell lines in mice. This can be performed in different locations: subrenal (under the renal capsule), orthotopic (in the mouse prostate), and subcutaneous (under the skin), each with its specific characteristics [8]. Creating these xenografts allows the analysis of metastasis and treatment response in an in vivo setting (Table 3).
For example, in Nguyen et al., multiple PDX were developed, reflecting prostate cancer features such as AR amplification, PTEN deletion, TP53 deletion/mutation, RB1 loss, TMPRSS2-ERG rearrangements, SPOP mutation, MSH2/MSH6 genomic aberrations, and BRCA2 loss [26]. From these models, Lam et al. selected the enzalutamide-resistant models to study supraphysiological testosterone treatment as a resensitization strategy for AR-targeted therapies [27].
Three-dimensional cell cultures can similarly be valuable in creating a basis to investigate cell–cell interactions. Cell lines can consequently be studied in a tumor microenvironment [8][28]. This can be made from artificial or biologic materials. The effects of the artificially engineered 3D scaffolds on the cells and their androgen sensitivity remain under investigation [28][29].
For example, in the spheroids of Eder et al., cancer-associated fibroblasts were co-cultured with LNCaP, LAPC4, and DuCaP. This made DuCaP resistant to enzalutamide, by increasing the Akt PI3K pathway (see further). Novel treatments can be proposed and tested in these resistant tumors [30].
Transgenic technology has enabled mimicking genetic changes that have been discovered in PCa. The genes under investigation can be knocked out or altered specifically in mouse prostate luminal cells. In this way, GEMMs of different pathways that lead to treatment resistance in humans have been recreated, of which the most commonly altered mechanisms are represented in Table 2 [31][32].
Table 2. Overview of possible targetable pathways for genetically engineered mouse models (GEMM) of prostate cancer (PCa). Adapted from [32].
| GEMM | PCa Inducement |
Specific Characteristics |
|---|---|---|
| Localized PCa alterations | ||
| TMPRSS-ERG fusion | + − | Modest phenotype on its own, additive effect with PTEN loss |
| SPOP mutation | + − | Modest phenotype on its own, additive effect with PTEN loss |
| Advanced PCa alterations | ||
| PTEN loss | + | Most frequent GEMM, Clinical stage ranges between models. Additive effects with other alterations |
| Tumor surpressor genes losses (RB/p53) | + − | Modest phenotype on its own, additive effect with PTEN/BRCA mutations/RB/p53 losses |
| DNA repair genes mutation | + | Fewer models available, study of PARP inhibitors. Additive effects with PTEN/RB/p53 losses |
| Oncogenes | + | Clinical stage ranges between Myc levels, additive effects with p53, and PTEN models |
| Other models—mechanistic studies of targets | ||
As a consequence, human PCa phenotypes can be mimicked in GEMMs, and murine metastatic signatures that can be relevant in humans can be discovered [33]. While inter-species differences have to be considered, these approaches have led to major breakthroughs and provided an increased potential to pre-clinical in vivo research [31][32].
Besides mimicking PCa phenotypes, GEMMs can also be used to study non-cancerous targets of hormone therapy. Multiple models studying the AR have been created from this perspective. Although these models do not directly result in novel prostate cancer treatments, their impact is indirect by improving the understanding of the AR and its pathways [34][35] (Table 2).
For example, in the TRAMP model, researchers altered the expression of SV40 antigens to create prostate cancer models reflecting the heterogeneous AR and p53 expression and castration response seen in patients [36].
Different patient-derived models have been reported, including primary cell cultures, patient-derived explants, and patient-derived xenografts [28]. These models are similar to other models, but are constructed from an actual tumor (Table 3). Consequently, these correlate better to the clinical setting than the pretreated cell lines.
Table 3. Overview of the advantages and disadvantages of different preclinical models. General PCa-derived and patient-derived models (indicated in color) are discussed. Prostate cancer, PCa.
| Model | Advantages/Disadvantages | |
|---|---|---|
![]() |
PCa cell line experiments | + Easy to culture, high-throughput system − Very homogeneous, not reflective of clinical tumors |
![]() |
Genetically modified PCa cell lines | + Easy validation of de novo resistance mechanisms and alterations from databases − Acquired resistance more difficult to study |
![]() |
3D cell cultures/organoids | + Study of Cell-Cell interaction − Scaffold material can alter cellular processes |
![]() |
Mouse Xenografts of PCa | + Study of metastasis and treatment response in vivo + Working endocrine system − Limitations similar to injected cell lines |
![]() |
Genetically modified mouse models | + In vivo validation of genetic alterations and underlying pathways − Inter species differences, questionable generalizability to human prostate cancers |
![]() |
Patient derived cell lines | + Good correlation with specific human tumor + Reproducibility of experiments, high throughput − Only representing a certain tumor type, no cell-cell interaction |
![]() |
Patient derived tissue cultures | + Excellent representation of respective type of prostate cancer − Limited life span, cannot be propagated |
![]() |
Patient derived 3D cell cultures/organoids | + Study of Cell-Cell interaction in specific tumor subtypes + Medium to High throughput − Scaffold material can alter cellular processes − Technically challenging |
![]() |
Patient derived Xenografts | + Study of metastasis and treatment of a certain tumor in vivo + Working endocrine system − No immune system, overgrowing murine tissue, tissue collection only at endpoint. |
At first, primary cells were grown in 2D cultures much like the cell lines discussed in Section 2.2, or they were grown in Matrigel to enable 3D culture. More recently, conditions have been optimized for 3D cultures (i.e., with printed scaffolds), spheroids, and organoids. As such, these primary cultures offer the possibility to expand tumor cells in vitro and even can be genetically modified. This enables their use in medium and high throughput assays for drug screening [28]. Although technically challenging, these models allow a detailed analysis in the study of the tumor microenvironment and cell–cell interactions [37]. Patient-derived organoids were successfully developed by Gao and colleagues in advanced disease stages [38]. More recently, these models have been shown to be very promising in reflecting rare tumor types (i.e., NEPC) and validating novel translational research methods (i.e., validation of single cell sequencing of prostate cancer) [39][40].
Patient-derived explants consist of primary tumor biopsies that are kept in their integrity in culture ex vivo. The culture conditions have been optimized considerably so that these models retain the functional and structural characteristics of the tissue, which enables their successful use in preclinical studies [41][42]. Consequently, these models create robust preclinical findings. Unfortunately, they cannot be propagated and will undergo changes after one or two weeks of culture, which limits their use to short term studies.
Patient-derived xenograft models are created by inserting tumor tissue in nude mice (see Section 2.1.2. These models allow timely interventions to be performed in living animals with a complete endocrine system. Downsides to xenografting are the lacking immune system, the gradual overgrowth of murine stromal cells, and the restriction to collect tissue only at the harvest time point [28].
An ideal model for this setting would start from a heterogeneous untreated cell population of PCa. Models with a high throughput and methodologic flexibility are preferred to allow the study of different settings and interventions (Table 3). The available models are mostly derived from pre-treated metastatic patients. It is therefore challenging to find ideal preclinical models that faithfully reflect resistance to AR-targeted therapies. Most preclinical models are therefore only suitable to answer specific scientific questions. The lack of representative preclinical models undoubtedly explains the high failure rates of clinical trials with novel treatments [28].
This entry is adapted from the peer-reviewed paper 10.3390/cancers13040915