Biomass Availability in Europe: Comparison
View Latest Version
Please note this is a comparison between Version 3 by Dimitrios Kourkoumpas and Version 2 by Dimitrios Kourkoumpas.

Biomass has been demonstrated as a capable source of energy to fulfill the increasing demand for clean energy sources which could last a long time. Replacing fossil fuels with biomass-based ones can potentially lead to a reduction of carbon emissions, which is the main target of the EU climate strategy. Based on RED II (revised Renewable Energy Directive 2018/2001/EU) and the European Green Deal, biomass is a promising energy source for achieving carbon neutrality in the future. However, the sustainable potential of biomass resources in the forthcoming decades is still a matter of question.

  • biomass
  • the European Green Deal
  • GHG emissions
  • RED II
  • stranded assets
  • coal phase-out
  • biomass conversion technologies
  • cost
  • SWOT analysis

1. Introduction 

1. Introduction

 

1.1. Policy Issues of Climate Change

 

 

The EU has updated its energy policy framework, in order to achieve the transition away from fossil fuels towards cleaner energy, in line with the EU’s Paris Agreement commitments about the reduction of greenhouse gas (GHG) emissions. The climate and energy framework for the EU sets targets for the 2021–2030 period, in which the GHG emissions reduction will be at least 40%, as well as the target that the shares of renewable energy and the improvement in energy efficiency will be at least 32% and 32.5%, respectively.
 
These changes will cause a significant impact from a consumer, environmental and economic perspective in the future. Consequently, they contribute to the long-term strategy of net-carbon emissions in the EU by 2050. This objective is a pillar of the new growth strategy, the European Green Deal, which corresponds to the Paris Agreement. It is a set of policy initiatives that reaffirm the Commission’s intension to commit Europe to being the first continent to achieve climate-neutrality by 2050, increasing the EU 2030 climate target regarding GHG emissions reduction to at least 50%, and towards 55%, in a responsible way. All key economic sectors will be examined, including energy, transport, industry and agriculture. The action plan will be released in the summer of 2020.

 

 

 

 

Reducing Carbon Emissions: EU Targets

The RED II, included in the Clean Energy for all Europeans package, came into force intending to keep the EU as the global leader in renewables. Towards this direction, electricity produced from biomass fuels could be taken into account by all installations with a total rated thermal input lower than 50 MW, and in these with a total rated thermal input over 50 MW, which apply high-efficiency cogeneration technology or for only-electricity-producing, meeting specific technical demands. Installations with a capacity above 100 MW could be taken into account only if the net-electrical efficiency is at least 36%. About power-only-installations, the directive states that they will be considered on condition that they do not use mainly fossil fuels, and there is no cost-effective potential for the adjustment of high-efficiency cogeneration technology as stated in Article 14 of Directive 2012/27/EU. The GHG emission savings from the use of biomass fuels are expected to be at least 70% for installations starting within the period 2021–2025, and 80% for installations starting up in the beginning of 2026. The Annex V (part C) contains the methodology for the calculation of the total GHG emissions and emission saving of biomass fuels (RED II Methodology).
 
Whilst coal remains a main fuel in the European energy mix, coal power is on the decline as affected by several utility plans, which aim to be coal-free in 10 to 15 years. The transition to lower-carbon energy forms and innovative technologies, for instance, carbon capture and storage, is mandatory in order to meet the EU’s binding target to reduce carbon emissions by 2030. In 2018, the total emissions of Europe’s coal plants were 625 million tons of CO2 [1], which accounts for almost 15% [2] of the EU’s total GHG emissions. Although the shift to a low-carbon economy expounds opportunities, economic and social impacts in many coal regions should not be neglected, such as the utilization of capital assets (coal power plants), otherwise, they have to be abandoned. In this case, biomass could play a significant role, in order to be used as a non-conventional fuel for these plants, keeping the infrastructure in operation even while most of the countries have announced the coal phase-out.

 

 

1.2. The Transition to the Post-Lignite Era

1.2. The Transition to the Post-Lignite Era

 

 

The commitments to greatly limit carbon emissions by 2030 may demand a costly shift for the global economy. This entails the possibility of assets with high carbon-intensive operations becoming “stranded”. That means that these technologies would change into unprofitable assets, because of the regulation (e.g., taxes on carbon) and technological development. Carbon restrictions would possibly affect carbon-intensive industries in general, and especially industries depending on energy or other carbon-intensive inputs [3]. McGlade and Elkins’ (2015) [4] estimation in the context of accomplishing the Paris Agreement’s goal, of keeping the average global temperatures increasing below 2 °C, was that around 35%, 50% and 90% of current oil, gas and coal reserves, respectively, are useless. Following this, the Economist Intelligence Unit appraises that the expected financial loss of assets will be approximately USD 4.2 trillion [5].
 
The implementation of regulation to mitigate the emissions, so far, has shown significant variability and volatility in setting a cost for CO2 emissions, and thus a depreciation of investment in green energy sources. This signifies that global investors are currently confronted with a stark choice. Either they will experience a failure unless their holdings in fossil fuel industries act on climate change, and be held, or they will face losses to their whole portfolio of manageable assets, if little lessening is forthcoming. Charting a path away from these two alternatives should be a strong incentive for long-term investors to engage with companies in their portfolios, and to alter investments in the direction of a lucrative, low-carbon future [5]. This strategy of diversifying away from vulnerable products, and diverting the marketplace and jobs toward income sources that are more environmentally friendly, is named “Economic diversification” [6].

 

2. Data, Model, Applications and Influences

 

2. Data, Model, Applications and Influences

 

Biomass processing intends to endow biomass with characteristics that could ensure a simple and environmentally friendly technological conversion into useful energy. The conversion pathways are categorized by the type of biomass input, the technologies, and the end products. The harvested biomass can be used by either direct conversion to energy (primary biomass), or being treated before the energy conversion (secondary biomass). Primary biomass, such as woodchips and logwood, is burned usually to produce energy for electricity supply, cooking, steam, space heating and process heat. Secondary biomass is in different forms, such as solids (e.g., pellets, wood thermochemically treated fuel), liquids (e.g., vegetable oil, biodiesel, HVO/HEFA, bioethanol, Fischer-Tropsch fuels) or gases (e.g., syngas, biomethane, biogas, bio-H2,), and can be used for a large number of applications, for instance, high-temperature industrial processes and transport [47]. These valuable energetic biomass forms could be interdependent in many cases. Specifically, syngas as a gas mixture of hydrogen, CO2 and methane, could be upgraded to increase H2 fraction in syngas [48]. Different parameters affecting the production of syngas from biomass, e.g. reactor model and conditions, and feedstock (carbon structure of biomass, the content of sulfur compound, etc.), have to be adjusted accordingly [49]. Moreover, the use of catalysts could be an effective method for increasing the H2 yield from syngas [50].

 

The pathways of biomass-to-energy conversion can be defined by the processes: (i) The thermo-chemical processes, such as combustion, gasification, pyrolysis, torrefaction and carbonization, which are based on thermal energy of biomass. (ii) The physical-chemical conversion processes based on physical (e.g., milling, pressing, etc.) and chemical processes (e.g., hydrothermal treatment, esterification). (iii) The bio-chemical conversion, which is based on biological processes including the use of microorganisms, such as anaerobic digestion producing biogas, and fermentation producing ethanol [25]. The main distinction of a preferable technology is the moisture contented in biomass. In the case of "dry" biomass, thermochemical technologies are mainly preferred, and in the case of “wet” biomass, bio-chemical conversion technologies could be more suitable [51].

 

The total phase-out coal target, while maintaining the current assets in operation, can be a reason to use high shares of solid biomass in the fuel blend of biomass for powering technology, often up to 100%. This demands the change of fuel input, pre-treatment and burning system to something that could also use biomass properly. An example of a 100% retrofit to biomass is the power plant “Rodenhuize 4” (Table 3). The conversion began with the installation of infrastructures in transport and pre-treatment for the proper handling of wood pellets, and the conversion of a one-burner row in 2005. Firstly, the switch of burner rows to wood pellet firing was completed, and finally, the complete switching was succeeded by replacing the burner, and installing a Selective Catalytic Reduction (SCR) unit in order to monitor the NOx emissions [52].

 

Table 3. Retrofitting coal-to-biomass power plants [51].
Power Plant/Unit Country Finalization of Retrofits Installed Capacity (MW Electrical) Fuels Used Combustion Technology
Les Awirs 4 Belgium 2005 80 Wood pellets PF
Helsingborg Sweden 2006 126 Wood pellets PF
Västhamnsverket Sweden 2006 69 Wood pellets PF
Herning Denmark 2009 75 44% wood chips, 44% wood pellets, 12% top-gas GF (chips)/PF (pellets)
Rodenhuize 4 Belgium 2011 180 Wood pellets PF
Tilbury * United Kingdom 2011 750 Wood pellets PF
Ironbridge * United Kingdom 2012 740 Wood pellets PF
Drax 1 United Kingdom 2013 660 Wood pellets PF
Polaniec Green Unit Poland 2013 195 80% wood chips, 20% agrobiomass CFB
Drax 2 United Kingdom 2014 645 Wood pellets PF
Atikokan Canada 2014 205 Wood pellets PF
Drax 3 United Kingdom 2015 645 Wood pellets PF
Thunder Bay 3 * Canada 2015 160 Arbacore wood pellets (steam explosion) PF
Avedore 1 Denmark 2016 258 Wood pellets PF
Studstrup 3 Denmark 2016 362 Wood pellets PF
Yeongdong 1 South Korea 2017 125 Wood pellets PF
Drax 4 United Kingdom 2018 645 Wood pellets PF
Amer 9 Netherlands 2019 631 80% wood pellets, 20% coal PF
Asnæs 6 Denmark 2019 25 Wood chips BFB
Suzukawa Japan 2020 (expected) 112 Wood pellets PF
Uskmouth United Kingdom 2021 (expected) 240 Subcoal® pellets (RDF pellets) PF

A summary of plants that have been shifted from coal to biomass is provided in Table 3. Most retrofit conversions have been applied in pulverized fuel boilers. In these boilers, the retrofits were implemented to the pre-treatment and feeding system, along with the logistics infrastructure for biomass sourcing. An extensive retrofit example is the Polaniec Green Unit in Poland, in which the older boiler was replaced with an advanced circulating fluidized bed boiler, and the steam turbine was modified too.

 

Currently, the largest biomass consumer in the world, with four biomass-converted units, is the power plant company Drax. In 2018, more than 7 million tons of wood pellets were used as feedstock in this plant, originating mostly from the USA (62.2%) and Canada (17.3%), with the rest of the feedstock volumes originating from Brazil and other European countries [53].

 

 

References

 

 

  • FAO. 2019. Available online: http://www.fao.org/3/j4504E/j4504e06.htm (accessed on 30 March 2020).
  • Li, S.; Zheng, H.; Zheng, Y.; Tian, J.; Jing, T.; Chang, J.-S.; Ho, S.-H. Recent advances in hydrogen production by thermo-catalytic conversion of biomass. Int. J. Hydrogen Energy 2019, 44, 14266–14278. [Google Scholar] [CrossRef]
  • Liu, P.; Wang, Y.; Zhou, Z.; Yuan, H.; Zheng, T.; Chen, Y. Effect of carbon structure on hydrogen release derived from different biomass pyrolysis. Fuel 2020, 271, 117638. [Google Scholar] [CrossRef]
  • Chianese, S.; Fail, S.; Binder, M.; Rauch, R.; Hofbauer, H.; Molino, A.; Blasi, A.; Musmarra, D. Experimental investigations of hydrogen production from CO catalytic conversion of tar rich syngas by biomass gasification. Catal. Today 2016, 277, 182–191. [Google Scholar] [CrossRef]
  • WIP Renewable Energies. Technical options for retrofitting industries with bioenergy—A Handbook, 2020Biofit. Available online: https://www.biofit-h2020.eu/news-and-events/handbook-published/ (accessed on 30 March 2020).
  • Savat, P. Activities at Rodenhuize Power Plant: Advanced and Max Green Projects; Topic Orientated Technical Meeting 35—Co-firing secondary fuels in power generation: From fuel characterization to full scale testing; IFRF: Pisa, Italy, 2010. [Google Scholar]
  • Drax Group plc. Annual report and accounts 2018. 2018. Available online: https://www.drax.com/wp-content/uploads/2019/03/Drax-Annual-report-accounts-2018.pdf (accessed on 30 March 2020).
    • FAO. 2019. Available online: http://www.fao.org/3/j4504E/j4504e06.htm (accessed on 30 March 2020).
    • Li, S.; Zheng, H.; Zheng, Y.; Tian, J.; Jing, T.; Chang, J.-S.; Ho, S.-H. Recent advances in hydrogen production by thermo-catalytic conversion of biomass. Int. J. Hydrogen Energy 2019, 44, 14266–14278. [Google Scholar] [CrossRef]
    • Liu, P.; Wang, Y.; Zhou, Z.; Yuan, H.; Zheng, T.; Chen, Y. Effect of carbon structure on hydrogen release derived from different biomass pyrolysis. Fuel 2020, 271, 117638. [Google Scholar] [CrossRef]
    • Chianese, S.; Fail, S.; Binder, M.; Rauch, R.; Hofbauer, H.; Molino, A.; Blasi, A.; Musmarra, D. Experimental investigations of hydrogen production from CO catalytic conversion of tar rich syngas by biomass gasification. Catal. Today 2016, 277, 182–191. [Google Scholar] [CrossRef]
    • WIP Renewable Energies. Technical options for retrofitting industries with bioenergy—A Handbook, 2020Biofit. Available online: https://www.biofit-h2020.eu/news-and-events/handbook-published/ (accessed on 30 March 2020).
    • Savat, P. Activities at Rodenhuize Power Plant: Advanced and Max Green Projects; Topic Orientated Technical Meeting 35—Co-firing secondary fuels in power generation: From fuel characterization to full scale testing; IFRF: Pisa, Italy, 2010. [Google Scholar]
    • Drax Group plc. Annual report and accounts 2018. 2018. Available online: https://www.drax.com/wp-content/uploads/2019/03/Drax-Annual-report-accounts-2018.pdf (accessed on 30 March 2020).

© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/)
Feedback