Palladium-Catalyzed Carboxylation Reactions: Comparison
Please note this is a comparison between Version 2 by Yvaine Wei and Version 1 by Bartolo Gabriele.

The efficient incorporation of carbon dioxide into an organic substrate (carboxylation) under catalytic conditions to give high value added molecules is one of the most important and fascinating areas of current organic synthesis. Carbon dioxide is a nonflammable, inexpensive and largely available C-1 feedstock. In fact, it allows converting an important waste (it is well known that carbon dioxide is produced in enormous amounts from the combustion of fossil fuels for the production of energy) into a variety of useful compounds, which can find application as fuels or in the pharmaceutical or material fields.

  • carbon dioxide
  • carboxylation
  • catalysis
  • palladium

1. Palladium-Catalyzed Incorporation of Carbon Dioxide into Olefinic Substrates

Suitably functionalized olefins are excellent substrates for the Pd-catalyzed incorporation of carbon dioxide to give high value added heterocyclic compounds. For example, vinyl epoxides undergo a Pd(0)-promoted ring-opening process with formation of a π-allylpalladium alkoxide intermediate I, which can attack CO2 to give a π-allylpalladium carbonate II that then undergoes intramolecular nucleophilic attack to give vinyl-substituted 5-membered cyclic carbonates 1, as shown in Scheme 1. This kind of process was independently disclosed by the groups of Fujinami [35][1] and Trost [36,37][2][3] in the 1980s; an example of synthetic application is shown in Scheme 2 [38][4].
Scheme 1.
 Pd(0)-catalyzed carboxylation of 2-vinyloxirane to 4-vinyl-1,3-dioxolan-2-one 
1
.
Scheme 2.
 Synthesis of 
trans
-(2-oxo-5-vinyl-1,3-dioxolan-4-yl)methyl 4-methylbenzenesulfonate.
In a similar manner, 5-vinyloxazolidinones 2 can be synthesized from vinylaziridines. For example, using a catalytic system consisting of Pd2(dba)3/PPh3/TBAT (TBAT = tetrabutylammonium difluorotriphenylsilicate), in toluene as the solvent and under particularly mild reaction conditions (0 °C and atmospheric pressure of CO2), a variety of 5-vinyloxazolidinones was prepared (Scheme 3). The process showed high regioselectivity and was also diastereospecific [39][5].
Scheme 3.
 Synthesis of 5-vinlyloxazolidinones 
2
 from vinylaziridines.
Cycloalkylidenecyclopropanes, bearing the highly reactive cyclopropane ring, have been reported to undergo ring-opening carboxylation under relatively mild conditions to yield five-membered lactones, as shown in Scheme 4 for the formation of 3 and 3′ [40][6]. Reactions were carried out in toluene at 120 °C under 40 atm of CO2, in the presence of Pd2(dba)3/PCy3 as the catalytic system and dimethyl sulfoxide (DMSO) as additive. The reaction showed a certain degree of diastereoselectivity, favoring the formation of the diastereoisomer with the carbonyl group in the axial position 3 in most cases. The proposed mechanism involves the initial oxidative insertion of Pd(0) into the cyclopropane ring with formation of a four-membered Pd(II) palladacycle intermediate I, as shown in Scheme 4, which may undergo a ring opening process to give a zwitterionic π-allypalladium complex II. The latter inserts CO2 by carbanion attack to give a carboxylate zwitterionic intermediate III (only the intermediate leading to the major diastereoisomer is shown in the scheme), from which the final product 3 is formed by intramolecular attack of the carboxylate group to the π-allyl moiety, with regeneration of the Pd(0) catalyst (Scheme 4).
Scheme 4.
 Synthesis of five-membered lactones 
3
 and 
3′
 from cycloalkylidenecyclopropanes.
Functionalized allylic substrates can also undergo carbon dioxide fixation under Pd(0) catalysis. As an example, 2-(acetoxymethyl)-3-(trimethylsilyl)propenes were converted into 2(5H)-furanones when allowed to react with CO2 (1 atm) in 1,2-dimethoxyethane (DME) or THF at 60–75 °C in the presence of Pd(PPh3)4, although in modest to moderate isolated yields (35–62%), as exemplified in Scheme 5 for the formation of 4 [41][7]. Mechanistically, the reaction follows a pathway similar to that seen in Scheme 1, as the key intermediate is a zwitterionic π-allylpalladium complex I [formed by oxidative addition of the substrate to Pd(0)], which reacts with CO2 to give a zwitterionic carboxylate complex II. The latter undergoes cyclization (by intramolecular nucleophilic attack of the carboxylate to the π-allylpalladium system), with regeneration of Pd(0) and formation of a 4-methylenedihydrofuran-2(3H)-one intermediate III, which eventually isomerizes to the final 2(5H)-furanone product 4 (Scheme 5).
Scheme 5.
 Synthesis of 4-methylfuran-2(5
H
)-one 
4
 from 2-((trimethylsilyl)methyl)allyl acetate.
Vinyl-substituted 5-membered cyclic carbonates 5 were synthesized from allylic carbonates by a sequential CO2 elimination–fixation process, as shown in Scheme 6, with formal CO2 recycling, again through the formation of a zwitterionic π-allylpalladium complex I [42][8]. Reactions were performed in the presence of Pd2(dba)3 as catalyst in the presence of dppf [1,1′-bis(diphenylphosphino)ferrocene] or dppe [1,2-bis(diphenylphosphino)ethane] as ligand, in dioxane at 50 °C under inert atmosphere. The process was shown to be enantiospecific when starting from nonracemic allylic carbonates to yield nonracemic cyclic carbonates.
Scheme 6.
 Synthesis of 4-vinyl-1,3-dioxolan-2-ones 
5
 from (
E
)-4-hydroxybut-2-en-1-yl methyl carbonates.

2. Palladium-Catalyzed Incorporation of Carbon Dioxide into Acetylenic Substrates

Acetylenic substrates have been reported to undergo several important carboxylation processes catalyzed by palladium, with formation of high value added compounds.
In 1986, Utimoto and coworkers reported the Pd(II)-catalyzed reaction of lithium 2-alkynyl carbonates (obtained from the reaction between lithium 2-alkyn-1-olates with CO2) with allylic chlorides to give 4-(but-3-en-1-ylidene)-1,3-dioxolan-2-ones 17 (Scheme 187) [76][9]. The synthetic transformation was carried out in a one-pot, two-step fashion, by allowing ynolate to react with CO2 first (in THF at −78 °C) and then adding the allyl chloride together with the catalyst PdCl2(MeCN)2 at the same temperature followed by stirring at 0 °C for 4 h, as shown in Scheme 187.
Scheme 187.
 Synthesis of 4-(but-3-en-1-ylidene)-1,3-dioxolan-2-ones 
17
 from lithium 2-alkyn-1-olates.
Later on, Inoue and coworkers reported the Pd(0)-catalyzed reaction between sodium 2-alkyn-1-olates bearing a terminal triple bond, aryl halides, and CO2 to give cyclic carbonates 18 [(E)-4-(arylmethylene)-1,3-dioxolan-2-ones], as shown in Scheme 19 [77]8 [10]. Reactions were carried out under 10 atm of CO2, in THF at 100 °C and in the presence of 2 mol% of Pd(PPh3)4. In this process, the initial oxidative addition of the aryl halide to Pd(0) leads to an Ar–Pd–X complex, which electrophilically activates the triple bond toward the anti 5-exo-dig intramolecular nucleophilic attack by the carbonate anion I formed by the reaction between the ynolate and CO2 (Scheme 198).
Scheme 198. Synthesis of (E)-4-(arylmethylene)-1,3-dioxolan-2-ones 18 from sodium 2-alkyn-1-olates and aryl halides.
2-Ynolates can also be formed in situ starting by deprotonation of propargyl alcohols in the presence of a suitable base. For example, recently a variety of propargyl alcohols with the triple bond substituted with an aryl group were converted into 5-(diarylmethylene)-1,3-dioxolan-2-ones 19 by their Pd(0)-catalyzed reaction with aryl halides and CO2 (1 atm), carried out in the presence of Pd2(dba)3 as catalyst and tBuOLi as the base (Scheme 209) [78][11]. Interestingly, with substrates bearing a terminal triple bond, a sequential Sonogashira coupling–carboxylation process took place, as exemplified in Scheme 20 9 for the case of the reaction of 2-methylbut-3-yn-2-ol with PhI (3 equiv) and CO2. The reaction, carried out in the presence of 5 mol% of PdCl2(PPh3)2 as the catalyst precursor, CuI (10 mol%) as cocatalyst, and tBuOLi as base (3 equiv), led to formation of 5-(diphenylmethylene)-4,4-dimethyl-1,3-dioxolan-2-one 20 in 55% yield (Scheme 209).
Scheme 209. Synthesis of 5-(diarylmethylene)-1,3-dioxolan-2-ones 19 and 20 from propargyl alcohols and aryl halides.
Polymeric materials can be obtained starting from bis(propargylic alcohol)s and aryl dihalides. Thus, linear and hyperbranched five-membered cyclic carbonate-based polymers 21 with high weight-average molecular weights (up to 42,500, 96% yield) were recently produced by allowing to react bis(propargylic alcohol) monomers and aryl dihalide monomers with CO2 (1 atm) in DMF in the presence of Pd(OAc)2 as catalyst precursor and tBuOLi as the base (Scheme 210) [79][12].
Scheme 210. Formation of five-membered cyclic carbonate-based polymers 21 from bis(propargylic alcohol)s and aryl dihalides.

3. Palladium-Catalyzed Incorporation of Carbon Dioxide into Other Substrates

Under suitable conditions, aryl halides and triflates can undergo palladium-catalyzed carboxylation with formation of important compounds.
In 2017, the groups of Maes and Beller reported the Pd(0)-catalyzed reaction of 2-bromoanilines with CO2 and isocyanides to give quinazoline-1,4(1H,3H)-diones 29 [106][13]. Reactions were performed in the presence of Pd(OAc)2 as the catalyst precursor, in the presence of BuPdAd2 (Ad = adamantly) as ligand and Cs2CO3 as base, in dioxane as the solvent at 80 °C and under 10 bar of CO2 (Scheme 2911). In the simplified version of the mechanism, oxidative addition of the Ar–Br bond to Pd(0) takes place, followed by insertion of the isocyanide. The reaction of the amino group with CO2 in the presence of the base then leads to a palladium carbamate intermediate I, which undergoes reductive elimination to yield Pd(0) and a 4-imino-1,4-dihydro-2H-benzo[d][1,3]oxazin-2-one intermediate II, from which the final product is obtained by base-promoted rearrangement (Scheme 2911).
Scheme 2911.
 Synthesis of quinazoline-1,4(1
H
,3
H
)-diones 
29
 from 2-bromoanilines and isocyanides.
In the same year (2017), independently, the group of Wang and Ji published exactly the same transformation from 2-iodoanilines under atmospheric pressure of carbon dioxide, using PdCl2 in the presence of PPh3 as the catalyst precursor and DBU as the base, in MeCN at 80 °C (Scheme 3012) [107][14]. Additionally, in 2018 Zhang and coworkers reported the use of both 2-bromo- and 2-iodoanilines using catalytic amounts of Pd(OAc)2 in the presence of PPh3 as ligand and CsF as base, under 2 MPa of CO2, in DMSO at 90 °C (Scheme 131) [108][15].
Scheme 3012.
 Synthesis of quinazoline-1,4(1
H
,3
H
)-diones from 2-iodoanilines and isocyanides.
Scheme 131.
 Synthesis of quinazoline-1,4(1
H
,3
H
)-diones from 2-haloanilines and 
tert
-butyl isocyanide.
Interestingly, very recently this kind of reactivity has been exploited for the synthesis of new heterocyclic polymers 30 with self-assembly and sensing properties, starting from bis(2-iodoaniline) and diisocyanide monomers, using PdCl2 and PPh3 as the catalyst precursor, under 1 atm of CO2, in DMA at 80 °C for 18 h (Scheme 3214) [109][16].
Scheme 3214.
 Synthesis of heterocyclic polymers 
30
 from bis(2-iodoaniline)s and diisocyanides.

4. Conclusions

The versatility of palladium-based catalysts has been successfully exploited also in the efficient conversion of carbon dioxide into high value added organic molecules of applicative and pharmacological interest. Particularly important results have been achieved in the Pd(0)-promoted CO2 incorporation into small rings (such as suitably functionalized epoxides and aziridines) as well as into suitably functionalized alkenes, allenes, or alkynes, to give highly important heterocyclic derivatives, such as cyclic carbonates, oxazolidinones, etc. Under Pd(II) catalysis, particularly important results have been achieved with propargyl amines as substrates, with formation of oxazolidinones, which could also incorporate an exocyclic estereal function working in the presence of CO together with CO2 under appropriate conditions.

On this grounds, it is expected that in the future palladium will play a major role in CO2 utilization and incorporation into suitable substrates, possibly in the presence of other promoting species (either metal-based or organo-based) as cocatalyst(s), which will make it possible to achieve more demanding processes for the direct and selective synthesis of complex molecular architectures.

References

  1. Fujinami, T.; Suzuki, T.; Kamiya, M.; Fukuzawa, S.-I.; Sakai, S. Palladium catalyzed reaction of butadiene monoxide with carbon dioxide. Chem. Lett. 1985, 1985, 199–200.
  2. Trost, B.M.; Angle, S.M. Palladium-mediated vicinal cleavage of allyl epoxides with retention of stereochemistry: A cis hydroxylation equivalent. J. Am. Chem. Soc. 1985, 107, 6123–6124.
  3. Trost, B.M.; Lynch, J.K.; Angle, S.M. Asymmetric cis-hydroxylation via epoxidation-carboxylation: A formal synthesis of (+)-Citreoviral. Tetrahedron Lett. 1987, 28, 375–378.
  4. Wershofen, S.; Scharf, H.-D. Synthesis of side-chain unsaturated endo- and exo-brevicomis. Representative of pheromone analogs in the dioxabicyclo octane series. Synthesis 1988, 11, 854–858.
  5. Fontana, F.; Chen, C.C.; Aggarwal, V.K. Palladium-catalyzed insertion of CO2 into vinylaziridines: New route to 5-vinyloxazolidinones. Org. Lett. 2011, 13, 3454–3457.
  6. Chen, K.; Jiang, M.; Zhang, Z.; Wei, Y.; Shi, M. Palladium (0)-catalyzed reaction of cyclopropylidenecycloalkanes with carbon dioxide. Eur. J. Org. Chem. 2011, 2011, 7189–7193.
  7. Greco, G.E.; Gleason, B.L.; Lowery, T.A.; Kier, M.J.; Hollander, L.B.; Gibbs, S.A.; Worthy, A.D. Palladium-catalyzed cycloaddition of carbon dioxide and trimethylenemethane under mild conditions. Org. Lett. 2007, 9, 3817–3820.
  8. Yoshida, M.; Ohsawa, Y.; Ihara, M. Palladium-catalyzed carbon dioxide elimination-fixation reaction of 4-methoxycarbonyloxy-2-buten-1-ols. J. Org. Chem. 2004, 69, 1590–1597.
  9. Iratani, K.; Yanagihara, N.; Utimoto, K. Carboxylative coupling of propargylic alcohols with allyl chloride. J. Org. Chem. 1986, 51, 5499–5501.
  10. Inoue, Y.; Itoh, Y.; Yen, I.-F.; Imaizumi, S. Palladium (0)-catalyzed carboxylative cyclized coupling of propargylic alcohol with aryl halides. J. Mol. Catal. 1990, 60, L1–L3.
  11. Sun, S.; Wang, B.; Gu, N.; Yu, J.-T.; Cheng, J. Palladium-catalyzed arylcarboxylation of propargylic alcohols with CO2 and aryl halides: Access to functionalized α-alkylidene cyclic carbonates. Org. Lett. 2017, 19, 1088–1091.
  12. Song, B.; Bai, T.; Xu, X.; Chen, X.; Liu, D.; Guo, J.; Qin, A.; Ling, J.; Tang, B.Z. Multifunctional linear and hyperbranched five-membered cyclic carbonate-based polymers directly generated from CO2 and alkyne-based three-component polymerization. Macromolecules 2019, 52, 5546–5554.
  13. Mampuys, P.; Neumann, H.; Sergeyev, S.; Orru, R.V.A.; Jiao, H.; Spannenberg, A.; Maes, B.U.W.; Beller, M. Combining isocyanides with carbon dioxide in palladium-catalyzed heterocycle synthesis: N3-substituted quinazoline-2, 4 (1H,3H)-diones via a three-component reaction. ACS Catal. 2017, 7, 5549–5556.
  14. Xu, P.; Wang, F.; Wei, T.-Q.; Yin, L.; Wang, S.-Y.; Ji, S.-J. Palladium-catalyzed incorporation of two C1 building blocks: The reaction of atmospheric CO2 and isocyanides with 2-iodoanilines leading to the synthesis of quinazoline-2, 4 (1H,3H)-diones. Org. Lett. 2017, 19, 4484–4487.
  15. Zhang, W.-Z.; Li, H.; Zeng, Y.; Tao, X.; Lu, X. Palladium-catalyzed cyclization reaction of o-haloanilines, CO2 and isocyanides: Access to quinazoline-2, 4-(1H,3H)-diones. Chin. J. Chem. 2018, 36, 112–118.
  16. Liu, D.; Song, B.; Wang, J.; Li, B.; Wang, B.; Li, M.; Qin, A.; Tang, B.Z. CO2-Involved and isocyanide-based three-component polymerization toward functional heterocyclic polymers with self-assembly and sensing properties. Macromolecules 2021, 54, 4112–4119.
More
Video Production Service