2. 3-Mercapto-Coumarin
By analyzing the synthesis of 3-mercapto-coumarin, researchwers found that the source of sulfur was a heterocyclic compound not an inorganic reagent. In addition, the coumarin was formed in situ from primary sources, which were salicylaldehydes.
Qiyi et al. reported the synthesis of 3-mercapto-coumarin (
4) from 2-hydroxybenzylidenerhodanine (
3). The latter was produced in situ from salicylaldehyde (
1) and 2-thioxothiazolidin-4-one (
2). The reaction proceeded to the final target by refluxing of compound
3 in diluted ethanolic sodium hydroxide solution (
Scheme 1)
[18].
Scheme 1.
The synthesis of 3-mercapto-coumarin (
4
). Reagents and conditions: (
a
) EtOH, reflux, TEA, 80% yield; (
b
) EtOH, NaOH, reflux, 88% yield.
In 2009, a green catalyst-free synthetic protocol for synthesizing varieties of the target 3-mercapto-coumarins was reported. In this protocol, refluxing of 2-methyl-2-phenyl-1,3-oxa-thiolan-5-one (
5) and salicylaldehyde derivatives in water afforded the formation of corresponding 3-mercapto-coumarins (
4) in excellent yields (82–97%) (
Scheme 2)
[22].
Scheme 2.
Catalyst-free conditions for the synthesis of 3-mercapto-coumarins (
4
): Reagents and conditions: water; reflux; 8–10 h; 8 outputs with 82–97% yield.
3. Reactivity of 3-Mercapto-Coumarin
3-Mercapto-coumarin (
4) contributed to the synthesis of many chain and fused compounds. Accordingly, the reaction of 3-mercapto-coumarin (
4) with some acrylonitriles and acrylates under the Michael addition condition created
S-acetonitrile
6a,
S-propanenitrile
6b,
S-ethayl acetate
6c, and
S-propanoate
6d coumarin derivatives, respectively (
Scheme 3)
[18]. On the other hand, Mannich reaction of 3-mercapto-coumarin (
4) with formaldehyde produced 3-hydroxy-methylthio-coumarin (
7). The latter reacted with diphenylamine to give the corresponding α-aminomethylated thioether (
8) (
Scheme 3)
[23].
Scheme 3. Michael addition and Mannich reaction of 3-mercapto-coumarins (4). Reagents and conditions: (a) water, NaOH 10%, 50–56 °C, 4–12 h, four outputs with 40–92% yield; (b) formaldehyde, ethanol; (c) diphenyl amine, AcOH.
In a Chinese patent (2016), the author disclosed a method to fabricate benzothiophene-2-carboxylic acid (
9) via a phase-transfer catalyst of 3-mercapto-coumarin (
4) under high-pressure, 0.8–1.2 MPa (
Scheme 4)
[24].
Scheme 4. Benzothiophen-2-carboxylic (9) acid via phase-transfer catalyst: Reagents and conditions: high-pressure vessel, 0.8–1.2 MPa; aq. KOH 37%; tetrabutyl ammonium hydroxide; 135 °C, 10 h; conc. HCl; 41.6% yield.
N-Acetyl-S-(3-coumarinyl)cysteine (
11), which could be isolated from rat urine
[25], was synthesized by the reaction of 3-mercapto-coumarin (
3) and
N-acetyl-3-chloro-
D,
L-alanine methyl ester (
10) (
Scheme 5)
[26].
Scheme 5.
Synthesis of
N
-acetyl-S-(3-coumarinyl)cysteine. Reagents and conditions: TEA, acetonitrile, N
2
, 4 h, stirring, 47% yield.
4. 4-Mercapto-Coumarin
The synthesis of 4-mercapto-coumarin by methods based on 4-hydroxycoumarin has already been discussed
[19][27][28][29][30][19,27,28,29,30].
In 1970, Peinhardt and Reppel allowed 4-hydroxycoumarin (
12) to react with phosphorus oxychloride to get 4-chlorocoumarin (
13). The latter, under reaction with potassium hydrosulfide in situ prepared from potassium hydroxide with methanol saturated with hydrogen sulfide (H
2S), gave the corresponding 4-mercapto-coumarin (
14) in a good yield, 90% (
Scheme 6)
[27].
Scheme 6. The synthesis of 4-mercapto-coumarin (14). Reagents and conditions: (a) POCl3, reflux, 2 h, 55% yield; (b) KSH generated from (KOH, MeOH saturated with H2S), reflux, 90% yield.
Recently, the synthesis of 4-mercapto-coumarin (
14) occupied the scope of interest of Ghosh’s work as an in situ transformed intermediate to synthesize different coumarin-fused heterocycles via 4-hydroxycoumarin (
12)
[19][28][29][30][19,28,29,30]. Dissolving the 4-hydroxycoumarin (
12) in pyridine followed by the addition of toluene-4-sulfonyl chloride led to the formation of the tosyl derivative (
15). Treatment of the latter with NaSH in ethanol furnished the corresponding 4-mercapto-coumarin (
14), which succeeded by transformation to the final product (
Scheme 7).
Scheme 7. The synthesis of 4-mercapto-coumarin (14) according to Ghosh’s work. Reagents and conditions: (a) TsCl, pyridine, 30 min, stirring, 90% yield; (b) NaSH, EtOH, 0–10 °C, 2 h, stirring, no yield was recorded as the product was used in the subsequent reaction without further purification.
5. Reactivity of 4-Mercapto-Coumarin
In 1975, Eiden and Zimmermannhe synthesized diphenylacetyl thioester (
16) and biscoumarinyl sulfide (
17) via the reaction of 4-mercapto-coumarin with 2,2-diphenylethen-1-one according to
Scheme 8 [31].
Scheme 8. The reaction of 4-mercapto-coumarin (14) with 2,2-diphenylethen-1-one. Reagents and conditions: (a) 2,2-diphenylethen-1-one, benzene, 16 h, reflux, 59% yield; (b) 2,2-diphenylethen-1-one, benzene, 5 h, 6.2% yield.
In the previous example of Ghosh’s work, 4-mercapto-coumarin served as a transitional compound to produce different coumarin-fused heterocycles employing 4-hydroxycoumarin (
12) as a starting reactant. As the compound (
14) was produced, it converted immediately to the final products (
Scheme 7).
Accordingly, various 2
H-thiopyrano[3,2-
c][1]benzopyran-5-ones (
19)
[28][29][28,29] and 4-aryloxymethylthiopyrano[3,2-
c][1]benzopyran-5(2
H)-ones (
21)
[19][30][19,30] were prepared through the thio-Claisen rearrangement of 4-propargylthio[1]benzopyran-2-ones (
18) and 4-[4-aryloxybut-2-ynylthio][1]benzopyran-2-ones (
20) (
Scheme 9). Compounds
18 and
20 were prepared based on a two-phase mixture of 4-mercapto-coumarin (
14) with propargyl halides and 1-chloro-4-aryloxybut-2-yne, respectively (
Scheme 9).
Scheme 9. Utilization of 4-mercapto-coumarin (14) in the synthesis of 2H-thiopyrano[3,2-c][1]benzopyran-5-ones. Reagents and conditions: (a,c) CHCl3, 1% aqueous NaOH, r.t., stirring, benzyltriethyl ammonium chloride (BTEAC) or tetrabutylammonium bromide (TBAB); (b,d) chlorobenzene, reflux, 30 min–4 h, six derivatives of 79–85% yield.
Regioselective synthesis of coumarin-annulated sulfur heterocycles,
cis-benzothiopyrano[3,2-
c]benzopyran-7(2
H)-ones (
24), was reported through aryl radical cyclization. The corresponding 4-[(2-bromobenzyl)sulfanyl]-2
H-chromen-2-ones (
23) was in situ prepared from a reaction between 4-mercapto-coumarin (
14) and tributyltin hydride (
22) in the presence of a radical initiator (AIBN) (
Scheme 10)
[32].
Scheme 10. Regioselective synthesis of coumarin-annulated sulfur heterocycles. Reagent and conditions: (a) 1% aq. NaOH–CHCl3, benzyltriethyl ammonium chloride (BTEAC), 1 h, r.t., R=H 83% yield, R=OCH3 85% yields; (b) Bu3SnH, AIBN, benzene, N2, reflux, 1 h, R=H 72% yield, R=OCH3 75% yield.
In another publication, some thieno[3,2-
c][1]benzopyran-4-ones (
27) were synthesized by thermal thio-Claisen rearrangement of 4-allylthio[1]benzo-pyran-2-ones (
26) (
Scheme 11). Compounds
26 resulted from a basic catalyzed reaction between 4-mercapto-coumarin (
8) and different allylic halides (
25). Without being separated from the reaction medium, compounds
26a–
d ended in four different derivatives via phase-transfer-catalyzed alkylation using TBAB or BTEAC as a catalyst. The differentiation of the end products depended on the alkyl substitutions (R
1, R
2) on the allyl halide, which influenced the mechanism of the cyclization during the final step (
Scheme 11)
[33].
Scheme 11. Regioselective synthesis of thieno[3,2-c][1]benzopyran-4-ones (27). Reagent and conditions: (a) 1% aq. NaOH-CHCl3, benzyltriethyl ammonium chloride (BTEAC), stirring, 4 h, r.t., four products, 75–85% yield; (b) reflux, 0.5 h, HCl, four products, 65–80% yield.
Nematollahi et al. investigated the electrochemical oxidation of catechols (
28) in the presence of 4-mercapto-coumarin (
14) as the nucleophile in water/acetonitrile (50/50) solution. Through an EC mechanism and in a one-pot process, 4-(dihydroxyphenylthio)-2
H-chromen-2-one derivatives
29a and
29b were afforded (
Scheme 12)
[34]. In another work of the same group, they explored the reactivity of catechol (
28) and 4-mercapto-coumarin (
14) in the presence of potassium ferricyanide as an oxidizing agent (decker oxidation) to develop thieno[3,2-
c]chromen-6-onederivatives (
30) (
Scheme 12)
[35].
Scheme 12. Synthetic pathways for the reaction of catechol with 4-mercapto-coumarin. Reagents and conditions: (a) sodium acetate solution (c = 0.2 M) in water/acetonitrile (50/50), undivided cell equipped with graphite anode, a large stainless steel gauze cathode, 25 °C, R=CH3 isomer ratio with 52.5%/47.5% yield, R=OCH3 isomer ratio with 96.5%3.5% yield; (b) sodium acetate solution (0.2 M)/acetonitrile (70/30), stirring, r.t., 20–30 min, R=CH3 75% yield, R=OCH3 70% yield.
A series of 3-chloro-1-(5-((2-oxo-2
H-chromen-4-yl)thio)-4-phenyl thiazol-2-yl)-4-substituted phenyl azetidin-2-ones (
36) were synthesized in five sequential steps with the participation of 4-mercapto-coumarin (
14) in addition to acetophenone (
31), thiourea, and chloroacetyl chloride
[36] (
Scheme 13). The synthesized compounds showed potent antimicrobial activity against
Staphylococcus aureus,
Escherichia coli,
Pseudomonas aeruginosa,
Streptococcus pyogenes,
Aspergillus niger,
Aspergillus clavatus, and
Candida albicans [36].
Scheme 13. 4-Mercapto-coumarin in the synthesis 3-chloro-azetidin-2-one derivatives (36). Reagents and conditions: (a) iodine, thiourea, ethanol, 2–3 h; (b) bromine, acetic acid reflux, 2 h; (c) aromatic aldehyde, acetic acid, ethanol, reflux, 6 h; (d) ethanol, reflux, 5 h; (e) chloroacetyl-chloride, triethylamine, 1,4-dioxane, reflux 7 h, 10 outputs 70–78% yields.