Centrifugal Spinning is a fibre-forming method in which a polymer solution or melt is ejected from a rotating nozzle or reservoir, and the centrifugal force draws the jet into a thin filament [1]. A regularized thin-fiber model describes how the jet thins and solidifies into a nanofibre [1]. Amylopectin-rich starches spin into fibres whose formation mechanism follows the evolution of the jet in the same system [2]. At high rotation speed, slip of the polymer solution governs the outcome, and poly(ethylene oxide)/poly(vinyl alcohol) composite fibres have been produced on that basis [3]. Polymer concentration and nozzle material both shift the attainable fibre diameter [4]. The process also yields fibrous scaffolds for cell culture, where the open, aligned architecture supports attachment and spreading [5].
- rotary jet spinning
- nanofiber
- jet evolution
- fiber morphology
- scaffold
- polymer solution
References
- Taghavi, S.M.; Larson, R.G. Regularized thin-fiber model for nanofiber formation by centrifugal spinning. Physical Review E 2014, 89, 023011. [CrossRef]
- Li, X.; Lu, Y.; Hou, T.; Zhou, J.; Wang, A.; Zhang, X.; Yang, B. Jet evolution and fiber formation mechanism of amylopectin rich starches in centrifugal spinning system. Journal of Applied Polymer Science 2021, 138, 50275. [CrossRef]
- Ye, P.; Guo, Q.; Zhang, Z.; Xu, Q. High-Speed Centrifugal Spinning Polymer Slip Mechanism and PEO/PVA Composite Fiber Preparation. Nanomaterials 2023, 13, 1277. [CrossRef]
- Merchiers, J.; Meurs, W.; Deferme, W.; Peeters, R.; Buntinx, M.; Reddy, N.K. Influence of Polymer Concentration and Nozzle Material on Centrifugal Fiber Spinning. Polymers 2020, 12, 575. [CrossRef]
- Wang, L.; Shi, J.; Liu, L.; Secret, E.; Chen, Y. Fabrication of polymer fiber scaffolds by centrifugal spinning for cell culture studies. Microelectronic Engineering 2011, 88, 1718-1721. [CrossRef]