Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Hottest Latest Alphabetical (A-Z) Alphabetical (Z-A)
Type:
All Topic Review Biography
Topic Review
Zirconium Carbide for Hypersonic Applications
At ultra-high temperatures, resilient, durable, stable material choices are limited. While Carbon/Carbon (C/C) composites (carbon fibers and carbon matrix phases) are the materials of choice, zirconium carbide (ZrC) provides an option in hypersonic environments and specifically in wing leading edge (WLE) applications. 
  • 230
  • 08 Oct 2023
Topic Review
Zirconia-Based Ceramics Reinforced by Carbon Nanotubes
The use of CNTs (carbon nanotubes) as a secondary phase in a zirconia matrix is motivated by their outstanding crack self-healing ability, the possibility to tailor the desired nano-structural properties, and their exceptional wear behavior. Therefore, a detailed investigation into CNT features has been provided. The debate of using the different Vickers indentation fracture toughness equations to estimate the resistance of crack propagation was critically reviewed according to crack characteristics.
  • 203
  • 16 Aug 2023
Topic Review
XPS Study Calcining Mixtures of Brucite with Titania
The X-ray stimulation photospectrometry technique known as XPS is applied to determine chemical bond characteristics of organic and inorganic substances. On the other hand, the processes of chemical substance formation can be energetically activated by various mechanisms, one of them being thermal activation. Magnesium oxide (magnesia, MgO) and titanium oxide (titania, TiO2) are substances that, due to their chemical and energetic nature, can chemically react to form other chemical compounds when subjected to relatively high temperatures. During the sintering of MgO it is feasible to use some additives such as TiO2 to improve some properties, but during the process it is possible the formation of substances that limit its final application at high temperature. This review focuses on the relatively high-temperature synthesis and characterization of compounds based on MgO:TiO2 in a 50:50 wt% ratio, using the XPS technique and supported by XRD.
  • 1.1K
  • 22 Mar 2022
Topic Review
Unfired Clay Bricks
Bricks are typically made through the high-temperature firing process or by stabilizing the mixture with binders such as lime and cement. These bricks have a large carbon footprint and high levels of grey energy. In many parts of the world, the excessive use of clay as a natural raw material for the production of conventional bricks will lead to its scarcity. The mixing of clay with lignocellulosic ash during brick manufacturing leads to a better and more reliable solution that conserves scarce natural resources and reduces the impact of environmental pollution. 
  • 1.4K
  • 31 Oct 2022
Biography
Tushar Kanti Das Roy
Tushar K. Das Roy, researcher and technologist, science popularizer, entrepreneur, was born in Bangladesh, India. He graduated from the University of Calcutta, India, where he received his Engineering Degree, later moved to Berlin, Germany and there he obtained his Diplomm-Ingenierung at the University of Berlin, Germany; his title of Dr.-Ing. he got it from TU-Clausthal, Germany. He worked
  • 774
  • 02 Apr 2023
Topic Review
Thin-Film Fabrication for Low-Temperature Solid Oxide Fuel Cells
Solid oxide fuel cells (SOFCs) are amongst the most widely used renewable alternative energy systems with near-zero carbon emission, high efficiency, and environment-friendly features. However, the high operating temperature of SOFCs is still considered a major challenge due to several issues regarding the materials’ corrosion, unwanted reactions between layers, etc. Thus, low-temperature SOFCs (LT-SOFCs) have gained significant interest during the past decades. Despite the numerous advantages of LT-SOFCs, material selection for each layer is of great importance as the common materials have not shown a desirable performance so far. In addition to the selection of the materials, fabrication techniques have a great influence on the properties of the SOFCs. As SOFCs with thinner layers showed lower polarisation resistance, especially in the electrolyte layer, different thin-film fabrication methods have been employed, and their effect on the overall performance of SOFCs has been evaluated.
  • 292
  • 23 Aug 2023
Topic Review
Thermoelectric Oxide Ceramics and Devices
Thermoelectric materials have gained wide attention to realize multilevel efficient energy management to alleviate the increasingly severe energy crisis. Oxide ceramics were well-explored as potential thermoelectric candidates because of their outstanding merits, including abundance, eco-friendliness, high-temperature stability, and chemical stability. A comprehensive summary of the diversified state-of-the-art oxide ceramics and establish the links between composition designing, preparation process, structural characteristics, and properties to summarize the underlying chemistry and physics mechanism of band engineering, doping, composited with the second phase, defects engineering, and entropy engineering is provided. Furthermore, advanced device design and applications such as thermoelectric modules, miniature generators, sensors, and coolers were summarized. Ultimately, the challenges and future perspective of oxides ceramics for the device design and thermoelectric applications in the development of energy harvesting technology have been prospected.
  • 221
  • 07 Sep 2023
Topic Review
Therapeutic Bioapplications with Layered Double Hydroxides Nanohybrids
Cancer treatment using layered double hydroxides nanohybrids for bioimaging and therapy has been researched for enhanced clinical methods. In the case of tumor targeting and cancer therapy based on biomedical materials, synergistic combinations of therapy and bioimaging have been applied for the diagnosis and treatment of cancer at once
  • 323
  • 28 Nov 2022
Topic Review
Tailoring of Hierarchical Porous Freeze Foam Structures
Freeze Foaming is a method to manufacture cellular ceramic scaffolds with a hierarchical porous structure. These so-called Freeze Foams are predestined for the use as bone replacement material because of their internal bone-like structure and biocompatibility. On the one hand, they consist of macrostructural foam cells which are formed by the expansion of gas inside the starting suspension. On the other hand, a porous microstructure inside the foam struts is formed during freezing and subsequent freeze drying of the foamed suspension. The aim of this work is to investigate for the first time the formation of macrostructure and microstructure separately depending on the composition of the suspension and the pressure reduction rate, by means of appropriate characterization methods for the different pore size ranges. Moreover, the foaming behavior itself was characterized by in-situ radiographical and computed tomography (CT) evaluation. As a result, it could be shown that it is possible to tune the macro- and microstructure separately with porosities of 49–74% related to the foam cells and 10–37% inside the struts.
  • 321
  • 07 Feb 2022
Topic Review
Sustainable Synthesis of MXenes
MXenes provide a major drawback involving environmentally harmful and toxic substances for its general fabrication in large-scale production and employing a high-temperature solid-state reaction followed by selective etching. Meanwhile, how MXenes are synthesized is essential in directing their end uses. Therefore, making strategic approaches to synthesize greener, safer, more sustainable, and more environmentally friendly MXenes is imperative to commercialize at a competitive price. 
  • 627
  • 17 Jan 2023
  • Page
  • of
  • 7
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Fungi
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Feedback