Subject:
All Disciplines Arts & Humanities Biology & Life Sciences Business & Economics Chemistry & Materials Science Computer Science & Mathematics Engineering Environmental & Earth Sciences Medicine & Pharmacology Physical Sciences Public Health & Healthcare Social Sciences
Sort:
Most Viewed Latest Alphabetical (A-Z) Alphabetical (Z-A)
Filter:
All Topic Review Biography Peer Reviewed Entry Video Entry
Topic Review
Fluid Catalytic Cracking Catalyst Regeneration Intensification Technologies
Fluid catalytic cracking (FCC) is the workhorse of modern crude oil refinery. Its regenerator component plays a critical role in optimizing the overall profitability by efficiently restoring the catalyst activity and enhancing the heat balance in the riser reactor. Improvement in the device metallurgy and process operations have enabled industrial regenerators to operate at high temperatures with a better coke burning rate and longer operating cycle. Today, the carbon content of regenerated catalyst has drastically reduced to less than 0.1 wt.%.
  • 6.6K
  • 15 Mar 2022
Topic Review
Design Considerations of Fixed and Floating Offshore Structures
Offshore structures exist in a variety of forms, and they are used for a variety of functions in varied sea depths. These structures are tailored for certain environments and sea depths and other design considerations. 
  • 6.0K
  • 29 Jul 2022
Topic Review
Bonded Marine Hoses for Floating Offshore Structures (FOS)
By characterisation, a marine hose is a unique type of flexible riser used in fluid transfer. By definition, a marine hose is simply a fluid transfer conduit utilised in transferring, discharging, loading, and transporting fluids from an oil well to the platform of a floating platform or a floating structure. The fluid transfer system for bonded marine hoses is dependent on floating offshore structures (FOS). Single Point Mooring (SPM) systems are component aspects of the techno-economic design and FOS operation.
  • 5.5K
  • 28 Mar 2022
Topic Review
Pickering Emulsion Characteristics and Measuring Techniques
Surfactant-based emulsions require high emulsifier concentrations for stability and often rely on multiple additives to address various factors, which makes the surfactant synthesis and utilization of emulsions quite challenging. Pickering emulsions, which utilize solid particles for emulsion stabilization, have emerged as a promising solution for reservoir conformance control.
  • 3.1K
  • 12 Sep 2023
Topic Review
Waste Cooking Oil for Biofuel in India
Waste or used cooking oil (WCO/UCO) is a common source of trans fat consumed by Indians, leading to many non-communicable diseases like diabetes, hypertension, cardiovascular diseases, stroke, cancer, etc. In fact, out of 230 million MT of edible oil consumption, India is currently capable of producing only 3 million MT of biodiesel. Moreover, with the increased emphasis on the circular economy to improve rural employment opportunities, India should adopt a complete exergy analysis of biodiesel production from WCO.
  • 2.7K
  • 20 Feb 2023
Topic Review
Remediation of Petroleum Contaminated Soils
Due to the development of the petroleum industrial, numerous petroleum pollutants are discharged into the soil, destroying the structure and properties of the soil, and even endangering the health of plants and humans. Microbial remediation and combined microbial methods remediation of petroleum-contaminated soil are currently recognized remediation technologies, which have the advantages of no secondary pollution, low cost and convenient operation. This entry includes the sources and composition of petroleum pollutants and their harm to soil, plants and humans. Subsequently, the focus is on the mechanism of microbial method and combined microbial methods to degrade petroleum pollutants. Finally, the challenges of the current combined microbial methods are pointed out.
  • 2.3K
  • 28 Sep 2021
Topic Review
Microbial Enhanced Oil Recovery
Microbial enhanced oil recovery (MEOR) involves the utilization of microbes and their by-products, such as biosurfactants, biopolymers, biogenic acids, solvents, biogases, biomass, and emulsifiers, to stimulate the production of oil by mobilizing residual reserves.
  • 2.1K
  • 16 Oct 2023
Topic Review
3D Geological Property Modeling Methods
Three-dimensional (3D) geological property modeling is used to quantitatively characterize various geological attributes in 3D space based on geostatistics with the help of computer visualization technology, and the results are often stored in grid data. The 3D geological property modeling includes two main components, grid model generation and property interpolation.
  • 1.9K
  • 15 Jun 2022
Topic Review
Waste Plastic Thermal Pyrolysis
Pyrolysis is one of the most popular thermo-chemical treatment (TCT) methods known today. This is due to their immense impacts on the environment and their operational output. The significant role of pyrolysis with waste plastics as feedstock is trending. Most of these waste plastics which include high-density polyethylene (HDPE), low-density polyethylene (LDPE), polyethylene terephthalate (PET) and polystyrene (PS), have continued to render our environment, our health and oceans in deplorable conditions. This entry presents an assurance into the current findings of waste plastic thermal pyrolysis (WPTP) and revealed some common research gaps and misconceptions surrounding this field. 
  • 1.8K
  • 04 Mar 2022
Topic Review
Drilling Fluids for Extended-Reach Wells
In the planning phase of extended-reach well (ERW), special attention should be paid to the choice of drilling fluid. Selected drilling fluids for extended-reach wells should satisfy the same basic functions that are common to all drilling fluids, and they have to provide excellent reservoir protection. When drilling extended-reach wells, the following critical factors should be considered: hole cleaning, torque and drag, borehole stability, equivalent circulating density (ECD) and lost circulation. So far, oil-based mud (OBM) and water-based mud (WBM) have also been used in practice, but the emphasis is on the application of environmentally friendly additives.
  • 1.7K
  • 06 Apr 2023
Topic Review
Alkaline–Surfactant–Polymer Flooding Mechanisms
Chemical flooding, expecially  alkali–surfactant–polymer (ASP) injection plays an important role in enhancing oil recovery under many synergetic mechanisms, in which there are four main mechanisms that have been widely used, including improving the mobility ratio between the heavy oil and the displacing phase, lowering the interfacial tension between oil and water (IFT), altering the rock wettability (oil-wet to water-wet) and emulsifying oil and water. Laboratory tests and pilot trials of ASP injection showed that the oil recovery of the emulsified system is 5% more than the cases where no emulsions existed. 
  • 1.7K
  • 28 Nov 2022
Topic Review
Marginal Oil Resources
The term “marginal oil resource” refers to an oil reservoir that has hydrocarbon resource preservation but cannot meet the criteria of resources under the U.S Securities and Exchange Commission (SEC) standards. When oilfields step into their late life, most of their economic petroleum reserves have been well developed, and their focuses need to be switched to their intact marginal resources.
  • 1.6K
  • 14 Mar 2022
Topic Review
CO2 Pipeline: Accidental Releases Modeling
Carbon capture use and storage (CCUS) is considered an effective mitigation strategy to reduce the most challenging emissions from heavy industries and gas processing. The safe transport of carbon dioxide via pipelines is an important aspect for developing large-scale Carbon Capture and Storage projects. Dispersion modeling for heavy gas such as carbon dioxide is considerably different from natural gas. The set up for modeling simulations is more challenging than conventional natural gas pipeline for several reasons, such as the differences in thermodynamics that must be considered. Moreover, when the carbon dioxide is transported in dense or liquid phase, the rapid phase changing, and possible consequent formation of solids should be considered. Finally, the equation of state required for accurate prediction of parameters is generally different than the ones applicable for natural gas.
  • 1.6K
  • 27 Aug 2021
Topic Review
Logistic Handling of Deliveries at an LNG Terminal
LNG is a gas mixture of hydrocarbons in the following proportions: methane 87–99 mol%, ethane 0.1–5.5 mol%, propane 0–4 mol%, butane 0–2.5 mol%, nitrogen 0.02–1 mol%, and traces of sulfur (less than four ppmv) and CO2 (50 ppmv). There has been growing interest in fuel supply chains regarding transport safety and LNG reloading. This is due to the increasing consumption of this gas in the economy to create sustainable transport systems. Poland is in the phase of energy transformation, which increases the demand for this type of alternative fuel. For this reason, the number of logistic operations carried out by Polish sea terminals handling LNG deliveries is increasing.
  • 1.5K
  • 07 May 2022
Topic Review
Methods for Enhanced Oil Recovery from Reservoirs
Development systems, placement and choice of operating mode of wells essentially depend on the geological structure of the reservoir, its volume and properties of oils. An important role in this is the construction of a geological model of the production facility. The used hydrodynamic models of development are based on physical laws, about which oil producers sometimes don’t even suspect, and the authors of the models are not always able to convey it to the real producers. 
  • 1.5K
  • 26 Jun 2023
Topic Review
Proxy Modeling Highlighting Applications for Reservoir Engineering
Numerical models can be used for many purposes in oil and gas engineering, such as production optimization and forecasting, uncertainty analysis, history matching, and risk assessment. However, subsurface problems are complex and non-linear, and making reliable decisions in reservoir management requires substantial computational effort. Proxy models have gained much attention in recent years. They are advanced non-linear interpolation tables that can approximate complex models and alleviate computational effort. Proxy models are constructed by running high-fidelity models to gather the necessary data to create the proxy model. Once constructed, they can be a great choice for different tasks such as uncertainty analysis, optimization, forecasting, etc. The application of proxy modeling in oil and gas has had an increasing trend in recent years, and there is no consensus rule on the correct choice of proxy model. As a result, it is crucial to better understand the advantages and disadvantages of various proxy models.
  • 1.5K
  • 05 Sep 2022
Topic Review
Drilling Fluid Loss and Lost Circulation Control Technology
Lost circulation in fractured formation is the first major technical problem that restricts improvements in the quality and efficiency of oil and gas drilling engineering. Improving the success rate of one-time lost circulation control is an urgent demand to ensure “safe, efficient and economic” drilling in oilfields all over the world. 
  • 1.2K
  • 13 May 2022
Topic Review
Major Synthetic Fuels
A concise yet comprehensive overview of major synthetic fuels currently in production worldwide. The fuels are virtually categorised in an intelligible manner with detailed descriptions of their chemical equations, feedstocks, production processes, applications, and global market leaders.
  • 1.2K
  • 27 Mar 2023
Topic Review
Fracture Conductivity Damage on Post Hydrofrac Well Productivity
Hydraulic fracturing or hydro-frac fluids can impede well production due to the damage caused to the reservoir formation and fracture face, generated from adverse interactions with reservoir rock. Understanding the mechanisms of hydraulic fracturing, optimum treatment designs, and pumping/pressure profiles is critical for hydro-frac success.
  • 1.1K
  • 28 Oct 2022
Topic Review
CO2 Sequestration in Geological Formations
The geological storage of carbon dioxide (CO2) is the most effective and, in many cases, the only viable short- to medium-term alternative for considerably moving towards CO2 sequestration in geological sinks and, thus, lowering net carbon emissions into the atmosphere.
  • 1.0K
  • 04 Nov 2022
  • Page
  • of
  • 3
Featured Entry Collections
>>

Featured Books

>>
Encyclopedia of Engineering
Encyclopedia of Social Sciences
Encyclopedia of COVID-19
Encyclopedia of Digital Society, Industry 5.0 and Smart City
Video Production Service
Feedback