Enhancing spatial resolution in energy modelling is crucial for a deeper understanding of technology costs, timing, and generation mix [27]. Indeed, this approach encompasses factors affecting demand, supply-side elements, and technological characterization of ESOMs [27]. In this context, geographical information systems (GISs) emerge as a tool that yields promising results in calculating weather potentials, notably for wind (including both offshore and onshore) and solar energy at very high resolution [32]. For example, a study [33] demonstrated that up to 47% of the yearly averaged wind power could be used as baseload power, thanks to a local GIS-based analysis. These approaches are advantageous not only for determining the optimal locations of VRES plants based on meteorological conditions [34] but also for characterizing entire regions or technologies from a technoeconomic point of view, serving as an input for ESOM. To clarify the importance of this practice, a study using a mixed-integer linear programming (MILP) model for heat decarbonization identified spatial resolution as a key variable in influencing scenario results, alongside demand, costs, and efficiency [33], by performing a global sensitivity analysis. Concerning the benefit (or adverse side effect) of varying spatial resolution, Stolten et al. [28] have already demonstrated the goodness of this practice. In their work, they used region clustering based on energy potential characteristics and found that increasing spatial resolution improves model accuracy. However, they also noted a saturation effect of this benefit at higher resolutions and emphasized the importance of considering both time and spatial resolution to increase accuracy. A remarkable limitation of the study is the spatial scope given the focus on the whole European area. Indeed, as confirmed by Frysztacki et al. [35,36], modelling a fully renewable European electricity system, even at a resolution of one node per country is insufficient to retrieve reliable capacity expansion suggestions. Other attempts at a lower spatial scale have been conducted. Downscaling to the national model, a comprehensive review on the topic of spatial resolution in ESOMs is performed in [20] by analyzing 36 multi-sectoral ESOMs from 22 countries, with varying levels of spatial and temporal resolution. The analysis demonstrates to what extent higher spatial resolution impacts the outcomes of energy system analysis. They observed that fine-grained spatial resolution in ESOMs provides significant added value for regions with heterogeneous renewable potential or higher variability in energy services. As spatially resolved models can significantly alter the scenario outcomes, particularly in scenarios with high shares of variable renewable energy sources, disaggregating renewable resources tends to reduce costs. At smaller spatial scales, however, a lack of relevant works is highlighted.

Incorporating land use and spatial explicitness into ESOMs at the local scale necessitates a comprehensive assessment phase. This assessment phase involves first a detailed analysis of land eligibility (LE) for VRES installations and then the VRES potential estimation [28].

The LE analysis focuses on identifying land that is unsuitable for renewable energy projects due to various limitations. Technical constraints encompass existing renewable energy facilities and areas with limited natural wind or solar resources [21]. Regulatory and environmental restrictions, considering local community concerns regarding land usage, can also curtail the available land for renewable energy projects [21]. It is crucial to consider all these limitations when evaluating the trade-offs and challenges related to land availability for renewable energy projects. A pertinent example at the European level underscores this point: to meet the targets for wind and photovoltaic solar capacity, substantial land area is required. For instance, in France, Germany, and Italy, which are expected to host approximately 50% of the EU’s renewable energy installations, achieving the 2040 renewable capacity goals would require an additional 23,000 to 35,000 square kilometers of land. This area is roughly equivalent to the size of Belgium [37]. This underscores the need for comprehensive land eligibility assessments to realistically achieve renewable energy targets. Examples of LE analyses in the literature are common, as analyzed in the review of Ryberg et al. [21], covering more than 50 works. However, Ryberg concludes that, despite this attention from the community, inconsistencies between studies have prevented a collective understanding of how different criteria influence land availability. In response to that, a major attempt to unify the way LE is evaluated is performed in the GLAES tool (Geospatial Land Availability for Energy Systems) [21]. However, there is a significant gap in the current research: the application and validation of the GLAES framework on a smaller scale has not been explored. Validating GLAES at a small scale is crucial to confirm its reliability and flexibility in different, often more complex local environments.

For the VRES potential assessment, several raw data sources are available and have been listed in a rigorous analysis in [38]. In this study, a repository of all the well-established sources classified by temporal and spatial resolution is proposed, encompassing all the existing renewable energy sources. In addition, Maclaurin et al. [30] developed The Renewable Energy Potential (reV) model, a platform for the detailed assessment of renewable energy resources and their geospatial intersection with grid infrastructure and land use characteristics. Moreover, a major recent attempt exists to incorporate all these VRES potential estimations in a unique versatile tool [39]. Such a framework, called “at-lite”, retrieves global historical weather data, and converts it into power generation potentials and time series for VRES technologies like wind and solar power. These efforts, despite their robustness, often lack the necessary precision at a granular spatial scale. This limitation is significant when considering the intricacies of local environments and the specific demands of smaller regions. Consequently, there is a pressing need for the integration of LE and VRES assessments at a more detailed local level.

Up to this point, the purpose of the increased spatial resolution and better land characterization is to provide better planning solutions, generally reflected in minor system costs. But there is another area where land-specific consideration may help. Notably, together with the cost, the problem of optimal siting of renewable energy must also be addressed [40], to make, for instance, ESOMs capable of providing site-specific insights about plant siting. There is a wide range of research papers that have attempted to extract the optimum location of renewable energy facilities. In [41], a multi-attribute decision-making (MADM) approach and evaluation for ideal site selection for wind power plants was developed. MADM is a process for evaluating and comparing options based on multiple criteria or attributes [42]. In another study [43], the authors developed a novel framework for determining the optimal location for constructing PV farms, focusing on environmental sustainability. They employed an AHP that, like MADM, in energy decision-making aids in prioritizing various energy solutions based on multiple criteria like cost, efficiency, and environmental impact [44]. The discussed methodology excels in identifying optimal locations for renewable energy facilities by leveraging site-specific characteristics like regional potential. However, those analyses often lack integration with broader energy systems, biasing the optimal land management choice. Indeed, the superior suitability of a site for VRES installation does not necessarily imply that deploying VRES is the optimal use for that site. Alternative land uses, such as afforestation or land-use change, may offer greater effectiveness in systemic decarbonization perspective. Therefore, incorporating these optimal siting methodologies in ESOMs becomes relevant also for a more comprehensive approach to energy planning, ensuring that site selection not only focuses on local potential but also aligns with wider system efficiency and sustainability goals.

A final point emerging from the literature is related to the sectorial trade-offs between the energy and the land use-related sectors [24]. As decarbonization policies are developed, conflicts between sectors are leading to competing demands for land [45]. Renewable energy projects, as well as afforestation for carbon sequestration, often compete with agricultural land uses, thus emphasizing the need for integrated planning that considers both energy requirements and sustainable land management [46]. This nexus has an impact both on the economic and the emission side [47] of the energy planning process. A global study using an IAM highlighted the economic aspect of land use in energy planning, revealing that solar energy yields are higher over croplands, potentially leading to land use competition [47]. However, the study also presents agrivoltaics as a solution to this challenge. Agrivoltaics, combining agriculture and solar energy on the same land, can alleviate the competition for land by enabling simultaneous agricultural production and energy generation [47]. From an emission perspective, a study [8] reveals that land cover changes, both direct and indirect, can cause a net release of carbon ranging from 0 to 50 g CO₂/kWh, depending on various factors like region, solar technology efficiency, and land management practices in solar parks. Since the significance in capturing those aspects is demonstrated by the above-mentioned literature, comprehensive ESOMs should include them. Nevertheless, an extensive review states that more work is needed to effectively consider policy trade-offs between the land and energy sector in models, especially from an economic and carbon balance point of view [48]. In particular, ESOMs currently lack representation of land and its related properties, such as crop yields and carbon sequestration potentials, essential for the abovementioned trade-off estimations [49]. Their integration is crucial for comprehensive land-centric perspectives on carbon capture and mitigation strategies [49].