Submitted Successfully!
To reward your contribution, here is a gift for you: A free trial for our video production service.
Thank you for your contribution! You can also upload a video entry or images related to this topic.
Version Summary Created by Modification Content Size Created at Operation
1 The low cost of feedstock and the simple preparation process combined with the enhanced physico-chemical properties of biochar make its application more feasible for wastewater treatment. This review systematically presented an overview of different bioch
Manfred Lübken
 + 860 word(s) 860 2020-05-20 11:36:52 |
2 format correct
Catherine Yang
 + 3 word(s) 863 2020-10-28 05:05:48 |

Video Upload Options

Do you have a full video?
Send video materials Upload full video

Confirm

Are you sure to Delete?
Yes No
Cite
If you have any further questions, please contact Encyclopedia Editorial Office.
Enaime, G.; Baçaoui, A.; Yaacoubi, A.; Lübken, M. Biochar for Wastewater Treatment. Encyclopedia. Available online: https://encyclopedia.pub/entry/899 (accessed on 20 April 2024).
Enaime G, Baçaoui A, Yaacoubi A, Lübken M. Biochar for Wastewater Treatment. Encyclopedia. Available at: https://encyclopedia.pub/entry/899. Accessed April 20, 2024.
Enaime, Ghizlane, Abdelaziz Baçaoui, Abdelrani Yaacoubi, Manfred Lübken. "Biochar for Wastewater Treatment" Encyclopedia, https://encyclopedia.pub/entry/899 (accessed April 20, 2024).
Enaime, G., Baçaoui, A., Yaacoubi, A., & Lübken, M. (2020, May 22). Biochar for Wastewater Treatment. In Encyclopedia. https://encyclopedia.pub/entry/899
Enaime, Ghizlane, et al. "Biochar for Wastewater Treatment." Encyclopedia. Web. 22 May, 2020.
Biochar for Wastewater Treatment
Edit
This entry is adapted from the peer-reviewed paper 10.3390/app10103492

Biochar as a stable carbon-rich material shows incredible potential to handle water/wastewater contaminants. Its application is gaining increasing interest due to the availability of feedstock, the simplicity of the preparation methods, and their enhanced physico-chemical properties. The efficacy of biochar to remove organic and inorganic pollutants depends on its surface area, pore size distribution, surface functional groups, and the size of the molecules to be removed, while the physical architecture and surface properties of biochar depend on the nature of feedstock and the preparation method/conditions. For instance, pyrolysis at high temperatures generally produces hydrophobic biochars with higher surface area and micropore volume, allowing it to be more suitable for organic contaminants sorption, whereas biochars produced at low temperatures own smaller pore size, lower surface area, and higher oxygen-containing functional groups and are more suitable to remove inorganic contaminants. In the field of water/wastewater treatment, biochar can have extensive application prospects. Biochar have been widely used as an additive/support media during anaerobic digestion and as filter media for the removal of suspended matter, heavy metals and pathogens. Biochar was also tested for its efficiency as a support-based catalyst for the degradation of dyes and recalcitrant contaminants. The current review discusses on the different methods for biochar production and provides an overview of current applications of biochar in wastewater treatment.

Biochar thermal conversion modification adsorption wastewater treatment

1. Introduction

The world’s water resources are being deteriorated due to the continuous discharge of a large number of organic and inorganic contaminants such as dyes, heavy metals, surfactants, pharmaceuticals, pesticides, and personal care products from industries and municipalities into water bodies [1]. Most of these pollutants are highly persistent in nature and are otherwise convert into recalcitrant form [2]. The uncontrolled discharge of these pollutants is a concern because of their suspected negative effects on ecosystems [1][3][4]. Several conventional technologies are applied worldwide for the removal of wastewater pollutants including coagulation-flocculation, adsorption, membrane filtration, reverse osmosis, chemical precipitation, ion-exchange, electrochemical treatment, solvent extraction and flotation for the removal of inorganic pollutants [5][6][7][8]. However, these technologies suffer from a range of disadvantages stretching from inefficiency to remove pollutants at low concentration and to completely convert pollutants into biodegradable or less toxic byproducts, high energy and chemicals consumption, process complexity, high maintenance and operation costs, etc. [9][10][11]. An efficient and viable treatment process should meet both economic and environmental requirements to be marketed and applied in large scale. The incorporation of low-cost and available materials in different treatment processes could decrease the global treatment cost and increase the process efficiency.

2. Influence and application

Biochar as an eco-friendly and low-cost material generally produced from organic wastes such as agricultural wastes, forestry residues and municipal wastes has attracted increasing attention evidenced by its increasing use in different environmental applications. Organic wastes could be converted into char by different techniques including pyrolysis, hydrothermal carbonization (HTC), gasification, and torrefaction [12]. The conventional carbonization method for producing biochar is pyrolysis, while chars from gasification, torrefaction, and HTC generally do not meet the definition of biochar specified in the guidelines for the European Biochar Certificate (EBC). Owning to its enhanced properties such as rich carbon content, enhanced surface area, high cation/anion exchange capacity, and stable structure [13], biochar and its activated derivatives were reported as very efficient materials to remove various contaminants, including pathogenic organisms [14][15][16][17], inorganics such as heavy metals [18][19], and organic contaminants such as dyes [20][21. This evidence is however derived only from batch experiments, while a lack of information on the design and optimization of biochar-based systems for the depollution of drinking water and the treatment of wastewater is still largely existing. The ability of biochar to remove organic and inorganic pollutants from wastewater is directly linked to its adsorption capacity, which depends on their physico-chemical characteristics such as elemental composition, surface area, distribution of pore size, surface functional groups, and cation/anion exchange capacity, these physico-chemical properties vary with the nature of feedstock and the preparation methods and conditions [22][23][24][25]. For some recalcitrant molecules, which are present at low concentrations, the properties of biochar should be modulated to allow for a better removal efficiency. The common methods used for biochar modification are regrouped into two classes: chemical modification methods, which mainly include acid modification, alkalinity modification, and oxidizing agent modification; and physical modification methods generally performed by gas purging.

Although biochar showed widespread application prospect in the wastewater remediation, the potential negative impact of biochar application should be also analyzed. Depending on the nature of feedstock and the conversion technique adopted for its production, biochar may contain various heavy metals and other contaminants that could be released during its application in aqueous solutions [26][27]. Therefore, more studies are needed to investigate the stability of biochar and its correlation with the experimental conditions used during biochar production. In this review, the recent studies on the preparation, modification and use of biochar from pyrolysis and chars from other thermal conversion processes for the removal of organic and inorganic wastewater pollutants are summarized. The main mechanisms involved during the adsorption process, in addition to the recent advancement in the application of biochar as filtration media, support for catalysts, and its role during anaerobic digestion of wastewater, will be also discussed.

References

  1. Zulfiqar, M.; Samsudin, M.F.R.; Sufian, S. Modelling and optimization of photocatalytic degradation of phenol via Tio2 nanoparticles: An insight into response surface methodology and artificial neural network. J. Photoch. Photobio. A 2019, 384, 112039.
  2. Ayman, A.I.; Yahya, S.A.; Mohammad, A.A.; Amal, A.M.O. Studying competitive sorption behavior of methylene blue and malachite green using multivariate calibration. Chem. Eng. J. 2014, 240, 554–564.
  3. Bogusz, A.; Oleszczuk, P.; Dobrowolski, R. Application of laboratory prepared and commercially available biochars to adsorption of cadmium, copper and zinc ions from water. Bioresour. Technol. 2015, 196, 540–549.
  4. Sadat, M.; Hashemi, H.; Eslami, F.; Karimzadeh, R. Organic contaminants removal from industrial wastewater by CTAB treated synthetic zeolite Y. J. Environ. Manag. 2019, 233, 785–792.
  5. Vunain, E.; Masoamphambe, E.F.; Mpeketula, P.M.G.; Monjerezi, M.; Etale, A. Evaluation of coagulating efficiency and water borne pathogens reduction capacity of Moringa oleifera seed powder for treatment of domestic wastewater from Zomba, Malawi. J. Environ. Chem. Eng. 2019, 7, 103–118.
  6. Guillossou, R.; Roux, J.L.; Mailler, R.; Pereira-Derome, C.S.; Varrault, G.; Bressy, A.; Vulliet, E.; Morlay, C.; Nauleau, F.; Rocher, V.; et al. Influence of dissolved organic matter on the removal of 12 organic micropollutants from wastewater effluent by powdered activated carbon adsorption. Water Res. 2020, 172, 115487.
  7. Ejraei, A.; Aroon, M.A.; Saravani, A.Z. Wastewater treatment using a hybrid system combining adsorption, photocatalytic degradation and membrane filtration processes. J. Water Process. Eng. 2019, 28, 45–53.
  8. Nharingo, T.; Moyo, M. Application of Opuntia ficus-indica in bioremediation of wastewaters. A critical review. J. Environ. Manag. 2016, 166, 55–72.
  9. Cheng, Z.; Fu, F.; Dionysiou, D.D.; Tang, B. Adsorption, oxidation, and reduction behavior of arsenic in the removal of aqueous As(III) by mesoporous Fe/Al bimetallic particles. Water Res. 2016, 96, 22–31.
  10. He, J.; Li, Y.; Cai, X.; Chen, K.; Zheng, H.; Wang, C.; Zhang, K.; Lin, D.; Kong, L.; Liu, J. Study on the removal of organic micropollutants from aqueous and ethanol solutions by HAP membranes with tunable hydrophilicity and hydrophobicity. Chemosphere 2017, 174, 380–389.
  11. Fu, F.; Wang, Q. Removal of heavy metal ions from wastewaters: A review. J. Environ. Manag. 2011, 92, 407–418.
  12. Meyer, S.; Glaser, B.; Quicker, P. Technical, economical, and climate-related aspects of biochar production technologies: A literature review. Environ. Sci. Technol. 2011, 45, 9473–9483.
  13. Rizwan, M.; Ali, S.; Qayyum, M.F.; Ibrahim, M.; Ziaurrehman, M.; Abbas, T.; Ok, Y.S. Mechanisms of biochar-mediated alleviation of toxicity of trace elements in plants: A critical review. Environ. Sci. Pollut. Res. 2016, 23, 2230–2248.
  14. Reddy, K.R.; Xie, T.; Dastgheibi, S. Evaluation of biochar as a potential filter media for the removal of mixed contaminants from urban storm water runoff. J. Environ. Eng. 2014, 140.
  15. Molaei, R. Pathogen and Indicator Organisms Removal in Artificial Greywater Subjected to Aerobic Treatment. Master’s Thesis, Department of Energy and Technology, The Swedish University of Agricultural Science in Uppsala, Uppsala, Sweden, February 2014.
  16. Kaetzl, K.; Lübken, M.; Gehring, T.; Wichern, M. Efficient low-cost anaerobic treatment of wastewater using biochar and woodchip filters. Water 2018, 10, 818.
  17. Kaetzl, K.; Lübken, M.; Nettmann, E.; Krimmler, S.; Wichern, M. Slow sand filtration of raw wastewater using biochar as an alternative filtration media. Sci. Rep. 2020, 10, 1229.
  18. Yang, W.; Wang, Z.; Song, S.; Han, J.; Chen, H.; Wang, X.; Sun, R.; Cheng, J. Adsorption of copper(II) and lead(II) from seawater using hydrothermal biochar derived from Enteromorpha. Mar. Pollut. Bull. 2019, 149, 110586.
  19. Gwenzi, W.; Musarurwa, T.; Nyamugafata, P.; Chaukura, N.; Chaparadza, A.; Mbera, S. Adsorption of Zn2+ and Ni2+ in a binary aqueous solution by biosorbants derived from sawdust and water hyacinth (Eichhornia crassipes). Water Sci. Technol. 2014, 70, 1419–1427.
  20. Chen, Y.; Lin, Y.-C.; Ho, S.-H.; Zhouc, Y.; Ren, N. Highly efficient adsorption of dyes by biochar derived from pigments-extracted macroalgae pyrolyzed at different temperature. Bioresour. Technol. 2018, 259, 104–110.
  21. Park, J.-H.; Wang, J.J.; Meng, Y.; Wei, Z.; DeLaune, R.D.; Seo, D.-C. Adsorption/desorption behavior of cationic and anionic dyes by biochars prepared at normal and high pyrolysis temperatures. Colloids Surf. A Physicochem. Eng. Asp. 2019, 572, 274–282.
  22. Mohan, D.; Sarswat, A.; Ok, Y.S.; Pittman, C.U., Jr. Organic and inorganic contaminants removal from water with biochar, a renewable, low-cost and sustainable adsorbent: A critical review. Bioresour. Technol. 2014, 160, 191–202.
  23. Gai, X.; Wang, H.; Liu, J.; Zhai, L.; Liu, S.; Ren, T.; Liu, H. Effects of feedstock and pyrolysis temperature on biochar adsorption of ammonium and nitrate. PLoS ONE 2014, 9, e113888.
  24. Joyce, S.C.; Suzanne, B.; Ted, M.K.; Joseph, M.; Cliff, T.J.; Brad, J. Initial biochar properties related to the removal of As, Se, Pb, Cd, Cu, Ni, and Zn from an acidic suspension. Chemosphere 2017, 170, 216–224.
  25. Brassard, P.; Godbout, S.; Raghavan, V. Soil biochar amendment as a climate change mitigation tool: Key parameters and mechanisms involved. J. Environ. Manag. 2016, 181, 484–497.
  26. Kim, J.H.; Ok, Y.S.; Choi, G.H.; Park, B.J. Residual perfluorochemicals in the biochar from sewage sludge. Chemosphere 2015, 134, 435–437.
  27. Jin, J.; Li, Y.; Zhang, J.; Wu, S.; Cao, Y.; Liang, P.; Zhang, J.; Wong, M.W.M.H.; Shand, S.; Christie, P. Influence of pyrolysis temperature on properties and environmental safety of heavy metals in biochars derived from municipal sewage sludge. J. Hazard. Mater. 2016, 320, 417–426.
More
© Text is available under the terms and conditions of the Creative Commons Attribution (CC BY) license; additional terms may apply. By using this site, you agree to the Terms and Conditions and Privacy Policy.
Upload a video for this entry
Information
Subjects: Environmental Sciences
Contributors MDPI registered users' name will be linked to their SciProfiles pages. To register with us, please refer to https://encyclopedia.pub/register :
Ghizlane Enaime
,
Abdelaziz Baçaoui
,
Abdelrani Yaacoubi
,
Manfred Lübken
View Times: 1.7K
Revisions: 2 times (View History)
Update Date: 28 Oct 2020
Table of Contents
    1000/1000
    Hot Most Recent
    Feedback