2. STEPLand Framework
STEPLand is defined as an operation framework typical of LCS, and composed of four steps, moving from broader to narrower epistemological perspectives (
Figure 1):
Figure 1. A workflow from broader to narrower knowledge issues illustrating the STEPLand perspective. Source: own elaboration.
1.
LUCC patterns and dynamics. The main objective of the first step is LUCC assessment using, e.g., remote techniques and geo-spatial approaches, and answering, at least, the following questions: “What LUC are changing?”, “Where?”, “When?”.
2.
LUCC modeling. The main objective is to describe the core drivers of LUCC using qualitative or quantitative methods and answering the following questions: “Which causal factors are involved in LUC changes?”, “Why?”, “How?”.
3.
Assessment of socio-environmental consequences. The aim is to delineate and understand the socio-environmental consequences of LUCC using qualitative or quantitative methodologies, and explicitly considering landscape transformations and ecosystem service dynamics to answer the question: “And then?”.
4.
Compiling future scenarios. The goal of this last step is to establish future LUCC projections, answering questions such as “What happens if (…)?”.
2.1. LUCC Patterns and Dynamics
The first step of STEPLand includes a formal assessment and characterization of LUCC, mainly based on Earth Observation (EO) techniques, e.g., remote sensing (RS). EO and GIS data facilitate trans-sectoral research and provide a platform for integrating multiple information layers that may include ancillary (or validation) data
[14][15]. RS tools provide valuable multitemporal data for monitoring LUCC patterns and processes at different spatial scales (local, regional, national, continental, and global), and GIS techniques make it possible to analyze them explicitly
[16][17][18]. Spatial, spectral, and radiometric RS resolutions affect the size, condition, and precision of the explicit features to be discriminated in a landscape scene, whereas the temporal resolution of satellite imagery determines the intrinsic territorial, environmental, and socio-economic dynamics of local systems
[10][19][20][21]. Both dimensions represent large technical challenges. During the past 40 years, significant advances in sensor technologies have improved the spatial, spectral, radiometric, and temporal resolutions, and the coverage, of satellite imagery
[22]. The classification phase is the process of identifying spectral similarities in the multidimensional spectral space and linking them to LUC categories. This involves assigning pixels to different LUC classes identified in a given study. Diverse classification taxonomy options are now available but, traditionally, these have been divided according to the pixel technique used (per-pixel or sub-pixel), or according to the application of training samples (supervised methods or unsupervised methods), among others
[23][24][25].
Similarity in spectral reflectance properties of natural surfaces at a given moment often impedes consistent identification and mapping of a large range of LUC, such as agricultural crops or individual communities constituted by natural vegetation. Furthermore, the spectral response of many cover types varies throughout the year: LUC categories that appear similar in spring may become distinguishable at earlier or later stages of the annual cycle. Therefore, a multi-temporal approach based on large RS databases is more suitable for revealing the complex LUC patterns characteristic, for instance, of the Mediterranean Basin
[26][27][28]. In order to minimize the classification errors due to seasonal changes, an appropriate strategy is to select images from the same month or, at least, from the same season
[29][30]. After a classification is obtained, the next step is to assess the accuracy or how well a classification has worked. This assessment measures the correlation between satellite imagery classification and ground reference samples to quantify the overall agreement between RS classification (global accuracy and user and producer accuracy by categories) and ground truthing data
[31].
Once LUC maps are generated and tested, among the available change detection techniques, the most usual method is the post-classification or map-to-map comparison (i.e., a comparative analysis of independently produced LUC classifications from different dates) associated with a transition or change matrix
[32][33]. According to
[34], post-classification is an accurate procedure that bypasses the difficulties associated with analyzing images acquired at different times of the year or by different sensors, and thus delineating the nature of change
[35]. Nevertheless, this method has two well-known critical issues
[36][37]: first, misregistration of the polygon boundaries (locational inaccuracy) in the different classifications, and, therefore, the presence of border pixels with false positive or negative changes. With rasters, this is basically the consequence of non-matching pixels
[38]; with vector shapes, this problem is known as “sliver”, i.e., narrow polygons of uncertain interpretation
[39][40][41]. The second issue relates to problems derived from classification errors: a false positive change may be recorded when no change has taken place because a pixel in one map (or in both maps) is misclassified, or false negative changes, when no change is identified but a change has taken place in the field. Therefore, this approach requires a good accuracy level in both classification maps because the change map accuracy is the product of the accuracies of the individual classifications, and therefore, it is subject to error propagation
[42][43][44].
2.2. LUCC Modeling
Modeling is a process that provides a platform for encoding inferred (or deduced) relationships, thus allowing simulations and projections based on mathematical (algorithmic) specifications or procedures
[45]. LUCC modeling is a tool for supporting planners and policymakers in developing robust policies and decisions. At the same time, models can be used to provide an ex ante assessment of policies or serve as an early warning system for environmental impacts. Six conceptual dimensions are considered to be particularly important for carrying out LUCC modeling
[46]: (i) analysis level, (ii) cross-scale dynamics, (iii) driving forces, (iv) spatial interactions and neighborhood effects, (v) temporal dynamics, and (vi) level of data integration. In general terms, LUCC is often modeled as a function of a selection of socio-economic and biophysical variables acting as driving forces that shape land change
[2][47][48][49].
Modeling LUCC driving forces comprises a wide variety of methodological approaches, which can be classified in different ways. For instance,
[3] divided driving forces into three groups: socio-economic drivers, biophysical drivers, and land management variables;
[50] differentiated proximate causes, those actions that directly affect land use, such as wood extraction, from underlying causes, i.e., those “fundamental forces” that underpin the proximate causes, including demographic, economic, technological, institutional, and cultural factors
[51]. In general, Ref.
[52] identified five driving forces: (i) biophysical constraints and potentials, (ii) economic factors, (iii) social factors, (iv) spatial policies, and (v) spatial interactions and neighborhood characteristics. Others
[48][53][54] differentiated actors of change from driving forces. Actors are the decision-making and mediating agents, including individuals (e.g., farmers), households, neighborhoods, agencies (e.g., planning organizations), and institutions, whereas driving forces are the (sometimes materialized) expression of their decisions or acts, e.g., through laws, subsidies, or incentives
[55]. Moreover, Ref.
[53] provided a specific definition of the “spatial domain” as the institutional (and geographical) context where a given agent interacts with the landscape (e.g., countries, regions, prefectures/provinces, municipalities). Representation of the domain can be facilitated in a geographically explicit model using boundary maps or vector layers. The extent of the study area also influences the selection: larger areas imply a diversification of LUC contexts and may require analyzing a larger variety of driving forces. Therefore, the analysis scale (local, regional, national, or global) can produce a specific representation based on different driving forces. For instance, the presence of small ecologically valuable areas can be the main determinant of LUCC patterns at a local scale, whereas the distance from the market can be a more important factor at a regional scale
[46].
Specification and quantification of the intrinsic relationship between driving forces and LUCC are particularly important in model implementation. According to
[56], modelers should select the drivers or explanatory variables that are supposed to play an active role in land change. Even in automated approaches, input variables are selected based on expert knowledge, although data availability (e.g., the lack of data for some economic variables, such as land ownership, or, for earlier times, e.g., gross domestic product in 1850) is often a major limitation, as documented in
[57].
According to
[45], models used for LUCC analysis range from those oriented towards pattern description/recognition to those quantifying and interpreting dynamics. One study
[58] provided a more generalized classification, arguing that models can be static or dynamic, spatial or non-spatial, inductive or deductive, and/or agent-based or pattern-based (e.g., emulation of individual decision makers vs. inference of the underlying behavior derived from LUCC patterns). Models can use a large range of information (satellite imagery, official statistics, maps or field surveys, among others) often implemented in GIS and eventually combined in composite indicators. Actor-based, bottom-up models based on household surveys represent the land change agent explicitly by emulating individual decision makers through agent-based approaches. Land evaluation pattern-based top-down models use RS and census data to simulate LUCC through parameterized transition equations that convert land from one cover type to another
[59]. Finally, Ref.
[60] separated inductive pattern-based models from cellular automata approaches, sector-based economic models, spatially disaggregated economic approaches, and agent-based models.
Therefore, driving forces form a tangled system of interactions that affect multiple temporal and spatial levels, making it difficult to carry out adequate analyses and obtain representation systems. Combining data from the social and natural sciences is a particularly complicated task due to the different operational scales, the complexity in relating social science data to a specific geographic place, and the difficulty involved in integrating qualitative data, which is more common in social science, and less common in ecological disciplines
[47]. Moreover, driving forces—and not only LUCC—are also subject to changes, which influence the identification of representative study periods, and thus affects the model’s results
[61]. Precision of statistical methodologies and data availability are also important. As a summary, identification of LUCC drivers (sensu
[26]) implies (i) the clarification of latent relationships between landscape patterns and driving forces (explorative models), and (ii) the projection of future landscapes under different scenarios (predictive models).
Two of the main issues arising when socio-economic and biophysical variables are combined spatially, as a process of data integration or data equalization
[62][63][64] characteristic of STEPLand, are the different data formats and spatial scales. Socio-economic data are usually available from official statistics in tabular format at some administrative boundaries: neighborhoods, districts, census tracks, municipalities, regions, and countries, among others
[65][66]. By comparison, biophysical variables are mainly extracted from EO sources, from spatial interpolation techniques (e.g., exploiting point data derived from climate stations) or from other sources (e.g., rasterization of archive maps) having a specific pixel size
[67]. When the two types of data are combined, these issues may lead to a loss in spatial precision
[68], given the need to integrate data at one specific scale, namely, according to administrative boundaries (i.e., native vector file) or to lattices (i.e., raster file with a given pixel size). As socio-economic data are mostly available for administrative areas, an option is to convert biophysical data into class intervals and calculate the area (or percentage) occupied by each interval within the appropriate spatial (polygon) domain. For instance, Ref.
[69] adopted the area option, whereas
[70] calculated the proportion of three different intervals of slopes within each district, and adopted a similar solution for soil moisture. Another study
[71] clipped LUC data to the boundaries of each of the 25 watersheds considered in the study, and then calculated zonal statistics for each watershed to extract the relative proportions of each LUC type for subsequent use in statistical analyses. Another option is to calculate the mean value of cardinal variables per spatial (polygon) domain, thus producing a high generalization. It is also possible to assign central (median) or dominant (mode) values for each administrative area. This latter option is appropriate for discrete variables, such as soil type.
When the option is to work at a pixel size, the problem is the inverse, as it affects the socio-economic data: a rasterization is required in order to match the pixel size of biophysical variables and LUCC. The main issue in this case is whether a statistical analysis is applied because all the pixels included in the administrative boundary have the same socio-economic value, showing a maximum spatial autocorrelation, which leads to a violation of the assumption of independent residuals. To minimize this situation, a convenient “solution” is to apply a “reduced factor” through, for instance, a stratified random sampling at a lower number of pixels. This option was applied in
[72] using a “contraction factor” amounting to 10. Another option is “data generalization”, e.g., using a grid lattice having larger pixel sizes, which is representative of a lower spatial resolution; for example, in
[73], all the variables describing deforestation and the respective drivers of change were aggregated to 25 km grid cells.
2.3. Socio-Environmental Consequences
The third step of STEPLand takes the socio-environmental consequences of LUCC into account. For instance, LUCC may affect weather and climate variability by altering biophysical, biogeochemical, and energy exchange processes at local, regional, and global scales. Therefore, the consequences of these processes are scale-dependent because some of them affect the local environment (e.g., local water quality), whereas other impacts extend far beyond the location where they arise (e.g., carbon cycle, climate change). Because not all LUCCs have global effects, and LUCCs are not irreversible, there are several multi-directional impacts that can reinforce, mitigate, or offset multiple consequences, enriching the debate regarding on-site and off-site factors of change
[74][75].
One specific repercussion considered in this review is related to landscape, given its particular nature because it contributes significantly to well-being and quality of life. Quantification of spatio-temporal landscape dynamics and the underlying drivers is key for planning appropriate decisions in this field
[76]. Landscape metrics are common tools for measuring spatial changes in landscape composition and configuration, including fragmentation and diversity
[77]. From a STEPLand perspective, they can be applied to RS and GIS data and simultaneously used with LUCC models and statistical methods. There are several quantitative measures, for example, those in
[78], that can be used to assess landscape composition, such as the number of patches (patch richness) and uniformity and variety (evenness and diversity), and to assess the configuration or the spatial distribution of patches in the landscape (landscape pattern); these include patch shape, isolation, spread between classes (contagion), mean patch size, and density.
Another additional consequence considered in STEPLand is the impact on ecosystem services because, in recent years, these services have attracted the increasing attention of researchers, policymakers, and other stakeholders worldwide
[79]. The main reason for this is that, when land is used, society changes and modifies the quantity and quality of the provision of these services. According to
[80], supply and demand of ecosystem services can be assessed at, and transferred to, different spatial and temporal scales by linking LUCC (e.g., extracted from remote sensing) with other data (e.g., obtained from interviews). Their results reveal patterns of human activities over time and space, and the capacities of different ecosystems to provide ecosystem services under changing LUC. However, Ref.
[81] reviewed the “ecosystem services” concept and the various methods applied for mapping and assessing quantitative methods, and the significant problem of there not being a clear distinction between services, functions, and benefits.
2.4. Futures Scenarios
The last stage included in the STEPLand perspective corresponds to the simulation and prediction of future LUCC scenarios. This is a significant process for policy makers because it enables them to better anticipate actions, especially in the context of urban planning and the protection of natural land
[82]. A previous study
[83] provided a literature review of models applied to predict LUCC, including Markov chains (MCs), landscape models, CLUE-S models, cellular automata (CA), integration of Markov chains and cellular automata (MC-CA), and artificial neural networks. Markov chains, for instance, quantify LUCC probabilities between different states that are recorded in a transition matrix
[84]. This matrix is the result of cross-tabulation between satellite images derived from two sequential dates, adjusted by proportional error and translated into a set of probability images, one for each LUC category
[85][86]. In addition, CA models are one of the most relevant tools for understanding complex systems, particularly LUC patterns, given their intrinsic sensitivity to both spatial configuration and neighborhood relationships. The future state of the cells is determined by the current state of the cell itself and that of the neighborhood cells, following transition functions based on a set of rules. A variety of methods has been used for calculating transition rules in CA, such as logistic regression, multinomial logit, linear and geometric formulations, support vector machines, and, more recently, artificial neural networks
[87].