Internet of Things: Comparison
View Latest Version
Please note this is a comparison between Version 6 by Faizan Qamar and Version 5 by Faizan Qamar.

The key features required for employing a large-scale IoT are low-cost sensors, highspeed and error-tolerant data communications, smart computations, and numerous applications. This research work is presented in four main sections, including a general overview of IoT technology, a summary of previous correlated surveys, a review regarding the main IoT applications, and a section on the challenges of IoT. The purpose of this study is to fully cover the applications of IoT, including healthcare, environmental, commercial, industrial, smart cities, and infrastructural applications. This work explains the concept of IoT and defines and summarizes its main technologies and uses, offering a next-generation protocol as a solution to the challenges.

  • 6G
  • spectrum management
  • 5G
  • Carrier Aggregation (CA)
  • Cognitive Radio (CR)
  • small cell
  • high-spectrum access
  • mmWave
  • M-MIMO

1. Introduction

Large-scale IoT intelligent systems have become more efficient and effective by using the properties of “symmetry” and “asymmetry”. This can help in a range of IoT applications, for example, in water quality analytics, bee colony status monitoring, accurate agriculture, data communication balancing, smart traffic management, spatiotemporal predicting, and intelligent engineering. Several studies are currently working on IoT technologies to sustain their necessity in platforms developing technology [3]. Although there are diverse definitions and explanations for understanding IoT, it has a subsequent edge associated with the assimilation of the physical world with the virtual one of the internet [4].

The paradigm of IoT is simplified as any-time, any-place, and any-one connected [5]. The implementation of this technology makes things and people closer and everyday life easier [6]. The purpose of IoT is to ensure a connection between devices, where each provides information and data. These devices are generally personal objects that are frequently carried, including smartphones, vehicles, healthcare devices, and office connected devices [7]. Moreover, Radio-Frequency Identification (RFID) is considered to be one of the first applications that saw the light and has played a crucial role in numerous technologies, such as sensors, smart objects, and actuators [8]. However, Machine-to-Machine communication (M2M) [9] and Vehicle-to-Vehicle communication (V2V) [10] represent the actual applications showing the significant advantages of IoT [11][12].

2. IoT Applications

Figure 3 represents a complete taxonomy of IoT in the significant fields of application. The principal areas of application are focused on health care, the environment, smart cities, commercial, industrial, and infrastructural fields [13][14].

Figure 3. Taxonomy of IoT applications.

The applications and use of IoT in the different domains are what drive and explain the development of this new trend, leading to the acceptance of IoT by the new world [15]. The study of IoT applications improves the understanding and enhancement of IoT technology, and thus, the design of new systems for newly developed cases [16]. The concept of IoT can be summarized as generating daily information from an object and transferring it to another one. Therefore, enabling communication between objects makes the range of IoT applications extensive, variable, and unlimited [17][18].

Table 3. IoT healthcare applications.

Reference Focus Area Application Protocol Device
[19] Disease management system to improve reliability A guide for IoT healthcare service providers - Independent hand-held device and smartphones
[20] Healthcare monitoring for chronic diseases like depression and diabetes Battery energy efficiency approach using a machine learning technique - Wearable devices
[21] Healthcare monitoring system which uses low-cost sensors and ensures a lower energy consumption New architecture and paradigm of monitoring XMPP Smartphone
[22] Mobile medical home monitoring system to improve the rapidity of factor measurements and ensure a low energy consumption A new paradigm for mobile medical home monitoring - Wearable device
[23] Adaptive security management based on metrics to enhance security Adaptive security management standard - Boy sensors
[24] Synthesis method for e-health to ensure high availability A new structure for e-health   In connection with the patient’s body
[25] IEEE 802.15.4 transceiver with a low error rate and a higher probability Framework IEEE 802.15.4 Wearable device
[26] An efficient protocol to counter PUEA attacks Algorithm and structure protocol Multi-tier device-based authentication protocol -
[27] Biotelemetry application to ensure lower costs and energy consumption Implementation and algorithm - Wearable antennas
[28] Energy-efficient routing protocol to ensure a lower energy consumption The path routing protocol in WSN -
[29] Super-resolution algorithm for healthcare images with slower response time and cost - Multi-kernel SVR learning-based image super-resolution
[30] Healthcare monitoring system with lower delay rate and time response A new algorithm for healthcare monitoring system NB-IoT -
[31] Human factor evaluation in information exchange in the healthcare environment It promotes data exchange among healthcare staff and healthcare providers - EPR system in hospital emergency department
[32] Healthcare managing system developed through MySignals following LoRa wireless network Collecting human body data LoRa Biosensors attached to the body
[33] Focusing on chronic conditions beyond the office visit Iraqi health information system - Wearable sensors

Table 4. IoT environmental applications.

Reference Focus Area Application Protocol Device
[34] Monitor and control many environmental factors of henhouses in chicken farms Henhouse system MAC Protocol Smart devices
[35] IoT ecological monitoring system A prototype for wild vegetation environment monitoring - Wireless sensor network
[36] The revival of a rural hydrological/water monitoring system Link located in Tasik Chini LoRaWAN

TCP/IP		 Cellular BS and PC
[37] Design and modeling of a sensible home automation system Smart home RFID Smart home system
[38] A model for smart disaster management using ICT Smart cities - -
[39] Identify critical challenges in ozone mitigation Department of Environment Malaysia - -
[40] Development of a Greenhouse Gases monitoring system Remote area - NetDuino 3 WIFI

Table 5. IoT smart city applications.

Reference Focus Area Application Protocol Device
[41] Semantic-aware mobile crowd-sensing Service composition in smart city Cellular Smartphone and laptop
[42] Digital forensics
  • Smart cities
  • Smart homes
  • Wearables smart grids
[43] Location finding along with the updated location configuration features
  • Emergency informing
  • Dog tracking
  • Monitoring indoor conditions
 LoRa Sensor device inside an ‘umbrella tube’
[44] Big Data processing Smart home Bluetooth low energy (BLE) MapReduce
[45] Analyze and predict the performance of applications used in scalable platforms Smart home LoRa Remote device and server
[46] Context-aware service composition Smart home wEASEL Smartphone
[47] Cloud computing service composition Vehicular monitoring OIDM2M
[48] QoS service composition Smart home Bayesian networks Smart devices
[49] Manage heterogeneous data streams Weather systems ITS
[50][51] Traffic management and dynamic resource caching management Street parking system CoAP WSN Devices
[52] Real-time low power routing protocol Smart city RPL
[53] Fog-based architecture to manage IoT applications 3G/4G Cellular

WiFi

ZigBee

Table 6. IoT commercial applications.

Reference Focus Area Application Protocol Device
[54] QoS-aware service composition Ecosystem SoA Smart devices
[55] Semantic-aware service composition Smart homes

Smart devices		 6LoWPAN

CoAP		 Smart objects
[56] QoS-aware multi-objective service composition Composite service

Optimization service		 - -
[57] QoS-aware service composition Optimization service IP -
[58] QoS-aware multi-agent composition Web services XMPP -
[59] Service accuracy IoT Mashup application RTM and FM IoT sensors
[60][61] Finance data flow system Financial and banking sector NFC -
[62] Etherum BC Smart grid BC -

Table 7. IoT industrial applications.

Reference Focus Area Application Protocol Device
[63] QoS-aware scheduling for service-oriented IoT devices Scheduling if IoT WSN Mobile devices
[64] Automatic learning of energy profiles and enhancing platform strategy IoT Fog application - -
[65] Content-based cross-layer scheduling Industrial plant IEEE 802.15.4-2015 TSCH MAC -
[66] Nonbeacon-enabled personal area network Industrial monitoring and automation IEEE 802.15.4-2015 -
[67] Ultra-low-power robust cell Electronics industry - TFET SRAM
[68] Concept of prognostics and systems health management (PHM) Medical industry - Smart object appliance
[69] The idea of Industrial IoT (IIoT) focusing on Low-Power Wide-Area Networks (LPWANs) The indoor industrial monitoring system LoRaWAN SF 7

LoRaWAN Fair Mod.

IEEE 802.15.4		 Industrial sensors
[70] Industrial Blockchain Tokenizer (IBT) technology Industrial robot security Ad-hoc Haye Sensors

Table 8. IoT infrastructural applications.

Reference Focus Area Application Protocol Device
[71] SDN allocation method and IoT/fog Very low and predictable latency applications Openflow Smart devices
[72] Energy-efficient resource management
  • Industry 4.0
  • Internet of energy
  • Big data streaming
  • Vehicular mobility
  • Smart city
 TCP/IP

5G		 Smart devices
[73] Resource-efficient edge computing
  • Flying ad hoc networks for precision agriculture
  • E-health
  • Smart homes
 Cellular Intelligent IoT device
[74] Compressed sensing based on reakness for IoT applications
  • IoT scenarios consisting of local WSN
 - -
[75] Energy-efficient saving rectifier circuits
  • Energy harvesting
  • Biomedical applications
 Bluetooth/WLAN -
[76] Low complexity parity checking Wireless sensor networks -
  • Wearable devices
  • Smart sensors
  • Smartphones
[77] QoS-independent and dynamic management M2M Cellular 3G and 4G PC and smartphone
[78] Software update management Pervasive IoT applications CoAP -
[79] Hazard-oriented analysis and implementation Hazard-centric IoT application - -
[80] Mobile broadband resource allocation in Fog networks Mobile broadband Cellular Smartphones
[81] WSDN management system
  • Device management
  • Network management
 IEEE.802.15.4

IEEE 802.11		 -

3. Future Research Challenges

For future research directions, we present some of the challenges in current 5G networks that need optimum solutions for designing 6G networks. The future research challenges for the studied topics are summarized as follows:

A. Carrier Aggregation

An optimal SS framework to allocate multiple resources efficiently among users is crucial for our future SS systems [237]. Multiple CCs across the available spectrum can be utilized to create a wider bandwidth channel to increase the network data throughput and overall capacity [238]. Moreover, an application-aware resource allocation scheme is needed for the users of HetNet to achieve fragmented spectrum allocations and aggregate licensed and unlicensed carrier spectra [239]. A Clear Channel Assessment (CCA) may be performed in response to the uplink grant to determine the availability of an unlicensed spectrum [240]. Moreover, the Licensed Assisted Access (LAA) method is the latest approach presented by 3GPP that can exploit high-spectrum bandwidth to address the limitation of the current 5G network [241]. Various Machine Learning (ML)-based resource allocation techniques can also be applied. For instance, a deep learning method can be used to overcome the resource allocation management of BS by performing fractional spectrum access proactively and selecting the channel dynamically [242]. Lack of dynamic control of wireless network resources leads to unbalanced spectrum loads and introduces capacity bottleneck. Therefore, a solution similar to extended Dynamic Spectrum Access (eDSA) is needed to provide quality load balancing in available spectrum bands, traffic allocation, and capacity enhancement through the aggregation of current resources [243]. Moreover, some AI-based solutions for resource management must be proposed; for example, Evolutionary Programming (EP) algorithm [244].

B. Cognitive Radio

CR for spectrum utilization offers the opportunity for flexible spectrum access in the current wireless systems [245]. Spectrum sensing involves the classification of a part of the spectrum or a frequency band as either “occupied” or “unoccupied” [246]. Several types of CR-based schemes are presented recently (e.g., matched filter, energy, and cyclostationary feature detection) [247]. When more accurate information about the primary user is needed, then the best-matched filter is required to perform optimal detection [248]. The cyclostationary approach can also be utilized by using cyclostationary elements of the available spectrum [249]. Moreover, the implementation of cooperative sensing must be performed in a distributed manner; that is, SUs receive information from the neighbors and make a choice on an individual basis [250]. Another way to use the free spectrum efficiently is the utilization of the dynamic genetic algorithm for PUs and SUs [251]. A new promising approach is to utilize ML techniques with CR to improve the spectral and energy efficiency of the network [252]. The handover between the PUs and SUs during resource sharing is a critical task that needs some dynamic handover schemes to achieve high QoS [253]. Moreover, various AI-based approaches are required for effective resource management in CR networks [254]. Although this requires different optimization parameters for different environments, real-time processing can be achieved by combining CR with AI into the Multi-Agent System (MAS), and real-time processing can be achieved [255].

C. Small Cell

As the use of a high-frequency band in the current 5G network increases, the utilization of small cell deployment is a mandatory approach to serve a higher number of subscribers [256]. However, the existing spectrum allocation algorithms are insufficient to deliver optimum spectrum allocation efficiency in the small cell network [257]. Therefore, an efficient algorithm, such as K-Nearest Neighbor (KNN) learning algorithm, can be used to classify all the small cells according to their geographic locations and interference radius; thus, the spectrum allocation efficiency can be improved [258]. Additionally, for a limited backhaul capacity network, some efficient spectrum allocation solution is required to provide significant performance improvement in throughput enhancement, delay reduction, and energy savings for small-cell networks [259]. The switching between small cells and Wi-Fi remains a challenging task that is being explored in the latest 3GPP releases [260]. Furthermore, in small cell-based HetNet, which consists of multilayers with a shared spectrum, a dynamic spectrum and multicell logarithmic resource allocation algorithm are required [261]. The utilization of various new approaches, such as block-aware power allocation, efficient relay selection, and cooperative caching algorithms, must also be developed to deliver the optimum results for the current 5G network [262,263]. The BS in HetNet is experiencing a seamless switching between different technologies, such as Wi-Fi and cellular. This continuous switching makes the network suffer from negative parameters, such as intercell interference, SNR, fading, and downstream power. Hence, an optimal solution for resource and power allocation using a feed-forward neural network approach can be implemented for the stability of the network [264]. Similarly, traffic offloading is a critical issue in multitier HetNet; therefore, an autonomous traffic offloading technique based on machine learning is required to reduce transmission delay [265]. Moreover, an efficient design for some new AI-based clustering approach can manage the resource framework while enhancing the efficiency and throughput of the small cell [266]. To improve coverage, AI-based optimization approaches are required, especially for software-defined networking controllers [267].

D. High-Spectrum Access

The modeling, as well as the measure of high-spectrum channels, play a vital role in guiding toward the complete knowledge of how this spectrum differs from the currently used spectrum [268]. Limited coverage is another big issue for the mmWave spectrum; therefore, detailed stochastic geometric coverage analysis studies with the realistic channel and antenna radiation models are required [269,270]. Moreover, the use of passive reflectors of different shapes and sizes can help enhance the received power, thus improving signal coverage in the NLOS region [271]. Besides, NLOS is assumed to be more important for a lower 6 GHz band rather than in mmWave communication links. On the contrary, high propagation losses and high absorption in mmWave makes the LOS inevitable [272]. However, only a few research studies have focused on designing the channel models for the NLOS scenario to deliver sufficient results [273,274]. Although existing channel models provide some insights into the propagation characteristics of mmWave in cellular environments, further research is needed to capture the shades of the propagation and fade in the mmWave scenario [275]. The utilization of clustering in narrow-beam antenna [276] and accurate estimation of departure and arrival angles, as well as the time-of-arrival for each observed radio propagation path, can be used to enhance the overall network performance [277]. Various new frequency spectra, such as 60 and 73 GHz bands, can be studied for various propagation environments and compared with the existing frequency band below 6 GHz. Different multifrequency propagation path loss models (in particular, ABG, which is CIF) can be investigated for the evaluation of future high-frequency mmWave networks [278]. Furthermore, some new self-organizing techniques based on ML are required to provide clustering and efficient spectrum allocation for the mmWave system [279]. Moreover, the beam selection for the uplink scenario requires an efficient ML mechanism to deliver a high directional beamforming effect [280]. The AI-based framework can also be used to optimize high-spectrum mmWave compressed sensing for high-speed 5G/6G image transmission [281].

E.  M-MIMO

In mmWave frequency bands, the blockage and path loss phenomena are considerably high. Nonetheless, it can be (partially) surmounted by keeping the structure of antenna array on the basic physical size as it is used in lower frequencies; this can be accomplished by M-MIMO [282]. However, M-MIMO technologies are constructed, implemented, and utilized differently [283]. The main requirements regarding stability, flexibility, and coverage must be investigated for different frequency bands, antenna geometries, and propagation environments [284]. Besides, various current precoding schemes have high-computational complexity and fail to maximize spatial information [224]. Conventional digital beamforming involves the complexity of large antenna arrays in addition to the increased cost of the system, whereas analog beamforming can handle only a single data signal at a time. Therefore, various low-cost and less complex hybrid precoding methods are required to model efficient transmitters and testbeds to mitigate jamming for MIMO-based mmWave systems [285–289]. This goal can be achieved by designing architecture with a combination of analog and digital processing that can be utilized to enable beamforming and spatial multiplexing with minimum complexity in achieving optimal performance [290,291]. An ML algorithm can be utilized to predict various channel characteristics and create a beamforming M-MIMO dataset framework [292,293]. The AI-and M-MIMO-based systems can deliver good QoS performance for high altitude users [294]. Nonetheless, the explainable AI-controlled based architecture would be useful for several current limitations while performing resource allocation, energy optimization, and minimizing interferences [295].

4. Conclusions

Various challenges have been summarized: Such as data privacy and scalability for the healthcare applications, authorization and cost issues for environmental applications, mobility and architecture challenges for smart city applications, cost and implementation difficulties for commercial applications, hardware and production problems for industrial applications, and standardization and trust issues for infrastructural applications. It has stated that various IoT applications still need to be exploited, such as blockchain technology, in order to maintain transaction information, enhance the existing structure performance, or develop next-generation systems. This can help to achieve extra safety, automatic business management, distributed platforms, offline-to-online information authentication, and so on. Moreover, the security and privacy characteristics of IoT are the key factors that can lead to its ability to be developed into a universally implemented technology in the future. However, the self-organizing and accessible nature of IoT makes it susceptible to numerous insider and outsider attackers. This may compromise the users’ security and privacy, enabling access to a user’s private data, financial damage, and eavesdropping. Therefore, more advanced optimized algorithms and protocols are required to secure data privacy. It can be concluded that by designing an energy- and cost-efficient intelligent network with potential business growth for IoT systems, the next generation of development technology can be produced.

References

  1. Mohd Zaki, I.; Rosilah, H. The Implementation of Internet of Things using Test Bed in the UKMnet Environment. Asia Pac. J. Inf. Technol. Multimed. 2019, 8, 1–17.
  2. Hassan, R.; Nori, S.S.; Othman, N.E. The improvement of the protection for 6LoWPAN in IoT through non-causal hash function scheme. In Proceedings of the 2018 15th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON), Chiang Rai, Thailand, 18–21 July 2018; pp. 600–603.
  3. Whitmore, A.; Agarwal, A.; Da Xu, L. The Internet of Things—A survey of topics and trends. Inf. Syst. Front. 2015, 17, 261–274.
  4. Ali, Z.M.; Arshad, M.A.B.M.; Bakar, M.A. POLIoT: Internet Of Things Framework In Managing Network Threats At Metro Polytechnic Tasek Gelugor. In Proceedings of the 2018 Cyber Resilience Conference (CRC), Putrajaya, Malaysia, 13–15 November 2018; pp. 1–4.
  5. Jain, P.; Adrangi, F.; Venkatachalam, M. Cellular IoT Network Architecture. Google Patents US 10,623,942 B2, 14 April 2020.
  6. Korade, S.; Kotak, V.; Durafe, A. A review paper on internet of things (IoT) and its applications. Int. Res. J. Eng. Technol. 2019, 6, 1623–1630.
  7. Wu, F.; Wu, T.; Yuce, M.R. An internet-of-things (IoT) network system for connected safety and health monitoring applications. Sensors 2019, 19, 21.
  8. Pungus, S.R.; Yahaya, J.; Deraman, A.; Bakar, N.H.B. A data modeling conceptual framework for ubiquitous computing based on context awareness. Int. J. Electr. Comput. Eng. 2019, 9, 5495–5501.
  9. Alsharif, M.H.; Nordin, R.; Abdullah, N.F.; Kelechi, A.H. How to make key 5G wireless technologies environmental friendly: A review. Trans. Emerg. Telecommun. Technol. 2018, 29, e3254.
  10. Zhang, H.; Lu, X. Vehicle communication network in intelligent transportation system based on internet of things. Comput. Commun. 2020, 160, 799–806.
  11. Udoh, I.S.; Kotonya, G. Developing IoT applications: Challenges and frameworks. IET Cyber Phys. Syst. Theory Appl. 2018, 3, 65–72.
  12. Afzal, B.; Umair, M.; Shah, G.A.; Ahmed, E. Enabling IoT platforms for social IoT applications: Vision, feature mapping, and challenges. Future Gener. Comput. Syst. 2019, 92, 718–731.
  13. Souri, A.; Asghari, P.; Rezaei, R. Software as a service based CRM providers in the cloud computing: Challenges and technical issues. J. Serv. Sci. Res. 2017, 9, 219–237.
  14. Souri, A.; Rahmani, A.M.; Jafari Navimipour, N. Formal verification approaches in the web service composition: A comprehensive analysis of the current challenges for future research. Int. J. Commun. Syst. 2018, 31, e3808.
  15. Chettri, L.; Bera, R. A comprehensive survey on Internet of Things (IoT) toward 5G wireless systems. IEEE Internet Things J. 2019, 7, 16–32.
  16. Tun, S.Y.Y.; Madanian, S.; Mirza, F. Internet of things (IoT) applications for elderly care: A reflective review. Aging Clin. Exp. Res. 2020.
  17. Redhu, S.; Maheshwari, M.; Yeotikar, K.; Hegde, R.M. Joint Data Latency and Packet Loss Optimization for Relay-Node Selection in Time-Varying IoT Networks. In Proceedings of the 24th Annual International Conference on Mobile Computing and Networking, New Delhi, India, 29 October–2 November 2018; pp. 711–713.
  18. De Almeida, I.B.F.; Mendes, L.L.; Rodrigues, J.J.; da Cruz, M.A. 5G waveforms for IoT applications. IEEE Commun. Surv. Tutor. 2019, 21, 2554–2567.
  19. Kim, S.; Kim, S. User preference for an IoT healthcare application for lifestyle disease management. Telecommun. Policy 2018, 42, 304–314.
  20. Fafoutis, X.; Clare, L.; Grabham, N.; Beeby, S.; Stark, B.; Piechocki, R.; Craddock, I. Energy neutral activity monitoring: Wearables powered by smart inductive charging surfaces. In Proceedings of the 2016 13th Annual IEEE International Conference on Sensing, Communication, and Networking (SECON), London, UK, 27–30 June 2006; pp. 1–9.
  21. Jimenez, F.; Torres, R. Building an IoT-aware healthcare monitoring system. In Proceedings of the 2015 34th International Conference of the Chilean Computer Science Society (SCCC), Santiago, Chile, 9–13 November 2015; pp. 1–4.
  22. Ding, Y.; Gang, S.; Hong, J. The design of home monitoring system by remote mobile medical. In Proceedings of the 2015 7th International Conference on Information Technology in Medicine and Education (ITME), Huangshan, China, 13–15 November 2015; pp. 278–281.
  23. Atlam, H.F.; Wills, G.B. IoT security, privacy, safety and ethics. In Digital Twin Technologies and Smart Cities; Springer: Cham, Switzerland, 2020; pp. 123–149.
  24. Baloch, Z.; Shaikh, F.K.; Unar, M.A. A context-aware data fusion approach for health-IoT. Int. J. Inf. Technol. 2018, 10, 241–245.
  25. Subrahmanyam, V.; Zubair, M.A.; Kumar, A.; Rajalakshmi, P. A low power minimal error IEEE 802.15. 4 Transceiver for heart monitoring in IoT applications. Wirel. Pers. Commun. 2018, 100, 611–629.
  26. Lin, S.C.; Wen, C.Y.; Sethares, W.A. Two-tier device-based authentication protocol against PUEA attacks for IoT applications. IEEE Trans. Signal Inf. Process. Over Netw. 2017, 4, 33–47.
  27. Damis, H.A.; Khalid, N.; Mirzavand, R.; Chung, H.J.; Mousavi, P. Investigation of epidermal loop antennas for biotelemetry IoT applications. IEEE Access 2018, 6, 15806–15815.
  28. Elappila, M.; Chinara, S.; Parhi, D.R. Survivable path routing in WSN for IoT applications. Pervasive Mob. Comput. 2018, 43, 49–63.
  29. Jebadurai, J.; Peter, J.D. Super-resolution of retinal images using multi-kernel SVR for IoT healthcare applications. Future Gener. Comput. Syst. 2018, 83, 338–346.
  30. Malik, H.; Alam, M.M.; Le Moullec, Y.; Kuusik, A. NarrowBand-IoT performance analysis for healthcare applications. Procedia Comput. Sci. 2018, 130, 1077–1083.
  31. Hamdan, R. Human factors for IoT services utilization for health information exchange. J. Theor. Appl. Inf. Technol. 2018, 96, 2095–2105.
  32. Shahidul Islam, M.; Islam, M.T.; Almutairi, A.F.; Beng, G.K.; Misran, N.; Amin, N. Monitoring of the human body signal through the Internet of Things (IoT) based LoRa wireless network system. Appl. Sci. 2019, 9, 1884.
  33. Dauwed, M.A.; Yahaya, J.; Mansor, Z.; Hamdan, A.R. Determinants of internet of things services utilization in health information exchange. J. Eng. Appl. Sci. 2018, 13, 10490–10501.
  34. Li, H.; Wang, H.; Yin, W.; Li, Y.; Qian, Y.; Hu, F. Development of a remote monitoring system for henhouse environment based on IoT technology. Future Internet 2015, 7, 329–341.
  35. Kim, N.S.; Lee, K.; Ryu, J.H. Study on IoT based wild vegetation community ecological monitoring system. In Proceedings of the 2015 Seventh International Conference on Ubiquitous and Future Networks, Sapporo, Japan, 7–10 July 2015; pp. 311–316.
  36. Nordin, R.; Mohamad, H.; Behjati, M.; Kelechi, A.H.; Ramli, N.; Ishizu, K.; Kojima, F.; Ismail, M.; Idris, M. The world-first deployment of narrowband IoT for rural hydrological monitoring in UNESCO biosphere environment. In Proceedings of the 2017 IEEE 4th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), Putrajaya, Malaysia, 28–30 November 2017; pp. 1–5.
  37. Yuen, M.C.; Chu, S.Y.; Hong Chu, W.; Shuen Cheng, H.; Lam Ng, H.; Pang Yuen, S. A low-cost IoT smart home system. Int. J. Eng. Technol. 2018, 7, 3143–3147.
  38. Sukmaningsih, D.W.; Suparta, W.; Trisetyarso, A.; Abbas, B.S.; Kang, C.H. Proposing Smart Disaster Management in Urban Area. In Proceedings of the Asian Conference on Intelligent Information and Database Systems, Yogyakarta, Indonesia, 8–11 April 2019; pp. 3–16.
  39. Ahamad, F.; Latif, M.; Yusoff, M.; Khan, M.; Juneng, L. So near yet so different: Surface ozone at three sites in Malaysia. EES 2019, 228, 012024.
  40. Suparta, W.; Alhasa, K.M.; Singh, M.S.J. Preliminary Development of Greenhouse Gases System Data Logger Using Microcontroller Netduino. Adv. Sci. Lett. 2017, 23, 1398–1402.
  41. Montori, F.; Bedogni, L.; Bononi, L. A collaborative internet of things architecture for smart cities and environmental monitoring. IEEE Internet Things J. 2017, 5, 592–605.
  42. Zia, T.; Liu, P.; Han, W. Application-specific digital forensics investigative model in internet of things (iot). In Proceedings of the 12th International Conference on Availability, Reliability and Security, Reggio Calabria, Italy, 29 August–1 September 2017; pp. 1–7.
  43. Lin, Y.B.; Lin, Y.W.; Hsiao, C.Y.; Wang, S.Y. Location-based IoT applications on campus: The IoTtalk approach. Pervasive Mob. Comput. 2017, 40, 660–673.
  44. Zeng, X.; Garg, S.K.; Strazdins, P.; Jayaraman, P.P.; Georgakopoulos, D.; Ranjan, R. IOTSim: A simulator for analysing IoT applications. J. Syst. Archit. 2017, 72, 93–107.
  45. Chen, S.; Liu, B.; Chen, X.; Zhang, Y.; Huang, G. Framework for adaptive computation offloading in iot applications. In Proceedings of the 9th Asia-Pacific Symposium on Internetware, Shanghai, China, 23 September 2017; pp. 1–6.
  46. Urbieta, A.; González-Beltrán, A.; Mokhtar, S.B.; Hossain, M.A.; Capra, L. Adaptive and context-aware service composition for IoT-based smart cities. Future Gener. Comput. Syst. 2017, 76, 262–274.
  47. Seo, D.; Jeon, Y.B.; Lee, S.H.; Lee, K.H. Cloud computing for ubiquitous computing on M2M and IoT environment mobile application. Clust. Comput. 2016, 19, 1001–1013.
  48. Lee, C.; Wang, C.; Kim, E.; Helal, S. Blueprint flow: A declarative service composition framework for cloud applications. IEEE Access 2017, 5, 17634–17643.
  49. Akbar, A.; Kousiouris, G.; Pervaiz, H.; Sancho, J.; Ta-Shma, P.; Carrez, F.; Moessner, K. Real-time probabilistic data fusion for large-scale IoT applications. IEEE Access 2018, 6, 10015–10027.
  50. Sun, X.; Ansari, N. Traffic load balancing among brokers at the IoT application layer. IEEE Trans. Netw. Serv. Manag. 2017, 15, 489–502.
  51. Sun, X.; Ansari, N. Dynamic resource caching in the IoT application layer for smart cities. IEEE Internet Things J. 2017, 5, 606–613.
  52. Krishna, G.G.; Krishna, G.; Bhalaji, N. Analysis of routing protocol for low-power and lossy networks in IoT real time applications. Procedia Comput. Sci. 2016, 87, 270–274.
  53. Naranjo, P.G.V.; Pooranian, Z.; Shojafar, M.; Conti, M.; Buyya, R. FOCAN: A Fog-supported smart city network architecture for management of applications in the Internet of Everything environments. J. Parallel Distrib. Comput. 2019, 132, 274–283.
  54. Alodib, M. QoS-Aware approach to monitor violations of SLAs in the IoT. J. Innov. Digit. Ecosyst. 2016, 3, 197–207.
  55. Han, S.N.; Crespi, N. Semantic service provisioning for smart objects: Integrating IoT applications into the web. Future Gener. Comput. Syst. 2017, 76, 180–197.
  56. Huo, Y.; Qiu, P.; Zhai, J.; Fan, D.; Peng, H. Multi-objective service composition model based on cost-effective optimization. Appl. Intell. 2018, 48, 651–669.
  57. Huo, L.; Wang, Z. Service composition instantiation based on cross-modified artificial Bee Colony algorithm. China Commun. 2016, 13, 233–244.
  58. Temglit, N.; Chibani, A.; Djouani, K.; Nacer, M.A. A distributed agent-based approach for optimal QoS selection in web of object choreography. IEEE Syst. J. 2017, 12, 1655–1666.
  59. Cao, B.; Liu, J.; Wen, Y.; Li, H.; Xiao, Q.; Chen, J. QoS-aware service recommendation based on relational topic model and factorization machines for IoT Mashup applications. J. Parallel Distrib. Comput. 2019, 132, 177–189.
  60. Cuomo, S.; Di Somma, V.; Sica, F. An application of the one-factor HullWhite model in an IoT financial scenario. Sustain. Cities Soc. 2018, 38, 18–20.
  61. Hull, J.; White, A. Numerical procedures for implementing term structure models I: Single-factor models. J. Deriv. 1994, 2, 7–16.
  62. Pustišek, M.; Kos, A. Approaches to front-end IoT application development for the ethereum blockchain. Procedia Comput. Sci. 2018, 129, 410–419.
  63. Li, L.; Li, S.; Zhao, S. QoS-aware scheduling of services-oriented internet of things. IEEE Trans. Ind. Inform. 2014, 10, 1497–1505.
  64. Venticinque, S.; Amato, A. A methodology for deployment of IoT application in fog. J. Ambient Intell. Humaniz. Comput. 2019, 10, 1955–1976.
  65. Jin, Y.; Raza, U.; Aijaz, A.; Sooriyabandara, M.; Gormus, S. Content centric cross-layer scheduling for industrial IoT applications using 6TiSCH. IEEE Access 2017, 6, 234–244.
  66. Kiran, M.S.; Rajalakshmi, P. Performance analysis of CSMA/CA and PCA for time critical industrial IoT applications. IEEE Trans. Ind. Inform. 2018, 14, 2281–2293.
  67. Ahmad, S.; Alam, N.; Hasan, M. Robust TFET SRAM cell for ultra-low power IoT applications. AEU Int. J. Electron. Commun. 2018, 89, 70–76.
  68. Kwon, D.; Hodkiewicz, M.R.; Fan, J.; Shibutani, T.; Pecht, M.G. IoT-based prognostics and systems health management for industrial applications. IEEE Access 2016, 4, 3659–3670.
  69. Luvisotto, M.; Tramarin, F.; Vangelista, L.; Vitturi, S. On the use of LoRaWAN for indoor industrial IoT applications. Wirel. Commun. Mob. Comput. 2018, 2018, 1–11.
  70. Mazzei, D.; Baldi, G.; Fantoni, G.; Montelisciani, G.; Pitasi, A.; Ricci, L.; Rizzello, L. A Blockchain Tokenizer for Industrial IOT trustless applications. Future Gener. Comput. Syst. 2020, 105, 432–445.
  71. Diro, A.A.; Reda, H.T.; Chilamkurti, N. Differential flow space allocation scheme in SDN based fog computing for IoT applications. J. Ambient Intell. Humaniz. Comput. 2018, 1–11.
  72. Naranjo, P.G.V.; Baccarelli, E.; Scarpiniti, M. Design and energy-efficient resource management of virtualized networked Fog architectures for the real-time support of IoT applications. J. Supercomput. 2018, 74, 2470–2507.
  73. Chen, X.; Shi, Q.; Yang, L.; Xu, J. ThriftyEdge: Resource-efficient edge computing for intelligent IoT applications. IEEE Netw. 2018, 32, 61–65.
  74. Mangia, M.; Pareschi, F.; Varma, R.; Rovatti, R.; Kovačević, J.; Setti, G. Rakeness-based compressed sensing of multiple-graph signals for IoT applications. IEEE Trans. Circuits Syst. II Express Briefs 2018, 65, 682–686.
  75. Taghadosi, M.; Albasha, L.; Quadir, N.A.; Rahama, Y.A.; Qaddoumi, N. High efficiency energy harvesters in 65nm CMOS process for autonomous IoT sensor applications. IEEE Access 2017, 6, 2397–2409.
  76. Alabady, S.A.; Salleh, M.F.M.; Al-Turjman, F. LCPC error correction code for IoT applications. Sustain. Cities Soc. 2018, 42, 663–673.
  77. Ouedraogo, C.A.; Medjiah, S.; Chassot, C.; Drira, K. Enhancing middleware-based IoT applications through run-time pluggable Qos management mechanisms. application to a oneM2M compliant IoT middleware. Procedia Comput. Sci. 2018, 130, 619–627.
  78. Kolomvatsos, K. An intelligent, uncertainty driven management scheme for software updates in pervasive IoT applications. Future Gener. Comput. Syst. 2018, 83, 116–131.
  79. Limonad, L.; Fournier, F.; Haber, D.; Mashkif, N. “Shields”: A Model for Hazard-Oriented Analysis and Implementation of IoT Applications. In Proceedings of the 2018 IEEE International Congress on Internet of Things (ICIOT), San Francisco, CA, USA, 2–7 July 2018; pp. 96–103.
  80. Abedin, S.F.; Alam, M.G.R.; Kazmi, S.A.; Tran, N.H.; Niyato, D.; Hong, C.S. Resource allocation for ultra-reliable and enhanced mobile broadband IoT applications in fog network. IEEE Trans. Commun. 2018, 67, 489–502.
  81. Bera, S.; Misra, S.; Roy, S.K.; Obaidat, M.S. Soft-WSN: Software-defined WSN management system for IoT applications. IEEE Syst. J. 2016, 12, 2074–2081.
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/)
Video Production Service
Feedback