Topic Review
Energy Management Strategy
A Comprehensive Review on Classification, Energy Management Strategy, and Control Algorithm for Hybrid Electric Vehicles
  • 13.9K
  • 22 Oct 2020
Topic Review
Vehicular Ad Hoc Networks
The vehicular ad hoc network is an emerging area of technology that provides intelligent transportation systems with vast advantages and applications. Frequent disconnections between the vehicular nodes due to high-velocity vehicles impact network performance. 
  • 10.7K
  • 27 Sep 2022
Topic Review
Radar Signal Processing Fundamentals
Knowledge of radar signal processing is essential for the development of a deep radar perception system. Different radar devices vary in their sensing capabilities. It is important to leverage radar domain knowledge to understand the performance boundary, find key scenarios, and solve critical problems. 
  • 9.1K
  • 08 Jun 2022
Topic Review
Battery Management System Subsystems and Their Influence
As the battery provides the entire propulsion power in electric vehicles (EVs), the utmost importance should be ascribed to the battery management system (BMS) which controls all the activities associated with the battery. 
  • 8.4K
  • 28 Jun 2022
Topic Review
Charging Technology for Battery Electric Buses
The charging infrastructure has a key role in the implementation of battery electric buses (BEBs) in cities. BEBs only use off-board chargers, whereas the PEC to convert the three-phase AC power from the grid into DC power to charge the battery is located outside the BEB. These chargers allow higher charging power levels because they are not restricted in size and weight. Furthermore, since the driving range of a BEB is limited, a specific charging concept and interface is required to keep the BEB running during the day. This entry gives an overview of the existing charging interfaces and concepts and charger and PEC topologies to provide a reliable and efficient charging behavior.
  • 6.8K
  • 18 Nov 2021
Topic Review
Electric Vehicle Charger Cybersecurity Vulnerabilities
Worldwide growth in electric vehicle use is prompting new installations of private and public electric vehicle supply equipment (EVSE). EVSE devices support the electrification of the transportation industry but also represent a linchpin for power systems and transportation infrastructures. Cybersecurity researchers have identified several vulnerabilities that exist in EVSE devices, communications to electric vehicles (EVs), and upstream services, such as EVSE vendor cloud services, third-party systems, and grid operators. 
  • 4.4K
  • 02 Jun 2022
Topic Review Peer Reviewed
Automobile Tires’ High-Carbon Steel Wire
It is a well-known fact that to manufacture an automobile tire more than 200 different materials are used, including high-carbon steel wire. In order to withstand the affecting forces, the tire tread is reinforced with steel wire or other products such as ropes or strands. These ropes are called steel cord. Steel cord can be of different constructions. To ensure a good adhesive bond between the rubber of the tire and the steel cord, the cord is either brass-plated or bronzed. The reason brass or bronze is used is because copper, which is a part of these alloys, makes a high-strength chemical composition with sulfur in rubber. For steel cord, the high carbon steel is usually used at 0.70–0.95% C. This amount of carbon ensures the high strength of the steel cord. This kind of high-quality, unalloyed steel has a pearlitic structure which is designed for multi-pass drawing. To ensure the specified technical characteristics, modern metal reinforcing materials for automobile tires, metal cord and bead wire, must withstand, first of all, a high breaking load with a minimum running meter weight. At present, reinforcing materials of the strength range 2800–3200 MPa are increasingly used, the manufacture of which requires high-strength wire. The production of such wire requires the use of a workpiece with high carbon content, changing the drawing regimes, patenting, and other operations. At the same time, it is necessary to achieve a reduction in the cost of wire manufacturing. In this context, the development and implementation of competitive processes for the manufacture of high-quality, high-strength wire as a reinforcing material for automobile tires is an urgent task.
  • 4.4K
  • 13 Apr 2022
Topic Review
Cost–Benefit Analysis for Road Infrastructure Projects
Cost–benefit analysis (CBA) is considered an effective evaluation method for fostering optimal decision-making and ranking of road infrastructures over decades. Eight distinct modelling categories used for CBA implementation were determined, each encompassing three different modelling approaches for capturing the data risk assessment (deterministic or probabilistic), CBA’s parameters interactive behavior (static or dynamic) and the considered economies (microeconomic or macroeconomic). In-depth content analysis led to the interpretation of the current status of extant models and the identification of three main knowledge gaps: the absence of the CBA’s inputs updating into a probabilistic environment, the deficiency of a dynamic interdependent framework and the necessity of homogenous cost datasets for road projects. Future research directions and a conceptual framework for modelling CBA into a microeconomic, probabilistic and dynamic environment are proposed providing decision-makers with new avenues for more reliable CBA modelling.
  • 4.3K
  • 29 Jan 2023
Topic Review Peer Reviewed
High-Speed Railway
Union Internationale des Chemins (UIC) defines the high-speed railway (HSR) as a high-speed railway system that contains the infrastructure and the rolling stock. The infrastructure can be newly built dedicated lines enabled for trains to travel with speed above 250 km/h or upgraded conventional lines with a speed up to 200 or even 220 km/h. HSR requires specially built trains with increased power to weight ratio and must have an in-cab signalling system as traditional signalling systems are incapable of above 200 km/h.
  • 3.5K
  • 18 Apr 2022
Topic Review
End-of-Life Vehicles Recycling
End-of-life vehicle (ELV) recycling is a process that spends energy and could be an energy source as well. This part of energy recovering depends on many different factors related to the broad and local aspects of ELV recycling. The ELV recycling process is consuming energy from different energy sources (electrical, fossil), however, this consumption is lower in relation to energy consumption during the production of new vehicle parts from the very beginning. ELVs have, in the first phase, been considered as an environmental problem, which must be solved through many decision-making approaches, directives, and standards. Accordingly, it may be concluded, that this issue is very complex since it includes a lot of relations concerning ELV recycling, as well as broad infrastructure and socio-economic environment factors. On the other hand, there is not enough relevant and reliable information related to the ELV recycling and energy recovery through ELV recycling process. This information can be obtained through user responses, financial analysis, business analysis, or some government body relevant information sources. Due to new regulations related to ELV recycling, the responsibility of manufacturers is becoming increasingly important. They are obligated to design and revise their processes and adapt them to new legislation norms.
  • 3.3K
  • 26 Oct 2020
Topic Review
Early Injection for Low Emissions
Low-emission and high-efficiency have always been the targets for Internal Combustion Engine development. For diesel engines, homogeneous charge (aka. HCCI) and premixed charge (aka. PCCI) combustion modes provide both low-emission and high-efficiency simultaneously. To achieve these advanced combustion modes, early injection is needed as a relatively longer air-fuel mixing time is guaranteed. Several key parameters, such as the injection timing, pressure, angle, directly determine the final combustion process and thus the emission and efficiency performance. The pros and cons of these key parameters are discussed in detail here to provide a good review of the early-injection strategy.
  • 3.2K
  • 28 Oct 2020
Topic Review Peer Reviewed
Geometric Design of Suburban Roundabouts
A modern roundabout is an intersection with a circulatory roadway at which the vehicle speed is low, and the traffic is continuous and circulating in one direction around the central island towards the exits at the approach legs. Modern roundabout design is an iterative process that is composed of the following steps: (1) the identification of the roundabout as the optimal traffic solution; (2) the definition of the number of lanes at the intersection based on the required capacity and the level of service; (3) the initial design of the roundabout geometry; (4) design vehicle swept path, the fastest path analysis, and visibility performance checks; and (5) detailed roundabout design if the results of the performance checks are in line with the design recommendations. Initial roundabout geometry design elements are not independent of each other; therefore, care must be taken to provide compatibility between them. An overview and a comparative analysis of the initial geometric design elements for suburban single-lane roundabouts defined in roundabout design guidelines and norms used in Croatia, Austria, France, the Netherlands, Germany, Serbia, and Switzerland is given in this entry.
  • 2.8K
  • 13 Apr 2022
Topic Review
Resistance of PVD Coatings
Due to the increasing maintenance costs of hydraulic machines related to the damages caused by cavitation erosion and/or erosion of solid particles, as well as in tribological connections, surface protection of these components is very important. Up to now, numerous investigations of resistance of coatings, mainly nitride coatings, such as CrN, TiN, TiCN, (Ti,Cr)N coatings and multilayer TiN/Ti, ZrN/CrN and TN/(Ti,Al)N coatings, produced by physical vapor deposition (PVD) method using different techniques of deposition, such as magnetron sputtering, arc evaporation or ion plating, to cavitation erosion, solid particle erosion and wear have been made. The results of these investigations, degradation processes and main test devices used are presented in this paper. An effect of deposition of mono- and multi-layer PVD coatings on duration of incubation period, cumulative weight loss and erosion rate, as well as on wear rate and coefficient of friction in tribological tests is discussed. It is shown that PVD coating does not always provide extended incubation time and/or improved resistance to mentioned types of damage. The influence of structure, hardness, residence to plastic deformation and stresses in the coatings on erosion and wear resistance is discussed. In the case of cavitation erosion and solid particle erosion, a limit value of the ratio of hardness (H) to Young’s modulus (E) exists at which the best resistance is gained. In the case of tribological tests, the higher the H/E ratio and the lower the coefficient of friction, the lower the wear rate, but there are also many exceptions
  • 2.7K
  • 13 Oct 2020
Topic Review
Diamond-Like Carbon Films
Diamond-like carbon (DLC) films have been extensively applied in industries owing to their excellent characteristics such as high hardness. In particular, there is a growing demand for their use as protective films for mechanical parts owing to their excellent wear resistance and low friction coefficient. DLC films have been deposited by various methods and many deviate from the DLC regions present in the ternary diagrams proposed for sp3 covalent carbon, sp2 covalent carbon, and hydrogen. Consequently, redefining the DLC region on ternary diagrams using DLC coatings for mechanical and electrical components is urgently required. Therefore, we investigate the sp3 ratio, hydrogen content, and other properties of 74 types of amorphous carbon films and present the classification of amorphous carbon films, including DLC. We measured the sp3 ratios and hydrogen content using near-edge X-ray absorption fine structure and Rutherford backscattering-elastic recoil detection analysis under unified conditions. Amorphous carbon films were widely found with nonuniform distribution. The number of carbon atoms in the sp3 covalent carbon without bonding with hydrogen and the logarithm of the hydrogen content were inversely proportional. Further, we elucidated the DLC regions on the ternary diagram, classified the amorphous carbon films, and summarized the characteristics and applications of each type of DLC.
  • 2.6K
  • 28 Sep 2021
Topic Review
Autonomous Vehicles
An Autonomous Vehicle (AV), or a driverless car, or a self-driving vehicle is a car, bus, truck, or any other vehicle that is able to drive from point A to point B and perform all necessary driving functions, without any human intervention. An Autonomous Vehicle is normally equipped with different types of sensors to perceive the surrounding environment, including Normal Vision Cameras, Infrared Cameras, RADAR, LiDAR, and Ultrasonic Sensors.  An autonomous vehicle should be able to detect and recognise all type of road users including surrounding vehicles, pedestrians, cyclists, traffic signs, road markings, and can segment the free spaces, intersections, buildings, and trees to perform a safe driving task.  Currently, no realistic prediction expects we see fully autonomous vehicles earlier than 2030. 
  • 2.4K
  • 11 Feb 2021
Topic Review
Reversible Hydrogen Storage
In the field of energy storage, recently investigated nanocomposites show promise in terms of high hydrogen uptake and release with enhancement in the reaction kinetics. Among several, carbonaceous nanovariants like carbon nanotubes (CNTs), fullerenes, and graphitic nanofibers reveal reversible hydrogen sorption characteristics at 77 K, due to their van der Waals interaction. The spillover mechanism combining Pd nanoparticles on the host metal-organic framework (MOF) show at room temperature uptake of hydrogen. Metal or complex hydrides either in the nanocomposite form and its subset, nanocatalyst dispersed alloy phases illustrate the concept of nanoengineering and nanoconfinement of particles with tailor-made properties for reversible hydrogen storage. Another class of materials comprising polymeric nanostructures such as conducting polyaniline and their functionalized nanocomposites are versatile hydrogen storage materials because of their unique size, high specific surface-area, pore-volume, and bulk properties. The salient features of nanocomposite materials for reversible hydrogen storage are reviewed and discussed.
  • 2.3K
  • 22 Jul 2020
Topic Review
Advantages and Disadvantages of Hydrogen Trains
Hydrogen and electric drives used in various means of transport is a leading topic in many respects.
  • 2.3K
  • 07 Oct 2023
Topic Review
Bus Scheduling with Evolutionary Optimization
In public transport operations, vehicles tend to bunch together due to the instability of passenger demand and traffic conditions. Fluctuation of the expected waiting times of passengers at bus stops due to bus bunching is perceived as service unreliability and degrades the overall quality of service. For assessing the performance of high-frequency bus services, transportation authorities monitor the daily operations via Transit Management Systems (TMS) that collect vehicle positioning information in near real-time. This work explores the potential of using Automated Vehicle Location (AVL) data from the running vehicles for generating bus schedules that improve the service reliability and conform to various regulatory constraints. The computer-aided generation of optimal bus schedules is a tedious task due to the nonlinear and multi-variable nature of the bus scheduling problem. For this reason, this work develops a two-level approach where (i) the regulatory constraints are satisfied and (ii) the waiting times of passengers are optimized with the introduction of an evolutionary algorithm. This work also discusses the experimental results from the implementation of such an approach in a bi-directional bus line operated by a major bus operator in northern Europe.
  • 2.2K
  • 29 Oct 2020
Topic Review
Additive Manufacturing Technology in Railway Infrastructure Systems
Additive manufacturing technologies, well known as three-dimensional printing (3DP) technologies, have been applied in many industrial fields, including aerospace, automobiles, shipbuilding, civil engineering and nuclear power. However, despite the high material utilization and the ability to rapidly construct complex shaped structures of 3D printing technologies, the application of additive manufacturing technologies in railway track infrastructure is still at the exploratory stage. 
  • 2.2K
  • 07 Jan 2022
Topic Review
A Low-Cost, Flexible Pressure Capacitor Sensor using Polyurethane for Wireless Vehicle Detection
Detection of vehicles on the road can contribute to the establishment of an intelligent transportation management system to allow smooth transportation and the reduction of road accidents. Thus far, an efficient and low-cost polymer flexible pressure sensor for vehicle detection is lacking. This paper presents a flexible sensor for vehicle sensing and demonstrates a wireless system for monitoring vehicles on the road. A vehicle sensor is fabricated by sandwiching a polyurethane material between Aluminum top/bottom electrodes. The sensing mechanism is based on changes in capacitance due to variation in the distance between the two electrodes at an applied external pressure. A clear response against a pressure load of 0.65 Mpa is observed, which is the same pressure as that of the car tire area in contact with the road. Significantly, the sensor is easy to embed on the road line due to its mechanical flexibility and large size. A field test is carried out by embedding the sensor on the road and crossing the sensor with a car. Moreover, the signal displayed on the tablet indicates that the sensing system can be used for wireless detection of the axle, speed, or weight of the vehicle on the road. The findings suggest that the flexible pressure sensor is a promising tool for use as a low-cost vehicle detector in future intelligent transportation management.
  • 2.2K
  • 28 Oct 2020
  • Page
  • of
  • 9
ScholarVision Creations