Metal Bis(trimethylsilyl)amides: Comparison
View Latest Version
Please note this is a comparison between Version 1 by Dean Liu and Version 2 by Dean Liu.

Metal bis(trimethylsilyl)amides (often abbreviated as metal silylamides) are coordination complexes composed of a cationic metal with anionic bis(trimethylsilyl)amide ligands and are part of a broader category of metal amides. Due to the bulky hydrocarbon backbone metal bis(trimethylsilyl)amide complexes have low lattice energies and are lipophilic . For this reason, they are soluble in a range of nonpolar organic solvents, in contrast to simple metal halides, which only dissolve in reactive solvents. These steric bulky complexes are molecular, consisting of mono-, di-, and tetramers. Having a built-in base, these compounds conveniently react with even weakly protic reagents. The class of ligands and pioneering studies on their coordination compounds were described by Bürger and Wannagat. The ligands are often denoted hmds (e.g. M(N(SiMe3)2)3 = M(hmds)3) in reference to the hexamethyldisilazane from which they are prepared.

  • silylamides
  • bistrimethylsilylamides
  • bistrimethylsilylamide

1. General Methods of Preparation

Apart from group 1 and 2 complexes, a general method for preparing metal bis(trimethylsilyl)amides entails reactions of anhydrous metal chloride[1] with an alkali metal bis(trimethylsilyl)amides via a salt metathesis reaction:

MCln + n Na(hmds) → M(hmds)n + n NaCl

Alkali metal chloride formed as a by-product typically precipitates as a solid, allowing for its removal by filtration. The remaining metal bis(trimethylsilyl)amide is then often purified by distillation or sublimation.

Space-filling model of Fe[N(SiMe3)2]2. Color scheme: H is white, Fe is gray, N is blue (barely visible), Si is blue-green. https://handwiki.org/wiki/index.php?curid=1864605

2. Group 1 Complexes

Lithium, sodium, and potassium bis(trimethylsilyl)amides are commercially available. When free of solvent, the lithium[2] and sodium[3] complexes are trimeric, and the potassium complex is dimeric in solid state.[4] The lithium reagent may be prepared from n-butyllithium and bis(trimethylsilyl)amine:[5]

nBuLi + HN(SiMe3)2 → Li(hmds) + butane

The direct reaction of these molten metals with bis(trimethylsilyl)amine at high temperature has also been described:[6]

M + HN(SiMe3)2 → MN(SiMe3)2 + 1/2 H2

Alkali metal silylamides are soluble in a range of organic solvents, where they exist as aggregates, and are commonly used in organic chemistry as strong sterically hindered bases. They are also extensively used as precursors for the synthesis other bis(trimethylsilyl)amide complexes (see below).

3. Group 2 Complexes

The calcium and barium complexes may be prepared via the general method, by treating calcium iodide or barium chloride with potassium or sodium bis(trimethylsilyl)amide.[7][8] However, this method can result in potassium contamination. An improved synthesis involving the reaction of benzylpotassium with calcium iodide, followed by reaction with bis(trimethylsilyl)amine results in potassium-free material:[9]

2 BnK + CaI2 + THF → Bn2Ca(thf) + KI
Bn2Ca(thf) + 2 HN(SiMe3)2 → Ca(hmds)2 + 2 C6H5CH3 + THF

Magnesium silylamides can be prepared from dibutylmagnesium; which is commercially available as a mixture of n-Bu and s-Bu isomers. It deprotonates the free amine to yield the magnesium bis(trimethylsilyl)amide, itself commercially available.[10]

Bu2Mg + 2 HN(SiMe3)2 → Mg(hmds)2 + 2 butane

In contrast to group 1 metals, the amine N-H in bis(trimethylsilyl)amine is not acidic enough to react with the group 2 metals, however complexes may be prepared via a reaction of tin(II) bis(trimethylsilyl)amide with the appropriate metal:

M + 2 HN(SiMe3)2 ↛ M(hmds)2 + H2 (M = Mg, Ca, Sr, Ba)
M + Sn(hmds)2 → M(hmds)2 + Sn

Long reaction times are required for this synthesis and when performed in the presence of coordinating solvents, such as dimethoxyethane, adducts are formed. Hence non-coordinating solvents such as benzene or toluene must be used to obtain the free complexes.[11]

4. P-Block Complexes

Tin(II) bis(trimethylsilyl)amide is prepared from anhydrous tin(II) chloride[12] and is commercially available. It is used to prepare other metal bis(trimethylsilylamide)s via transmetallation. The group 13[13] and bismuth(III) bis(trimethylsilyl)amides[14] are prepared in the same manner; the aluminium complex may also be prepared by treating strongly basic lithium aluminium hydride with the parent amine:[13]

LiAlH4 + 4 HN(SiMe3)2 → Li(hmds) + Al(hmds)3 + 4 H2

An alternative synthesis of tetrasulfur tetranitride entails the use of a metal bis(trimethylsilyl)amide [(Me3Si)2N]2S as a precursor with pre-formed S–N bonds. [(Me3Si)2N]2S is prepared by the reaction of lithium bis(trimethylsilyl)amide and sulfur dichloride (SCl2).

2 [(CH3)3Si]2NLi + SCl2 → [((CH3)3Si)2N]2S + 2 LiCl

The metal bis(trimethylsilyl)amide [((CH3)3Si)2N]2S reacts with the combination of SCl2 and sulfuryl chloride (SO2Cl2) to form S4N4, trimethylsilyl chloride, and sulfur dioxide:[15]

2[((CH3)3Si)2N]2S + 2SCl2 + 2SO2Cl2 → S4N4 + 8 (CH3)3SiCl + 2SO2

Tetraselenium tetranitride, Se4N4, is a compound analogous to tetrasulfur tetranitride and can be synthesized by the reaction of selenium tetrachloride with [((CH3)3Si)2N]2Se. The latter compound is a metal bis(trimethylsilyl)amide and can be synthesized by the reaction of selenium tetrachloride (SeCl4), selenium monochloride (Se2Cl2) and lithium bis(trimethylsilyl)amide.[16]

5. D-Block Complexes

Frozen zinc bis(trimethylsilyl)amide. This compound melts at 12.5 °C. https://handwiki.org/wiki/index.php?curid=1922518

Frozen zinc bis(trimethylsilyl)amide. This compound melts at 12.5 °C. https://handwiki.org/wiki/index.php?curid=1922518

Titanium (left) and vanadium (right) tris{bis(trimethylsilyl)amide}. https://handwiki.org/wiki/index.php?curid=1544946

In line with the general method, bis(trimethylsilyl)amides of transition metals are prepared by a reaction between the metal halides (typically chlorides) and sodium bis(trimethylsilyl)amide,[17] some variation does exist however, for instance the synthesis of blue Ti(N(SiMe3)2)3 using the soluble precursor TiCl3(Et3N)3.[18] The melting and boiling points of the complexes decrease across the series, with Group 12 metals being sufficiently volatile to allow purification by distillation.[19]

Iron complexes are notable for having been isolated in both the ferrous (II) and ferric (III) oxidation states. Fe[N(SiMe3)2]3 can be prepared by treating iron trichloride with lithium bis(trimethylsilyl)amide[20] and is paramagnetic as the high spin iron(III) contains 5 unpaired electrons.

FeCl3 + 3LiN(SiMe3)2 → Fe[N(SiMe3)2]3 + 3LiCl

Similarly, the two coordinate Fe[N(SiMe3)2]2 complex is prepared by treating iron dichloride with lithium bis(trimethylsilyl)amide:[21]

FeCl2 + 2LiN(SiMe3)2 → Fe[N(SiMe3)2]2 + 2LiCl
Iron tris{bis(trimethylsilyl)amide}. https://handwiki.org/wiki/index.php?curid=1588207

The dark green Fe[N(SiMe3)2]2 complex exists in two forms depending on its physical state. At room temperature the compound is a monomeric liquid with two-coordinate Fe centers possessing S4 symmetry,[22] in the solid state it forms a dimer with trigonal planar iron centers and bridging amido groups.[23] The low coordination number of the iron complex is largely due to the steric effects of the bulky bis(trimethylsilyl)amide, however the complex will bind THF to give the adduct, {(THF)Fe[N(SiMe3)2]2}.[24] Similar behavior can be seen in Mn(hmds)2 and Co(hmds)2, which are monomeric in the gas phase[22] and dimeric in the crystalline phase.[25][26] Group 11 complexes are especially prone to oligomerization, forming tetramers in the solid phase.[27][28][29] The Lewis acid properties of the group 12 complexes have been reported[30] and the improved E and C numbers for the Zn and Cd complexes are listed in the ECW model.

CompoundAppearancem.p. (°C)b.p. (°C)SpinComment
Group 3 complexes
Sc(hmds)3[31]Colorless solid172-174 S = 0 
Y(hmds)3White solid180-184105 °C/10 mmHg (subl.)S = 0Commercially available
Group 4 complexes
Ti(hmds)3[31]Bright blue solid  S = 1/2Prepared from TiCl3(N(CH3)3)2
Group 5 complexes
V(hmds)3[32]Dark violet solid174-176 S = 1Prepared from VCl3(N(CH3)3)2
Group 6 complexes
Cr(hmds)3[17][31]Apple-green solid120110 / 0.5 mmHg (subl.)S = 3/2 
Group 7 complexes
Mn(hmds)2[17][22]Beige solid 100 / 0.2 mmHgS = 5/2 
Mn(hmds)3[33]Violet solid108-110 S = 2 
Group 8 complexes
Fe(hmds)2[34]Light green solid 90-100 / 0.01 mmHg  
Fe(hmds)3[31]Dark green solid 120 / 0.5 mmHg (subl.)S = 5/2 
Group 9 complexes
Co(hmds)[35]Black Solid   Tetrameric in the solid state
Co(hmds)2[36]Green solid73101 / 0.6 mmHg  
Co(hmds)3[33]Dark olive green solid86-88 S = 2 
Group 10 complexes
Ni(hmds)[37]Black solid>250  Tetrameric in the solid state
Ni(hmds)2[17]Red liquid 80 / 0.2 mmHg  
Group 11 complexes
Cu(hmds)[17]Colorless solid 180 / 0.2 mmHg (subl.)S = 0 
Ag(hmds)[28]Colorless solid  S = 0Insoluble in hydrocarbons and diethyl ether
Au(hmds)[29]Colorless solid  S = 0 
Group 12 complexes
Zn(hmds)2[19]Colorless liquid12.582 / 0.5 mmHgS = 0Commercially available
Cd(hmds)2[19]Colorless liquid893 / 0.5 mmHgS = 0 
Hg(hmds)2[19]Colorless liquid1178 / 0.15 mmHgS = 0 

6. F-Block Complexes

Lanthanide triflates can be convenient anhydrous precursors to many bis(trimethylsilyl)amides:[38]

Ln(OTf)3 + 3 M(hmds) → Ln(hmds)3 + 3 MOTf (M = Li, Na, K; Ln = La, Nd, Sm, Er)

However it is more common to see the preparation of lanthanide bis(trimethylsilyl)amides from anhydrous lanthanide chlorides,[39] as these are cheaper. The reaction is performed in THF and requires a period at reflux. Once formed, the product is separated from LiCl by exchanging the solvent for toluene, in which Ln(hmds)3 is soluble but LiCl is not.

Ln(Cl)3 + 3 HMDS + 3 nBuLi → Ln(hmds)3 + 3 LiCl + 3 butane (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Ho, Yb, and Lu)

Silylamides are important as starting materials in lanthanide chemistry, as lanthanide chlorides have either poor solubility or poor stability in common solvents. As a result of this nearly all lanthanide silylamides are commercially available.

CompoundAppearancem.p. (°C)Comment
La(hmds)3White145-149 
Ce(hmds)3Yellow-brown132-140 
Pr(hmds)3Pale green155-158 
Nd(hmds)3Pale blue161-164 
Sm(hmds)3Pale yellow155-158 
Eu(hmds)3Orange159-162 
Gd(hmds)3White160-163 
Dy(hmds)3[40]Pale green157–160 
Ho(hmds)3Cream161-164 
Yb(hmds)3Yellow162-165 
Lu(hmds)3White167-170 

There has also been some success in the synthesis and characterization of actinide bis(trimethylsilyl)amides.[41][42] A convenient synthetic route uses the THF-adducts of the iodide salts AnI3(THF)4 as starting materials.

CompoundAppearancem.p. (°C)Comment
U(hmds)3Red-purple137–140Sublimates at 80–100 °C (ca. 10−3 torr)
Np(hmds)3Blue-black Sublimates at 60 °C (ca. 10−4 torr)
Pu(hmds)3Yellow-orange Sublimates at 60 °C (ca. 10−4 torr)

7. Safety

Metal bis(trimethylsilyl)amides are strong bases. They are corrosive, and are incompatible with many chlorinated solvents. These compounds react vigorously with water, and should be manipulated with air-free technique.

References

  1. Many metal chlorides may be dried by refluxing in thionyl chloride. See Alfred R. Pray; Richard F. Heitmiller; Stanley Strycker (1990). "Anhydrous Metal Chlorides". Inorganic Syntheses. Inorg. Synth.. 28. pp. 321–323. doi:10.1002/9780470132593.ch80. ISBN 978-0-470-13259-3.  https://dx.doi.org/10.1002%2F9780470132593.ch80
  2. Mootz, D.; Zinnius, A.; Böttcher, B. (1969). "Assoziation im festen Zustand von Bis(trimethylsilyl)amidolithium und Methyltrimethylsilanolatoberyllium". Angew. Chem. 81 (10): 398–399. doi:10.1002/ange.19690811015.  https://dx.doi.org/10.1002%2Fange.19690811015
  3. Driess, Matthias; Pritzkow, Hans; Skipinski, Markus; Winkler, Uwe (1997). "Synthesis and Solid State Structures of Sterically Congested Sodium and Cesium Silyl(fluorosilyl)phosphanide Aggregates and Structural Characterization of the Trimeric Sodium Bis(trimethylsilyl)amide". Organometallics 16 (23): 5108–5112. doi:10.1021/om970444c.  https://dx.doi.org/10.1021%2Fom970444c
  4. Tesh, Kris F.; Hanusa, Timothy P.; Huffman, John C. (1990). "Ion pairing in [bis(trimethylsilyl)amido]potassium: The x-ray crystal structure of unsolvated [KN(SiMe3)2]2". Inorg. Chem. 29 (8): 1584–1586. doi:10.1021/ic00333a029.  https://dx.doi.org/10.1021%2Fic00333a029
  5. Amonoo-Neizer, E. H.; Shaw, R. A.; Skovlin, D. O.; Smith, B. C.; Rosenthal, Joel W.; Jolly, William L. (1966). Lithium Bis(Trimethylsilyl)Amide and Tris(Trimethylsilyl)Amine. Inorganic Syntheses. 8. 19–22. doi:10.1002/9780470132395.ch6. ISBN 978-0-470-13239-5.  https://dx.doi.org/10.1002%2F9780470132395.ch6
  6. US patent 5420322 http://v3.espacenet.com/textdoc?DB=EPODOC&IDX=US5420322
  7. Boncella, J. M.; Coston, C. J.; Cammack, J. K. (1991). "The synthesis of bis(hexamethyldisilylamido)barium(II)". Polyhedron 10 (7): 769–770. doi:10.1016/s0277-5387(00)83767-5.  https://dx.doi.org/10.1016%2Fs0277-5387%2800%2983767-5
  8. Tanner, P. S.; Burkey, D. J.; Hanusa, T. P. (1995). "Cyclopentadienyl ring metathesis with bis(pentamethylcyclopentadienyl)calcium as a route to mixed ring organolanthanide complexes; the crystal structure of (C5Me5)2Nd(C5H5)". Polyhedron 14 (2): 331–333. doi:10.1016/0277-5387(94)00316-7.  https://dx.doi.org/10.1016%2F0277-5387%2894%2900316-7
  9. Johns, Adam M.; Chmely, Stephen C.; Hanusa, Timothy P. (2009). "Solution Interaction of Potassium and Calcium Bis(trimethylsilyl)amides; Preparation of Ca[N(SiMe3)2]2from Dibenzylcalcium". Inorg. Chem. 48 (4): 1380–1384. doi:10.1021/ic8012766. PMID 19138130.  https://dx.doi.org/10.1021%2Fic8012766
  10. LM Engelhardt; BS Jolly; PC Junk; CL Raston; BW Skelton; AH White (1986). "Highly Hindered Amido-Lithium and Amido-Magnesium Complexes. Crystal-Structures of [Li(μ-N(SiMe3)2)(Tetrahydrofuran)]2 and [MgBus(μ-N(SiMe3)2)]2". Aust. J. Chem. 39 (9): 1337. doi:10.1071/CH9861337.  https://dx.doi.org/10.1071%2FCH9861337
  11. Westerhausen, Matthias. (1991). "Synthesis and spectroscopic properties of bis(trimethylsilyl)amides of the alkaline-earth metals magnesium, calcium, strontium, and barium". Inorg. Chem. 30: 96–101. doi:10.1021/ic00001a018.  https://dx.doi.org/10.1021%2Fic00001a018
  12. Schaeffer, Charles D.; Myers, Lori K.; Coley, Suzanne M.; Otter, Julie C.; Yoder, Claude H. (1990). "Preparation, analysis, and reactivity of bis[N,N-bis(trimethylsilyl)amino]tin(II): An advanced undergraduate laboratory project in organometallic synthesis". J. Chem. Educ. 67 (4): 347. doi:10.1021/ed067p347. Bibcode: 1990JChEd..67..347S.  https://dx.doi.org/10.1021%2Fed067p347
  13. Bürger, H; Cichon, J; Goetze, U; Wannagat, U; Wismar, H.J (1971). "Beiträgezur chemie der silicium-stickstoff-verbindungen CVII. Darstellung, schwingungsspektren und normalkoordinatenanalyse von disilylamiden der 3. Gruppe: M[N(SiMe3)2]3 mit M = Al, Ga und In". J. Organomet. Chem. 33: 1–12. doi:10.1016/s0022-328x(00)80797-4.  https://dx.doi.org/10.1016%2Fs0022-328x%2800%2980797-4
  14. Vehkamäki, Marko; Hatanpää, Timo; Ritala, Mikko; Leskelä, Markku (2004). "Bismuth precursors for atomic layer deposition of bismuth-containing oxide films". Journal of Materials Chemistry 14 (21): 3191. doi:10.1039/b405891g.  https://dx.doi.org/10.1039%2Fb405891g
  15. Maaninen, A.; Shvari, J.; Laitinen, R. S.; Chivers, T (2002). Coucouvanis, Dimitri. ed. Compounds of General Interest. 33. New York: John Wiley & Sons, Inc.. 196–199. doi:10.1002/0471224502.ch4. ISBN 9780471208259.  https://dx.doi.org/10.1002%2F0471224502.ch4
  16. Siivari, Jari; Chivers, Tristram; Laitinen, Risto S. (1993). "A simple, efficient synthesis of tetraselenium tetranitride". Inorganic Chemistry 32 (8): 1519–1520. doi:10.1021/ic00060a031.  https://dx.doi.org/10.1021%2Fic00060a031
  17. H. Bürger; U. Wannagat (1963). "Silylamido-Derivate von Chrom, Mangan, Nickel und Kupfer". Monatshefte für Chemie 95 (4–5): 1099–1102. doi:10.1007/BF00904702.  https://dx.doi.org/10.1007%2FBF00904702
  18. Bradley, Donald C.; Copperthwaite, Richard G.; Extine, M. W.; Reichert, W. W.; Chisholm, Malcolm H. (1978). "Transition Metal Complexes of Bis(Trimethyl-silyl)Amine (1,1,1,3,3,3-Hexamethyldisilazane)". Inorganic Syntheses. Inorganic Syntheses. 18. pp. 112. doi:10.1002/9780470132494.ch18. ISBN 9780470132494.  https://dx.doi.org/10.1002%2F9780470132494.ch18
  19. Bürger, H; Sawodny, Wolfgang; Wannagat, Ulrich (1965). "Darstellung und schwinkungsspektren von silylamiden der elemente zink, cadmium und quecksilber". J. Organomet. Chem. 3 (2): 113–120. doi:10.1016/s0022-328x(00)84740-3.  https://dx.doi.org/10.1016%2Fs0022-328x%2800%2984740-3
  20. Douglas, Bodie E. (1978). Inorganic Syntheses, 18.. Hoboken: John Wiley & Sons. ISBN 978-0-470-13284-5. 
  21. Rauchfuss, Thomas B. (2010). Inorganic syntheses.. Hoboken, N.J.: John Wiley & Sons. ISBN 978-0-470-65156-8. 
  22. Andersen, R. A.; Faegri, Knut; Green, Jennifer C.; Haaland, Arne; Lappert, M. F.; Leung, Wing Por; Rypdal, Kristin (1 May 1988). "Synthesis of bis[bis(trimethylsilyl)amido]iron(II). Structure and bonding in M[N(SiMe3)2]2 (M = manganese, iron, cobalt): two-coordinate transition-metal amides". Inorganic Chemistry 27 (10): 1782–1786. doi:10.1021/ic00283a022.  https://dx.doi.org/10.1021%2Fic00283a022
  23. Rauchfuss, Thomas B, ed (2010). Inorganic Syntheses. Inorganic Syntheses. doi:10.1002/9780470651568. ISBN 978-0-470-65156-8.  https://dx.doi.org/10.1002%2F9780470651568
  24. Sulway, Scott A.; Collison, David; McDouall, Joseph J. W.; Tuna, Floriana; Layfield, Richard A. (21 March 2011). "Iron(II) Cage Complexes of N-Heterocyclic Amide and Bis(trimethylsilyl)amide Ligands: Synthesis, Structure, and Magnetic Properties". Inorganic Chemistry 50 (6): 2521–2526. doi:10.1021/ic102341a. PMID 21314147.  https://dx.doi.org/10.1021%2Fic102341a
  25. Bradley, Donald C.; Hursthouse, Michael B.; Malik, K. M. Abdul; Möseler, Reinhold (1978). "The crystal molecular structure of "bis(hexamethyldisilylamido) manganese"". Transition Metal Chemistry 3 (1): 253–254. doi:10.1007/BF01393560.  https://dx.doi.org/10.1007%2FBF01393560
  26. Murray, Brendan D.; Power, Philip P. (1984). "Three-Coordinate Metal Amides of Manganese(II) and Cobalt(II): Synthesis and X-ray Structure of the First Tris(silylamide) of Manganese and the X-ray Crystal Structures of [M2(N(SiMe3)2)4] (M = Mn, Co)". Inorganic Chemistry 23 (26): 4584–4588. doi:10.1021/ic00194a036.  https://dx.doi.org/10.1021%2Fic00194a036
  27. James, Alicia M.; Laxman, Ravi K.; Fronczek, Frank R.; Maverick, Andrew W. (1998). "Phosphorescence and Structure of a Tetrameric Copper(I)-Amide Cluster". Inorganic Chemistry 37 (15): 3785–3791. doi:10.1021/ic971341p. PMID 11670480.  https://dx.doi.org/10.1021%2Fic971341p
  28. Hitchcock, Peter B.; Lappert, Michael F.; Pierssens, Luc J.-M. (1996). "Synthesis and X-ray molecular structures of the silver(I) amides [4] and [4]"]. Chemical Communications (10): 1189–1190. doi:10.1039/CC9960001189. http://pubs.rsc.org/en/Content/ArticleLanding/1996/CC/cc9960001189#!divAbstract. 
  29. Bunge, Scott D.; Just, Oliver; Rees, William S. Jr (2000). "[4]: The First Base-Free Gold Amide". Angewandte Chemie International Edition 39 (17): 3082–3084. doi:10.1002/1521-3773(20000901)39:17<3082::AID-ANIE3082>3.0.CO;2-2.  https://dx.doi.org/10.1002%2F1521-3773%2820000901%2939%3A17%3C3082%3A%3AAID-ANIE3082%3E3.0.CO%3B2-2
  30. Fisher, K. J.; Drago, R. S. (1975). "Trends in the Acidities of the Zinc Family Elements". Inorganic Chemistry 11: 2804-2808. doi:10.1021/ic50153a041.  https://dx.doi.org/10.1021%2Fic50153a041
  31. D. C. Bradley; R.G. Copperthwaite (1978). "Transition Metal Complexes of Bis(Trimethyl-silyl)Amine (1,1,1,3,3,3-Hexamethyldisilazane)". Transition Metal Complexes of Bis(trimethylsilyl)amine. Inorg. Synth.. 18. pp. 112–120. doi:10.1002/9780470132494.ch18. ISBN 978-0-470-13249-4.  https://dx.doi.org/10.1002%2F9780470132494.ch18
  32. Wagner, Clifton L.; Phan, Nathan A.; Fettinger, James C.; Berben, Louise A.; Power, Philip P. (2019-04-05). "New Characterization of V 3 : Reductions of Tris[bis(trimethylsilyl)amido]vanadium(III) and -chromium(III) To Afford the Reduced Metal(II) Anions [M 3 ] − (M = V and Cr)" (in en). Inorganic Chemistry 58 (9): 6095–6101. doi:10.1021/acs.inorgchem.9b00381. ISSN 0020-1669. PMID 30950608.  https://dx.doi.org/10.1021%2Facs.inorgchem.9b00381
  33. Ellison, Jeffrey J.; Power, Philip P.; Shoner, Steven C. (1989). "First Examples of Three-Coordinate Manganese(III) and Cobalt(III): Synthesis and Characterization of the Complexes M[N(SiMe3)2]3 (M = Mn or Co)". Inorganic Chemistry 111 (20): 8044–8046. doi:10.1021/ja00202a071.  https://dx.doi.org/10.1021%2Fja00202a071
  34. Y. Ohki; S. Ohta; K. Tatsumi (2010). "Bio-Inspired Iron and Nickel Complexes". Monomeric Iron(II) Complexes Having Two Sterically Hindered Arylthiolates. Inorg. Synth.. 35. pp. 137. doi:10.1002/9780470651568.ch7. ISBN 978-0-470-65156-8.  https://dx.doi.org/10.1002%2F9780470651568.ch7
  35. Ohki, Yasuhiro; Shimizu, Yuki; Araake, Ryoichi; Tada, Mizuki; Sameera, W. M. C.; Ito, Jun-Ichi; Nishiyama, Hisao (2016-12-19). "Co 6 H 8 (P i Pr 3 ) 6 : A Cobalt Octahedron with Face-Capping Hydrides" (in en). Angewandte Chemie International Edition 55 (51): 15821–15825. doi:10.1002/anie.201608262. PMID 27862749.  https://dx.doi.org/10.1002%2Fanie.201608262
  36. H. Bürger; U. Wannagat (1963). "Silylamido-Derivate von Eisen und Kobalt". Monatshefte für Chemie 94 (6): 1007–1012. doi:10.1007/BF00905688.  https://dx.doi.org/10.1007%2FBF00905688
  37. Faust, Michelle; Bryan, Aimee M.; Mansikkamäki, Akseli; Vasko, Petra; Olmstead, Marilyn M.; Tuononen, Heikki M.; Grandjean, Fernande; Long, Gary J. et al. (2015-10-26). "The Instability of Ni 2 : A Fifty Year Old Transition Metal Silylamide Mystery" (in en). Angewandte Chemie International Edition 54 (44): 12914–12917. doi:10.1002/anie.201505518. PMID 26332337. http://urn.fi/URN:NBN:fi:jyu-201511253814. 
  38. Schuetz, Steven A.; Day, Victor W.; Sommer, Roger D.; Rheingold, Arnold L.; Belot, John A. (2001). "Anhydrous Lanthanide Schiff Base Complexes and Their Preparation Using Lanthanide Triflate Derived Amides". Inorg. Chem. 40 (20): 5292–5295. doi:10.1021/ic010060l. PMID 11559096.  https://dx.doi.org/10.1021%2Fic010060l
  39. Bradley, Donald C.; Ghotra, Joginder S.; Hart, F. Alan (1973). "Low co-ordination numbers in lanthanide and actinide compounds. Part I. The preparation and characterization of trislanthanides". Journal of the Chemical Society, Dalton Transactions (10): 1021–1023. doi:10.1039/DT9730001021. http://pubs.rsc.org/en/content/articlelanding/1973/dt/dt9730001021. 
  40. Herrmann, Wolfgang A.; Anwander, Reiner; Kleine, Matthias; Scherer, Wolfgang (1992). "Lanthanoiden-Komplexe, I Solvensfreie Alkoxid-Komplexe des Neodyms und Dysprosiums. Kristall- und Molekülstruktur von trans-Bis(acetonitril)tris(tri-tert-butylmethoxy)neodym". Chem. Ber. 125 (9): 1971–1979. doi:10.1002/cber.19921250902.  https://dx.doi.org/10.1002%2Fcber.19921250902
  41. Andersen, Richard A. (1979). "Tris((hexamethyldisilyl)amido)uranium(III): Preparation and Coordination Chemistry". Inorganic Chemistry 18 (6): 1507–1509. doi:10.1021/ic50196a021.  https://dx.doi.org/10.1021%2Fic50196a021
  42. Avens, Larry R.; Bott, Simon G.; Clark, David L.; Sattelberger, Alfred P.; Watkin, John G.; Zwick, Bill D. (1993). "A Convenient Entry into Trivalent Actinide Chemistry: Synthesis and Characterization of AnI3(THF)4 and An[N(SiMe3)2]3 (An = U, Np, Pu)". Inorganic Chemistry 33 (10): 2248–2256. doi:10.1021/ic00088a030.  https://dx.doi.org/10.1021%2Fic00088a030
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/)
ScholarVision Creations
Feedback