Submitted Successfully!
To reward your contribution, here is a gift for you: A free trial for our video production service.
Thank you for your contribution! You can also upload a video entry or images related to this topic.
Version Summary Created by Modification Content Size Created at Operation
1 + 1537 word(s) 1537 2021-04-22 07:52:52 |
2 format correct Meta information modification 1537 2021-06-01 03:10:27 |

Video Upload Options

Do you have a full video?

Confirm

Are you sure to Delete?
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Denizli, A. Injectable Cryogels. Encyclopedia. Available online: https://encyclopedia.pub/entry/10314 (accessed on 28 March 2024).
Denizli A. Injectable Cryogels. Encyclopedia. Available at: https://encyclopedia.pub/entry/10314. Accessed March 28, 2024.
Denizli, Adil. "Injectable Cryogels" Encyclopedia, https://encyclopedia.pub/entry/10314 (accessed March 28, 2024).
Denizli, A. (2021, May 31). Injectable Cryogels. In Encyclopedia. https://encyclopedia.pub/entry/10314
Denizli, Adil. "Injectable Cryogels." Encyclopedia. Web. 31 May, 2021.
Injectable Cryogels
Edit

Cryogels are interconnected macroporous materials that are synthesized from a monomer solution at sub-zero temperatures. 

injectable cryogel supermacroporous polymer

1. Introduction

Nowadays, the need for injectable biomaterials that have hemostatic effects in the field of tissue engineering and that are used in tissue regeneration is increasing. Furthermore, these biomaterials are preferred in order to minimize the risks and complications that may occur with surgical implantation. In addition to being biocompatible, three-dimensional (3D) scaffold biomaterials with physicochemical properties such as hardness, elasticity, and biological degradation provide a structural support and physical environment for cell attachment and subsequent tissue development. Cryogels, one of the biomaterials with injectable 3D scaffold structures, can be loaded with therapeutic agents or cells in line with the needs developing in clinical and tissue engineering studies. Thanks to their highly macroporous and interconnected structures, cryogels provide a suitable microenvironment for cell transmission, cellular infiltration, and neovascularization [1]. In recent years, the most widely used biocompatible polymeric biomaterials in biomedicine applications are cryogels.

Cryotropic gelation is a gel formation process that is used to produce supermacroporous hydrophilic gels called cryogels. Cryogels are interconnected supermacroporous materials that can be synthesized at sub-zero temperatures using an existing activator/initiator pair [2][3]. Polymerization occurs in a frozen monomer solution in the interstitial spaces between ice crystals. Ice crystals act as a porogen throughout the scaffold during polymerization, and a supermacroporous polymer is formed after thawing [4][5]. Cryogels have important properties such as flexibility, large pores (10–200 μm), high mechanical strength, short diffusion paths, and good biocompatibility [6][7]. Cryogels can be synthesized in different forms such as powder, column, bead, sphere, membrane, monolithic, and injectable. Injectable cryogels with 3D porous structures are used for minimally invasive implantation in biomedicine applications, thanks to the advantages provided by their elastic structures, as well as their adjustable micron-scale and desired geometric structures. Injectable cryogels can be used in a variety of biomedicine applications, including diagnosis, therapy, drug delivery, and tissue engineering [8][9][10].

2. Cryogels

Cryogels are interconnected supermacroporous materials that can be synthesized at sub-zero temperatures by using a monomer solution and an available initiator/activator pair [11][12]. At a temperature below the freezing point of the solvent, the polymerization or crosslinking reaction occurs in the semi-solid phase containing the monomer [13][14]. After the reaction product melts at room temperature, a loose macroporous cryogenic gel is prepared and referred to as a cryogel (Figure 1). Water is used as a solvent, dispersant, and porogen. Water helps the cryogel to form its macroporous structure with a phase separation in which the frozen ice crystals of water temporarily transform into a fully interconnected cryogenic skeleton [15][16].

Figure 1. Illustration of supermacroporous cryogel preparation.

Cryogels are produced with a wide variety of morphologies and properties that can be used for different applications. Cryogels are heterogeneous, non-transparent, large macroporous materials [17][18]. The macroporous size of cryogels varies depending on experimental synthesis conditions such as the concentrations and ratios of monomer, solvent, initiator and cross-linkers, temperature, and freezing rate. Supermacroporous cryogels are usually spongy materials with interconnected porous structures. The properties of cryogels depend on the pore structure, the thickness of the pore wall, and the density expressed as polymer density in the swollen pore walls [19][20].

The pore size of the cryogel is mostly dependent on many factors such as the initial concentration of monomers, physicochemical properties, and the degree of freezing. Additionally, it controls the mass transfer in the cryogel together with the connection between the pore networks. The macroscopic mechanical properties of the cryogel are determined by its pore wall thickness and density. Cryogels contain large amounts of liquid. The most common solvent used is water [21].

The highly porous interconnected structure allows for the unhindered diffusion of all solutes, including macromolecules and even colloid particles (protein micelles and viruses) in the cryogels with pores larger than 50 µm. This property makes cryogels attractive materials for bioseparation and cell culture [22][23][24][25]. The synthesis, structure, and applicability of cryogels that can be used in a variety of biomedicine applications, including enzyme activity [26], drug delivery [27], protein purification [28], and tissue engineering [29], are very important. The heat and mass transfer of cryogels is faster than normal gels with the same chemical composition. Moreover, the response time of cryogels is fast at short distances in the thin walls of macroporous structures [30][31][32][33]. The flow channel in a cryogel is large enough due to the interconnected macropore structure. Pore wall thickness and density determine the macroscopic mechanical properties of the cryogel, and the interconnectedness of the pores in the cryogel controls mass transport [34][35][36][37].

Cryogels, which are spongy materials prepared by the cryopolymerization of an aqueous solution containing gel-forming monomers under freezing conditions, can be prepared in the form of powder, column, bead, sphere, membrane, monolithic, and injectable material. Cryogels have advantages such as high blood compatibility, high water content, resistance to degradation, no toxicity, and pressure drop properties. These advantages allow them to be used without any diffusion problems when working with biological macromolecules [38][39][40][41][42].

3. Injectable Cryogels

In recent years, injectable cryogels have been investigated for the minimally invasive implantation of 3D skeletons. The injectability of cryogels is a result of their elastic structure. These properties are very important for applications in soft tissue reconstruction when cryogels are injected subcutaneously. Cryogels have unique structural properties such as shape memory properties, degrees and mechanisms of crosslinking, interconnected macropores, and dense polymer walls [43].

Both micro- and macroscale injectable cryogels are used to provide a 3D porous structure, help protect encapsulated biological agents against degradation, and control the delivery of mammalian cells and biomolecules to host tissues. In addition, particle-based biomaterials, with their small size, can show insufficient retention at the injection site. This limitation increases the need for repeated injections, causing both serious side effects and increased costs. To reduce these limitations, macroscale cryogels are being investigated, as they can form a localized structure at the injection site [44][45].

With their shape memory properties and sponge-like macroporous structural features, injectable cryogels, which have similar properties to cryogels, can be easily recognized and accepted by the body with cell and purposeful ligand immobilization. For this reason, they have the potential to be the preferred biomaterial for many biomedical applications. These biomaterials have been used in many biomedicine applications such as immunotherapy, drug delivery, and tissue engineering. [27][46][47][48][49][50].

Biodegradable cryogels that provide temperature sensitive sol–gel transitions between body and room temperature are used in biomedicine applications. Biodegradation, which is an important element when preparing scaffolds for tissue engineering, is important for facilitating new tissue formation and integration upon implantation [51][52][53][54][55].

Macro-scale protein drug delivery systems are used to control the delivery of drugs to specific tissues. Careful material selection is often required for establishing an effective polymer drug delivery system for a particular protein, achieving the desired protein release profile, and maintaining bioactivity [56]. In drug-loaded cryogels, because the porous structure triggers the burst release of the drug, the use of a nanocarrier to overcome this situation could be a potential candidate for both controlling the drug release rate and enhancing the cryogels [57].

For many biomedicine applications, there is an increasing need for the tissue engineering of advanced 3D scaffolds to provide mechanical and structural support to tissue and cell regeneration. For this reason, 3D scaffolds should be made of resorbable and biocompatible polymers and have large macropores linked to each other [58].

Bone defects often require invasive surgery and are difficult to treat. Injectable cryogels are often used for bone tissue regeneration in the treatment of pathological fractures. Hixon et al. used injectable alginate-based cryogels with platelet-rich plasma (PRP). Although the use of PRP adversely affected the physical properties of cryogels, the freeze–thaw cycle improved their porosity and compressibility. These PRP-loaded, injectable cryogels have been shown to increase the proliferation and mineralization of human bone osteosarcoma cells. Injectable cryogel studies in biomedicine will be discussed in the following sections [59].

Improving the properties of injectable cryogels has provided promising results for biomedicine applications, and many methods are currently being studied in this regard. One of the major problems is insufficient control over the release of biomolecules, particularly low molecular weight components. Due to the high porosity in their structure, drug-loaded cryogels result in a burst release that limits their potential as a drug delivery carrier. Koshy et al. used injectable cryogels to improve drug release kinetics. Injectable cryogels combined with laponite nanoparticles (NPs) preloaded with immunomodulatory factors. Unlike freely injectable laponite cryogels, laponite NPs immobilized in injectable cryogels have been observed to inhibit burst release. In addition, the varying laponite content better adjusts the release kinetics from the cryogels while maintaining the injectability of the syringe [60].

Cryogels are reversible, collapsible, and elastic materials, and these properties make them suitable for injection. Generally, 16-gauge (16 G) is the preferred needle size for injecting 8 × 8 × 1 mm³. 16 G needles reduce penetration compared to surgical implantations, so the use of smaller needles will also reduce tissue damage and eliminate this problem. Therefore, optimization studies are required to improve the injectability of cryogels. While this size of injectable cryogel is used in biomedicine applications where large scaffolds are required, some optimization studies are carried out to avoid problems. In addition to the geometry and crosslinking mechanisms of injectable cryogels, it is necessary to optimize macrostructural properties such as pore size, pore connectivity, and flexibility. It is important to design injectable cryogels to prevent postoperative complications [10][61].

References

  1. Bencherif, S.A.; Sands, R.W.; Bhatta, D.; Arany, P.; Verbeke, C.S.; Edwards, D.A.; Mooney, D.J. Injectable preformed scaffolds with shape-memory properties. Proc. Nalt. Acad. Sci. USA 2012, 109, 19590–19595.
  2. Plieva, F.M.; Galaev, I.Y.; Mattiasson, B. Macroporous gels prepared at subzero temperatures as novel materials for chromatography of particulate-containing fluids and cell culture applications. J Sep. Sci. 2007, 30, 1657–1671.
  3. Mikhalovsky, S.V.; Savina, I.N.; Dainiak, M.; Ivanov, A.E.; Galaev, I.Y. 5.03-Biomaterials/Cryogels, Comprehensive Biotechnology, 2nd ed.; Moo-Young, M., Ed.; Academic Press: Burlington, MA, USA, 2011; pp. 11–22.
  4. Plieva, F.M.; Galaev, I.Y.; Noppe, W.; Mattiasson, B. Cryogel applications in microbiology. Trends Microbiol. 2008, 16, 543–551.
  5. Dainiak, M.B.; Galaev, I.Y.; Kumar, A.; Plieva, F.M.; Mattiasson, B. Chromatography of living cells using supermacroporous hydrogels, cryogels. Adv. Biochem. Eng. Biotechnol. 2007, 106, 101–127.
  6. Lozinsky, V.I. Cryostructuring of polymeric systems. 50.† cryogels and cryotropic gel-formation: Terms and definitions. Gels 2018, 4, 77.
  7. Shih, T.Y.; Blacklow, S.O.; Li, A.W.; Freedman, B.R.; Bencherif, S.; Koshy, S.T.; Darnell, M.C.; Mooney, D.J. Injectable, tough alginate cryogels as cancer vaccines. Adv. Healthc. Mater. 2018, 7, 1701469–1701482.
  8. Kang, H.W.; Lee, S.J.; Ko, I.K.; Kengla, C.; Yoo, J.J.; Atala, A. A 3D bioprinting system to produce human-scale tissue constructs with structural integrity. Nat. Biotechnol. 2016, 34, 312.
  9. Dhandayuthapani, B.; Yoshida, Y.; Maekawa, T.; Kumar, D.S. Polymeric scaffolds in tissue engineering application: A review. Int. J. Polym. Sci. 2011, 1–19.
  10. Eggermont, L.J.; Rogers, Z.J.; Colombani, T.; Memic, A.; Bencherif, S.A. Injectable Cryogels for Biomedical Applications. Trends Biotechnol. 2020, 38, 418–431.
  11. Uzunoğlu, G.; Çimen, D.; Bereli, N.; Çetin, K.; Denizli, A. Removal of Low-Density Lipoprotein Cholesterol from Blood Plasma via Heparin Modified Cryogels. J. Biomater. Sci. Polym. Ed. 2019, 30, 1276–1290.
  12. Çimen, D.; Göktürk, I.; Yılmaz, F. Removal of Iron by Chelation with Molecularly Imprinted Supermacroporous Cryogel. Artif. Cells Nanomed. Biotechnol. 2016, 44, 1158–1166.
  13. Çetin, K.; Denizli, A. 5-Fluorouracil delivery from metal-ion mediated molecularly imprinted cryogel discs. Colloids Surf. B 2015, 126, 401–406.
  14. Saylan, Y.; Denizli, A. Supermacroporous Composite Cryogels in Biomedical Applications. Gels 2019, 5, 20.
  15. Plieva, F.; Huiting, X.; Galaev, I.Y.; Bergenståhl, B.; Mattiasson, B. Macroporous elastic polyacrylamide gels prepared at subzero temperatures: Control of porous structure. J. Mater. Chem. 2006, 16, 4065–4073.
  16. Okay, O.; Lozinsky, V.I. Synthesis and structure–property relationships of cryogels. In Polymeric Cryogels: Macroporous Gels with Remarkable Properties; Okay, O., Ed.; Springer International Publishing: Basel, Switzerland, 2014; Volume 263, pp. 103–157.
  17. Asliyüce, S.; Bereli, N.; Uzun, L.; Onur, M.A.; Say, R.; Denizli, A. Ion-imprinted supermacroporous cryogel, for in vitro removal of iron out of human plasma with beta thalassemia. Sep. Purif. Technol. 2010, 73, 243–249.
  18. Çimen, D.; Denizli, A. Immobilize Metal Affinity Monolithic Cryogels for Cytochrome C Purification. Colloids Surf. B. 2012, 93, 29–35.
  19. Kumari, J.; Kumar, A. Development of polymer based cryogel matrix for transportation and storage of mammalian cells. Sci. Rep. 2017, 7, 41551.
  20. Jain, E.; Karande, A.A.; Kumar, A. Supermacroporous polymer-based cryogel bioreactor for monoclonal antibody production in continuous culture using hybridoma cells. Biotechnol. Prog. 2011, 27, 170–180.
  21. Carvalho, B.M.A.; Da Silva, S.L.; Da Silva, L.H.M.; Minim, V.P.R.; Da Silva, M.C.H.; Carvalho, L.M. Cryogel Poly(acrylamide): Synthesis, Structure and Applications. Sep. Purif. Rev. 2014, 43, 241–262.
  22. Çimen, D.; Bereli, N.; Andaç, M.; Denizli, A. Molecularly imprinted cryogel columns for Concanavalin A purification from jack bean extract. Sep. Sci. Plus. 2018, 1, 454–463.
  23. Plieva, F.M.; Karlsson, M.; Aguilar, M.R.; Gomez, D.; Mikhalovsky, S.; Galaev, I.Y. Pore structure in supermacroporous polyacrylamide based cryogels. Soft Matter. 2005, 1, 303–309.
  24. Gun’ko, V.M.; Savina, I.N.; Mikhalovsky, S.V. Cryogels: Morphological, structural and adsorption characterisation. Adv. Coll. Int. Sci. 2013, 187, 1–46.
  25. Bereli, N.; Saylan, Y.; Uzun, L.; Say, R.; Denizli, A. L-Histidine imprinted supermacroporous cryogels for protein recognition. Sep. Purif. Technol. 2011, 82, 28–35.
  26. Inanan, T.; Tüzmen, N.; Karipcin, F. Oxime-functionalized cryogel disks for catalase immobilization. Int. J. Biol. Macromol. 2018, 114, 812–820.
  27. Koshy, S.T.; Ferrante, T.C.; Lewin, S.A.; Mooney, D.J. Injectable, Porous, and Cell-Responsive Gelatin Cryogels. Biomaterials 2014, 35, 2477–2487.
  28. Singh, N.K.; Dsouza, R.N.; Grasselli, M.; Fernández-Lahore, M. High capacity cryogel-type adsorbents for protein purification. J. Chromatogr. A 2014, 1355, 143–148.
  29. Kuo, C.Y.; Chen, C.H.; Hsiao, C.Y.; Chen, J.P. Incorporation of chitosan in biomimetic gelatin/chondroitin- 6-sulfate/hyaluronan cryogel for cartilage tissue engineering. Carbohydr. Polym. 2015, 117, 722–730.
  30. Baydemir, G.; Bereli, N.; Andaç, M.; Say, R.; Galaev, I.Y.; Denizli, A. Supermacroporous poly(hydroxyethyl methacrylate) based cryogel with embedded bilirubin imprinted particles. React. Funct. Polym. 2009, 69, 36–42.
  31. Zhao, S.; Wang, D.; Zhu, S.; Liu, X.; Zhang, H. 3D cryogel composites as adsorbent for isolation of protein and small molecules. Talanta 2019, 191, 229–234.
  32. Çimen, D.; Yılmaz, F.; Perçin, I.; Türkmen, D.; Denizli, A. Dye affinity cryogels for plasmid DNA purification. Mater. Sci. Eng. C 2015, 56, 318–324.
  33. Wang, B.H.; Campbell, G. Campbell, G. Formulations of polyvinyl alcohol cryogel that mimic the biomechanical properties of soft tissues in the natural lumbar intervertebral disc. Spine 2009, 34, 2745–2753.
  34. O’Brien, F.J. Biomaterials scaffolds for tissue engineering. Mater. Today 2011, 14, 88–95.
  35. Bakhshpour, M.; Idil, N.; Perçin, I.; Adil Denizli, A. Biomedical Applications of Polymeric Cryogels. Appl. Sci. 2019, 9, 553.
  36. Bereli, N.; Yavuz, H.; Denizli, A. Protein chromatography by molecular imprinted cryogels. J. Liq Chrom. Relat. Tech. 2020, 43, 657–670.
  37. Lozinsky, V.I.; Galaev, I.Y.; Plieva, F.M.; Savina, I.N.; Jungvid, H.; Mattiasson, B. Polymeric cryogels as promising materials of biotechnological interest. Trends Biotechnol. 2003, 21, 445–451.
  38. Hacker, M.C.; Nawaz, H.A. Multi-functional macromers for hydrogel design in biomedical engineering and regenerative medicine. Int. J. Mol. Sci. 2015, 16, 27677–27706.
  39. Erdem, A.; Ngwabebhoh, F.A.; Yildiz, U. Fabrication and characterization of soft macroporous Jeffamine cryogels as potential materials for tissue applications. RSC Adv. 2016, 6, 111872–111881.
  40. Konovalova, M.V.; Markov, P.A.; Durnev, E.A.; Kurek, D.V.; Popov, S.V.; Varlamov, V.P. Preparation and biocompatibility evaluation of pectin and chitosan cryogels for biomedical application. J. Biomed. Mater. Res. 2017, 105, 547–556.
  41. Savina, I.N.; Ingavle, G.C.; Cundy, A.B.; Mikhalovsky, S.V. A simple method for the production of large volume 3D macroporous hydrogels for advanced biotechnological, medical and environmental applications. Sci. Rep. 2016, 6, 1–9.
  42. Yavuz, H.; Bereli, N.; Baydemir, G.; Andaç, M.; Türkmen, D.; Denizli, A. Cryogels: Applications in Extracorporeal Affinity Therapy. In Supermacroporous Cryogels: Biomedical and Biotechnological Applications; Kumar, A., Ed.; CRC Press: Boca Raton, FL, USA, 2016; pp. 397–416.
  43. Bhat, S.; Kumar, A. Biomaterials and bioengineering tomorrow’s healthcare. Biomatter. 2013, 3, e24717.
  44. Cheng, L.; Ji, K.; Shih, T.Y.; Haddad, A.; Giatsidis, G.; Mooney, D.J.; Orgill, D.P.; Nabzdyk, C.S. Injectable shape-memorizing three-dimensional hyaluronic acid cryogels for skin sculpting and soft tissue reconstruction. Tissue Eng. Part A 2017, 23, 243–251.
  45. Kim, I.; Lee, S.S.; Bae, S.; Lee, H.; Hwang, N.S. Heparin functionalized injectable cryogel with rapid shape-recovery property for neovascularization. Biomacromolecules 2018, 19, 2257–2269.
  46. Chew, S.A.; Danti, S. Biomaterial-based implantable devices for cancer therapy. Adv. Healthc. Mater. 2017, 6, 1600766.
  47. Kearney, C.J.; Mooney, D.J. Macroscale delivery systems for molecular and cellular payloads. Nat. Mater. 2013, 12, 1004–1017.
  48. Chen, M.H.; Wang, L.L.; Chung, J.J.; Kim, Y.H.; Atluri, P.; Burdick, J.A. Methods to assess shear-thinning hydrogels for application as injectable biomaterials. ACS Biomater. Sci. Eng. 2017, 3, 3146–3160.
  49. Willerth, S.M.; Sakiyama-Elbert, S.E. Combining stem cells and biomaterial scaffolds for constructing tissues and cell delivery. StemJournal. 2019, 1, 1–25.
  50. Tan, H.; Marra, K.G. Injectable, biodegradable hydrogels for tissue engineering applications. Materials 2010, 3, 1746–1767.
  51. Rezaeeyazdi, M.; Colombani, T.; Memic, A.; Bencherif, S.A. Injectable hyaluronic acid-co-gelatin cryogels for tissue-engineering applications. Materials 2018, 11, 1374.
  52. Demir, D.; Boelgen, N. Synthesis and characterization of injectable chitosan cryogel microsphere scaffolds. Int. J. Polym. Mater. Pol. 2017, 66, 686–696.
  53. Lei, K.; Tang, L. Surgery-free injectable macroscale biomaterials for local cancer immunotherapy. Biomater. Sci. 2019, 7, 733.
  54. Patenaude, M.; Smeets, N.M.; Hoare, T. Designing injectable, covalently cross-linked hydrogels for biomedical applications. Macromol. Rapid Commun. 2014, 35, 598–617.
  55. Cloyd, J.M.; Malhotra, N.R.; Weng, L.; Chen, W.; Mauck, R.L.; Elliott, D.M. Material Properties in Unconfined Compression of Human Nucleus Pulposus, Injectable Hyaluronic Acid-Based Hydrogels and Tissue Engineering Scaffolds. Eur. Spine J. 2007, 16, 1892–1898.
  56. Schirmer, L.; Hoornaert, C.; Le Blon, D.; Eigel, D.; Neto, C.; Gumbleton, M.; Welzel, P.B.; Rosser, A.E.; Werner, C.; Ponsaerts, P.; et al. Heparin-based, injectable microcarriers for controlled delivery of interleukin-13 to the brain. Biomater. Sci. 2020, 8, 4997.
  57. Goodarzi, K.; Shariatzadeh, F.J.; Solouk, A.; Akbari, S.; Mirzadeh, H. Injectable drug loaded gelatin based scaffolds as minimally invasive approach for drug delivery system: CNC/PAMAM nanoparticles. Eur. Polym. J. 2020, 139, 109992.
  58. Nikolova, M.P.; Chavali, M.S. Recent advances in biomaterials for 3D scaffolds: A review. Bioact. Mater. 2019, 4, 271–292.
  59. Hixon, K.R.; Eberlin, C.T.; Kadakia, P.U.; McBride-Gagyi, S.H.; Jain, E.; Sell, S.A. A comparison of cryogel scaffolds to identify an appropriate structure for promoting bone regeneration. Biomed. Phys. Eng. Exp. 2018, 4, 035014.
  60. Koshy, S.T.; Zhang, D.K.Y.; Grolman, J.M.; Stafford, A.G.; Mooney, D.J. Injectable nanocomposite cryogels for versatile protein drug delivery. Acta Biomater. 2018, 65, 36–43.
  61. Bencherif, S.A.; Sands, R.W.; Ali, O.A.; Li, W.A.; Lewin, S.A.; Braschler, T.M.; Shih, T.Y.; Verbeke, C.S.; Bhatta, D.; Dranoff, G.; et al. Injectable cryogel-based whole-cell cancer vaccines. Nat. Commun. 2015, 6, 7556.
More
Information
Contributor MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register :
View Times: 498
Revisions: 2 times (View History)
Update Date: 01 Jun 2021
1000/1000