Topic Review
Microgrid Applications
Microgrids need control and management at different levels to allow the inclusion of renewable energy sources. In this paper, a comprehensive literature review is presented to analyse the latest trends in research and development referring to the applications of predictive control in microgrids. As a result of this review, it was found that the application of predictive control techniques on microgrids is performed for the three control levels and with adaptations of the models in order to include uncertainties to improve their performance and dynamics response. In addition, to ensure system stability, but also, at higher control levels, coordinated operation among the microgrid’s components and synchronised and optimised operation with utility grids and electric power markets. Predictive control appears as a very promising control scheme with several advantages for microgrid applications of different control levels.
  • 2.7K
  • 28 Oct 2020
Topic Review
Driving Mechanisms/Motion of Screw Drive
In recent years, interest in in-pipe robot research has been steadily increasing. This phenomenon reflects the necessity and urgency of pipe inspection and rehabilitation as several pipe networks have become outdated around the globe. In-pipe robots can be divided into several groups in accordance with their locomotion principles, each with its own advantages and best suited application scope. Research on the screw drive in-pipe robot (SDIR) has had a rising trend due to the robot’s simple driving mechanism design and numerous advantages. 
  • 2.5K
  • 09 Nov 2020
Topic Review
HVAC Systems of Smart Building
Early fault detection and diagnosis in heating, ventilation and air conditioning (HVAC) systems may reduce the damage of equipment, improving the reliability and safety of smart buildings, generating social and economic benefits. Data models for fault detection and diagnosis are increasingly used for extracting knowledge in the supervisory tasks. This article proposes an autonomic cycle of data analysis tasks (ACODAT) for the supervision of the building’s HVAC systems. Data analysis tasks incorporate data mining models for extracting knowledge from the system monitoring, analyzing abnormal situations and automatically identifying and taking corrective actions. This article shows a case study of a real building’s HVAC system, for the supervision with our ACODAT, where the HVAC subsystems have been installed over the years, providing a good example of a heterogeneous facility. The proposed supervisory functionality of the HVAC system is capable of detecting deviations, such as faults or gradual increment of energy consumption in similar working conditions. The case study shows this capability of the supervisory autonomic cycle, usually a key objective for smart buildings.
  • 2.5K
  • 01 Jun 2021
Topic Review
Single-Zone HVAC Systems
Single-zone HVAC systems are installed in most residential buildings, which implies regulating all the rooms of the house with a single thermostat and with static ventilation registers.
  • 2.3K
  • 27 Oct 2020
Topic Review
Digital Twins in Automotive Industry
A digital twin is a nonphysical model that has been designed in order to accurately reflect an artificial or physical system, where sensors are placed to acquire a variety of data regarding different aspects concerning the performance of the system.
  • 2.1K
  • 13 Jul 2022
Topic Review
Internet of Everything (IoE) Taxonomies
The paradigm of the Internet of everything (IoE) is advancing toward enriching people’s lives by adding value to the Internet of things (IoT), with connections among people, processes, data, and things. This paper provides a survey of the literature on IoE research, highlighting concerns in terms of intelligence services and knowledge creation. The significant contributions of this study are as follows: (1) a systematic literature review of IoE taxonomies (including IoT); (2) development of a taxonomy to guide the identification of critical knowledge in IoE applications, an in-depth classification of IoE enablers (sensors and actuators); (3) validation of the defined taxonomy with 50 IoE applications; and (4) identification of issues and challenges in existing IoE applications (using the defined taxonomy) with regard to insights about knowledge processes.
  • 2.1K
  • 27 Jan 2021
Topic Review
Information and Communication Technology
Information and Communication Technology (ICT) is seen as a way to enhance knowledge collection in the construction sector. Although the theoretical benefits of ICT implementation have been clarified, realizing such benefits is insufficient. This paper attempted a systematic analysis of the literature using ATLAS.ti 9 software to save, identify, and analyze this study’s data. A total of 102 articles were actively reviewed, including 82 Scopus journals and 20 conference papers published from 2003 to 2020. In this article, from a construction industry point of view, the ICT adoption process is considered as an interaction between technology, task, and an individual from a construction industry perspective. While ICT is acknowledged as a source of aggressive gain by both practitioners and scholars, ICT’s sole presence would definitely not guarantee achievement in the industry’s ICT approval. Companies cannot grasp the full benefits of ICT, except that users are able to adopt the technology. Hence, the issues related to ICT adoption need to be examined.
  • 2.0K
  • 13 Nov 2020
Topic Review
Unlicensed Massive Machine Type Communications
Machine-type communications (MTC) is a non-human centric concept introduced under the umbrella of IoT for the future communications technology, 5G, which can support a high number of connectivity in the network and can provide different quality of services.
  • 1.8K
  • 30 Oct 2020
Topic Review
Architecture of Dima System
One of the most recent manifestations of avionics system is Distributed Integrated Modular Avionics (DIMA).  The study of DIMA architecture is essential when considering two levels of mappings, that is (1) software modules to hardware components, and (2) hardware components to installation locations. This entry describes the hierarchical design of DIMA, including system layer, hardware layer and installation layer that are linked with a group of constraints and quality measures.
  • 1.8K
  • 26 Apr 2020
Topic Review
Application of Gas Foil Bearings
Gas foil bearing has been widely used in high-speed turbo machinery due to its oil-free, wide temperature range, low cost, high adaptability, high stability and environmental friendliness. In this paper, state-of-the-art investigations of gas foil bearings are reviewed, mainly on the development of the high-speed turbo machinery in China. After decades of development, progress has been achieved in the field of gas foil bearing in China. Small-scale applications of gas foil bearing have been realized in a variety of high-speed turbo machinery. The prospects and markets of high-speed turbo machinery are very broad. Various high-speed turbomachines with gas foil bearings have been developed. Due to the different application occasions, higher reliability requirements are imposed on the foil bearing technology. Therefore, its design principle, theory, and manufacturing technology should be adaptive to new application occasions before mass production. Thus, there are still a number of inherent challenges that must be addressed, for example, thermal management, rotor-dynamic stability and wear-resistant coatings.
  • 1.7K
  • 16 Jul 2021
  • Page
  • of
  • 18